I need help/suggestions

Similar Questions

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• Hey, I need help☹️ my battery dies so fast and what suite 26% it's just farm off☹️

  Hey, I need help

  my battery dies so fast and when on 26% it's just... If turned off on me I need help

  Please read this article for suggestions, including turn off background App update.

  http://www.Apple.com/batteries/maximizing-performance/

  Also try to download the app battery life which is available for free on the App Store. Check the battery with it and if defective, schedule an appointment in an Apple Store for eventual replacement.

• Need help... New office which does not recognize the IP address

  I need help, my father, I bought a HP for Christmas to replace its old.  Problem is that I can't the computer to recognize the INVESTIGATION period, it says all drivers are working correctly, but still cannot connect either wired or wireless.  I have only addressed dells, it's my first experience with HP on Vista.  I need help fast because I'm about to go home and I would like to have him upward and running, any help or suggestions would be greatly appreciated

  I appreciate the suggestion and assistance.  After talking with tech support, they said it was actually the computer, I returned it and got a replacement and everything works fine.  Once again thank you to all who helped.

• need help to change my macbook pro hdd

  Hello. need help to change my macbook pro 13 "mid 2012 hdd. witch HDD I buy 1 TB 7200 RPM 2.5 witch should I choose sata2? or sata3? If you know any suggestions, it would be really appreciated. And when I add the new hard disk can you restore with lion at el capitan?

  Thanks for the help.

  A 2012 MBP has SATA 3 connectivity.

  If you want to install a new HARD drive, the best approach is to clone the new from the old HARD drive.  It will duplicate the original HARD drive which has likely El Capitan installed.  I suggest to use Carbon Copy Cloner to the process.  It is not free, but worth it because you can use it to create a backup disc drag.

  Here's the Setup instructions for your MBP:

  http://eShop.MacSales.com/installvideos/macbookpro_13_unibody_mid12_hd/

  Ciao.

• Satellite Pro A300-15V, I need help in the Organization of my startup list

  Hello everyone!

  I need help in the Organization of my startup list:

  (Why should Toshiba button support I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  Agent of filtering of Audio Conexant high definition (what is this program? Do I really need to start?)
  TOSHIBA Power Saver
  Toshiba Flash Cards
  RAID event monitor

  So, my friends. Could you give a valuable suggestion whether or not it is prudent to disable startup above entries? I want to speed up my laptop at the highest possible level.

  Thanks a lot for your time!

  Kind regards
  Osman.

  My laptop:

  Toshiba Satellite Pro A300-15V (PSAJ5E) => NOT have multimedia keys except the FN keys.

  > Toshiba Button support (why should I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  You can disable it. If your mobile phone does not support the multimedia buttons then this tool is useless.

  > ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  I don't know what would make this process, but you can disable this in msconfig-> tab start Mr. If it would take in the future, then you could turn it on again.

  > Agent of filtering the Conexant high definition Audio (what is this program? Do I really need to start?)
  I think that this is necessary. It could improve your audio

  > Toshiba Power Saver
  This is important. It s an additional saving of Toshiba option for Win 7

  > Toshiba Flash Cards
  This tool controls the FN keys.

  > RAID Event Monitor
  Hmm so you don t have two hard disks, then you can try to disable it too.

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Need help with updates!

  I will start with my features of laptops.
  
  -System-
  Manufacturer: HP
  Model: HP G62 Notebook PC
  Rating: 4.0
  Processor: AMD Athlon II P320 Dual-Core Processor 2.10 GHz
  RAM: 8.00 GB
  System type: 64-bit Operating System
  
  So the problem I have is that when I am games I am roughly pushing my computer to its limit and I want to accelerate as efficiently as possible. I recently upgraded my 4.0 GB 8.0 GB RAM, but that's all I've done so far. Keeping in mind the laptop is a bit outdated (I bought in 2010 or 2009). I don't know exactly what the best upgrades are, so why I post here for assistance. I am open to suggestions and advice help my computer!
  
  I know I should just buy a new computer, but I grew attached to it and I can't really have a desktop computer because I am a student and I need to be moving quite often.
  
  I would say that my budget is 200 to 400 $ CAD.
  
  My questions are...
  
  How can I find out what kind of processor would be best for my computer (if you know it please leave a link or something to show me what would work well)
  
  The upgrade of the motherboard would also help? (I also don't know what would be useful or compatible)
  
  TL; DR: I need help to upgrade my laptop and suggestions on what it takes to update and with what would be great!

  Unfortunately there isn't much you can do to make this portable game better. What you need is more powerful graphics and there is no way to get it. There is no better motherboard that you put in it. Ago slightly faster processors, you could install, but the cost would be very important and he would not really game better. Sell your laptop and add it to the CAD $ 400 you have budgeted for upgrades. There are some bargains out there right now on the computers of all kinds, including laptops.

  If you need any help post more come back.

• Need help for reading in parallel on the same interface and writing XNET

  Hello. I need help to configure CAN interface to write and read from the same interface.

  I use NI PXI-8513/2. I use CAN1 as interface.

  My had TO send status messages CAN every 100ms. I have to read in order to return akntoowlege to keep DUT CAN interface happy and not make mistakes.

  So, I want to open Strim Session and readall frames in the loop. At the same time, I need to be able to write in a frame HAD at the time...

  I only need to read one picture at a time too, but since I know the ID, I can pull it from the stream.

  What I'm confusing all is how to put in place the same CAN1 interface to be able to write and read in parallel.

  I think I would get errors that interface is already in use.

  Since I'm new to CAN, I was read and write only when necessary. But, sometimes I was getting errors on my messages. Sometimes I get message, sometimes miss me. But, when I run CAN test criminal as sniffer he sends and written every time. I was told it's because it recognizes all messages.

  I opened to suggestions of how best to implement the interface.

  I guess I can use CAN2 and separator to work around this problem, but I would use an interface if possible.

  Thank you

  Hi Rus,

  The XNET hadrware takes care of most of the low level of detials for you. The reading and writing of the circuits are both connected to the bus at any time. When you write to the hardware it will try to put a frame on the bus at the first opportunity he can. If the frame loses arbitration material re - will attempt to send the frame up is successful. Reception equipment monitor activity on the bus, regardless of what it conveys. The material received will usually throw a framework that was sent by communication equipment, but there is an Echo property pass to circumvent this behavior too.

  Take a look at the example of the expedition: MAY-> NI - XNET-> Sessions-> multiple Sessions Intro-> CAN even exit entry framework Port unique Point.vi. Keep in mind that this example you will need to use a second CAN interface to recognize frames, it transmits. I would recoment against the example CAN output Frame Single Point which would mimic your ECU if you choose a type of cyclic frame running this example.

• Computer laptop touch screen 15: need help - restore Partitions, OS system, start-up and drivers!

  [Need help]

  Device name: laptop touch screen, Energy Star, 15.

  Model number: 15 - f023wm

  Device status:
  [Grandma] "I broke the internet.
  [Me] "No, I have demolished just any chance I had as a computer programmer.
  I'll never do it to heaven now... »

  You want to come: difficulty this laptop!

  -Packing plant (Reset/retrieve)

  -Retrieve/Re-restore boot loader

  Retrieve/recreate/Re-restore all original scores.
  -Retrieve / Re - restore all the Original system & hardware drivers.

  -Retrieve/Re-restore Windows 8.1.

  -Possibly find computer Tech/Geek fellow/Pal.

  -Learn something new! (Not including the common sense).

  Explanation:
  -J' was too high as he tried to become the next Bill Gates and create a calculation method in which the processor completely laws of physics bi-passes.

  Topical issues:

  (1) I have little experience, I'm sure compared to most of the users on this forum; However, in the College computer Programmning.

  ---> Very adept in acquireing newly introduced information & request a great sense of understanding of puzzled, abstract and largely serious concepts. (It will be just a little easier than most to explain a simple fix).

  (2) I deleted all partitions, including the system files, System opperating, some methods of starting, all the drivers, and to add to the mess, the existing partitions are not yet check the size or formatting - I'm sure.

  ---> (Drive C is 400 GB;) Drive D is the main partition with only 20 GB)

  (3) any chance of installation/download are only feasible when my boyfriend does everything it does and 'fixed' the laptop.

  ---> Cell phone MAY start, can use internet and MAY be able to download 5 pictures before the system shuts down and the other requires a few hours to wipe the minimum amount of space on the hard disk before you reinstall Windows.

  (4) Windows 7 is the only OS (so far) that we are able to install; We have no other disks, but Windows 8.1, I think, was the original Opperating system and look forward to this return.

  (5) I don't know yet how I will receive notification here on these forums. I'm drunk at 05:59, so I'll find out tomorrow.

  ---> Assuming that I remember I wrote it.
  
  And I think that's all that I need a little help with if you want messages me or live chat to help solve this problem, I think that Skype is aloud; and in all the uncertainties, it is listed on my profile.

  Thank you, & your best.
  Caleb D. Parker
  @CiDiParks25

  CiDiParks25

  What will work restores your computer to its original factory state using HP recovery media.  It is a DVD and CD set that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  The link is on the software page and download drivers for your PC: http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7137590/model/7484025

  Once there, scroll to the bottom of the page and you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/
  
  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Need help of LabView on loops

  I'm doing a LabVIEW MyRIO project on how to display the values. Basically, I give myself a LCD screen and a keyboard. I'm supposed to show three sequences in the order. First, it must ask the user to enter a number on the keyboard to choose his field of interest. Then depending on the number, the user is prompted again to choose another number to specify the particular value he or she wants to watch. Finally, the value is displayed and the user can choose to return to the previous sequence interface by pressing a key. Each of the three sequences are able to "hold" until the user presses a button.

  I am able to attend the second interface using all loop inside a structure of the case, but I don't know how to start pressing a button to return to previous sequences. I need help on this particular part.

  Thanks in advance!

  The code that looks way too complicated for the problem you described.  Where is the state machine that we suggested to you?  Why so many useless people sequence structures?

• Need help with loops

  Hi all

  I am a beginner in Labview. If need help in loops. Please check the attached vi and suggest me the procedure I followed is effective or not. If this is not the case, correct me.

  Waiting for answer

  According to the commentary of diagram, table sizes are all 16, then here is everything you need:

  

  (Hmm, clips chiseled Booleans in the constant diagram, just ignore that)

  "Elements of an array AND" checks if all a real (upper thread)

  'The GOLD table elements' check if at least one is true. (all others)

• Need help for optical safety circuit.

  I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

  I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

  I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

  Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

  Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

  I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

  I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

  The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

  There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

  Lynn

• Need help to create a new Xbox account

  I deleted my Xbox Live account, a long time ago and I want to create a new. My old Xbox Live account is associated to my the Microsoft Account. But when I want to create an Xbox Live account, it says I have one using my that already have Microsoft Account. I'm sure I deleted my Xbox Live account and when I go on my Xbox Live account in the Internet, it says this, "Uh oh... that shouldn't happen." It seems that you have found a bug in the system. Please try again later. "I need help, I really want to create a new Xbox Live account using my course Microsoft Account. Thank you.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you in the correct forum.

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  See you soon.

• Need help for testing and practice the concepts of the server at home

  Original title: Hello team

  I need assistance with testing and to practice the concepts of the server at home... I don't have an option to test laboratory pls suggest possible ways that I can practice... need help... Please help

  Hi Sachinadi,

  You can ask your question in the MSDN Forums: http://msdn.microsoft.com/en-us/hh361695.aspx

  Thank you.