I need your advice

Similar Questions

• Need your advice, choose the best update for first Pro CC

  Need your advice, choose the best upgrade.

  Because nobody can have a computer that runs all functions as quickly as desired, we have manage their it resources according to your needs, budget and for the money. Below is a fundamental issue related to Adobe Premiere Pro 2015 CC.

  Need for better visualization without jerky look of a stutter and overall better performance incease.

  Would I do better with? (Choose one please)

  1. Passing of an SSD to 2 SSD in RAID 0 configuration - cost about $350.
  2. Getting my video card NVIDIA GeForce GTX 560 Ti for a NVIDIA GeForce GTX 970 overclocked to 4 GB GDDR5 graphics card - $350.
  3. From Win 7 Pro 64-bit to win 10 Pro 64-bit.

  Please explain why you made your choice.

  
  

  Thanks in advance,

  Tom
  

  Tom,

  At this point, you're pretty much stuck to a GPU upgrade. You see, that the GTX 560 Ti is not is properly supported in first Pro CC 2015 when it comes to acceleration GPU of MPE. As such, you may experience random program crashes and/or repeated which are fixed only when you disable acceleration GPU of MPE and run first in software mode only MPE.

  The other improvements are out of the question: the i7 990 X CPU uses the chipset Intel X 58 now-seven-year-old, whose native Intel SATA ports are limited to SATA II (3 GB/s or 300 MB/s) flow. All support 3 SATA or USB 3.0 on motherboards that use such an old chipset comes entirely from complement third-party chipsets to companies such as NEC/Renesas and Marvell. And we know how slow the Marvell SATA 3.0 ports work are compared with native Intel SATA 3 implementation on newer chipsets. Unfortunately, a CPU upgrade would have exceeded the maximum budget $ 350 because both the CPU and motherboard (and probably RAM as well) should be replaced by such upgrade. And additional SSD upgrades are out of the question because newer SATA SSD would have been restricted by the sustainable maximum rate of 270 MB/s of SATA II.

  Therefore, the only feasible upgrade would be a new GPU for your system now five-years.

  Good luck in your quest to upgrade,

  Randall

• Considering ix4 - 300 d need your advice

  Hello:

  I intend to buy the ix4 - 300 d.

  But I have a few questions which need advice.

  Issues related to the:

  1. can I use it to back up my sites, facebook and Twitter data?

  2. is there a special procedure to use Seagate 3TO ST3000DM001 hard drive?

  3. should I update the firmware immediately?

  4. it seems that the warranty is 3 years. Someone did it before using it? How long can you recover your device?

  Thank you.

  Yes, it will be an advanced shipment so we will send you a replacement first unit, and then you will receive intsructions to create a shipping label and ship back us the defective unit in the same shipping box that was sent to you.

• Need your advice

  Hi gurus

  I tried to cover my script using the emp table.

  I have the following query:

  Query #1

  SELECT EmpNo, ename, MAX (comm),

  CASE sal WHEN > 1000 THEN 4000

  ON THE OTHER

  (Deptno SELECT distinct

  WCP

  WHERE empno = 7369)

  end aaa

  WCP

  Group by empno, ename, deptno sal;

  Query #2

  SELECT EmpNo, ename, MAX (comm),

  CASE sal WHEN > 1000 THEN 4000

  ON THE OTHER

  (Deptno SELECT distinct

  WCP

  WHERE empno = 7369)

  end aaa

  WCP

  GROUP BY empno, ename, deptno.

  CASE sal WHEN > 1000 THEN 4000

  / * OTHER -receive error message when I opened this comments

  (Deptno SELECT distinct

  WCP

  WHERE empno = 7369 * /.

  end, sal;

  In my query #1 aaa field is a calculated column so I can't use this column in my group by clause in my first request, I put all the columns in the group by clause that is included in my select as well as in my statement box.

  In my query #2 aaa field is a computed column, so rather than put my columns of the clause cases (see comments) individually in my group by clause, I put all the instruction box except Else condition. Unfortunately, when I try to put another condition in my group by clause, then I get the error.

  My question is that what query is better application #1 or #2 of query. If query #2 so how is that I put other condition in group by clause. Really appreciate your answers. Thank you

  Hello

  979596 wrote:

  Thanks for the reply from Frank, at the moment, I get the correct answer for a query # 1 but I wonder this approach of rite to use all the columns in the case statement separately group by clause? for example, is it a rite way to handle the cases if clause meet with feature synthesis such as Min and Max... Please advice.

  Sorry, I don't understand the question.

  Also, I do not understand the request.  Why do you need to aggregate functions or GROUP BY all in this problem?  EMP.EmpNo is unique, including empno in the GROUP BY clause means that each group will contain only 1 line and will tell you as well

  SELECT ename, empno, comm

  CASE

  Sal WHEN > 1000 THEN 4000

  () OTHER

  SELECT DeptNo

  WCP

  WHERE empno = 7369

  )

  END as aaa

  WCP

  ;

  Assuming that nothing in the GROUP BY clause was unique, what would be the problem with a saved query?

• Professional video equipment and Photo - need your advice work station!

  I try to buy a high-end video and photo editing station and I am really puzzled as to the amount of options, but the absence of advice available in this area.

  I am a professional photographer, getting more professional video work. However, it seems that the video is much more demanding than still photo production, so I'm sure that everything which works well for video works surprisingly well for still images. So, let's focus on the video.

  We turn our video mainly on Canon 7 D and 5 D Mark II cameras in full 1080 p. My question was until now mainly that once I have added 2-3 video tracks, some transitions, an effect or two and a plugin of stability (as prodad mercali) on my calendar, I see is no longer my preview in real time as it is constantly stuttering while audio plays directly through making it difficult and a lot of time to complete projects full.

  Thus, the goal is to create a machine that can make previews in real-time, without falling into excessive and just buying exaggerated. I can't find any articles on what I need to achieve this goal. I'm looking for so to each of you, the pros for help.

  For the new machine, we'll upgrade CS5, so here's what I'm looking for:

  Budget: $5000 or less (lower the better, no exaggeration)

  1) mobility -I need a laptop powerful workstation that does everything, or I'm going to need a desktop computer powerful workstation, with a portable powerful decently for work on the go.

  2) real-time preview -ability to add multiple layers of video/audio, video effects and effects plugin while being able to always look at the preview in real time (no stutter)

  3) quickly made -fast, but it does not need to be as quick as lightning

  4) long term reliability -if I can customize a Dell system and maybe add some parts after market that would be the better so that I can have the most all wrapped up by the same 3-5 years warranty

  5) color reproduction - if mobile, I need a screen that reproduces the colors very well as a display of RGB WUXGA LCD

  Additional thoughts/Questions

  (1) do I need map series Quadro/over-pants or taken consumer charge cards as the GTX470 will do the job?

  (2) how know exactly what card is supported if the #s card is off slightly, as if it lists the GTX470 as being taken in charge, that's the GTX480 caught in charge?

  (3) what is the best for long term performance, attacked the SSD or attacked raptors?

  (4) what is the optimal configuration of complete raid 0 hard drive, or say a disc of starting 10 000 rpm + 2 discs 10 000 rpm of searched (raid 0) for the readers of the edition/work?

  (5) are there any resources comparing differences in performance practices of real life between the high-end as the Quadro cards and over-pants series all by doing real-life tasks such as rendering, video editing, Photoshopping, etc.?

  Possible configuration

  This is the main form on a laptop computer Dell, I put in place, do not know what is necessary and what is not:

  Dell Precision M6500 Mobile reference

  Intel Core i7-840QM Quad Core 1.86 Ghz, 8 MB of Cache

  1 GB Nvidia Quadro FX 3800M

  16GB DDR3 1333 Mhz SDRAM (installed aftermarket)

  17 "widescreen WUXGA RGB LCD (1920 x 1200)

  RAID 0 with 2 drives hard - 2 x 256GB mobility Solid State Drives (512 GB of total disk space)

  Thank you all so much for your help!

  -Pye Jirsa

  Lin and Jirsa photography partner

  Pye,

  About the FX 3800 M, it is currently not a GPU supported offering for laptops. The Quadro FX 3800 model for desktop computers IS a solution of support, but not the mobile Variant. We work closely with Adobe on GPU configurations and have constantly been adding extra GPU with each release of Premiere Pro so its our hope to see added in the future, but at this point, it is a solution not supported.

  The performance is difficult to characterize, because there are many variables that come into play. All the GPU, you mentioned are excellent performers and on a desktop platform, all are fully supported solutions.  On a computer laptop platform the Quadro 5000 M is the only solution to support, so if that's important to you (and it's really something to think about from a point of view system property) that will reduce your concentration. Well as on the side of the office, I recommend the Quadro 4000 instead of the older Quadro FX 3800.

  In addition, there are several parameters beyond a few performances. Stability is the main Director behind Quadro professional graphics solutions. Products Quadro are specially tested and manufactured to provide a positive return on the property by providing a long life and stable performance by using the top professional applications.

  Sean

  Director of technical Marketing

  NVIDIA

  Sean Kilbride

  Director of technical Marketing

  Workstation Product Reviews

  P: 408.486.2313

  F: 408.486.4313

  C: 510.673.4570

  [email protected]

• Just bought a new laptop and need your advice!

  Hello. I bought this mobile workstation to change while I travel. Please let me know if I've made mistakes with my selection of material. Or if I could improve it more. I've mainly use for editing with first CS%.5. Rendering with Adobe Media Encoder, and using After Effects.

  Thank you

  Dell Precision M6600 Mobile Workstation

  Dell Precision M6600 grey aluminium

  Intel Core i7-2760QM processor (2.40 GHz, 6 M Cache)

  Energy Star 5.0 / EPEAT Gold

  17.3 '' FHD (1920 x 1080) with PremierColor IPS RGB glare, backlit by LED technology

  Standard palmrest without fingerprint reader & contactless smart card reader

  Application for camera - Kit

  Back cover of the LCD screen LCD - RGB

  Integrated FHD (2MP) Webcam with digital Microphone - RGB LCD screen

  Plant shipping information

  System pilot, Precision M6600

  Update the Dell Client system

  Reference Dell Feature Enhancement Pack (DFEP)

  Regulatory label for Non touchscreen systems

  The guaranteed Australia fact sheet

  Shipping system, Mobile Precision M6600

  (English, Indonesian, Thailand, Cambodia) end user license agreement

  Win 7 Info Label

  Intel (r) Core i7 vPro (TM) processor label

  Camera software

  Contains resources DVD - Diagnostics and drivers

  Documentation, Precision M4600/M6600 (English)

  16 GB (4x4Go) 1333 MHz DDR3 SDRAM

  512 GB (SATA3) mobility Solid State Drive

  Windows Live Essentials

  8 X DVD +/-RW Slot Load Drive

  Drive bezel - DVD +/-RW Slot Load optical

  CyberLink PowerDVD (TM) 9.5

  Roxio (R) Creator Starter Media Kit

  Roxio (R) Creator Starter

  CyberLink PowerDVD (TM) 9.5 Media Kit

  Power cord (ANZ)

  3-year warranty, battery 9-cell (87Wh)

  Information integration

  Order ready Tag ProSupport

  IF EMEA DELL LOAN MOD INFO

  IF, MOD, INFO, CSR, ELIGIBLE

  DRC Service tag

  NVIDIA Quadro (R) 5010 M with 4 GB of GDDR5 memory

  AC adapter 240W

  Intel Centrino Ultimate - N 6300 (802.11 a/b/g/n) Half Mini Card

  Backlit keyboard (English) internal double score

  Genuine Windows 7 OS Label

  Windows 7 Professional COA Label

  Windows 7 QFE

  FYI ONLY: Genuine Windows 7 Professional 64 - bit (English)

  Genuine Windows 7 Professional 64-bit (English)

  Windows 7 Professional 64 - bit Media Kit (multi-language)

  Access to Data Protection Dell (TM)

  Intel vPro Technology Advanced Management Features

  Reference Dell Backup and Recovery Manager (DBRM) V1.3 for Windows 7

  No required Installation Service

  Technical support

  E-waste compliance

  # Warranty: Year 2-3 (NBD)

  # Warranty: Year 2-3 (POW)

  # Warranty: First year (NBD)

  # Warranty: First year (POW)

  Enterprise-wide contract: 7 x 24 Technical Support & Assistance: 3 years

  3 yr overall contract: next business day on-site Service

  Package: NBD Onsite Service, 3 years

  All hard drives, RAID configuration

  Battery door guaranteed 1 year from the Date of the invoice (unless, of course, select guaranteed 3 years battery is

  bought)

  Visit http://support.dell.com/prosupport for technical support.

  Charges (Australia) NB-OS-CTO handling & insurance

  Precision (TM) delivery Charges (AUSTRALIA)

  If you have a 128 GB SSD boot and a second drive internal SATA 7200 RPM, you can get for your application and be able to work 30 to 50 minutes without a wall outlet. I would start there and if it's too slow, then consider adding an eSATA drive, but then it takes a wall outlet. I can't say that you NEED a third disc, you will need to determine than yourself and weigh speed advantage against either subordinate to a wall outlet for the juice.

• Need your advice and help

  I devastated m!
  I live in America, but I need all the help I can get!

  Last summer, I bought my first NEW Toshiba laptop, sure that he would be the BEST computer I've ever owned! Well, that was until the NEW HDD has not only three months later, making me lose ALL the images of my childhood! Ready to recover all these photos, I put off to send the laptop to Toshiba for repairs as my father and I worked for months to try to extract the data from a failed hard drive. We spent many hours and a lot of money, and nothing has worked. Resigned, I called Toshiba to get my hard drive replaced (my computer was under warranty). Although the first lady was unfriendly and rude, the case manager I talked after him was the image of professional, she apologized profusely and said: second day of air would be sent a box to pick up my computer! She promised that the repair would cost nothing, take only a week and returned the second day of the air! I was happy!

  Two days later, I registered for the box when he arrived, packed my computer and sent it to Toshiba. I received a call to let me know that they have received and a call a week later to say it had shipped and was heading towards me! It had to happen on Tuesday, so I stayed home all day not wanting to miss his arrival, imagine my surprise when not only did he not arrived Tuesday, he didn t happen several days after as well!

  On Friday, I was quite worried call Toshiba. When I explained that I would have received my computer now, they told me that UPS had rendered the computer at my door on Tuesday! My Doorbell never rang and was never asked to sign for a package! Toshiba said that they did not apply for a signature on my laptop $800! They said that it was the fault of UPS s and I should talk to them! So, either he was delivered and stolen or never delivered at all!

  When I called UPS, they apologized for the confusion and said that Toshiba would have to be the one to bring it to the missing point! Then I called once more where they told me there was nothing they could do and that I would have to file a police report and talk to Toshiba repair service. I been waiting for 45 minutes for service and nobody has ever said! When I finally hung up and called back case manager, I spent more than an hour on the phone, explaining that even if I understood that it was an opportunity very rare for Toshiba, I could not afford to spend hours waiting for a Department that did not, only to try to solve a problem that could have been avoided on Toshiba end of s if they requested a delivery signed on a very expensive item! And they would not have had to face this problem if they were not given a defective item in the first place! They told me to wait for Department of repairs to call and that I had to file a police report, provide documents and wait for Toshiba and UPS to hash things.

  Well, the repair Department has STILL not returned my call, although several messages have been sent to them to ask them to call me! I am a student and desperately need a computer to take care of the College work, taxes, planning and other! I can't afford the many months it will take to get this sorted out in addition to the EIGHT months that I have owned a computer brand new broken! I put t know what to do!

  My mother suggested that I use my prepaid Legal Service to resolve, but I d really rather not venture that disorder can anyone suggest a solution? It seems as if it was too rare an opportunity that Toshiba says it is, he n t be as big of a deal just replace my computer which should not have failed in the first place!

  Thank you very much
  Channing Trainor

  Hello

  Sorry to hear about all this.
  I would like to offer help, but you are in America, and I don't know how it works here.
  Maybe you should this post on the forum we Toshiba and chat about it with people who live in the United States.

  Here is the link - http://forums.toshiba.com/t5/Laptops/ct-p/c_laptops/tshb

  In any case, I recommend you contact Toshiba hotline and ask for help.
  They have accurate information about the provider of service and clarify this point with them. I also believe that each service provider has the opportunity to check all deliveries and to clarify the situation.

  I'll keep my fingers crossed for you!

• Need your advice on the creation of the image

  Hello

  I am trying to create image of my partition c on Satellite A100-529 - no luck. Norton ghost freezes (started from the BACK) just after the start, could not load g4l (panic kernel), partimage, being a part of the CD SystemRescueCd package does not see the hd disc! Has anyone tried using any software creation/restore image other than the Toshiba Recovery CD? A bit of luck with it? Please let me know.

  Thanks in advance for any help on this matter.

  Hello

  Well, I've never used the ghost to create a partition and I put t know why it of not possible to create a. I use ghost only to create an image.
  But personally, I prefer the Image 8 Partitions. This is a very interesting tool and in my opinion the best for creating partitions.
  You should check it out.
  http://www.Soft32.com/download_151.html

• BlackBerry 10 please I need your advice?

  I've heard many bad reviews about the 10.1.0.273 update available - I'm curious to hear all comments on the upgrade is good or bad - don't have still not improved - worried about spoiling a good OS running.

  

  In my opinion, Yes, you should move from 10.0 to 10.1

  Make a back up first using link. I'm doing three separate backups, one for each of my settings, data media and App.

• On the partititon... need your advice

  Hi Master,

  This is the first question.

  I have a table with partition of beach on the data column. I have 3 partitions now. Jan, Feb, mar, now I wanted to insert data months apr. There is no partition. where are the data?

  a second

  I have a table with partition of beach on the data column. I have data with data of 1st, 2nd, 3rd, 4th month. then I inserted 6 months of data. Now, I wanted to store data 5th month? How is it possible?

  I have little knowledge about partitions. Please explain to me.

  Concerning

  AR

  And if you want to insert data apr translate APR score on-the-fly creation and insertion of data apr there you should use range partitioning.

  SY.

• Need your advice - the user name and roles

  We are the OEM deployment within our Organization.  There is a special requirement on business unit to have several names for the same person, with different roles.    Which means 'employee_1' will be 3 id for several roles such as employee_1_Administrator, employee_1_Operator, employee_1_Monitor!    Is - this recommended by Oracle? or it companies set up such a system? (I know it's technically feasible, but I'm confused as it is a best practice).

  Any suggestions or pointers are really appreciated.

  Vijay

  No, it sounds like a recipe for chaos for me I recommend several ROLES by user.  But if you have several users, they will constantly be logged in and out based on what targets that they manage and which kind of defeated the purpose of having a "Enterprise Manager" tool in my opinion.

  The way in which users EM are roles assigned, allows you to provide multiple roles functionality that can easily be revoked should change responsibilities.

  So create 3 roles:

  Administrator

  Operator

  Monitor

  Give the 3 roles employee_1

  I'd be interested to hear the conditions for this... but the only case that I heard in other companies is for a small number of people who have administrator-level privileges.  UserA was UserA account + userA_Admin.  Must not use their account "admin" for normal each daily tasks (management db, work planning, etc.) but only when necessary for higher level privileges.   Again, it is possible, but difficult.   Only 1 of about 40 clients that I worked with it.

• Hi John, need your advice

  Hi John,.
  
  
  Please could you suggest can download Informatica for purposes of learning.
  
  
  
  Thank you
  N Kumar

  Hello

  It is available on delivery .

  For 9.3.1 is under "Hyperion Performance Management and BI"

  Hyperion Data Integration management version 9.3.1.1 installation Microsoft Windows x 86 Informatica PowerCenter 8.1.1 (part 1 of 2)
  Hyperion Data Integration management version 9.3.1.1 installation Microsoft Windows x 86 Informatica PowerCenter 8.1.1 (part 2 of 2)
  Management card Hyperion data integration for planning Release 9.3.1.1 Informatica PowerCenter 8.1.1 x 86 Microsoft Windows Installer

  11, it is under "Oracle Enterprise Performance Management"

  Hyperion Data Integration management version 11.1.1.1.0 installation Microsoft Windows x 86 Informatica Power Center 8.1.1 (part 1 of 2)
  Hyperion Data Integration management version 11.1.1.1.0 installation Microsoft Windows x 86 Informatica Power Center 8.1.1 (part 2 of 2)

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• (For Microsoft Emplyee) Apology for Ungenuine Windows 7 Ultimate second Post, need more advice, or audit)

  I have a laptop with Windows 7 Home Basic pre installed, it was authentic 100%. At that time I was 12, I don't know what Windows Anytime Upgrade (I don't know about the authentic software, pirate, crack, serial, k product key, etc because I was 12). I entered, and there was a lot of function of the new Windows 7 (Home Premium, professional, ultimate). I tried the product key for Windows 7 Ultimate upgrade (just try, you know about the time that was my first laptop...), I found it on a website, not a keygen, crack or hack, it is only the serial number. I try to enter the upgrade key Windows 7 Ultimate for Windows Anytime Upgrade. First of all, the upgrade to Windows 7 Ultimate cancelled because the series was not valid. So, I canceled it.

  Suddenly, when I restart my pc, it is automatically upgraded to Windows 7 Ultimate! It's weird! I waited and my PC has become Windows 7 Ultimate... I used the Windows Update, and it is perfectly works like a charm! I did not know why the non-genuine Windows 7 Ultimate could not detected as not authentic, I used it for almost 2 years as a truly authentic Windows, no window pop up, no warning non-genuine, it's like the real genuine Windows.

  When I was 15, I recently know that no authentic (cracked, steal the serial number) is an action contrary to the law, 'hurt' Microsoft Corporation and the true owner series I entered... I feel guilty...

  "I apologize (very apology) for Microsoft Corporation and all employees of Microsoft, especially under Windows, because I use non-genuine Windows 7 Ultimate edition (upgrade of Windows 7 Edition family Basic)." I don't know anything at this moment here because I was still 12. »

  Now, I have to my WIndows 7 Home Basic with the product under the laptop key... But, the problem is, I get the Windows 7 Home Basic, Windows 7 Ultimate edition not authentic, I downloaded it on the third party site, it's 100% clean official Installer for Windows (not cracked, hacked, or more). I created the bootable USB and installed on the laptop.

  My question... Is my Windows 7 Home Basic (now has been updated 10 Windows entitled Digital Home) become non-genuine (in religion: illegal, prohibited, illegal) because I have no money to buy the actual key Windows 7 Ultimate upgrade... I'm really very sorry...

  Please accept my apologies to Microsoft Corporation and need your advice for me...

  Thank you

  I'm not a employee of MS, but recognized by the company as an MVP for six years.  Your question has touched me because of your honesty and good character.

  We all make mistakes, and you have obviously learned and right.

  If you reinstalled or recovered the version that came with the PC, then updated this licensed version of Windows 10, you should have nothing to fear.

  Are you satisfied with your performance of Windows 10?  If so, I would like to put a Backup system of Image so you can easily retrieve it in 20 minutes using a recovery disk.

  If not you can always do a superior Clean install Windows Upgrade 10.

  Even if you don't do this now, there are many tips in the link to ensure the best possible installation.

  Let us know how it goes.

• I need your help for a pc after: PPBM7

  Hello friends,

  I need your advice to optimise the purchase of my pc, it is for the Assembly of 4K with GH4, canon sony FS7 and H.264.

  I use adobe and adobe after plugin effects with some DC (Colorista, lumitrie, Twixtor and stabilization)

  I would like from the documents that I chose and examine if the processor board or graphics not to exaggerate or otherwise choose more powerful?

  Here is the pc:

  - Motherboard: Gigabyte GA - X 99 - SLI

  - CPU fan: Noctua NH-U12P SE2

  - CPU : Intel Core i7-5960 X

  - Configuration of hard drives:

  -Samsung 850 Pro 256GB SSD: OS, program, pagefile

  -1For Samsung SSD 850 PRO: Mediaprojects

  -Samsung SSD 850 Pro 500 GB: media Cache

  -Samsung 850 Pro 256GB SSD: Preview, export

  - Power supply: Corsair 850W ATX 80PLUS Gold RM850 (5 years warranty Corsair) Corsair RM850 80PLUS Gold

  - Memory: 32 GB Corsair Vengeance LPX (2 x 16 GB) DDR4 2400 MHz CL14

  - Graphics card: GTX Superclocked + ACX 2.0 Ti 980 + (X titan?)

  Thanks in advance for your help.

  Since often is only a single connection to m2, it may be better to wait until early October, when the new Samsung 950 Pro SSD should be discontinued. They will draw on the 850 Pro instead of the EVO, which is used in the SM 951. The new Pro 950 will be based on 32 layers of VNAND as the 850 Pro and will be available in versions is only. They promise even more efficient than the SM 951.

• Yahoo mail compose page announced the Indian Railways. Same is the case with some Gmail site. For this reason, it is difficult to compose mail. I need your help to clear advertising so that I can compose mail on the blank page, cordially. Maes

  Yahoo mail is normally empty. One can type mail in the blank part of . In my case the Compose page has rail logo. because I can't type my mail. Even if there is no problem in gmail-INBO isn't the case with Gmail site "A Google approach to email" or make up may site.
  For this reason, it is difficult to compose mail on yahoo mail. I need your help to clear advertising logo so that I can compose mail on a white page, cordially. eldiablo kumar

  You can also try to install Adblock Plus with Easylist subscription and check

  • https://addons.Mozilla.org/en-us/Firefox/addon/Adblock-Plus/