I want to recover my Equium L40 - PSL41E

Similar Questions

• Re: Wireless has stopped working on my Equium L40 (PSL41E)

  Hi guys.

  With the help of my laptop wireless this morning and all was fine, then all of a sudden, it loses the connection.

  Tried different methods to restore the link, update driver downloaded but no luck.

  The wireless light on the front of the laptop no longer turns, so I was wondering if there was some kind of internal problem.

  I am house bound and rely heavily on my WiFi, so if someone could suggest a solution to the problem, or has any suggestions, which would be excellent, but please keep in mind, I'm not very technical interest, you may have to explain things in detail!

  Thanks for your help.

  Karl

  Hello!

  You have activated the WiFi connection with the hardware switch of the laptop? The switch is on?
  In addition you can disable/enable the WLAN function with the FN keys. Therefore, you must press FN + F8.

  And what driver have you installed? If you update the driver, you should look on the Toshiba WLAN portal. There, you can always find new driver versions:
  http://APS2.toshiba-tro.de/WLAN/

  Good bye

• Equium L40 PSL41E: Wireless not connect host process not put end to

  Recently, I got a blue screen on this laptop crash after that get a message telling me a host process had ended.

  The computer is running Vista, so I expect problems when my parents bought my sister this laptop.
  In any case despite the frequent blue screen stop messages, etc.. When I get the message telling me that the host process put an end to my wireless connection gets messed up.

  The last time I used windows: diagnose why Windows cannot find network option and was quickly informed that my wireless was turned off (despite the fact that he was actually turned on) and that the computer would automatically turn back on.

  After that it worked fine for a few days until I had another stop of host process and the computer crashed once more.

  This time, the computer refuses to connect despite the use of the above method and the ConfigFree(Connectivity Doctor), fix the connection etc.

  I give myself the possible Solutions are:

  Check the communication device for bridged settings you may need to disable the bridge or reconfigure. a 15.

  It is certainly not the problem.

  a-9 Move closer to the wireless router.

  Even once is not the problem, I'm sitting next to.

  a-10 tour of all bluetooth devices or other devices that may interfere.

  There are no such devices near to.

  a-11 Check to check a microwave oven is not in use is close.

  It is not in use.

  a 13 make sure that the maximum number of devices connected to the access point is not exceeded.

  Well, it worked for 6 months before that, so I do not know is not the case.

  a 37 to ensure that filtering by mac address of the access point is configured correctly.

  I don't have any idea what it means. But my cell phone girlfriends works very well with the wireless connection.

  a 19 restart the router/access point

  Done several times.

  Well, good suggestions. Fire now that I'm all ears.

  Hello

  I put t know why a host process has stopped working, but to my knowledge, the process could be svchost.exe.
  However, the issue seems to be related to the Vista OS problem

  I see that you have tried to solve this problem, but without being successful, you also get a BSOD so I think it's a serious problem of software and you must first use the Toshiba Recovery CD to reinstall the operating system on this laptop.

  After the new installation (would take about 15 min) update the operating system to the State.
  Then you can try to reconfigure the wireless network

  It's worth to try ;)

• Equium L40-10 X PSL41E keeps freezing - where to find the BIOS?

  Hello

  I'm new to this forum so please, be gentle.

  I have a laptop Equium L40-10 X
  Model number PSL41E-004004AV
  Works on Vista 32 bit home

  My problem is it keeps freezing Ghent I can't do anything, but he re - start.

  The section of computer problem report tells me I must update the BIOS.
  I tried and tried on the Toshiba site to find/correct installation, but nothing helps.

  Can someone help me?

  Please

  Hello

  You can find the latest version of the BIOS on the Toshiba pilot European page because it is a European model Toshiba laptop.
  Please check this:
  http://EU.computers.Toshiba-Europe.com/-> support & download-> download drivers

  You will find the Equium L40 PSL41E

  Welcome them

• Equium L40-14i HD Enclosure

  I want to turn my Equium L40 - 14i HD in external HD. Should which kit pregnant I use?

  Hello

  You must use a drive enclosure HARD 2.5 SATA Equium L40 s supported HDD SATA and SATA HDD interface.

  Welcome them

• Need USB drivers for old Equium L40 - 10U PSL41E running Vista 32-bit

  Hi all

  I think that my USB driver is corrupted. I found the ChipSet, LAN and BIOS drivers for my old PSL41E Equium L40 - 10U running Vista 32 bit. However, I have not found the USB drives I need. USB drivers are contained in the ChipSet, BIOS or LAN driver?

  If not, where can I find and download the USB drivers for my old old Equium L40 - 10U PSL41E running Vista 32 bit?

  Thank you! -Le Cannet

  Here is where I found the drivers (but with no mention of USB drivers):
  [Drivers Equium L40 - 10U PSL41E | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 391 & selSeries = 326 & selProduct = 752 & selSho rtMod = 541 & language = 13 & selOS = 26 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true]

  > Are contained in the ChipSet, BIOS or LAN USB drivers driver?

  USB drivers are part of the Windows operating system.
  The USB ports should work after the installation of the Windows operating system and, therefore, there is no such thing as a USB driver for the USB 2.0 standard.

  In addition, the chipset driver must be installed.

  I checked the proposed link in your ad and here, you can download the Intel chipset utility.
  The update of the BIOS is also available

• Equium L40 - 10z PSL41E - cannot install audio driver WinXP

  Hello!

  I'm having a problem with the installation of the Windows XP sound card drivers

  Computer laptop informatio, Toshiba Equium L40 - 10z (bought from PC World) PSL41e
  2 GB Ram DDR2 - 667 Mhz
  Core 2 [email protected]
  120 GB hard drive
  Intel GMA 945 graphics card with shared memory

  I can't find drivers for my laptop, the specification is indicated above. I have windows XP with service pack 3 installed and the system is unable to install drivers Realtek High Defination or audio drivers Realtek AC 97 ". I even tried the latest drivers version 1.86 but not its use.

  I read the other posts on this forum and have tried the other model audio drivers as well, it seems that after running the installer from several other realtek audio drivers for windows XP THAT is of no use. I even tried to add material manually through the Device Manager and have to install these drivers for realtek high definition audio and the realtek ac 97 audio drivers.

  Of course, this helps the drivers to install, but windows cannot activate the material with an error code 10 with a note of explanation on behalf of the driver in Device Manager.

  I also tried to install the drivers of toshiba A100/A200 without exploitation, however, I read somewhere that there is a windows XP patch that is required to be installed, so that windows detect the chip high definition, which is on the motherboard. If one can provide a direct link to a driver with the .inf file that will have the information for the material, or if someone can advise (or provide a link for) according to microsoft update is required for windows XP, in the appropriate hardware detection, will be really useful.

  I'm also sorry for my bad English I'm unable to articulate with the type of problem, I faced. But if anyone knows of a solution and additional information is needed, I will be happy to provide you with everything I know.

  I'll be very grateful to anyone who helps address this issue. Looking forward to a positive response :).

  > have windows XP with service pack 3 installed
  To my knowledge, that the XP SP3 is not published official. Only a beta version is available.
  Then go back to SP2!

  > the system cannot install drivers Realtek High Defination or Realtek AC' 97 audio drivers
  Realtek AC 97 audio driver is not compatible! You must use the driver from Realtek High definition.

  > Of course, it helps the drivers to install, but windows cannot activate the material with an error code 10 with a note of explanation on behalf of the driver in Device Manager.

  The problem is that you have not installed the MS XP patches that are necessary to get the sound working.
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=59&ThreadId=25916

  You need the KB888111 and KB835221 hotfix

  Good luck

• How recover Equium L40-10 X?

  Hello

  I'm trying to reboot my computer to factory settings do not know how to do this I need a floppy or there at - it something built into the laptop.

  Any help much appreciated.

  I have an Equium L40-10 X.

  Thank you

  Very simple;

  -Insert the CD called recovery CD
  -Boot from CD/DVD drive
  -Follow the instructions on-screen ;)

  All that s. It of very simple!

  Just FYI; the installation of the recovery CD will erase the whole HARD drive. So eventually back up your data before using Recovery CD

• Authentication, when I want to download the driver for Equium L40

  I already registered my laptop for the warranty and I have a username and password, but it seems that I need to register on this spot where I am trying to download, and it's another page on which I have not found any record button. The driver pack that I speak it is a laptop Equium L40-10Z. Any ideas?

  Post edited by: mnemonic

  No panic dude... He looks like a Server driver problem.
  I read in this forum that some regular maintenance needs to be done.

  I recommend you to check the driver page in the coming days.

• Equium L40-10 X - hardware upgrade options

  Hi all, I hope someone can help me.

  I have a few problems that I wish to address with my laptop. The first is an overheating problem. Is there a cooling system that I can install to help with this problem?

  I know I can improve my RAM, I currently have only 1 GB, but I heard that I can have only a maximum of 2 GB. It is not a problem if that's true, but if I get more I would.

  Last thing I want to ask, is whether or not I can upgrade the internal memory, I currently have 120GB. If I is something I can do myself?

  I appreciate any help you can give

  Hey,.

  1 if you have overheating problems then just clean the cooling assembly. You need not just a new or better, cooler jet of compressed air. ;)
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  2. Yes, you can upgrade the RAM to 2 GB. That s the maximum capacity for this model to Toshiba specifications.
  The part number for a 1 GB module is PA3512U-1M1G

  3. you can also upgrade the HARD drive, that s no problem.
  AFAIK Equium L40 supports SATA already then you can buy each HARD drive with this interface. There is no capacity limit.

  I hope I could help you :)

• Updated BIOS for Equium L40

  Hello
  I have an Equium L40 x 10 with PSL41E model number. This update will work with it?:
  http://UK.computers.Toshiba-Europe.com/innovation/download_bios.jsp?service=UK

  He said he works with only with the numbers of model PSL40x, PSL41x or PSL43x, don't know if the x is a model number or designates any letter?
  Thank you.

  Out of curiosity: you have a serious problem with your laptop? I mean what is the reason for the update of the BIOS?

• Re: Equium L40 - Windows 7 and the wireless switch

  I upgraded my Equium L40 to Windows 7 and now, wireless equipment and F8 function switch switch the WLAN on and outside. It is permanently.

  Also, even if it is enabled in the Windows 7 power options, close the lid won't be thecomputer to sleep. If I close it turns off the screen but doen't make Windows 7 options.

  When I upgraded to Windows 7, I chose the option to do as a new installation and therefore lost my Vista installation.

  I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.

  Is there something else I need to do for the WLAN switch and cover works with Windows 7? Any help gratefully received.

  See you soon,.

  Ray D

  > I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.
  What L40 you exactly (L40 - xxx). I just want to check if your model of laptop is fully supported for Win7.

• Equium L40-10 X: need details on memory

  I think to upgrade the RAM on the above, but can't find the model or specification on the UK site (other members of the family range Equium are in the "Portable computers" section of the Web page, but my model is not frustrating!).

  I am particularly interested because I want to get the right type of memory (original or generic) - users can help me on this?
  My main reason for increase the RAM memory, is that the laptop seems desperately slow with 1 GB of ram standard which I think is mounted 2 x 512 MB.

  If all users have other tips to speed up the laptop, let me know.

  By the way, turning takes about 50-60 seconds and shutdwon 40-50 seconds, is this normal.
  The laptop is currently to form specifications with.

  Don t found the Equium L40 - 10 X but 10U.
  However, the two laptops are identical.

  According to [this | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=35780&ft=m&st=3] page, you can use DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM

  Greetings

• Equium L40 HDD sata drivers for Windows 7

  Equium L40 17 M (PLS49E) running XP... and I want to install Windows 7 and I need the disk drivers sata HARD turn...
  But I can not find these anywere... I tried the site driver Toshiba and other pilot sites.

  I had the same problem when I wanted to move from Vista to XP
  And found out that I just needed to add the driver for Sata HARD drive in the ISO I was
  I after trying Vista inside drivers

  Then someone knows that are Windows 7 disc sata (Storage Manager) HARD drivers
  or if I can use the Vista ones

  Thank you
  Joepeash

  Hello

  Normally, you can get all the drivers on the Toshiba page:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I checked the page, and it seems that for Windows 7 not all drivers available. So, as you've already written that you can try the Vista driver because most of them are also work on Windows 7.
  An alternative, you can consult the Intel page. Maybe you can find a newer driver that was official published for Windows 7.

  If you n t know how to use this driver exactly, use the forum search. You will find hundreds of threads. ;)

• Equium L40-156: graphics card problem - error code 12 in Device Manager

  People of the night...

  Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965).

  Tried the drivers that I had with the installer
  Tried the drivers from the toshiba download page
  Tried the drivers on the Microsoft Update site
  Tried the drivers from the website of intel

  All have the same problem, in Device Manager, it shows with an error (the pretty yellow triangle with the "!") with an error code 12 (the device cannot find enough free resources) even after a system resart.

  Switching view hidden devices displays a 2nd same device, but works correctly, but the two disappear if I try to delete either.
  Display settings do not display a connected device, DXDIAG had no idea either.

  Latest version of the BIOS installed, all other devices are very good and can not see an IO overlap anywhere

  Any suggestions, greatly appriciated

  Ta

  Hello

  I have studied a little bit and looked on the Microsoft page for some answers and found out what exactly means the error code 12.

  ------------------------------------
  + Error code 12 +.

  + This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) +.

  + Two devices are assigned the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller is not an interruption of the BIOS because of a corrupt MPS (Multiprocessor) system table). +
  -------------------------------------

  Well, what to say; usually this error message should not appear with the original Toshiba preinstalled operating system.
  I put t know if you have changed something or add an additional device, but it would be very interesting to know if the same error message appears after the reinstallation of the OS.
  You can use the Toshiba Recovery CD/DVD of restoration!

  All the drivers, the tools are already preinstalled on the recovery CD so the entire procedure will not take very long. about 10 min.

  Check this box and report if the same error is displayed on the laptop with the factory settings!

  Good bye