Satellite Pro L50 - A - "Check Fail Media, no boot device"

Similar Questions

• Satellite Pro L50 - load capacity of low battery

  Satellite Pro L50, I got a warning box will appear from the Toshiba PC Health Monitor, who said

  "Your battery charge ability is relatively poor.
  After a period of time, the battery will lose its ability to perform in the max capacity & will need to be replaced. This is normal for the batteries. Click the help button for more information on the State of charge 'poor'. »

  By clicking on the help button, said the State of the battery to a third load capacity.

  Is this an indication that I need a new battery?
  The laptop is only 4 months old & I have a few concerns. Comments appreciated

  Best regards, mrpringle.

  If the laptop is 4 months old I recommend you to contact your dealer or directly the closest Toshiba sevice provider and explain the situation.

  You should clarify this with them and maybe you will get new battery free.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
  Don't wait. Call the Toshiba service as soon as possible.

• USB 3.0 does not work on my Satellite Pro L50

  Hello boffins.

  I have a problem with the driver for the Intel USB 3.0 eXtensible host controller on my L50 (running Win7 64 bit).

  I recently took my L50 Pro Satelite (PSKK3A-001001) to the repair shop because the blue ports were not running at speeds of USB 3.0 when I plugged a USB 3.0 compatible device (a WD 1 TB HARD drive). When I looked in the device tab "Display connection" Manager, HARD drive showed as connected to the ordinary C220 USB hub which is for USB.2.0. USB 3.0 eXtensible Host Controller has been inactive.

  The technician in the repair shop said:

  + I tested your machine with a new installation of Windows 8 and have been able to achieve speeds to 180 MB/s of my FlashDrive USB 3.0 without problem, which indicates that it is a matter of faulty software. We can improve your Windows 8 machine free of charge if you prefer, but I'm unable to solve the problem in Windows 7. From what I can tell, and what you have experienced, no published 3.0 for Windows 7 USB drivers can recognize the 3 USB ports installed as a USB 3 connection. If you are wanting to stick with Windows 7, I can't guarantee that you will reach speeds of USB 3.0 by using these ports. +

  It's not really good enough, Toshiba. Now, I bought this machine specifically with pre-installed Win7 (because Win8 is rubbish) that I wanted a machine Win7, including USB 3.0 ports. This machine has been published as such, having Win7 installed with 2 x USB 3.0 ports and 1 x USB 2.0. This is confirmed by the page of the specifications of Toshiba here: [http://www.mytoshiba.co.nz/support/computers/satellite/pro/l50/pskk3a-001001/specifications].

  So, my question is this: why this machine is the drivers needed to run it as advertised (i.e. under Win7 with 2 ports USB 3.0 x and 1 x USB 2.0) and if there are drivers for this device available, where are they? I tried and tried the repairman (I guess) but I'm still without a driver to run my USB 3.0 clocked ports. I tried age for the files to be transferred between pending devices.

  Maybe someone can help me find a driver that works or Toshiba will clean up their act and produce a.

  But you have installed Intel USB3.0 driver 2.0.0.102 version, right?

• Satellite Pro L50 - B - unable to connect at 5 GHz Wi - Fi

  Hello

  I just bought a new Satellite Pro L50 - B and it is unable to connect to the wifi of my company 5 GHz network. It connects well to the 2.4 GHz network, but poor performance on network thaat there.

  Is it possible to get the L50 - B to work in the 5 GHz range?

  Thank you

  Martin

  Frequency of 5 GHz is supported by 802.11 A and 802.11 N
  But if the WLan module is not compatible 802.11 A, then the standard 802.11 N will operate at 2.4 Ghz

  The question is: what are the standards WLan are supported by the integrated WLan module?

  Which module WLan is integrated?

• Satellite Pro A200: Recovery using a ghost network boot disk

  Hi all

  Need to ghost several satellite pro a200 machines using a ghost network boot disk. When I use disk ghost provided by the ghost boot Wizard and no boot on PC back I get the message 'No Fast Ethernet PCI Adapter Found!' Serious internal error! (hardware works fine under XP/Vista)

  I tried to boot from CD, Mem Stick and USB floppy with the drivers of toshiba and realtek without success, research on google seem to point to there needing to be a driver to interface with the cardbus / PCMCIA adapter - if it IS the case can anyone shed light on the fate of a pilot and how I could continue on this?

  Thank you very much
  GAV Shakespeare.

  Thanks for the clarification best regards

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• Satellite Pro L50 - A does not illuminate

  Hello

  I took a few steps on this forum but no luck so far...

  My L50 - A Satellite Pro was working fine up until yesterday, but today, only it just won't turn on. A small orange led light appears when I connect to the power cable...

  That's what I've done so far-

  1 power cable removed
  2. using a needle, pressed force shutdown (stop) at the bottom for 10-12 seconds
  3. then I pressed the start/power button on the front for 60 to 70 seconds
  4. I have connected the feeder and then to new press button start / stop at the front for 60 to 70 seconds

  Yet the laptop does not start!

  any suggestions?

  Thank you

  Hmmmmmm... It is not easy to say what the problem is here.
  Have you used your computer laptop usual ot, you might update something?
  In general, there are steps that you did which could be responsible for your problem?

• Satellite Pro L50-B05D - need driver for Windows 7 WLan

  Hello

  I bought a * Toshiba Satellite Pro model L50-B05D psktaa - 001 05d *.
  I needed a new machine because I was starting a new job the next day.

  During an installation out of office 2013 the machine in one of its discounts to zero was a catastrophic error... and has refused any attempt of recovery. around 7:00 in the night...

  I needed an operational machine for work... the next day

  I took out my Windows 7 and proceeded to reconfigure the computer and install Windows 7... Machine is operational, BUT I can't get the Wireless LAN works... for the model I there doesn't seem to be a wireless lan driver...

  The functions of network card BUT not wireless LAN...

  Please can someone tell what is the right driver LAN wireless to the machine...

  Thank you

  Harpoon2222

  Hello

  Your laptop satellite L50-B05D belongs to the PSKTAA series and this series was only released in Australia.

  But the similar series of portable Satellite L50 - B PSKTAE is released in Europe.
  The drivers of the EU Toshiba driver page should be compatible.

  Visit this page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose here.
  Laptop
  Satellite
  Satellite L
  L50 - B satellite
  PSKTAE
  Win 7 64 bit

  Note: there are three different Wlan drivers: Intel, Broadcom, Atheros

• Satellite Pro C870 - Internet connection fails after a fashion 'sleep'

  SATELLITE PRO C870-19N. Internet through an ethernet cable. Windows 8.1

  Hello

  My problem:
  I turn on the computer. It recognizes the connection internet (Ethernet cable). I work without any problem... and I left (a few minutes)... I come back. Black screen, computer sleeps. I wake it up - I have to enter my password - and he says there is no internet connection... I have to stop it and restart it.

  Can you help me?

  Thank you.

  This problem occurs using only the LAN connection or have you noticed the same situation using Wireless LAN?

  In case this happens only by using the LAN connection, I recommend you to check if you can update the LAN driver.

  You can also right click on the network icon (in the taskbar) and could choose to diagnose and repair.

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• Satellite Pro L50 - A - does not function keys

  Hello

  I just bought the L50, but the function button did not work. I tried to reboot, reinstall the utilities, but it did not help.

  I couldn't find the "restart flash card" also. Can anyone help?

  Thank you!

  > I just bought the L50, but the function button didn't work

  What system do you use or what system was preinstalled on this laptop?
  As far as I know a few L50 - A Satellite Pro have been pre-installed with Win 7 and Win 8 DVD could be found in the package

  The fact is that Win 7 and Win 8 are two different systems and different Toshiba tools are needed to get the FN button work.

  Your comments would be appreciated.

• Satellite Pro C850-15 q - failed to connect to projector

  Hello world

  I'm unable to connect a Toshiba Satellite Pro C850-15 q Part No.: PSKC9E-01JOOHEN to a projector, laptop computer does not wish to duplicate the screen for the projector.

  The laptop worked without any problem with a spotlight for months, but its only today that it is unable to connect to a projector via a VGA cable.

  So far, I have tried to use the laptop on different different projectors, but will not work on any.
  I have used different VGA cables, uninstalled the driver display and then reinstalled the latest driver, updated chipset and bios but nothing seems to work.

  Physically, the VGA port seems fine, I tried to project using FN + F4 and the windows key + P, the two options do not work. I have also a right-click on the desktop, properties, all the eyes of correct parameters, also sought to graphics options right click again this sounds all very well.

  The laptop is running windows 7 32 bit.

  Suggestions as to what to try next?

  Thank you
  Darren.

  Hello

  What exactly happens when you press Fn + F4 (or only F4)?
  Other function keys work correctly?

  The laptop seems to also support the exit HDMI port.
  Are you able to connect the laptop to an external monitor and the output video using the F4 function key?

• Satellite Pro A200: RIS installation fails - BSOD

  Hello

  Someone has already tried to use RIS for laptops Satellite Pro A200 ETA-1 image. I'm getting a BSOD which I think is due to a bad driver (downloaded from the Toshiba site).

  Also, can someone tell me where I can find a telephone number for technical support (UK), they seem reluctant to make available on their web site.

  Concerning
  Paul

  Hello

  satellite Pro A200 has the controller Intel AHCI-build. It is not included in Windows XP. You will get a bluescreen 0x0000007B proving that XP cannot identify the controller and has no driver for it.
  Here is a brief description of how add that driver to your RIS installation:

  1 copy all the single files from the Storage Manager Intel ICH - 8 M 32 - Bit floppy in your directory$ $oem $ \Textmode.
  If this directory exists you must change your txtsetup.oem file and add/extract the AHCI driver of the file txtsetup.oem of the F6 floppy in it (do not overwrite the txtsetup.oem file in this case!).
  If this directory does not exist, you can use the supplied txtsetup.oem file numodified.
  Download the floppy F6 Storage Manager here: http://support.toshiba-tro.de/tedd-files2/0/stormng-20070827133046.zip

  2. change your Winnt.sif file (or what you named your answer file) and add or change the following sections:

  [MassStorageDrivers]
  "Intel(r) 82801HEM/HBM SATA AHCI Controller (Mobile ICH8M-E/M)" = oem

  [OEMBootFiles]
  iaAhci.cat
  iaAhci.inf
  iastor.cat
  iastor.inf
  iastor.sys
  License.txt
  Readme.txt
  Txtsetup.OEM

  If you have any questions do not hesitate!

• Satellite Pro M70 - WLAN adapter is not listed in Device Manager

  Hello!

  I just formatted my drive and reinstalled Windows xp and now I can't turn on the wifi. The light is on and the switch is on but it does not work.

  I downloaded all wlan drivers but nothing has worked. In the Device Manager I also can't find any WLAN card. In device manager there is an icon * devices * with a qustion-mark and he said * network control *.
  This is the WLAN card.

  Until I reinstalled Windows it worked fine so the problem is not mechanical.

  Help, please. my laptop satellite pro m70, don't model no psm76e/00e005g3

  Hello

  If the normal LAN card is already recognized correctly need wireless network card, then you should try to install the WIRELESS driver from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, the local network card device can be activated with the hardware switch on the computer laptop and FN + F8.
  Check it!

  Good bye

• Satellite Pro A30 - C - 11 G - SAFE UEFI boot

  Hello together ,.

  as a first step, I am from Germany and my English is not so well ;(

  I'm sitting here with a SATELLITE PRO A30 - C - 11 G and try to start WITHOUT UEFI...
  I need to install Windows 7 with MBR, because of software encryption support only the MBR
  I tried the hole day starting inherited foce, but without success.

  The BIOS is up to date (v. 1.50)
  I have disabled the guard SW, I changed the start Mode ' boot UEFI (Legacy))... but nothing has worked. "

  Could someone help me?

  Best regards

  Jan

  If missing the boot MSC Mode, install the latest BIOS to activate the CSM support.