I want to make fiber optics

Similar Questions

• 55VL900A and BDX4300KY - TV is not output Dolby Digital fiber optic

  Just installed my new TV, 55VL900A - great picture, very happy. I have a BDX4300KY a drive blueray and Foxtel connected to the TV via HDMI.

  The TV has audio output optical fiber, which I run for my Yamaha DSP - A1 amp.

  The Blueray and Foxtel are defined to pass on Dolby Digital through HDMI.

  Problem 1: TV does not have Dolby Digital of the fiber optic connection.

  Problem 2: If I run audio blueray or foxtel fiber optics directly to my amp, there is a sync problem. The audio is delivered earlier than the image.

  I searched and found no results in my manual, or in the forum. Help, please.

  Thank you, Mike.

  Hello

  I put t have the same devices at home, but I use the optical cable for sound. It is connected to my blue ray and Technichs amp player. I use 5.1 home theater connected to the Technics. The sound is perfect.

  I put t know how it works on TV Toshiba but check please if something should be enabled there.
  > The TV does not have Dolby Digital of the fiber optic connection.
  See s operating manuals and do not forget the optical output must not be activated. Optical cable is connected to the amp in the optical port marked as TV in the back? Don't forget that bulks is set to TV chanel when you want to hear the sound of the TV directly. In my opinion, it should be best option for you if you will be able to make it work.
  > If I run audio blueray or foxtel fiber optics directly to my amp, there is a sync problem. The audio is delivered earlier than the image.
  Which is really strange. Can you please test it with cable audio normal cinch? It will be interesting to know if the same problem occurs again.

• I get the message that dashlane officer wants to make changes.  How can I stop this?

  I get a message dashlane agent wants to make changes and I would like to know how to stop this message from appearing.

  Try to go to Safari/Preferences/Extensions and disable all extensions. Quit Safari, reopen and see if the site to load now. If so, enable the extensions one or two at a time until you find which extension is causing the problem.

• What is UIMgmt?  He wants to make changes in my MacBookPro ElCapitain 10.11.05

  What is UIMgmt?  He wants to make changes in my MacBookPro ElCapitain 10.11.05. Should I let him make changes?

  Have you installed a kind of 'Security' software for your Mac? Then, you have two options: uninstall it (preferably) or let it do its thing, which can be.

• I want to make shortcuts on my desktop

  I want to make shortcuts on my desktop for some Web sites that I use all the time. In Solution Explorer, I just right click and send a shortcut.

  However, Firefox load me click on the symbol of the 'world' to the left of the address of the site to make the shortcut. This does not work because I do not have a symbol of 'world' next to the web address. I have either a padlock or a symbol of binoculars (finally what looks like binoculars) and so I am unable to do what suggests the Firefox.

  This is driving me crazy and is one of the things (like the bookmark system) that I don't like about Firefox.

  Is there someone who can please tell me how to do it?
  

  Thank you.

  In addition, if you do it often, there an add-on to send a shortcut to Windows without having to manually drag. I have not tried myself:

  • His page on the Add-ons site: https://addons.mozilla.org/firefox/addon/deskcut/
  • A study describing an additional installation step if it does not work (the extension has been updated in 2011): https://addons.mozilla.org/firefox/addon/deskcut/reviews/490684/

• I want to make a list for my customers

  I want to make a list of clients, so I know that I have for customers

  A list for what?
  A list of mail?
  Open the address book window one, click new list.

• I want to make a donation, but not to give my name and address

  I want to make a donation, but you askoing for my name, address, etc. I don't distribute these unless there is a direct need (deliveries, etc.). I can not just give? I have an account of Firefox and I am connected.

  Thank you

  Nick

  Try using askjoin [at]mozilla.org as indicated on the FAQ page.

  Sorry, most of us is voluntary and is not directly involved with the donation procedures.

  I imagine that, unless you use some sort of secure terminal and are present in person the number of transactions; or postal donations require the address of the cardholder for security reasons. Otherwise perhaps fraudsters could clone and use your card or change the billing address without realizing you it.

• Photos? I have a number of pictures I want to make a photo book. Howevmake a photo book. Re the photos in question appear only in 'Photos' as a 'iPhoto event' how I arrange for these photos to put in an album to make a photo album?

  Photos? I have a number of pictures I want to make a photo book. However, the photos in question appear only in a 'Pictures' folder as "iPhoto events." I can't copy them into a book format. Can someone help me or show me how to transfer these photos in a Photo Book album?

  Select the photos that you want to use in the book and use the file ➙ book create menu option:

  

  

• Recurring "Finder wants to make changes.

  Left some files old mac for my Mac Mini. When I try to do something with these files, deletion of an example, I get the "Finder wants to make changes. Type you password... "for each file/folder.

  These files and folders don't recognize you as the owner. You must change their attributes of permissions to allow that you read & write access. Collect the files in a big file. Then, right-click on this file and select 'get info '.

  In the Info window, said open the padlock under "sharing and permissions" ensure that next to your name of the permission "read and write" Finally, click on the gear icon bit and choose 'apply to enclosed article' confirms the dialog box and you're done. This should solve your problem.

• fiber optical sensor su19 110 115 a 126 vs nor usb 6008

  Hi expert... I am looking for idea or help on my project. I try to get the measure of mention nor USB 6008 sensor output. In fact, I'm new with nor peripheral usb n still study n the search on internet or n. forums I found an idea to connect the sensor by aoi, but I can't seem to get a measurement any. Is the sensor can connect directly to the device usb or need some custom wire diagram between them. Thanks in advance

  First of all, it is useful if you name the manufacturer of the sensor. A single part number means nothing to most of us.  You use the sensor fiber-optic Pepperl + Fuchs? Even better is to display the technical/manual plug of the sensor or links to them.

  The data sheet that I found for the sensor to Pepperl + Fuchs is not very well written, in my opinion. It seems that the outputs are impulses with dependent amplitudes of the voltage and the frequency or the timetable set by the mode of operation.

  If it's the device you use, the only way you have any possibility to decode the outputs with the USB-6008 box is to measure with an analog input and then process the data in the software. According to the supply voltage, you will probably need a voltage divider to reduce the output voltage of the sensor to a level compatible with the DAQ hardware.  You also won't be able to use the high speed of the probe because the heart rate exceeds the Nyquist limit. In standard mode, you mighte be OK, but you can use a single channel of the USB-6008 to stay in the Nyquist limit.

  Lynn

• It's my first Siu of this system, so I want to make some friends from different countries, how do?

  Original title: help

  It's my first Siu of this system, so I want to make some friends from different countries, how do?

  Hi hangfenge,

  The purpose of these forums to answer is to help people having problems with their computers and the various products we cover here - it is not a place for personal conversations in order to make friends.

  To do this, I would say something like Facebook: http://www.facebook.com/ or among the multitude of alll chat rooms available on the web.  Here's a search that can help you find a: http://www.bing.com/search?q=chat%20rooms%20online&PQ=chat%20rooms&SP=2&QS=AS&SK=AS1&sc=8-10&form=BB07SS&pc=BB07.

  If you have problems with your computer or software, can find here appropriate forum and ask your question and someone will be happy to help you.

  I hope this helps.

  Good luck!

• I'm about to buy Resident Evil 5, the PC version and I want to make sure it will work on Windows 7.

  I'm about to buy Resident Evil 5, the PC version and I want to make sure it will work on Windows 7.

  Worked for me on Windows 7 64 bit Home Premium edition. Enjoy. This is a pretty decent game that I guess.

• Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Hello

  To bookmark this site.  He may have more information for you. Wikipedia

  Joining lengths of optical fiber is more complex than to join the electric wire or cable. The ends of the fibers must be carefully cleavedand then spliced, either mechanically or by merging with heat. Fiber optic connectors for removable connections are also available.

  Scroll to the termination and splicing

• I want to make a CD with the picture of my brother in the order of his life.

  My brother just died. I want to make a cd of photos of him in the order when he was a baby, and through his life. I have created a folder for this and entered the order the photos I wish, but as I put the pictures in, file fix them out of use. How to display in the order and also to go on the cd and to display in the order?

  It seems that this could be the right answer. The only question I have is that several times I tried to rename the files and a message came to say he could make my unstable file, so I've renamed never all., because I didn't want to spoil my pictures.

  In addition, can I keep the image names and add numbers before or after the title... I'll make the cd for other people to view, and it will cover a period of 70 years. I wish that people who consult to understand on what date, and perhaps where they were taken.

  Thank you for your information, I appreciate it

  =======================================================
  The dialog box that you received when you rename was probably something like...

  "If you change the file name extension may become unusable.

  "Are you sure you want to change it?

  This dialog box if you are unable to keep the file extension that indicates
  the format of the file. For example. JPG and even if rename you it with a.
  the extension you could replace it and the file would be nice.

  If you do not see the file extensions on your file names... you can go
  TO... Button start / Control Panel / folder Options / View tab and Clear
  (uncheck)..., the checkbox "Hide extensions of known file types" / apply / OK.

  If you have reservations about your photos, that it may be interesting to try
  create a copy of the file of the photo to experiment project. So if
  you are not happy with the result rename you can just delete it
  and while maintaining the current photo project folder.

  As for retaining the current file names. Yes, you can keep them if you
  numbers of the photos manually and place the first number. Do not close the
  file once you have manually converted files or they will come back
  for the original order. After that your numbering is done... they will remain in
  order.

  As follows:

  10001 dinner with friends.jpg
  10002 to the beach.jpg
  Picnic 10003 time.jpg
  10004 ocean waves.jpg

  Good luck...

• I want to make multiple copies of DVD but don't know how to copy it.

  Original title: copy of a dvd.

  I have a memorial dvd someone gave me. I want to make copies. the original dvd was burned on another pc. it it won't let me watch it.  don't know how to copy it.

  Hello

  Here's how to copy DVD and burn: (these steps will be useful if your DVD is capable of burning DVDs)

  a. right-click on the DVD drive icon, and select Explorer.

  b. Select all the files and right click on them. Now, select copy.

  c. now, go to the location where you want to paste. Right-click on the free space and select Paste.

  d. now, insert a new DVD.

  e. now open the DVD in Windows Explorer.

  f. copy all the files you want to burn and then right-click on the free space on the Windows DVD and select Paste.

  g. you must click on the "write these files to DVD" link in the upper left corner of the window.

  h. the Assistant burn a DVD appears and asks you to name the CD\DVD. Insert a name or leave the default and click Next.

  i. wait until the burning process is complete.

  If you receive a message during copy or burn DVD error then return the exact error message.