I try to use an application called Docstogo

Similar Questions

• How to record streaming RTP of Wireshark and play using an application called Audacity

  I use dto this regularly a few years ago and used to know all the steps to get the stream RTP of Wireshark and then save to a file and then play using an application called Audacity.

  In my opinion, were the steps that I used to do:

  1 Wireshark - put in place since a file display server to display only the RTP.

  2 then in Wireshark---> statistical sub---> Show all streams---> and analyze---> then save payload as 'gross' or ' to the ' can't remember - forward / reverse / both

  3 then play the file using Audacity.

  I am clearly stating what I need.

  Now when I do the above I can not read the file with Audacity.

  Audacity says:

  Audacity did not recognize the file type. If it is not compressed, try to import using "Import Raw".

  We must continue to use them to remember the steps.

  Any help much appreciated.

  If the RTP stream uses G.711, you can directly use the audio player of wireshark:

  -in Wireshark - telephony - Voip calls

  -Select a call - then click the reader button

  -Click the Decode button

  -Select one or more streams of data and so click on Play

  

  You can also use RTP analyze tool to record audio in .au format and play with Audacity.

  If you prefer to save the file in .raw format, you can open Audacity and import the file in raw mode and specify the codic law for g.711A so or u - Law codec encoding G.711u and therefore equal to 8000 Hz sampling frequency.

  

  Kind regards.

• Error 150:30 when you try to use an application for the first time after installation

  I have CS 5.5, but need to temporarily install the suite CS4, but when I try to use it after installing a pop-up windows is displayed with the message "Error 150:30" and ask me to restart my computer before using it. I'm sure that there is only one computer using my serial number, but when I try to proof on a second computer it tells me that the serial number is enabled in both computers already.

  Hello

  Error 150:30 refers to licensing. You must contact customer service and verify the number of activation of your software. If it's good, then you can follow these steps as appropriate for your operating system:

  http://kb2.adobe.com/cps/512/cpsid_51260.html for MAC OS

  http://kb2.adobe.com/cps/405/kb405970.html for OS WIN

  I hope this helps.

• BlackBerry Smartphones Firewall error when you try to use new applications of the AppWorld

  I have a BB "BOLD" (out of business).  When I try to register accounts with new App World, as SlackerRadio applications, I get this message:

  "The request... a attemtped to open a connection to a location inside the firewall and outside the firewall which is not allowed by your policy."

  Because I don't have a BB company, I'm not aware of any it policy or how I can adjust.  Everyone is having these issues?

  Thank you

  Jacquie

  • Carrier: AT & T
  • BlackBerry model: "BOLD"
  • BlackBerry OS (can be found in Options-> on): v.4.6.0.167 (Platform 4.0.0.157)
  • Version of App World (can be found by going to Options-> Advanced-> Applications) 1.0.0.28
  • BIS or BES (personal use or business use): BIS

  JacquieSamples,

  Just to be sure your BlackBerry is not a test of policy COMPUTER looking in Options-> Security-> General settings and scroll down to see if there is anything that is listed next to the field name of the IT strategy, if you see something there default even you have a COMPUTER policy.

  This article also shows how to reset a firewall prompt, you can have on your device:

  http://www.BlackBerry.com/BTSC/KB04050

  Please let us know if this solves your problem.

• My CPU usage climbs to 100% & an application called iexplore.exe uses 99% of CPU time.

  Original title: iexplore.exe

  When I activate "Task Manager", my CPU usage climbs to 100% & an application called iexplore.exe uses 99% of CPU time. This slows down my computer. I can turn it off without causing other problems?

  After restarting in safe mode and then restart in normal mode, all is back to normal. Thank you!

• When I try to use my Microsoft Picture It application I get a "Microsoft Visual C++ Runtime Library" error__no error numbers. Microsoft Visual C++ Runtime Library program: Microsoft Picture It 2002\pip.exe__

  When I try to use my Microsoft Photo ITI application I get an error of "Microsoft Visual C++ Runtime Library"
  no error number. Microsoft Visual C++ Runtime Library program: Microsoft Picture It 2002\pip.exe

  I am using Microsoft Windows XP Home Edition Version 2002
  Service Pack 3

  The program stops.  It seems that I've adjusted started to have this problem after I had upgraded my browser from Internet 8.

  When I try to use my Microsoft Photo ITI application I get an error of "Microsoft Visual C++ Runtime Library"
  no error number. Microsoft Visual C++ Runtime Library program: Microsoft Picture It 2002\pip.exe

  I am using Microsoft Windows XP Home Edition Version 2002
  Service Pack 3

  The program stops.  It seems that I've adjusted started to have this problem after I had upgraded my browser from Internet 8.

  ========================================
  Might be interesting to try to download and install the following scroll:

  Picture It! Publishing 2002:
  Patch for 19299 (PI19299.exe)
  http://tinyurl.com/dfeq28
  or...
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0fb68178-d6bd-41BD-9f00-f44ac7ca9e28
  John Inzer - MS - MVP - digital media experience

• I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop I get an error message telling me to download and install App Office creative cloud so I didn't and it launches the application craps out and gives the sa

  I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop, I get an error message telling me to download and install App Office creative cloud so I do and it begins to it out craps and gives the same message over and over.

  Hi Paul,.

  Migration wizard does not work in the case of Adobe applications.

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• I try to use After Effects on my laptop, but all his telling me, is that "you can't use this version of the application"Adobe CS6 effects"with this version of Mac OS x.

  I try to use After Effects on my laptop, but all his telling me, is that "you can't use this version of the application"Adobe CS6 effects"with this version of Mac OS x.

  Install the latest update of CS6:

  http://Adobe.LY/DVA_updates

• Report Generation Toolkit, production of the 2147417842 error, "The application called an interface that was marshalled for a different thread."

  Hello world

  I have an application that stores data in an Excel worksheet by using the report generation tool.  My VI have worked well in the past using Excel XP, but since I have upgraded to Excel 2007, I get COM errors like this:

  "2147417842 error occurred while the application called an interface that was marshalled for a different thread. in Excel_Insert_Text.vi', this is the exact wording, even with the odd punctuation and capitalization.

  The first occurrence of the error is not determined.  Sometimes, to the record 10 sessions, involving a new .xls file, may occur before this error.  Once this error occurs, I must leave LabVIEW to solve.  If I try to do something with Excel, I still get this error, even if sometimes it comes out different source Excel_Open.VI is another.

  These screw logging worked fine until upgrading to Excel 2007.  I checked and I have been using a very old version of the report generation tool, v1.0.1.  I read the documentation and had a big sigh of relief when I realized that I needed to upgrade to v1.1.2 for Excel 2007 help.  However, even after the upgrade, I still get the same errors.  I'm using LabVIEW 8.0.1 and I also build these screws in an application.   The error occurs in the application built both in the IDE of LabVIEW.  Anyone out there have any idea what I can do to fix this?  I google a bit and discovered it is a COM error, but I can't find any reference to the report generation tool specifically.

  Thank you

  Phil

  I think that suits him!

  Here's what I did: I left privileged execution environment level upper VI as "as the appellant.  I tried the "user interface" configuration, but it seemed to slow down considerably the program.

  Then, I found each sub - VI, calling the report generation tool and define the environment for running favorite "user interface".  All the errors went away, and the program is much happier now.

  Big assumption on what a Christian, thank you!

• Apple TV (9.2.1) removes the internet connection when you try to use Siri

  Greetings,

  I think I saw network related issues with my Apple TV. Everything works fine most of the time. But sometimes, including, but not limited to, when I try to use Siri, Apple TV almost always drops the wireless internet connection. I've included a picture below of exactly what it looks like. I scoured both online that I can but it doesn't look like anyone has the same problems.

  I called Apple support and they suggested that I connect to another source of wifi. I used my hotspot on my iPhone and the Apple TV has worked well without any hitch in the connection. This leads me to believe it's firewall partner.

  However, I have disabled literally of each firewall setting I found in my router and still cannot find a solution. I also use a WAP browser in addition to router which is what my Apple TV is connected to. My WAP is an enterprise-level device, but I'm having issues access to the features of the admin of it network. Before I go and reset my WAP I wanted to get additional advice from people with experience in networking and firewall, especially with services like Siri.

  Thanks in advance. Pics and info of additional device below.

  Michael

  

  

  tvOS 9.2.1 (13Y772)

  A1625

  Zoom: off

  United States

  English

  Hello. I don't think that this has nothing to do with the firewall, etc. When you use Siri, you send your voice via Bluetooth to ATV. If your WiFi signal is weak, the Bluetooth maybe block, if you are using 2.4 GHz. could you try to connect to a network of 5 GHz and see if that helps?

• Firefox does not open, and when I try to use the "run", it says that the file has been moved, etc. I use Windows 8 and I can't lose my favorites. Help?

  Firefox has been great to work on my computer for months and then suddenly he could not load pages. So, naturally, I restarted my computer, but when it restarted Firefox does not open. The icon lights for a bit as usual, then it fades and never actually opens. When I try to use the "run" command, I get this error:
  "C:\Program Files\Mozilla Firefox\ refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »
  I also tried the same thing for the file in the x 86 folder, but it gave the same error and I went and looked for the files in the given location and they were there.
  Firefox is not to fall down, so he isn't there an other error message, I can give you.
  The things that I had my favorites are really important, I can not lose those, but I am fine with anything else have to re-installed, etc..
  Help please?

  I've never tried it myself, but the forum has a series of measures for a "clean reinstall" Firefox. Even if you do not delete the record of your personal settings (AKA profile) during this process, a backup of this folder is always a good idea in case something goes wrong.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• Satellite P500 - blue screen on webcam whenever I try to use Skype

  Whenever I try to use Skype all I get is a blue screen where my webcam should be. I checked to see if my webcam doesn't work at all, and all I get is the web cam iniliziation failed Please check device and restart.

  I tried this but nothing helped. I also tried to reinstall the camera and update the drivers. Still nothing.
  Any help on this would be greatly appreciated. I was told that if I update the BIOS it might be useful, but I also said that this could screw up the laptop completely...

  Brenton

  In front of me, I have Satellite P500 and I use it almost a year now. Since the first day I use it with Win7 preinstalled original and Skype.
  Up to now, I have strength to have one problem with cam or Skype. Everything works fine.

  Are you using the original pre-installed OS? Since when you noticed this problem?
  You can use cam with other applications?
  Cam is listed in Device Manager?

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices.

  I have a Macbook air running OS X El Capitan. I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices. I don't know if I need to restart the time Capsule or change the wireless setting, etc. ?

  Please advise...

  The TC appears in airport utility? If not then it is probably not part of your network or is lost... upgrade installed you El Capo because there a lot of questions.

  What is the TC plugged into the network by ethernet? And configured properly? Are you to internet via the TC... but can not see his drive... that would be typical?

  Have you set Finder preferences to display the network drives? Apple keeps making it difficult for some unknown reason.

  You actually have to mount the drive TC if it appears under shared... it still may not appear if you double click on it. Under the search box on the top of the right hand you see Connect (As) box, type the name or IP address of the TC in there... Make sure that you save the password from your keychain.

  I try to use my Time Capsule as external hard drive

  For the storage of the files it is fine.

  For the execution of direct files for an application in the Mac, you are very likely to damage or corrupt the file at some point.

  And how do you do backups? Time Machine can't help you... it won't work.

  Backup is crucial, especially if you do things apple say not to do... That is to say move your photos or the iphoto library to the TC and try to use direct from there... expect any day to need a resumption of the library.

• Error message when you try to use Toshiba Disc Creator

  I recently upgraded to Vista SP1 SP2 and now I get an error message when I try to use Toshiba Disc Creator 2.0.1.3. "An unexpected error has occurred. Error code 32007C-26-00000001 "it worked perfectly before.

  This is the first time that I used it since the update so I think that SP2 may be part of the problem, but I'm not sure. I could not find updates for TDC. My system is a Satellite L305-S5919 with Vista 32 bit.
  Someone has an idea of what could be the cause of this error?
  Thank you

  Have you tried to roll back the OS in time and checking the previous features once again, just to be sure, it has something to do with the installation of SP2?

  I put t know if anyone here can offer a solution but I m quite pessimistic in this topic and don t think that Toshiba provide new version.
  AFAIK Toshiba disc creator is always available with single and also downloadable image recovery application.