I seem to be missing my t8ExtPEx.dll file. Is this bad?

Similar Questions

• missing os framedyn.dll file

  trying to download the trusteer report I had to contact the & it seems, I'm missing the OS FRAMEDYN file. DLL, I tried cmd but it tells me that I must be the administrator

  This forum is only for Microsoft Security Essentials.

  However, try this

  http://support.Microsoft.com/kb/319114

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• I need to install the Dll files that this wood doesn't don't let me install a new installation of my carpet. A PRINTER

  I'm missing dll files and I downloaded them and I still can't reinstall my printer all in one. 1:e; SIBCSP SCCBASE GPKCSP

  This is the wrong forum.  This forum is for the Vista installation.  Please use the forum material and devices

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Hardware?tab=all

  You probably need to register your dll, and these people are good at it.  When you repost remember to give more details, as the brand and model of your printer.  You should also check the support site for the manufacturer of the printer.

• age of empirs 3 the D3Dx9_25.DLL file missing

  hope someone can understand it.

  3 hours trying to solve this problem and im top.

  When I try to start the game the error message appears ip "is missing the D3D9_25.DLL file.

  I tried to download the update to fix, I tried the installation manual and the problem persists.

  I tried to copy and paste the files associated with the program folder age empires only to get a message saying "see the DXERROR.log or DIRECT.log file.

  which is also usless.

  any help would be greatly appreciated.

  Thanks in advance,

  Krzysztof

  Hello
   
   
  Have you followed the steps in KB 910813, which was proposed by Vinod N
  http://support.Microsoft.com/kb/910813
   
   
  Let us know the status of the issue.

• Where can I find the .dll is missing from my computer files?

  Original title: slbc.dll

  I tried to install the software of the printer on my computer, but I can't because the software tells me that I need to slbc.dll, scccbase.dll, gpkcsp.dll. and Enum. Where can I find these things?

  Try the procedure described in the article below

  http://helpercomputers.WordPress.com/2010/11/05/missing-Sccbase-dllslbcsp-dll-files-for-HP-printer-install/

• How to install the missing dll files when I try to get latest microsoft updates and get the error msg ox8024D007

  I can also access my control panel, but when I try to add/REMOVE a program it says that is missing a required dll file

  You could try auto fixit or manually install the microsoft update agent.

  http://support.Microsoft.com/kb/949104

  Or refer to the knowledge base article:

  http://support.Microsoft.com/kb/956701

  Agent update for the x 86 system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  The updateagent for x 64-based system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x64.exe

  I hope this helps.

• mailbox opening gives missing ad2mcmpgdec.dll file

  Download ad2mcmpgdec.dll

  Every timeI Activ mailbox andclick toopen the notification onface book, the missing of such filenotification arise, how resolethiss problem?

  Hello

  1. don't you make changes to your computer, after which the issue started?

  Looks like this file is part of a program Adobe MainConcept.

  Follow these steps and check if they help.

  Step 1:

  Add the ad2mpegin.dll and ad2mcmpgdec.dll files into your Windows\System32 directory.

  This error message appears because the application you are trying to start cannot find the ad2mpegin.dll on your system file. If you see this error message when you start an application and you recently installed Premiere Elements 2.0, copy the files ad2mpegin.dll and ad2mcmpgdec.dll from Premiere Elements Directory in your Windows\System32 directory:

  a. navigate to the Premiere Elements 2.0 folder. By default, this folder is installed in C:\Program Files\Adobe\Adobe Premiere Elements 2.0.

  b. copy the ad2mpegin.dll and ad2mcmpgdec.dll files.

  c. navigate to the folder System32 of Windows. By default, this folder is installed in C:\WINDOWS\system32.

  d. Paste the ad2mpegin.dll and ad2mcmpgdec.dll files into this folder.

  Note: You need to copy the files ad2mpegin.dll and ad2mcmpgdec.dll to Windows\ehome, in the program folder of the application that you are trying to start.

  Step 2:

  Restore your system to a previous state.

  http://support.Microsoft.com/kb/306084

  This problem comes from changes to the system implemented in the Windows XP Media Center cumulative 2. Restore your system to a State before the installation of this update of Windows.

• missing yvfpemrj.dll file how to solve this problem?

  After reinstalling Firefox on Windows 7 Pro, I get the message that the... yvfpemrj.dll file is missing when I start the computer. Also, when I use google to search, it displays a blank page.

  It seems that your computer might be infected by a Virus (http://www.bleepingcomputer.com/forums/topic446165.html )

  I suggest the following resources:

  My Firefox problem a result of Malware is an article from the Mozilla Support with some good advice to avoid and fight against malware.

  To verify that your system is clean, perform the following steps (no official Mozilla tips, just good practices of personal experience)

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.Malwarebytes.org/

  Download and launch TDSSKiller http://support.kaspersky.com/faq/?qid=208283363

  Download and install Microsoft Security Essentials http://windows.microsoft.com/en-US/windows/products/security-essentials (no not official approval, but I personally recommend MSE as a great permanent anti-virus)

  Check all Windows updates.

  If you still have problems with Malware after that, I would recommend either http://www.bleepingcomputer.com/virus-removal/, or have your computer cleaned by a professional.

• Satellite Pro L300 - missing dll. files after the installation of the printer

  Hello

  I have missing dll. files on my Pro L300.
  When I try to install my printer software it throws an error message upward.
  I now have the missing dll. files, but can't seem to install them. Someone knows what to do with them?

  I am running XP and the files are sccbase.dll slbcsp.dll

  I have listed this question before, but it has never been on the forum?

  Thank you very much

  Q

  Hello

  I searched and slbcsp.dll sccbase.dll and found someone who had the same problem after installation of the printer software.
  Check out this site:
  http://forums.CNET.com/5208-6142_102-0.html?ThreadId=275051

  Please post some feedback after you try the workaround solution posted here.
  It looks like a registry key must be changed.

  Good luck

• Missing or corrupt hal.dll file. Computer will not start in XP

  All of a sudden my computer does not open in XP.  Says it has a corrupt or missing hal.dll file I don't ' have a Windows XP CD.  What I can to correct without losing what is on the computer?  Must have been an update last night, because it was working fine before.

  The usual problem with this message is not the hal.dll file is missing or corrupted - it usually just means that XP cannot find it to be abandoned because the file system has somehow got corrupted something like a power interruption, restart or abnormal termination... or your c:\boot.ini file is somehow corrupted (or both!).

  You will have to start on something to fix.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (This includes the plug pulling, power buttons, remove the battery, etc.).

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Then, you perform a chkdsk/r from the XP Recovery first Console and report back how it works (which may be all you need to do):

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Kernell missing DLL files needed to start

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Windows will not start missing or corrupt the kernel DLL files
  • has worked fine, it seemed. off and accumulated for two weeks, now no start. I have raid 1 drivers loaded and to log on to the recovery console. Should what commands I enter? Can I run the filesystem with repair check and if so, how?

  Well I don't have a second operating system as needed for the fix in the link. I only had the recovery console and it wouldn't let me CHDIR. Formatting disk that I answer. Thnx for trying it if.

• Problem with missing mfc110.dll file?

  Mfc110.dll missing file, preventing the execution of the downloaded software program.  Apply a fixer of DLL file simply said mfc was already on the computer.

  Anyone suggest a solution full proof?

  Hello

  Please contact the Microsoft Community.

  Missing persons seem to be a component of Microsoft Visual Studio.

  I only see the answer from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_programs/error-mfc100dll-missing-while-launching-the/4eca482d-D042-E011-90B6-1cc1de79d2e2

  We know if you need help.

• Photoshop 2015.5. PS does not update and will not open. Missing 4 dll files.

  Photoshop CC (2015.5). PS does not update and will not open. Missing 4 dll files.

  VulcanControl, VulcanMessage5, tbb and ScCore. PS worked fine earlier today and has worked great for over a year.

  Windows 7 update to 10 eight months ago.

  Exit code: 184

  -------------------------------------- Summary --------------------------------------

  -fatal error 2, 0 error (s), 1 warning (s)

  FATAL: Error (Code = 184) running the 'MoveFileCommand' command for package: 'AdobePhotoshop17-Core_x64', version: 17.0.1.159

  FATAL: An error has occurred in the installation of the package (name: AdobePhotoshop17-Core_x64 Version: 17.0.1.159). Error code: "184".

  WARN: Cannot move the card to the address 'C:\adobeTemp\ETRD35C.tmp\1\Application\Required\DynamicLinkMediaServer\32\libmmd.dll' to 'C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\Required\DynamicLinkMediaServer\32\libmmd.dll' error 32 the process cannot access the file because it is being used by another process... Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify.

  Hey gene,.

  Thanks for getting back to me. I uninstalled and re-installed PS and everything seems to work very well. Put same Lightroom update. Not sure what the problem was.

  Thank you

  Clay

• In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6.

  In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6. It was very useful and should be added to version 6.

  https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars

  If you mean the - and + Zoom control so it is always there in Firefox 6.0

  or
  View-> Zoom

  Edit: I see that you are using Windows 7 where the menu bar is hidden as a Firefox orange button by default. Some menus objects much may not be visible in the menu of the Firefox button. Show the Menu bar or use the - and + Zoom controls buttons.