TUNER NOT FOUND

Similar Questions

• Tuner not found on the Qosmio F20-149

  Hello world

  I have a Qosmio F20-149. After the transfer of my place of residence in another city in the same country) I suddenly see that my media reports "tuner not found" when I try to access the TV. Also, when I try to configure the internet connection, I get an error message of the MC asked me to restart the computer or contact technical support. Can someone help me with this?

  thanking you in anticipation.
  Best wishes.

  Hello

  I'm not an expert but tuner not found message cannot occur without any reason. There seems to be some hardware related issue and has nothing to do with your home.

  If you are 100% sure that everything was ok a few days ago, I recommend you to roll back OS to an earlier time using System Restore tool. Please also check status of TV tuner in Device Manager? Is this all is well?

• Error: "Tuner not found" with Windows Media Center

  Original title: someone at - there a solution to this problem of Tuner not found with Windows Media Center? I tried for several years to find an answer to this embarrassing problem without success.

  I did just about everything, including a restoration of the complete system without success. It would be nice to be able to use my Windows Media Center to watch live TV and record programs I would like to see later.

  There is a great thread to
  http://h30434.www3.HP.com/T5/desktop-hardware/ViXS-pure-TV-U-48A3-TV-tuner/TD-p/52529
   
  with people have reported this problem with this tuner.
   
  Unfortunately, it looks like the only solution people have found is to replace the
  Tuner with another brand.
   
  I don't know if it's the hardware failure or something else, but looking at this
  wire, if it was ME, I cut my losses and replace the tuner.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• in windows media center live tv set up the problem. it pop ups tuner not found.

  TV a hinged ir extension decoder but why I couldn't jooin a network m.?

  This is how the set up works. These article are a good read through:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01187871

  http://Windows.Microsoft.com/en-CA/Windows/adding-TV-tuners-Media-Center#1TC=Windows-7

  Here, the discussion might help your cause-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-no-tuner-error/6154dcb0-787e-48CA-BC8D-d159e1dad6e3

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-tuner-not-found-with-Windows-Media-Center/c9c72430-c6be-4955-8093-9a52ed54d505

• I removed a second TV tuner. WMC now reports "tuner not found" when he starts recording. Boring. Is there a solution?

  I'm thinking there must be a registry fix just for this.

  I used to have two sticks of tuner TV USB in my PC (Win7 Home 64 bit), but one of them went belly.

  Now when WMC starts a scheduled recording, I have a pop-up balloon reports "Tuner not found". But the TV very well played and recorded normally.

  Is there a simple solution for this? Very annoying. THX.

  In WMC, go to Settings/tasks/TV Signal and set up your TV Signal again.

  WMC has been implemented with 2 tuners and will continue to be a tuner missing until you set up again.

  If you replace the missing tuner, or replace it with another tuner, you need to configure WMC again.

• Qosmio G50 - TV Tuner "not found service.

  I recently bought a model Qosmio G50-420 2 days ago and I tried repeatedly to get the TV up and running, but every time WMC scans for services, there are not found.

  I've updated the drivers from the Toshiba site and I even tried to use MediaPortal but this program is not all 'channels' either... and theres a "indicator signal strength' when trying to put in place channels and it displays nothing with all my devices (tv, fm tuner tuner, etc.).

  I don't live in a rural area... How do I get all services?

  I am running Vista Ultimate 64-bit btw.

  Hello

  Qosmio G50-420 is not known to me are you sure it of a G50-420?
  Check that the labels at the bottom of the unit there are few issues of model.

  As far as I know that some Qosmio G50 models are equipped with the TV tuner, but this isn't the case with all the G50.
  You should check if your G50 has been equipped with TV tuner.

  In addition, it would be very interesting to know how connect you the G50 in order to watch TV on the laptop?
  A connect to a set-top box?

  Please see the manual (page 155) for more details.
  There are a few images and add information that might be useful!

  See you soon

• TV Tuner not found

  I have Windows Vista and all the drivers and service packs are up-to-date. I had UNPLUGGED the TV input and left only the antenna. After awhile, I had disconnected times (antenna and TV out). Recently, I tried to connect the antenna. I am able to set up the TV. However, after completing the click button, nothing comes on the screen except for the message "NOT FOUND in TV TUNER). I check various forums but found no answer so far. Rebooted, disabled and enabled material... nothing works! It shows the material and records are up-to-date. Can someone please? Thank you!!

  I have Windows Vista and all the drivers and service packs are up-to-date. I had UNPLUGGED the TV input and left only the antenna. After awhile, I had disconnected times (antenna and TV out). Recently, I tried to connect the antenna. I am able to set up the TV. However, after completing the click button, nothing comes on the screen except for the message "NOT FOUND in TV TUNER). I check various forums but found no answer so far. Rebooted, disabled and enabled material... nothing works! It shows the material and records are up-to-date. Can someone please? Thank you!!

  If 'he' is Windows - they are not your TV Tuner or that they support.  Go to the manufacturer of the device and see to manually get drivers and the latest software and the troubleshooting steps that THEY suggest.

  (* attention *-they could suggest a new installation.)

• P750 satellite - TV tuner not found

  I have a satalite with tv tuner p750.
  I turned on windows media Center to set up the TV station.
  Message WMC / can't find a tv tuner.
  Looked into without a tv tuner device manager.

  Found the driver on the web site of toshiba, but when I installed, windows told me it did not installed correctly.
  What should I do now?

  > Looked into without a tv tuner device manager.
  Are you sure that the laptop supports TV tuner?
  What Sat Pro P750-xxx you have exactly

• Windows Media Center TV tuner not detected

  My current operating system is Windows Vista Home Premium Service Pack 2
  (I installed SP2 from microsoft.com)
  I have the Version of the Windows Media Center - Windows Vista 6.0.6002.18030 software (vistasp2_gdr.090429 - 2357).  I'm trying to watch TV on my laptop.  I have Windows Media Center and am confused about the version because I saw this - if the version number is 6.0.6001.18000, you are NOT running Windows Media Center TV Pack.  You are running the version of Windows Media Center, which is included in Windows Vista or in Windows Vista SP1.
   
  As you can see my version (numbers) are alittle different on the end, also the info in parentheses (vistasp2_gdr.090429 - 2357) I don't know what that means.  When I tried to configure the tv signal in Windows Media Center, I was told: the TV signal cannot be configured because no tv tuner hardware was detected. So, how can I find out if there is an internal tv tuner installed and everything is not detected?  My laptop is new - 3 weeks, and I think that all the drivers are current.   While they inspected the help windows vista hardware compatibility list for 64-bit vista tv tuners, I was flooded for more information that I knew what to do with.  I'm obviously not a computer genius and will never be.  I'm open to suggestions.  I just need to know what I have to do to be able to watch TV on my laptop.  Any help will be appreciated! Thank you.

  Hello

  Thanks for choosing Windows Vista Forums.

  I recommend you contact the manufacturer of your computer to check for the presence of a TV tuner.

  All Vista computers are delivered with the same version of Windows Media Center.

  Here is a link below for compatibility with Windows Vista Hardware.  Please let us know status.

  http://windowshelp.Microsoft.com/Windows/en-us/help/d7ef383d-3342-4C8B-b1ce-5ca64891bc381033.mspx

  How to use Windows Media Center on a Windows Vista-based computer to watch, pause and record live TV

  http://support.Microsoft.com/kb/942375

  Solve problems with watching TV on your computer

  http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx

  Please have a read of the article below:

  Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

  http://support.Microsoft.com/kb/934531

  Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

  http://support.Microsoft.com/kb/929453

  If you experience problems with your TV tuner card, I suggest you go to the Web site of the manufacturer for the software updates and technical support.
  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PCI TV tuner not recognized in Windows 7

  Original title: recognition of Harware problem

  I tried to install a PCI TV tuner in WIn 7, but the computer does not recognize it. I tried it on another computer running Win 7 and it is recognized it. Any ideas?

  Hi Sockmonster,

  1. no TV tuner appears in the Manager of devices under sound, video controllers?

  2. is your updated TV tuner card?

  Step 1: Look for errors in Device Manager

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  (b) in Device Manager, look for the device and then double-click the device name.

  (c) under the general tab, find the status of the device for any error code indicated.

  Check out the link:

  Get help with (valid also for Windows 7) Device Manager errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

  You can visit the following links and check if it helps:

  Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

  http://support.Microsoft.com/kb/934531

  Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

  http://support.Microsoft.com/kb/929453

  You can also check out the following link and try the suggestions provided by cheque and eRwIn jOnEs Tuesday, February 23, 2010 05:11 if it helps:

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/6154dcb0-787e-48CA-BC8D-d159e1dad6e3

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A660/P07: Tuner TV - some channels not found

  Hello

  I need help please tv tuner. -"No channels were found.

  Buy Toshiba A660/P07 laptop with TV tuner on the weekend.
  Running Windows 7 64 bit OS sound Toshiba installation set-up fees.
  Connected online and installed all Windows updates.

  However cannot get any TV signal on the laptop.

  When you use Win7 Media Center - after after installation
  [http://www.mytoshiba.com.au/support/item/226]
  The result is "* some channels not found *.»

  1 - is anyone know how to get the functioning of the tuner? am I missing something basic?
  2. what someone has an A660/P07 and I can confirm that the tv tuner works in Windows 7 Media Center?

  Thanks in advance,
  Oleg.

  _Here's what I've tried: _

  1 tested antenna/cable. The antenna works very well with a normal digital Panasonic TV and an old Analog Tv.

  2 followed FAQ How to install tuner in the press room
  http://www.MyToshiba.com.au/support/item/226
  -Region: Austrlia
  -J' tried to digital, analog signal.
  -Tried to add manually analog and digital channels

  3. I tried the turn off/on tv tuner driver.
  4. tried to uninstall/reinstall the tv tuner driver.
  5 tuner driver Tv is the last updatev2.3.3.31 that no newer version exists of Toshiba or Microsoft.
  6 installed latest BIOS update v1.60
  7. tried with other MediaPortal TV tuner software. result: no signal of any channel
  8 tried all above on the two versions of 32-bit and 64-bit Win7, still no tv signal.
  9. I'm back for Win7 64 bit fresh install with no tv signal

  Its possible that your antenna is not compatible digital. Are you able to try another antenna?

  If its does not work with a good known antenna that can capture digital channels, the antenna socket itself may have a problem.
  You will need to send it to an ASP for repair.

• When I try to add music to the video that I created on Windows Media Player, it says file not found... It is clearly there... I downloaded it from i tunes... advice?

  I am trying to add music to video, that I created on Windows Media Player... When I select the song in my Itunes list it says file not found.  Don't know why he is here... somewhere!  Any tips?

  Because Windows Media Player cannot create videos I have
  assume that you are talking about Windows Movie Maker.

  Try to browse to your music folder and see if you can
  Add a music file to your project. If you have problems
  You may need to convert the music file to the. WMA
  format before importing.

• Not found driver software CD.

  I'm unable to copy or burn CDs more. My I Tunes tells me not found driver CD. What should I do?

  See Microsoft Knowledge base article.
  http://support.Microsoft.com/kb/270008/en-us

  First remove the CD/DVD drive device manager.
  Then, completely remove the Upperfilters and Lowerfilters from the following registry key values:

  * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318} *.

  And finally to restart the device.

  After the laptop has been restarted again, you can check the ODD feature.

• Unable to launch programs error: could not open rtl120.bpl file is not found, try to reinstall the program

  Original title: difficulties to open programs

  I keep trying to open different programs but get a message that says "could not open rtl120.bpl file is not found, try reinstalling the program.»  My problem is that some of these programs came with my package on the computer and if I uninstall it then I have to pay to re install a new program.  How can I solve this problem?

  Hi JenniferAS,

  1. is the issue limited with a particular program?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  It is a file associated with a program called Tune Up Utilities 2010.

  Tune up Utilities is a suite of utility software for Microsoft Windows designed to help manage, maintain, optimize, configure and troubleshoot a computer system.

  Method 1: Uninstall and reinstall Tune - Up Utilities 2010 and see if that helps.

  Step 1: Uninstall tune-up Utilities 2010.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Step 2: Re-install tune-up Utilities 2010.

  Download tune-up from here:

  http://download.tune-up.com/TUU2010/TU2010TrialEN-GB.exe

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• Error - C:\Documents and Settings Settings\ Application Data\Apple\Apple software Update\Bonjour.msi' is not found.

  can not be found the MSI, i don't Tunes not served

  Hi lkkin,

  1. when exactly do you get this error message?

  2. you are trying to install itunes?

  If you are facing problems with the installation of iTunes, you can try the following steps and check.

  You can manually uninstall completely from all of your machine's iTunes software. Then, try to download & reinstall iTunes.

  a. close iTunes and iPod Updater Utility if a program is running. Press on the ""Ctrl, ""Alt"and" delete"key secret to bring up the Windows XP Task Manager" "

  b. click on the tab labeled "process of.» Look for the process entry named "iPodService.exe". Click the entry, and select "end process" to close the program.

  c. access to the Start menu and choose "Control Panel". Click on the link "Add / Remove Programs.

  d. scroll down the list of programs currently installed on your hard drive. Click on the ""iTunes ' entry and then click on the 'Remove button. "" Click 'Yes' when prompted to confirm the decision.

  e. click 'No.' If a window appears asking to restart Windows XP. Look for the entry 'iPod Updater' in the list of programs.

  f. click on the entry and then follow the same procedure to remove the program. Restart the machine.

  You can also read the following article and check.

  Problem installing iTunes or QuickTime for Windows