I only have photoshop and not Ai.

Similar Questions

• I have a license of creative cloud in design and I use a no cloud of photoshop 5.5 version. I only have photoshop installed and works on both computers. When I connect to internet I can't use photoshop on my main computer. Maybe it's that I had

  I have a license of creative cloud in design and I use a no cloud of photoshop 5.5 version. I only have photoshop installed and works on both computers I know. My desktop and my laptop. When I connect to internet, I am now unable to use photoshop on my main computer. It may be that I had photoshop on an old computer that I use is no longer, but I'm not sure. How can I get this sorting? Do I know if I have an activated copy on an old computer (which has been scrapped) and get it off?

  If you had Photoshop working already on the machine, then it probably isn't a problem of activation.

  If you do not have to Support Adobe disable to you it must be done for all installations since each machine cannot be targeted by them.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

  This could apply: how we prevent cloud creative resume my perpetual license CS6?

  https://forums.Adobe.com/thread/1584746

• I now have the complete Adobe CC license, but I mainly use only CC Photoshop and Lightroom CC. How can I get my driver's license?

  I now have the complete Adobe CC license, but I mainly use only CC Photoshop and Lightroom CC. How can I place my full CC to the version of photographers CC license?

  I don't see in my Adobe account opportunities to make changes.

  https://helpx.Adobe.com/creative-cloud/help/cancel-membership.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

  Creative cloud plans

  https://creative.Adobe.com/plans

• Is it possible to have a plan where I only use Photoshop and InDesign without Lightroom?  If Yes, how much would it cost?

  Is it possible to have a plan where I only use Photoshop and InDesign without Lightroom?  If Yes, how much would it cost?

  the most economical would be the only application with the id and the Pack of photographers with ps and lr for ~ $ 30 / mo.

  for ~ $50/mo, you can get the full suite of adobe programs.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

• I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing

  I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing that?

  Hi Kelly,

  Maximum machines, the license can be activated is 2. Somehow, it seems that on your side the same license can be activated on any 3rd machine as well.

  Activating the license on any other machine, please select the option to disconnect all other devices and try again.

  Reference: connect and disconnect activate Cloud Creative applications (deactivated)

  Kind regards

  Sheena

• I have photoshop and it's on my laptop, I want to put it on my MAC how can I do this? Should I still buy it?

  I have photoshop and it's on my laptop, I want to put it on my MAC how can I do this? Should I still buy it?

  You can install/activate on up to two mac computers.

  just dl and install using the serial number of your mac.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Print only the attachment and not email

  Hello

  Is it possible for me to define the eprint so that it displays only the attachments and not the email too?

  Hello

  I fear the answer is no.

  All content is automatically printed and it cannot be changed.

  You cannot print attached without also printing the email.

  You can find the terms of service listed in the frequently asked questions (FAQ) below:

  http://support.HP.com/us-en/document/c03721293

  Kind regards

  Shlomi

• How the identity if one table used only by synonyms and not by any other subprogrammes in a schema?

  Hi people

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  The ALL_DEPENDENCIES view has hierarchical information based on object_id

  The view object has the object_type.

  Create a hierarchical query on the first view and attach it to the second view.

  Or you can use the utldtree.sql file in the installation of the DB admin folder. Comments initially show you how a hierarchical query based on the object type.

• I have photoshop and he says it's a free trial version what should I do?

  I have photoshop and he says it's a free trial version what should I do?

  Hi annas85504540

  Please follow the steps mentioned in the https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Let us know if this helps!

  Kind regards

  Aurélie hamadi

• I have photoshop and light room formula already and that you want to add illustrator to my current plan but to know how much it will cost me?

  I have photoshop and light room formula already and that you want to add illustrator to my current plan but to know how much it will cost me?

  Rebecca,

  Unfortunately, you can't get a normal subscription, no way to add it to your package.

  Added to your current price, I'm afraid that it will be close to the price of the entire subscription cloud.

  http://www.Adobe.com/downloads.html?promoid=JZEFS

• I think I should have CS6 and not CC 2015 as a trial version.  What should I do?

  I pay every month for Dreamweaver.  I have a new machine and you want to install there and by having it on my computer.  I get a trial version installed but do not want to install a trial version every 30 days.  What should I do?   I think I should have CS6 and not CC 2015.

  With a subscription to the CC, you actually have access to DWCS6, CC, CC 2014 and 2015 CC throughout the creative cloud desktop application.

  There are 2 versions of DWCS6 however, the disk version and the creative cloud. If you have installed the disk version as a test, a subscription of CC will help you leave the mode of trial and after 30 days, it will stop working (you would have needed to buy a set of disks or download of a license of DWCS6 to get right to the series for that).

  Make sure you have the version of cloud by installing it from your CC desktop application...

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  You can have all 4 versions installed at the same time if you wish, just pay attention during installation if you do not remove older versions. They will not work at the same time however.

• I currently have photoshop and I want to add Lightroom. How do I do that? It cost 9.99 MORE for Lightroom or 9.99 for BOTH?

  Currently, I have Photoshop and want to add Lightroom. How do I do that? It cost 9.99 MORE for Lightroom or is 9.99 for BOTH? :

  If you are charged $9.99 per month, you must have the package of photography. Open your creative cloud application and you should be able to install Lightroom since the Apps tab.

• EliteDesk 800 G2: SSD will allow only boot UEFI and not appear as a legacy boot option.

  Hello

  My company is the purchase of HP EliteDesk 800 G2, some comes with HARD drive and some with SSDS.

  Deploy us Windows 7 x 64 using SCCM using legacy startup.

  On a machine with installed HARD drive, I can configure the startup options to use legacy boot, but when I replaced the drive to an SSD the only option to start for this drive is UEFI.

  This causes the deployment fails because the player needs to be partitioned as TPG.

  On the other hand, if I disable the legacy, the UEFI boot PXE boot and partition the drive as GPT, after the deployment of a disk image is unable to start with error 0xc000000d (I guess that the cause is supported in Windows 7 because it does not work on Windows 8.1).

  Bottom line, I can install Windows 7 on a HP EliteDesk 800 G2 only if start legacy is enabled and I have partition the drive as UEFI.

  Is it possible to force the SSD at startup like legacy and not UEFI?

  This problem results from the workstation or is it applied by the SSD?

  Thank you.

  Hi Jay,.

  I appreciate you are trying to help.

  I guess that there are some problems of communication because it is a business problem and there are other technical components involved that I don't understand.

  After some research more, it seems that this problem occurs with a specific model of SSD.

  We'll just have to wait for HP support.

  Thank you.

• When you rename a file highlights only the name and not the name extension.

  Hi all

  When I rename a file, it highlights only the name part of the file name and not the name extension.  I need the name of entire file highlighted when I rename a file.  Where is the setting to change this?

  Thank you

  Pete

  Hi Pete,.

  Engineers also writes a blog on why they made this change, but to prevent millions of calls to support technical questions "I renamed my file and now it no longer opens.
  It might be possible to change this behavior with editing the registry, but I couldn't immediately find a reference to such a value.
  However, I have a workaround.  I usually press F2 to rename a file (I'm a lover of keyboard, hate having to use the mouse).  So I click on F2, then if I need to select both file extension, I can make one of these:
  • Press Ctrl-A
    or
  • Press SHIFT - end

  I generally use the method of shift - end because it's closer where my fingers are already on the keyboard (I'm a lover of keyboard, but I'm too lazy).  Hope this helps at least a little.

• Contains only contains one and not - how PLSQL

  Hi all

  I'm writing a plsql code I need some advice.

  How can I optimize contains only - all - contains contains not in PLSQL.

  For Ex:

  If l_string1 ContainsOnly "ABCDEFGHIJKL" (a set of values)

  If l_string2 ContainsAny ' + -/'

  If l_string3 ContainsNot "1234567890"

  Thank you

  Aman

  Hello

  If you are really determined to do not post sample data, and then publish an issue involving sample data of people who want to help you already, or readily available, such as the tables in the scott schema or HR.

  For example, consider the ename column of the table scott.emp, which has these values:

  ENAME

  ----------

  ADAMS

  ALLEN

  BLAKE

  CLARK

  FORD

  JAMES

  JONES

  KING

  MARTIN

  MILLER

  SCOTT

  SMITH

  TURNER

  WARD

  Say you're interested in finding the enames which consist exclusively of letters from the 'A' series of 'n', i.e.:

  ENAME

  ----------

  ALLEN

  BLAKE

  KING

  Here are 3 ways to do it.  (I produce these results

  ENAME NR L R

  ---------- -- -- --

  ADAMS

  ALLEN OK OK OK

  BLAKE OK OK OK

  CLARK

  FORD

  JAMES

  JONES

  OK OK OK KING

  MARTIN

  MILLER

  SCOTT

  SMITH

  TURNER

  WARD

  just to test 3-way at the same time and to ensure that they are equivalent.  You might what to use conditions in a WHERE clause, and not a CASE expression.)

  This is the query that produced the above results:

  SELECT ename

  CASE

  WHEN NOT REGEXP_LIKE (ename

  , '[^A-N]'

  )

  AND THEN 'OK '.

  END AS nr

  CASE

  WHEN LTRIM (ename

  , "ABCDEFGHIJKLMN".

  ) IS NULL

  AND THEN 'OK '.

  END as l

  CASE

  WHEN REGEXP_LIKE (ename

  , '^[A-N]+$'

  )

  AND THEN 'OK '.

  END AS r

  FROM scott.emp

  ORDER BY ename

  ;

  In reply #5, you have shown that you already know how to find what lines that contain all the letters

  OTHER THAN « A » ' n '.  To find the containing enames

  ONLY ' ' 'N', you can simply use the NOT operator.  In other words, an ename contains ONLY A - N if (and only if) it does not any letter ANOTHER THAT A - N.  This is the approach used in the column above nr.  However, I think that the other ways (column l and r) are better; l is more effective.