I want default time remapping controls on clip

Similar Questions

• A clip I made the time-remapping on the shortening.

  Okay, so, I'm still very much a first baby and this is the first time I tried to play with time-remapping. First of all, I'm on a PC using first Pro CC 2014.2.

  Basically what I've done is created a cube rotating '3d '. I want to do with it is to rotate quickly, then slow down so that it is possible to read what is written on it. I got successful and ramp at the speed of the way I had hoped.

  However! The clip is really long (I wanted to make sure that I gave myself enough time to play with because I wanted to speed up a bit), then I tried to shorten the clip... but when I do that, anything after the ramp becomes black. The first second or two before the ramp is always visible and spinning, hit the ramp and blackens. I tried just to drag the ends of the clamp as using the razor tool. The razor tool allows me to snap, but when I delete the excess part it always disappears.

  Here is a screenshot just after using the razor tool.

  

  And it disappears when I delete the excess part.

  

  I have a feeling that he might have something to do with the first who need to be able to 'see' what's coming or something, and by removing the excess it is unclear what more can be done. But I wanted to ask and see if there was a way to shorten, if not I'll just throw something above the rest of the clip so that you can not see it always go to go back and continue on my way.

  I just had a quick glance and I don't see what is happening. The easiest option is to export the master as an intermediate file without loss and change. When you make the time remapping effect, I always send to AFX and use the efx superior Timewarp, it has its own quirks but it does a better job.

• Time-remapping has a keyframe when I put new clip in the timeline:

  Hello

  I use PPCS4. I noticed that no matter what new clip that I bring in the timeline to a keyframe effect time remapping to 100%. Is this normal?

  I would like to see no time remap keyframe by default and there are still 100%. The reason is that I use the Mercalli stable plugin and will not work if the time remapping a key image on it. So I always have to erase it first was can use the plugin. A bit boring.

  Thank you

  Simon

  I use PPCS4. I noticed that no matter what new clip that I bring in the timeline to a keyframe effect time remapping to 100%. Is this normal?

  Yes, it is a normal behavior.

• Stabilizer of Warp and time remapping with 4 k clip in a sequence of 1080 p

  Hello

  I work with 4 k videos in a sequence of 1080 p. This way I can zoom the clips and get more details in some parts of my video.

  For some of my clips, I need to use the gradual stabilizing effect combined with time-remapping. To use stabilizer chain on my project, I need to create another sequence to adapt to my 4 k resolution, apply the chain stabilizer and then add this new sequence to my 1080 p sequence. Chain stabilizer works very well until the time remapping effect is applied. This new seens effect just neutralize the stabilizing effect of deformation.

  Is it possible to use these two effects combined with 4 k clips?

  Thank you!

  Try the k 4 nesting sequence before you add the time changes.

• Red numbers at the top left of a clip - time remapping?

  When I move a clip backward or transmits displays in the upper left corner of the Red clip numbers, which say more or less about numbers if I move backward or forward. I think it is time remapping, how can I disable this feature and my clips of back to normal? Thank you

  The video and audio are not unrelated but when I move the video it separates audio

  Looks like you might have disabled the link button. Be sure to check it out and you should be good to go.  See the image below.

  

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• What is the best way to stabilize the Warp has clip AND time remapping it?

  I can't do these two operations successfully.

  Any ideas?

  First time remapping.

  Nest.

  Teleport on the nested sequence.

• Time remap value is grayed out.

  First CC

  When I try to time remapp a clip I can add keyframes and can change them on the timeline.

  But why can't use them like other keyframes for the Position and Zoom?

  I can't change the scale, I can't catch them and move them to the video effects tab.

  I can only edit and move them in the Timeline... But I want to just total control... I want to give an exact value... I want to make faster the 838%...i want to make correspond them with the other keyframes...

  Please halp...

  Time-remapping is performed on the timeline.

  Time-remapping doesn't have the same kind of key frames, like the other properties.

  If you want more control using AE for this.

  You can post a screenshot of what is exactly gray?

• Can't reposition the timeline for the time remapping effect

  I use Premiere Elements on a PC running Windows 8.1. I am trying to apply the time remapping effect to a section of an element. I've marked the beginning and the end of the segment I want to remap with markers of the scene. Set the timeline so that the segment that I intend to remap appears on the screen. When I click on the time remapping effect control (Tools |) Redefinition of the time), the timeline moves to the end of the clip, and I can't reposition to display the part I want to without leaving the screen of time remapping. How to keep or move the timeline on the part I want?

  When you select the option of time remapping in the tool button in the action bar, you should go to an any other workspace, one dedicated to the time remapping effect. You shouldn't see the chronology of regular edition.

  You click to select a clip on the timeline, then you click on tools, then time-remapping. Opens in the workspace of time remapping.

  Is this what is happening? It is not clear from your description.

  You are actually clicking to select one (and only one) clip on the timeline, before selecting the time remap tool, right?

• time remapping newbie

  Coming from first - I just looked a little tutorial and I sorted basics: I dragge my keyframe for the end of the 8 min to 1 min clip, but I'm not part of a clip that I want to play at speed normal 25 fps in this case. I added 2 new keyframes and tense than secion new but have no idea of what is the fps. Its easy to the speed of the ramp upward, but I do understand an eloquent or easy way so he can play at normal speed.

  If things get confusing, simply split the clip in several layers / segments. Nmowhere t - it say you have to do everything on a single layer. Yet, I am not sure your problem, you just went come too quickly. By default the time remapping will create a start and end keyframe and they will make sure that it plays to its native speed. So adding several keyframes inbetween would be the same. So basically you have added your segment with constant speed first, then re-arranged and added multiple keyframes on the timeline after you made sure that your segment plays like you want...

  Mylenium

• Can one after effects related Composition keep time remapping?

  I use CS6. I have a clip of 1 second test in the first I want to slow down to half speed. That's what I did:

  1. I chose the clip and replaced with After Effects Composition.
  2. In AE I used time-remapping to slow down the clip. Nothing I have AE can show the real slows the effect - unless I export and made into a new file.
  3. I can import which made recently slowed down file in first to replace the original item, and everything is OK.

  However, I prefer not to have to make and the extra file.

  QUESTION

  Can you my version of first link to AE (where I change the speed of the element), and when I finally exporting first, at this stage, it is rendered?

  If not, the latest version of first with its flow optical (or whatever it's called) has the same functionality and quality and AE time remapping?

  Absolutely, I can confirm that exporting AE bound dynamically Pr CC2015 comp that has Timewarp applied the results in an exported clip that interpolated frames and not simply double frames.

  See you soon,.

  Jeff

• Reverse the time remapping effect?

  Hi, I have a membership with the time-remapping applied via an expression and a skeleton key slider controlling the speed of reading of percentage.

  Inside of the time remapped composition there is an effect property I want to be done by the time remapping. Is it possible to somehow invert the time remapping effect so that it appears unchanged in the composition of parent?

  I think I'm close, but I still can't understand:

  -Hand Comp, example time: 0:00:14:18

  -Comp time to parents: 0:00:14:20, remapped to time right now (maybe before and after by a few images)

  -Nested Comp expression of effect property:

  var time = counteractTimeDisplacement - (((comp("__Main_Comp__").layer ("FrameDifference") .timeRemap - 1)));

  etcEtcEffectPropertyValue = somethingReferenced.valueAtTime (counteractTimeDisplacement);

  
  

  -FrameDifference Composition (simply shows the weft of the difference in time)

  Remapped time: 0:00:01:02 / / added 1 second to allow negative values, when the time remapping effect is less, perhaps that should not be a timeRemap property, but I don't know how to use time on an object. null values

  -Expression of remapping the colors:

  ()comp("Main_Comp").layer ("Parent comp') .timeRemap - time) + 1

  Above doesn't work and seems out of step. I realized the FrameDifference composition is also indirectly done by the time remapping effect because the nested composition can access it and its remapped, so I tried for the composition of FrameDifference :

  -Composition FrameDifference

  -Expression of remapping the colors:

  (comp("Main").layer ("Parent model") .timeRemap .valueAtTime (comp("Main_Comp").layer ("Parent comp') .timeRemap) - .timeRemap comp("Main_Comp").layer ("Parent model")) + 1

  Its still not sync, can someone who understands the remapping / time better than me please help I can't see where im going wrong. Yet once I can't get out of the effect inside the remapped comp and use separately as this will cause other problems.

  Thanks for reading

  You make it too difficult. If you have a layer or element that you do not want be affixed by the time remapping effect then put this element in comp. Another thing is just a waste of time.

  Change the speed of reading over time can be very complicated. The best way to understand what you do is look to the graphics editor. You need a much more complex expression in order to speed up and slow down playback without taking the time reverse. Please see motionipt.com where Dan Ebberts can show you how to make the ramp upward and boat speed reading thing.

• Visualization of music. Time remapping problem!

  Hey everybody. I played with visualization of music after effects a little and now I'm in a bit of a pickle. Many channels of music publishing have visualizations with particles and or animations that change speed based on the music. I have a copy of Trapcode soundkeys so I can turn the music in keyframes and achieve such animations, but here's my problem.

  If I time remap a composition playing time * 1 + Enter keys sound after the typing animation kick goes to the rear where it would have been without the kick. Is there a way to make a demo you time remapping only go forward? Y at - it a way of expression that checks the value of the last image and I'm way off?

  For example Monstercat make their background of particles. Is the speed of the particle generator ramp or there at - it a way to get similar effects of time remapping, so it could be used on more varied and interesting effects. Any help and responses are greatly appreciated!

  Video example:

  [E] - Stephen works - Porkchop Express [version Monstercat] - YouTube

  Thank you very much!

  Tapio-

  Managed to get what I wanted with this practical guide to Dan Ebberts: Expression of speed and frequency

  I don't even think of using the integrals and others. Now, I can input to output of soundkeys in a sheath of control that integrates it and cumulatively becomes bigger and bigger that the sound happens so. Then I can make the time remapping effect following.

  I'll have to play with all these new possibilities!

• time remapping only keyframes.

  I know it's possible to control selection of kinship between the comp. so that the blades in a model cursors or wha Ewer in one other comp. but is it possible to time remapping those keyframes.

  
  

  lets say I have a lets comp. call comp (1) it has a solid blue, a solid red and a comp (2) containing a layer of setting with 2 sliders.

  
  

  in comp (2) I animate the slider that the slider, it starts at 0 we a second goes up to 100 more. slider 2 starts at 0, then up to a 100 while cursor one falls down... or something like that...

  
  

  I am now able to choose the cursor to whip one and two for the opacity of the red and solid blue in comp (1).

  
  

  Now when I play comp (1) solid red goes from 0 to 100 and then the blue charge to do the same thing.

  
  

  Here's the question:

  
  

  I hope that when I have the time remapped Comp (2) comp (1) solids would fade and go down faster or slower depending on how I have time remapped comp (2) I comp (1).

  but it backs do not work as I expected. keyframes don't move at all, but are kept synchronized whit timecode regardless of my time-remapping.

  is there a way that I can time remap keyframes...

  hope that makes sense.

  If you change a cam multi session in AE you do not use the software as it was designed. Your model will be a mess, check timing on cuts is extremely painful and difficult, changes will be almost impossible and it will take ten times longer than the cutting project in Premiere Pro. AE is not a Publisher. AE was specifically designed to create Visual effects or motion graphics shots or in some cases, a few sequences that you change in a move in a NLE such as Premiere Pro. 90% of my comps AE are less than 7 seconds, because 90% of my cuts in all the movies I make are less than 7 seconds. If you set up your multi cam project in Premiere Pro Cup Multi Cam can be almost as fast as direct switching. You just need to learn how do.

  If you need to perform processing of your shots in AE and then cut it into Premiere Pro, choose the photos you want to fix first. If they are short, and then use dynamic link to process the shots in AE. If every time a need for treatment or plans are long, depending on the settings that you want to do, a better option is to make a digital intermediate (DI) by using a lossless format (or better yet a 10bits or better DI) and do your treatment in AE, and then change the final output in Premiere Pro. Since it is a music production, you'll also want to do your final mix in Audition to take full advantage of the tools available to improve playback of your music.

  If you really want to use a cursor to cut between the two cameras, then that is easily done by linking the opacity for the two layers for a cursor that you animate from 0 to 100. You simply place 100 - in front of the expression of the second camera. If you have two cameras, you could add a checkbox and an if statement then you should change the box to change between 1 and 3 or camera camera 2 and 3. It would quickly become a complex montage and time consuming, and it's never going to be as fast or as efficient as the editing in Premiere Pro using the multi camera configuration.

  If you really want to try it should look like this for 2 cameras:

  Place your cursor on the opacity layer and name it the cursor something meaningful like 'change Camera.

  Camera layer opacity 1.

  thisComp.layer("Controller").effect ("change Camera")("Slider")

  The opacity of the layer camera 2.

  100 - thisComp.layer("Controller").effect ("change Camera")("Slider")
  It will look like this:
  
  Who's going to do in AE and give you an overlap perfect between the cameras, but I wouldn't try to make that kind of a tool for editing in AE in the first place.
  EDIT: I forgot to mention that if you do not want a dip in brightness when melted between the cameras, you must set the blending mode to add Alpha. You do not have the problem in Premiere Pro.

• Time remapping of these two A / V in multilayer Timeline?

  I have a pretty complex video created in first CS6 with 8 channels of video that are overlapping more 2 Audio tracks.  I need time-remapping all THE tracks together, the audio and video (which must remain synchronized) for just one segment in the middle of the video.  How?  Can I time remap a whole workspace? Will there be a great way to get there?  Suggestions appreciated!  Thank you!

  I think this will work:

  Place the cursor at the beginning of the section you want to change. With no clip selected use cntrl K (PC, sorry don't know mac) put a cut at the beginning of your region remap, then the same thing to a Cup at the end. Then select all the clips in the cut section and nest.

  Hope that helps.

• Time remapping a nested sequence results in video black/empty

  Hey!

  I have a long sequence (47 minutes), I want to remap time (to increase the speed of certain keyframes). I therefore nested sequence in a master sequence, where I make the time-remapping. However, I feel what seems to be a weird bug: to a certain slice turns black/empty video and stays that way - even if the original sequence keeps the video material.

  It's not helping to split the clip (nested sequence) in small clips and time remapping those individually - just empty frames appear earlier in each clip.

  Export works very well

  When I export the sequence as a medium, the output looks very good however.

  I hope that you are able to help me or tell me, if I do something wrong.

  Thanks in advance!

  Hardware information

  I work on a MacBook Pro (retina, 15 inch, mid-2014).

  You can also try to change the software-only rendering engine. It's under "project settings" in the menu.