I need help with a technical problem

Similar Questions

• Need help with the huge problem of first Pro Photo. Confused beyond belief.

  Ladies and gentlemen, I've been at this for two days and am desperately needing help. At the moment my editing in Premiere Pro is completely blocked because of a bizzare picture problem. I am 100% glued and impossible to change.

  When I add a picture of my bin, it's ok. Then I add a second and it seems fine. But all the photos I add after this show as the first image. Never forget that the name of the file appears correct.

  The image itself, as well the thumbnail and the image in the timeline, etc. are just the first image.

  I restarted, rebooted, started new projects with new settings, cleared the cache first Pro... Nothing works.

  Video is not a problem. Only images. And now I'm dead in the water as a result.

  Look at this screenshot. See how the other as the second picture they are all the same? Well, they shouldn't be. But they are. And I'm stuck and cannot change at all as well.

  WTH is going on here?

  I have Premiere Pro 5 on a PC from Adobe Production Premium.

  Is a question I've had recently in the middle of editing that Premiere Pro will start in line video that has already been fulfilled previously.

  Begging for help here.

  

  Since you have never had this problem with image files

  in before cs5, I'd be inclined to turn to the source

  images that caused this problem to emerge

  If I remember correctly this problem, it has to do with the

  "image" header written to image files,

  and it also seems that the problem was unique to the .jpg images

  first merges by header information and duplicate images

  Open in ps and resave images re-written the header information

  for a State that is correctly read by first

  HAHAHAHAHAHAHAHAHAHAHA!

• Need help with work flow problem: a single e-mail notification non-stop.

  Hello
  
  We have created an approval Workflow custom PO based on the standard PO approval workflow and we had it for awhile now. Last week, we had a problem where the notification keeps on sending e-mail to suppliers and buyers. We discovered that the notification_id given in table WF_NOTIFICATIONS keeps having updated by the minute affecting the MAIL_STATUS Invalid then SENT back, then back to INVALID again and so on. We think that what is updated in this table is the cause, but so far we have not found what is updated. Here are a few of our instance.
  
  Oracle Applications: 11.5.10.2
  Database: 10.2.0.4 64bits
  OPERATING SYSTEM: AIX
  Custom workflow based on the 115.127.11510.16 review
  
  Customizations:
  -Created in custom notification that xx_email_po_pdf_supp based on EMAIL_PO_PDF_SUPP.
  -Creation of custom message XX_EMAIL_PO_PDF based on EMAIL_PO_PDF.
  -Added #WFM_CC to XX_EMAIL_PO_PDF.
  -Creating custom attribute XX_PO_WF_EMAIL_PERFORMER and set as an interpreter to the XX_EMAIL_PO_PDF_SUPP notification.
  -Created the custom XX_ADDTL_STARTUP_VAL function right after "Set Workflow start values of service." This function sets the #WFM_CC attribute and the XX_PO_WF_EMAIL_PERFORMER attribute.
  
  Not sure if the customizations have nothing to do with the question since not all POs have this problem. Anyone have this experience? Appreciate help with this.
  
  Thank you
  Allen

  Just to review this thread, can help you
  Workflow Notification Mailer is Spamming accounts of e-mail users [1293792.1 ID]
  Thank you

• Need help with solving a problem of component inking!

  I have not had any problems with the following programs (new laptop), at first with Windows Journal, sticky notes, handwriting recognition and the cutting tool. After six months, these programs do not work. Windows Journal: failed to start, error during initialization of the inking, sticky components: doesn't work do not restart 80004005, handwriting recognition: ink does not work on your computer now, snipping tool: ERROR now right does not not on your computer. I don't know if these problems are associated with Notea, trial version has expired. or somethig to do with Microsoft Office, I got office 2007 school (brought, because of specific classes taken) or else I did! I tried several thing in the help section and nothing works!

  It would really help if you could point me in the right direction!

  Thanks for your help!

  Ricky Miller

  Close this forum, see link below:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/f14d48b1-8753-4966-AE66-dcc248c24eb5

• Need help with the printer problem.

  * - Original title - help

  Why can I send pictures via bluetooth for continuous printer asking me a code years samsung knows anything about can any 1 hepl

  Hi Patrick,

  1. What is the brand and model of the printer?

  2. What is the exact message that you get when trying to print?

  3. don't you make changes to the computer and the printer prior to this problem?

  We can refer to this article and check if that helps.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Response with the State of the question and we will be happy to offer you our help.

• Please help with a technical problem 2209WA

  Hello

  I own a model 2209WA monitor. She was purchased in March 2010.

  Recently, I found that there was a visible gray streak in the center of the screen and ran a diagnostic test as described on the forum.

  I was not able to reproduce the problem on STFC, but on FPDBIST I found that the streak was no longer a gray spot on the left center of the screen on a gray background.

  I would definitely solve the problem because the problem is obvious enough to distract you. If not repairable by myself, I would ask for a warranty replacement, but I can't try to find the State of the order associated with my account, because it doesn't show any order beyond two years in the past, and I understand that the monitor had initially warranty period of three years. If there is any way I can get a copy of the draft of the order or shipping confirmation that I would be very grateful.

  As a result, more information on the monitor:

  Number of series PPID, monitor numbers 20 = CN-0H736H-72872-01 a-1R4L
  Monitor tested ports = DVI, VGA
  Video card and ports tested = AMD 4870, AMD 7950, DVI and VGA
  PC = generation model customized Intel X 79
  Operating system = Windows 7 Pro 64-bit
  Have you updated the video card driver? Yes, tested with catalyst Beta 12.11, 12.6 Legacy
  The monitor has been listed on the Device Manager

  Once more, any help in this matter is greatly appreciated.

  Viaduct,

  Contact Service customer Dell in your country. Provide the following applicable data-
  E-mail address:
  Name:
  Shipping address:
  Phone number:
  Reference Dell 20 monitor numbers PPID number: CN-0H736H-72872-01 a-1R4L
  Reason:
  If applicable, a link to a picture of failure: http://s14.postimage.org/3y0a2yvsx/2209wa_test01.jpg

  Since you don't have the order number on the spot, they can search in our database of DellServ using your data above for all of your customer and order numbers to find the order of monitor.

• I need help with a problem of file softdub.dll any answers or how to replace it?

  I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Need help to solve the problem with the margin at the bottom of the converted pdf file.

  Need help to solve the problem with the margin of the converted CEO down. What caused the change in format?

  Hi jerrio1949,

  There is no way to change the margin, you settle back into your original file & then convert to PDF format.

  Kind regards
  Nicos

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• Need help with my Y40-80? power management

  I get message to the center of the Action as follows:

  Compatibility problem between your power management system and Windows

  Your power management system is not compatible with this version of Windows.

  The name of the model of your power management system is ACPI Lenovo compatible virtual controller.

  Can anyone help please. I have windows running Y40-80 8.1 is a clean install of windows 8.1 x 64 all drivers are up to this day, just need help with the question above thank you

  Lenovo today released a new bios update for Y40-80 laptops, I did the update and, so far, the error message that I posted above has not appeared again so set the mite of update of the bios not sure yet, I'll keep up to date on this subject and write again soon

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an auto update that's simple to install, just get this error every time

  [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an automatic update that's simple to install, just get this error at each time HHHHEEEELLLPPPPP! Thank you

  I had the same problem.  But finally found a solution.  If your listing is similar to mine, then keep.  XP Media Center Edition 2005 (sp2).  AMD Athlon 64 x 2 Dual-Core, HP a1630n desktop computer.

  Go to the HP website, search for sp37394-XP sp3 Upgrade utility Microsoft for systems equipped with AMD processors.

  I had the same 0 x 80240036, 0x8024400a error, but realize my problem was really get manually downloaded sp3 and installed without continue loop crashing and not error messages.