I removed a second TV tuner. WMC now reports "tuner not found" when he starts recording. Boring. Is there a solution?

Similar Questions

• Tuner not found on the Qosmio F20-149

  Hello world

  I have a Qosmio F20-149. After the transfer of my place of residence in another city in the same country) I suddenly see that my media reports "tuner not found" when I try to access the TV. Also, when I try to configure the internet connection, I get an error message of the MC asked me to restart the computer or contact technical support. Can someone help me with this?

  thanking you in anticipation.
  Best wishes.

  Hello

  I'm not an expert but tuner not found message cannot occur without any reason. There seems to be some hardware related issue and has nothing to do with your home.

  If you are 100% sure that everything was ok a few days ago, I recommend you to roll back OS to an earlier time using System Restore tool. Please also check status of TV tuner in Device Manager? Is this all is well?

• Error: "Tuner not found" with Windows Media Center

  Original title: someone at - there a solution to this problem of Tuner not found with Windows Media Center? I tried for several years to find an answer to this embarrassing problem without success.

  I did just about everything, including a restoration of the complete system without success. It would be nice to be able to use my Windows Media Center to watch live TV and record programs I would like to see later.

  There is a great thread to
  http://h30434.www3.HP.com/T5/desktop-hardware/ViXS-pure-TV-U-48A3-TV-tuner/TD-p/52529
   
  with people have reported this problem with this tuner.
   
  Unfortunately, it looks like the only solution people have found is to replace the
  Tuner with another brand.
   
  I don't know if it's the hardware failure or something else, but looking at this
  wire, if it was ME, I cut my losses and replace the tuner.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• in windows media center live tv set up the problem. it pop ups tuner not found.

  TV a hinged ir extension decoder but why I couldn't jooin a network m.?

  This is how the set up works. These article are a good read through:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01187871

  http://Windows.Microsoft.com/en-CA/Windows/adding-TV-tuners-Media-Center#1TC=Windows-7

  Here, the discussion might help your cause-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-no-tuner-error/6154dcb0-787e-48CA-BC8D-d159e1dad6e3

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-tuner-not-found-with-Windows-Media-Center/c9c72430-c6be-4955-8093-9a52ed54d505

• TV tuner initialization failed"when I start my computer

  Original title: TV tuner

  When I start, I get a message saying "failed to initialize of tunder TV."  Because of the digitization of television, I now have a TNT PCI but this message still appears.  Any suggestions please?

  Hello

  Have you made changes on the computer before this problem?

  Try the following and see if it helps.

  Method 1:

  Update the latest drivers on the manufacturer's Web site and check.

  Method 2:

  Uninstall the software from TV tuner card and check.

  How to change or remove a program in Windows XP: http://support.microsoft.com/kb/307895

• TUNER NOT FOUND

  So I have one installed (supplied with the system) card TV Tuner and it has worked well for over a year and then suddenly stopped working in Windows Media Center. I don't use this feature often and decided to exercise patience, a fix would certainly come from Ms.

  That never happened.

  When I try and use Media Center TV Setup protocols, he fouls a message "NO TUNER FOUND" well, it really is. Occupies a slot and is connected to a cable modem. Something has changed. Can someone give me a simple answer please? Windows 7, 64 bit, Avermedia Tuner on a bridge.

  Worked and suddenly stopped. I allowed Windows automatic update of my windows. Well Yes. When updates are available, they download and apply.

  Perhaps a parameter has been changed that hit my tuner off grid?

  I ran Diagnostics, troubleshooting, they can't find anything wrong with my Tuner. (latest drivers etc..) They "found". BUT no, apparently of WMC. What has hurt turned, I suspect that it is with WMC.

  Thank you

  I've chopped it and discovered the culprit.  It is the tuner Media Center is concerned. You see, even my tuner works with other third party software. Unfortunately, when I bought my TV Tuner card, it was a 2010 model is more consistent with the comms shaped FCC NEWS about implementing digital new blah blah blah.  Point is Media Center has been improved in the procedure of automatic download of windows and now IT does not work with the 'old' Tuner. (why the Tuner was so cheap. Just as some people had to buy a new TV when we went to the.)

  So, you will need to buy a compatible TV Tuner card of 2012 or later. Simple. Costly. Simple. Planned obsolescence. I bought one, and everything is great!

• Qosmio G50 - TV Tuner "not found service.

  I recently bought a model Qosmio G50-420 2 days ago and I tried repeatedly to get the TV up and running, but every time WMC scans for services, there are not found.

  I've updated the drivers from the Toshiba site and I even tried to use MediaPortal but this program is not all 'channels' either... and theres a "indicator signal strength' when trying to put in place channels and it displays nothing with all my devices (tv, fm tuner tuner, etc.).

  I don't live in a rural area... How do I get all services?

  I am running Vista Ultimate 64-bit btw.

  Hello

  Qosmio G50-420 is not known to me are you sure it of a G50-420?
  Check that the labels at the bottom of the unit there are few issues of model.

  As far as I know that some Qosmio G50 models are equipped with the TV tuner, but this isn't the case with all the G50.
  You should check if your G50 has been equipped with TV tuner.

  In addition, it would be very interesting to know how connect you the G50 in order to watch TV on the laptop?
  A connect to a set-top box?

  Please see the manual (page 155) for more details.
  There are a few images and add information that might be useful!

  See you soon

• TV Tuner not found

  I have Windows Vista and all the drivers and service packs are up-to-date. I had UNPLUGGED the TV input and left only the antenna. After awhile, I had disconnected times (antenna and TV out). Recently, I tried to connect the antenna. I am able to set up the TV. However, after completing the click button, nothing comes on the screen except for the message "NOT FOUND in TV TUNER). I check various forums but found no answer so far. Rebooted, disabled and enabled material... nothing works! It shows the material and records are up-to-date. Can someone please? Thank you!!

  I have Windows Vista and all the drivers and service packs are up-to-date. I had UNPLUGGED the TV input and left only the antenna. After awhile, I had disconnected times (antenna and TV out). Recently, I tried to connect the antenna. I am able to set up the TV. However, after completing the click button, nothing comes on the screen except for the message "NOT FOUND in TV TUNER). I check various forums but found no answer so far. Rebooted, disabled and enabled material... nothing works! It shows the material and records are up-to-date. Can someone please? Thank you!!

  If 'he' is Windows - they are not your TV Tuner or that they support.  Go to the manufacturer of the device and see to manually get drivers and the latest software and the troubleshooting steps that THEY suggest.

  (* attention *-they could suggest a new installation.)

• I'm unable to watch videos on a certain type of site. They all now say, 'file not found '. They worked until I added a router for my Kindle Fire.

  I used to be able to watch videos on a certain type of site now all say file not found windows vista. I recently added a router for a kindle fire

  original title: streaming videos

  Hello

  ·          Do you mean that you use Internet Explorer 6 in Windows Vista?

  Windows Vista Internet Explorer 7 default features.

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

• I removed a secondary hard drive but now Vista will not boot. I tried startup repair, but failed. What alternatives are there?

  It is a desktop computer that I built myself, so I have no tech support. Until I removed the hard drive, I formatted to remove all data. Since then, Vista does not start. I used my installation disc to repair Vista, but that has failed. I tried the system restore, which was a success, but Vista still does not start. What else can I do to solve this problem.

  Hello itisallgeektome,

  Open Control Panel and click on Administrative Tools. In the Administrative Tools window, click computer management, and then in the next window, click on disk management. When the disk management window opens look down the list of partitions and see if you have a "system reserved" partition This is where the system files are stored.

  If you have installed the drive 'after' that you installed vista, then I accept the boot files would not be on the second drive, but it seems strange that the windows repair option will not correct the bootloader. However, by doing an inplace upgrade this will re - install windows vista (but it will not, or should not affect your files/programs (However it might be useful to back up all the important files that you cannot just in case beed)). As a complete reinstallation is completed, it will create a new bootloader in the process.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• P750 satellite - TV tuner not found

  I have a satalite with tv tuner p750.
  I turned on windows media Center to set up the TV station.
  Message WMC / can't find a tv tuner.
  Looked into without a tv tuner device manager.

  Found the driver on the web site of toshiba, but when I installed, windows told me it did not installed correctly.
  What should I do now?

  > Looked into without a tv tuner device manager.
  Are you sure that the laptop supports TV tuner?
  What Sat Pro P750-xxx you have exactly

• I have to log on to a web site under 2 different companies, but I clicked on 'remember login' for one and now I can not simply to the start page to open a session to the other company - he continues to go to the page for the first.

  I have two companies for which I connect to an Internet site for the data. I clicked "remember me" for the first company and now I can't get to the home page to open a session for the 2nd, he just guard logging in for the first.

  You can also try one of these:
  CookiePie: http://www.nektra.com/oss/firefox/extensions/cookiepie/
  CookieSwap: https://addons.mozilla.org/firefox/addon/3255
  Multifox: http://br.mozdev.org/multifox/

• Why cant I get the 8ball pool game to open played 8ball pool now says page not found

  original title: whycantiget8ballpoolgametoopen

  beenplaying8ballpoolnowamtoldpagenotfound

  Does take you to hit the space bar?
  (* smile *)

  Web pages are supported by their creators and those who welcoming them.

• When I try to add music to the video that I created on Windows Media Player, it says file not found... It is clearly there... I downloaded it from i tunes... advice?

  I am trying to add music to video, that I created on Windows Media Player... When I select the song in my Itunes list it says file not found.  Don't know why he is here... somewhere!  Any tips?

  Because Windows Media Player cannot create videos I have
  assume that you are talking about Windows Movie Maker.

  Try to browse to your music folder and see if you can
  Add a music file to your project. If you have problems
  You may need to convert the music file to the. WMA
  format before importing.

• Error messages: "an unknown error has occurred" and "message is not found" when you try to remove and open your messages.

  Original title: having touble delete messages in Windows Mail

  In Windows Mail, I have a problem deleting messages, a note comes up saying "an unknown error has occurred." Messages can be opened with the message "message was not found. I am running Vista with the 32-bit version, so I ran the 32-bit update and received the message that 'update doews not apply to your system. I also ran the 64-bit update but got the same message. Anyone able to help me?

  This is usually due to a mismatch between what is in the message store and what is in the database and is usually caused by invading antivirus software (see www.oehelp.com/OETips.aspx#3).  Try to compact and repair the database and see if that fixes the problem (see www.oehelp.com/WMUtil/).

  Steve