Qosmio G50 - TV Tuner "not found service.

Similar Questions

• Tuner not found on the Qosmio F20-149

  Hello world

  I have a Qosmio F20-149. After the transfer of my place of residence in another city in the same country) I suddenly see that my media reports "tuner not found" when I try to access the TV. Also, when I try to configure the internet connection, I get an error message of the MC asked me to restart the computer or contact technical support. Can someone help me with this?

  thanking you in anticipation.
  Best wishes.

  Hello

  I'm not an expert but tuner not found message cannot occur without any reason. There seems to be some hardware related issue and has nothing to do with your home.

  If you are 100% sure that everything was ok a few days ago, I recommend you to roll back OS to an earlier time using System Restore tool. Please also check status of TV tuner in Device Manager? Is this all is well?

• Error: "Tuner not found" with Windows Media Center

  Original title: someone at - there a solution to this problem of Tuner not found with Windows Media Center? I tried for several years to find an answer to this embarrassing problem without success.

  I did just about everything, including a restoration of the complete system without success. It would be nice to be able to use my Windows Media Center to watch live TV and record programs I would like to see later.

  There is a great thread to
  http://h30434.www3.HP.com/T5/desktop-hardware/ViXS-pure-TV-U-48A3-TV-tuner/TD-p/52529
   
  with people have reported this problem with this tuner.
   
  Unfortunately, it looks like the only solution people have found is to replace the
  Tuner with another brand.
   
  I don't know if it's the hardware failure or something else, but looking at this
  wire, if it was ME, I cut my losses and replace the tuner.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• in windows media center live tv set up the problem. it pop ups tuner not found.

  TV a hinged ir extension decoder but why I couldn't jooin a network m.?

  This is how the set up works. These article are a good read through:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01187871

  http://Windows.Microsoft.com/en-CA/Windows/adding-TV-tuners-Media-Center#1TC=Windows-7

  Here, the discussion might help your cause-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-no-tuner-error/6154dcb0-787e-48CA-BC8D-d159e1dad6e3

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-tuner-not-found-with-Windows-Media-Center/c9c72430-c6be-4955-8093-9a52ed54d505

• I removed a second TV tuner. WMC now reports "tuner not found" when he starts recording. Boring. Is there a solution?

  I'm thinking there must be a registry fix just for this.

  I used to have two sticks of tuner TV USB in my PC (Win7 Home 64 bit), but one of them went belly.

  Now when WMC starts a scheduled recording, I have a pop-up balloon reports "Tuner not found". But the TV very well played and recorded normally.

  Is there a simple solution for this? Very annoying. THX.

  In WMC, go to Settings/tasks/TV Signal and set up your TV Signal again.

  WMC has been implemented with 2 tuners and will continue to be a tuner missing until you set up again.

  If you replace the missing tuner, or replace it with another tuner, you need to configure WMC again.

• Qosmio G50 - no TV channels found on Windows 7

  I have the same problem, since Windows 7 Ultimate (32 bit) upgrade pre installed Vista Ultimate (32 bit) on my Qosmio G50. Some channels are there now, where there was not a problem before. Remote control not working anymore.

  Otherwise, the upgrade of Windows 7 has been problem free

  Hello

  What channels do you mean exactly?
  What software do you use? Windows Media Center?

  With regard to the remote control;
  On the European driver Toshiba page, you will find the infrared driver 8.60.2001.
  Please check if you have installed it!

  You should also check if the TV tuner is installed correctly.
  The necessary TV tuner driver v2.3.3.31 can be downloaded from the both driver page

• TV Tuner not found

  I have Windows Vista and all the drivers and service packs are up-to-date. I had UNPLUGGED the TV input and left only the antenna. After awhile, I had disconnected times (antenna and TV out). Recently, I tried to connect the antenna. I am able to set up the TV. However, after completing the click button, nothing comes on the screen except for the message "NOT FOUND in TV TUNER). I check various forums but found no answer so far. Rebooted, disabled and enabled material... nothing works! It shows the material and records are up-to-date. Can someone please? Thank you!!

  I have Windows Vista and all the drivers and service packs are up-to-date. I had UNPLUGGED the TV input and left only the antenna. After awhile, I had disconnected times (antenna and TV out). Recently, I tried to connect the antenna. I am able to set up the TV. However, after completing the click button, nothing comes on the screen except for the message "NOT FOUND in TV TUNER). I check various forums but found no answer so far. Rebooted, disabled and enabled material... nothing works! It shows the material and records are up-to-date. Can someone please? Thank you!!

  If 'he' is Windows - they are not your TV Tuner or that they support.  Go to the manufacturer of the device and see to manually get drivers and the latest software and the troubleshooting steps that THEY suggest.

  (* attention *-they could suggest a new installation.)

• Qosmio G50 - Windows does not shut down without memory stick inserted

  I have a Qosmio G50 running Windows 7. The pc does not stop unless I have my USB stick inserted. Without the USB, I can tell the pc to stop. Without the inserted stick, the pc will say that it stops and remains on the screen closed for 10-15 minutes and then restart.

  However, as soon as I put the USB into the USB port, the pc will stop within 2 seconds.

  It is not easy to understand the situation and explain why this happens.
  Qosmio G50 is not latest model cell phone, so I can't imagine that this strange question comes on the first day.

  Something like this can be done with the factory settings. The configuration, preinstalled software, background running applications and processes on your Qosmio OS are not known to us is not easy to help you with this.
  Somehow, I think that something running in the background blocks of the system. Unfortunately, I can't say what that would be.

  Check a bit.
  By the way: have you noticed the behavior even if you try to use standby or hibernation mode?

• Qosmio g50 screen does not

  I have a Qosmio G50. This morning when I turned on the screen has come for a second or two, has shown the Qosmio logo, then deleted. I spent the morning trying to solve the problems. I removed the bezel and checked that the sons were not cowards.
  I've attached another screen of the laptop that works fine.

  Sometimes the screen, so I don't think that the problem is the screen itself.
  It will be displayed for about a second if I close the lid, and then open it. He will then blink for a second and then drain.

  Also sometimes if I start with the other attached screen, the laptop display indefinitely.

  Anyone have any ideas? It might be the button that turns the screen on and off when the laptop opens / is close, but I don't know where to check.

  PS: The filter of profanity on this forum is total garbage. As if I was not quite frustrated without having to cut and paste my post paragraphs trying to isolate a few expletives ghost.

  Post edited by: redbrigade

  I have the same problem with my G50. According to me, if I have the brightness of the screen under level 5, there is no problem.

• Closing Port 23, Telnet, Windows Vista, not found Service in Services.msc...

  Hello
  I did some scans that indicate I open port 23 (telnet), but I could not close by the methods I've found doing research. It is not in Services.msc and I already disabled services that have something to do with remote connections, but it is always open. I don't have access to the router configuration that I stayed. Any ideas? Thank you.

  Hello

  First of all, he should know that all ports which are related to the network are always open the ready for action.

  Close port means that something is blocking traffic towards it.

  What is the role of the firewall?

  As first thing as suggested above by Lorien-, we need to check if the firewall software is blocking it.

  Also, check the router Port forwarding to ensure that it is not open.

  The UPnP router can open port automatically if there is an application that needs it. So, if you do not use UPnP uncheck in the router.

  I'm not sure the side WAN he usually uses 8080. You can see menu WAN router and see which port is used for remote control.

  Then, you can use these free applications to see which ports them are open and by what.

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897437.aspx

  http://www.Gaijin.at/dlopview.php

  Jack, MVP-Networking. WWW.EZLAN.NET

• Qosmio G50 - 12F does not illuminate

  I got a Qosmio G50 - 12f
  No.: PQG55E-04C02YFR

  The problem is: when I plug it into the DC I got a white light on the photo card dc and a light orange on the picture of the battery.
  When I turn on the laptop, the white light turn off for 1 second (maybe) and return to the original position and the battery light turn off permanently.

  I tried to find answers on the web. What I find that is perhaps due to the power: dc or cable jack connector power (the one that goes from the dc Jack to the motherboard or the power Board of the battery under the mousepad...

  Well, I lost m

  Does anyone have the answer? I want to fix it myself.

  Thank you

  What happens when you remove the battery and try to start the laptop with DC power only?

• Qosmio G50 - FM Tuner/TV Tuner do not work together

  Hello

  I search for a solution to my problem but still have not seen anywhere.
  My problem is with my G50 (Aust version PQG55A-04J01Y) which has the tuner FM (Toshiba FM Tuner FM - 100 v1.1.0.48) and the TV tuner (Toshiba USB DVB-T/Analog Hibrid Tuner v 2.3.3.21) built in.

  I am running Vista Home Premium (32 bit) with all the latest updates from Microsoft.
  I can't get the two to work together, they function separately.
  I'm not talking at the same time. I need to configure each one whenever I have swap between them.

  * To implement, I open WMC and go to:
  * "Tasks".
  * Settings.
  * "TV".
  * Set Up TV Signal.
  * Confirm my region as the Australia
  * WMC then download the latest info for my region and I can then "Select your TV Signal"
  * Here, I get to choose between 'Câble', 'Satalite' and 'antenna '.
  * I select 'Antenna' and click Next
  * I then have the chance to choose between:
  # "Analog terrestrial (PAL/SECAM)" - which activate the FM tuner
  # "Digital terrestrial television (DTT)" - which activates the TV

  If I set up the TV I lose access to my FM radio and WMC tells me that I don't have a FM tuner installed.
  If I set up the FM tuner I lose all my TV channels that I've saved.

  Why the two could not work together? :_|

  Hello

  > Note that in the bowels of the system, there is a 32-bit program FM tuner, but also an FM tuner 64-bit, but maybe you can run a?

  I think you can notice a program 32 bits and 64bitbit because of the different versions of Vista. Vista 64 bit OD needs a 64-bit driver and Vista 32 bit needs a 32-bit driver.

  Back to your problem with the FM and TV tuner:
  I put t have an Australian series G50, but I think the Akuma is right. Tuner FM and TV tuner is a device I think, so you can safely just sort of signals; TV or FM.

  See you soon

• P750 satellite - TV tuner not found

  I have a satalite with tv tuner p750.
  I turned on windows media Center to set up the TV station.
  Message WMC / can't find a tv tuner.
  Looked into without a tv tuner device manager.

  Found the driver on the web site of toshiba, but when I installed, windows told me it did not installed correctly.
  What should I do now?

  > Looked into without a tv tuner device manager.
  Are you sure that the laptop supports TV tuner?
  What Sat Pro P750-xxx you have exactly

• TUNER NOT FOUND

  So I have one installed (supplied with the system) card TV Tuner and it has worked well for over a year and then suddenly stopped working in Windows Media Center. I don't use this feature often and decided to exercise patience, a fix would certainly come from Ms.

  That never happened.

  When I try and use Media Center TV Setup protocols, he fouls a message "NO TUNER FOUND" well, it really is. Occupies a slot and is connected to a cable modem. Something has changed. Can someone give me a simple answer please? Windows 7, 64 bit, Avermedia Tuner on a bridge.

  Worked and suddenly stopped. I allowed Windows automatic update of my windows. Well Yes. When updates are available, they download and apply.

  Perhaps a parameter has been changed that hit my tuner off grid?

  I ran Diagnostics, troubleshooting, they can't find anything wrong with my Tuner. (latest drivers etc..) They "found". BUT no, apparently of WMC. What has hurt turned, I suspect that it is with WMC.

  Thank you

  I've chopped it and discovered the culprit.  It is the tuner Media Center is concerned. You see, even my tuner works with other third party software. Unfortunately, when I bought my TV Tuner card, it was a 2010 model is more consistent with the comms shaped FCC NEWS about implementing digital new blah blah blah.  Point is Media Center has been improved in the procedure of automatic download of windows and now IT does not work with the 'old' Tuner. (why the Tuner was so cheap. Just as some people had to buy a new TV when we went to the.)

  So, you will need to buy a compatible TV Tuner card of 2012 or later. Simple. Costly. Simple. Planned obsolescence. I bought one, and everything is great!

• Qosmio X 500-Midi not found in Windows 7 64 bit

  Ive just bought Cakewalk its not finding any midi output for Windows 7 64-bit, in my Qosmio X 500.
  Can anyone help?

  Have you already contacted Cakewalk support on this?
  I mean they are experts for own product and I assume that it has been tested on different hardware platforms.

  You must understand that the laptop manufacturers do not support the third party software or hardware.