I managed to change any of my files to an Office document in a zip file, and now I can't change it back again.

I tried a number of things compared to decompression, I right click on the folder and it suppose to say extract all, but it's not.

Hi LeoRogers,

Make sure you have this http://windows.microsoft.com/en-US/windows-vista/Show-or-hide-file-name-extensions enabled and just make sure that you rename example.zip to exemple.doc

Tags: Windows

Similar Questions

  • QuickTime player converted the video AVCHD in BDMV file and now I can't see it

    My QuickTime Player converted my video card SD of AVCHD in BDMV files and now I can't see it on my computer as the BDMV file opens with QuickTime Player, any other application.  Help, please!  Thank you!!

    VLC can play BDMV on a Mac files.

  • My navigation bar has been accidentally closed (file, tools, refresh, and stop buttons, address bar, etc.) and now I can't get it back. I tried pressing F11 as someone suggested, but nothing happened. Please notify.

    My navigation bar has been accidentally closed (file, tools, refresh, and stop buttons, address bar, etc.) and now I can't get it back. I tried pressing F11 as someone suggested, but nothing happened. Please notify.

    Use the ALT key on the keyboard if you can't see the menu bar, then

  • I downloaded my PDF file and now I can not find

    I downloaded my pdf file and now I can't find it on acrobat.com.

    Hello

    When you connect to Acrobat.com. go to the section of the file and the files should be there.

    And if the files aren't there and then during the time of downloading the connection was intermittent or probably you would have been temporarily logout due to browser problem, what is happening.

    Kind regards

    Ajlan Huda.

  • I changed some properties of file to my itunes files and now I can't find my music. When I click on the music folder it says still 6.8 GB however.

    Help, please. I changed the file attributes in the properties of my music folder and now all my music went from itunes, but when I click Properties it always says that the file is 6.8 GB of data.

    Click the Start button and click on music.

    On the top left click on organize,.

    Then folder and search options

    See section scroll down and check the box.

    Display hidden files, folders and drives,

    Apply and OK,

    You see your files now?

    Massive rearmament of the hidden attributes can be done by right clicking the (my photos / music...) the list and select Properties.

    Section of the tab general, check hidden near the bottom and click on apply.

    This will change all files to hidden, click Yes,.

    Then uncheck the hidden box and apply,.

    It will remove the attribute hidden all your files, click Yes,

    Then finally click on apply or save.

  • I consolidated my files and now iTunes can't find almost 200 songs in my library

    For a long time I have been adding new songs, I have download in a folder and then add the songs in the library iTunes via file-> add a file to the library and pointing to each new song. Last week, in order to make a backup of all my songs, in accordance with the recommendation of Apple, I gathered all my files in this folder (where there were songs in other folders I don't remember). However, even if the option "keep iTunes media folder organized (up files in folders of album and artist)" was NOT checked, it is exactly what makes iTunes: it began to place my files lost in the artist/album folders it consolidated.

    I cancelled the process when I realized what iTunes did, which would result in all hope, but that has not happened. Now, 250 on 2660 songs, I had have NOT been organized to artist/album folders (probably because I cancelled the process before they could be organized) are always in the song 'root' folder: http://prntscr.com/bvrvqt

    About 180 of those who have a "!" icon in my library stating iTunes cannot find the specified file: http://prntscr.com/bvrpl0

    When I double-click on one of them, iTunes asks me to manually point to the file, and when I do, it asks me to find the rest of the "!" from the songs I did. The problem is, although all the others '! ' songs are also in the folder 'root', iTunes simply cannot find an any of them on its own! Frustrating. If I add the missing files via file-> add files to the library, iTunes will create an entry duplicated them on the list, as if they were different files.

    No idea how I can return this mess and make iTunes to find the missing pieces? The only thing I can think to use SharePod program to save all the songs from my iPod to a new folder and Redo from scratch iTunes library from there, but then I would lose how my songs are displayed in the library (most recently added first), as all files would be added now at roughly the same time. I rather would not lose it.

    I use iTunes 12.3.1.

    Thank you very much!

    I suspect that iTunes has updated some of its references to point to the new locations that it would have copied files if you had not interrupted the process. See Re: files change media for advice on fixing systematically broken links. See make a split cell library for more information on the ideal organization to an iTunes library. Consolidation of copies any file outside the currently designated in the media folder and update iTunes so that it uses the new copy thereafter. Consolidated files are copied into the presentation standard of the artist and album folders that are also used for what it is torn, converted or downloaded with iTunes.

    TT2

  • Deleted a file and now I can't see my documents

    I have a laptop with two hard drives: my C drive is running windows and my E drive has all my applications and documents. Somehow, I deleted a file on my E drive. When I click the documents folder I get an error that says E:\ My Documents refers to a location that is unavailable.

    I don't think I deleted all my documents but a single file that gives me access to all my documents. Unfortunately, I do not know the name of the file I deleted and I emptied my trash.
    Could someone help me find a way to get this file system back?

    Hi JP Connors.

    Thanks for posting your question in the Microsoft Community Forum.

    Based on the information, you have put all the documents and applications in E drive and deleted an important file.

    It seems to be not not possible to recover a file if the Recycle Bin is empty too.

    You can use your favorite recovery tool search for third-party search engine check the same.

    Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope that information helps

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that no such interface supported.

    I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that: {26EE0668-A00A-44D7-9371-BEB064C98683} not this interface supported...

    Hi MAMARDA,

    Welcome to the Microsoft Vista answers Forum!

    I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

    (a) what version of Windows 7 use you?

    (b) what is the exact error message you are getting?

    Method 1: You can also try to perform a file system (scan SFC) verification tool. This tool will fix the system files are corrupted.

    Scan SFC enforcement procedure:

    1. click on the Start button

    2. on the Start Menu, click all programs followed by accessories

    3. in the menu accessories, right-click on command line option

    4. in the drop-down menu that appears, click the "Run as Administrator" option

    5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

    6. in the command prompt window, type: sfc/scannow then press enter

    7. a message is displayed to indicate that "the analysis of the system will start.

    8. be patient because the analysis may take some time

    9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

    10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

    11. once the scan is finished, close the command prompt window, restart the computer and check.

    Method 2: If this is a recent problem that has developed you can try to perform a system restore and check if it works very well.

    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    2. in the System Restore dialog box, click on choose a different restore point and then click Next

    3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

    4. click on finish

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    For more information, please follow the below given link:

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

    http://support.Microsoft.com/kb/936212/

    Method 3: you can try to start safe mode and restore the system, if you are unable to do it in normal mode.

    For a safe boot, you can follow the below given steps:

    1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

    Click the Start button, click the arrow next to the button lock and then click on restart.

    2. do one of the following:

    a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

    b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

    When you are in safe mode, follow the steps mentioned above to complete the restore of the system.

    Hope the helps of information.
    Please post back and we do know.

    Concerning
    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I changed my email online password and now I can't any message in the Mail application. How to upgrade the application Mail with my new password?

    I changed my gmail online password and now I can't any message in the Mail application. How to upgrade to the Mail application with the new password? I looked at the previous questions, and they were told to go to the preferences, accounts, then enter it in the password section. However, I can't find any password section.

    It would help enormously if you posted the OS you are using. 9.2.1 IOS has nothing to do with your MacBook Pro.

    In Mail, try to go to the window menu and choose connection doctor.

  • Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

    Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

    Hi sdr2014,

    I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

    So, let's try this:

    If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

    Please let us know how it goes.

    Best,

    Sara

  • Latest version of Lightroom will not download the RAW files of my D750. How can I get around that? Purchased Lightroom for its ability to manage RAW files and now very disappointed.

    Latest version of Lightroom will not download the RAW files of my D750. How can I get around that? Purchased Lightroom for its ability to manage RAW files and now very disappointed.

    Hi mgwno,

    Native support of Lightroom for the D750 has been added in the Lightroom update published 5.7 tonight.

    Version details:

    Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html

    Camera Raw 5.7: vailable.html http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a

    Kind regards

    Pete

  • I just downloaded Acrobat Pro after the trial and now I can't open any files...

    I just downloaded Acrobat Pro after the trial and now I can't open any files, when I click on the icon I get this message: the last time you've opened Acrobat, he unexpectedly while the reopening of windows.  You want to try to reopen his window again? If you choose not to reopen Windows, you may need to open and position the window.  There are 2 options: not to reopen or Reopen either choice leads to a window that appears upend says please wait while we are launching Acrobat and then window closes just quickly.

    I was able to successfully uninstall and reinstall to fix the problem. Thanks for your help Tariq. Excellent help and a quick response from you corrected my problem within minutes.

    Ward

  • I did a clean install of firefox 31 and now I can't get on any web site of Ustream, it works on IE and Chrome

    I did a clean install of firefox 31 and now I can't get on any web site of Ustream, it works on IE and Chrome.
    I tried all the advice I could find on the help section, but nothing works. I reinstalled everything is new so it's all of this to date, but not a single site Ustream.tv will load. I can put them on IE and chrome.

    The question may be because of your corrupt cookie (cookies.sqlite) file

    Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete the other files of cookie present as cookies.sqlite - journal in the Firefox profile folder where the cookies.sqlite file has been corrupted.

    You can also check whether DOM Storage is enabled.

    ______________________________________________________________________________

    Create a new profile as a test to see if your profile is the source of the problems.

    See creating a profile:

    If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem

    Profile backup and restore

  • Why can't I minimizes exceeding 2 Notepad in FF? I used to be able to minimize the notebooks as much as I wanted to. FF must have made an update and now I can't do that. Is there a setting I can change that will allow me to do?

    1. Question

    Why can't I minimizes exceeding 2 Notepad in FF? I used to be able to minimize the notebooks as much as I wanted to. When I search on a topic I keep several notebook open until I finished. FF must have made an update and now I can't do that. Is there a setting I can change that will allow me to do it again?

    Also at this time, the length of the sentence, I type has changed.
    There is no limit for how far she can extend to the right.

    Help, please. I'm not very irritable and don't understand Computerese.
    Please explain in English every day.
    Thanks in advance,

    bouquet

    Bouquet,

    Great to hear that your problem is finally solved.

    Regarding 2nd query you have raised, it is not possible to have the program running if you turn OFF the computer (it's like saying you want the bulb to keep bright despite off). When stop you the machine, you turn off the power... so there is no way that the current state maintained. When start the computer again the next time it starts on new.

    But there are 2 options that can help you with your problem: -.

    1 SAVE your changes before you close the program, and choose next time when you start the computer

       File ->Open (This way your work is preserved and you need not start afresh next time onwards)

    2. instead of turning off the computer, choose to Hibernate. When Hibernate you (and NOT CLOSE) the current state is preserved. This means that if you leave the notebook running he will remain in the same State when you next start your computer the next time.

    PS: as this forum is for the FF to discuss related issues, I propose that for further assistance e-mail me at my personal mail ID [email protected]' rather than discuss it here on this forum

    Now your problem is solved with kindness mark this as closed discussion (marking/choice of appropriate solution helped you)

  • Satellite 1900-303: changed the BIOS settings, and now I can't boot from the CD drive

    Can anyone help, I inadvertently changed the BIOS settings, and now I can't get the CD player to boot the pc back to the default settings, Windows xp seems to work ok as is the cd player.
    If someone has the original settings, I would be grateful for any help.

    Derek has soon

    Hello Derek

    Use the F2 key to enter the BIOS settings and change the order of boot devices. This option is under the STARTUP tab. Otherwise, you can insert the recovery CD when the unit is turned OFF. Turn it on and immediately press the C button. keep it down for a few seconds and unit is forced from the CD/DVD drive.

Maybe you are looking for