I watch and wifi

Similar Questions

• Apple Watch and pacemaker

  MY wife has a heart pacemaker fitted, will monitor the heart rate on the Apple Watch gives BPMonitor accurate a reading or it would be compromised because of the pacemaker interfearance?

  Hello

  Note that the important safety information in the current Apple Watch user's Guide include the following information:

  Device medical interference Apple Watch contains components and x-rays that emit electromagnetic fields. Apple Watch, some of the bands, the magnetic charge cable Apple Watch, the case of magnetic charge Apple Watch and the magnetic charging Dock Apple Watch contain magnets. These electromagnetic fields and magnets can interfere with defibrillators, heart pacemakers or other medical devices. Maintain a safe distance of separation between your medical device and Apple Watch, his tapes, magnetic charging cable Apple Watch, the case of magnetic charge Apple Watch and the magnetic charging Dock Apple Watch. Consult your doctor and the manufacturer of medical devices for information specific to your medical equipment. Stop using Apple Watch, his tapes, magnetic charging cable Apple Watch, the load magnetic Apple Watch and the magnetic charging Dock Apple Watch case if you suspect that they interfere with your pacemaker, defibrillator, or any other medical device.

  
  

  More information:

  https://help.Apple.com/watch/#/apdcf2ff54e9

• Unable to receive calls from Apple Watch, using WIFI AT & T calls, when the iPhone is turned on, turned off or in Airplane Mode.

  I work on this issue and wanted to involve the community.

  I have tests the functionality Apple Watch and have been unable to solve my problems with WIFI call. I use the AT & T and I am connect to the strip of the 5 GHz on my router Xfinity.

  I am able to make/receive calls from my iPad and Mac laptop when iPhone is off / Mode plane; However, this feature does not work on the watch. I can make and receive calls from the watch when the phone is turned on.

  Another problem is that I am not able to send and receive messages (blue or green bubble) of the watch - once again when the phone is turned off or in flight Mode

  I'll copy in 2 portions of the Web site: http://help.apple.com/watch/

  http://help.Apple.com/watch/#/apd0443fb403

  If your Apple Watch is in range of a Wi - Fi network that the iPhone is connected to before, you can always do the following (even if the iPhone is off):

  • Send and receive digital messages Touch
  • Send and receive messages using Messages
  • Make and receive phone calls (if you have active calls, Wi - Fi, and you are within range of a Wi - Fi connected to your iPhone before)
  • Check current weather conditions
  • Track your inventory

  http://help.Apple.com/watch/#/apd2fe746e86

  Make calls via Wi - Fi

  If your cellular operator offers Wi - Fi calls, you can use Apple Watch to make and receive calls over Wi - Fi instead of cellular network - even when your pair iPhone isn't with you or is disabled. Apple Watch comes to be in range of a Wi - Fi network that is connected to your iPhone in the past.

  To see if your carrier offers Wi - Fi calls, see the article Apple Support phone with Wi-Fi calls, then enable the calls on your iPhone and Apple Watch Wi - Fi.

  Note: You can make emergency calls via Wi - Fi, but when possible, use rather iPhone over a cellular connection - your location information will be more specific.

  Enable on iPhone Wi - Fi calls. On iPhone, go to settings > phone and turn on Wi - Fi calling and application to other devices.

  Enable calls on Apple Watch Wi - Fi. Open the Apple Watch app on iPhone, tap My Watch, tap phone, then turn on Wi - Fi calls. If you do not see the parameter, make sure that you have activated calls on iPhone Wi - Fi.

  Answer please if you are able to perform any of these functions! And any troubleshooting you can think!

  AspiringAppleGuru wrote:

  I have... to connect to the 5 GHz on my... router bandwidth.

  Hello

  These features are not available because Apple Watch cannot connect to a network of GHz Wi - Fi 5.

  If your watch is not connected to your iPhone via Bluetooth, but lying in a 2.4 GHz Wi - Fi network your iPhone plugged in before, the watch can connect to this network and you can continue to use certain features, including Wi - Fi calls (when it is supported by your operator, you already have in place).

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

  Use Apple Watch without her sister iPhone - Apple Support

• I rented a movie and I can not watch and has already been charged

  I rented a movie and I can not watch and has already been charged

  Expect to be charged when you choose to rent, not some time later. Why can not watch you? Error messages? What version of Apple TV do you have? See if anything in this collection of Apple TV support documents and user guides help.

  TT2

• When I turn off my Apple Watch and then turn it on, the face of the watch I changed other randomly

  Every night I turn off the Apple Watch and the next morning turn it on. Recently it chages the Apple face a random and erase one had. I have restore the

  Hello

  If you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
  • Update the software on your Apple Watch - Apple Support

  Rather than spend your watch every night, you can find more convenient to charge your watch every night, from one day to the next.

  The watch cannot be overcharged, and the battery won't suffer harm of regular refills done every day. The load will automatically stop when the battery is fully charged and will start again if necessary due to the use of the current battery.

  Follow Apple's safety and handling instructions, and note also that:

  • It is not possible to turn the watch off the coast while it is on the charger and connected to the power supply - what is normal.
  • It is also normal to watch, adapter sector and charger become hot when it is connected to the power.

  More information:

  Check your battery and load your Apple Watch - Apple Support

  Keep Apple Watch in acceptable operating temperatures - Apple Support

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• I just bought a Apple Watch and thought that I entered the same password as my iPhone. Apparently I did not, and now my watch is locked. Help

  I just bought a Apple Watch. Thought that I entered the same password as my iPhone. Apparently I don't have. Watch is now locked. Help

  Hi Rich

  Follow these steps to clear your locked watch and re-pair it with your iPhone:

  • Connect your watch to its charging cable - with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press Power Off (don't try to drag - just press more firmly than a normal tap), then press erase content and settings.
  • Then re-pair your watch by using the app shows on your iPhone, choose restore backup when the possibility.

  More information:

  Set up your Apple Watch - Apple Support

  If you have forgotten the password for your Apple Watch - Apple Support

• How can I watch and download videos like youtube flash videos if flash player can't stand not for mobile phones using the android version 4.0?

  My mobile android version is 4.1.2. At the present time, I can't watch and download videos from youtube. If flash player does not support any mobile by using the version of android more 4.0, how can I watch and download these flash videos?

  You can always download and install Flash for Android 4.0 which still works on android versions greater than 4.0, which is located on this site (http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html), which is the own adobe site. Look for the Flash for Android 4.0 and the latest version. Although it is not advisable to use an outdated version of flash as it is not secure.

• I have SE phone BT and WiFi problems

  2 questions

  Voice of BT in car quality is terrible with the phone SE - not like that on old 6s I sold to buy this phone.

  Just noticed that the WIFI icon has disappeared!  Despite the detection network WIFI with excellent signal strength and network selected checked the actual signal is not there - it is always in the upper left corner of any I phone that I had previousdly not there now!  I think that it is connected OK as connection is faster than the 3G or 4 G-

  Someone at - it an idea of what is the problem and how to sort for BT and WIFI?

  Please do the following and after each test to see if the problem is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

  For Bluetooth

  1. If the pencil of Apple is connected - "Forget it" and try again
  2. Control Center - tap bluetooth and turn it on again - 8 - 10 times
  3. Force restart the iPhone
  4. Update to the latest iOS if not done

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• update of Apple Watch and matching, how long is this take to os 2.2

  update of Apple Watch and matching, how long is this take to os 2.2

  Hello

  If the update process seems to have stalled, try the following steps, which can help to solve the problems at the latest to step "review".

  However, do not interrupt your iPhone or your watch if the process has already reached the stage of 'installation' (as reported by the watch app):

  • On your iPhone, close the watch application and all open applications:
    • Double-click the Home button, and then drag upward on each preview of the app.
  • Remove the magazine from your watch and restart both devices:
    • The two put together, and then restart your iPhone first.
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
    • To reactivate: press and hold the side button until you see the Apple logo.
  • Replace your watch on the charger, keep your iPhone connected to the power supply and try to update again by following the instructions here:
    • Update the software on your Apple Watch - Apple Support

• I reset my Apple Watch and I can no longer use it, whenever I press the power button, it gives me the sign of loading

  I reset my Apple Watch and I can no longer use it, whenever I press the power button, it gives me the sign of loading

  Hello

  Try restarting your watch force: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo.

• How can I get my account number of the device Apple Watch and iPhone 5?

  How can I get my account number of the device Apple Watch and iPhone 5?

  Try this below - it can help you!

  In the Apple Watch app on the iPhone, under My Watch > booklet & Apple pay > [your specific credit card]

• Apple Watch and health kit synchronization

  I have a question about the Apple Watch and the integration of health kit.   I searched and found a little info, but would like some clarification.   I've got a grant of Q of fossils.  It syncs health kit and measures steps etc. through its application.  I recently added a Apple Watch.  I don't want to wear it to work every day and bang stainless steel to the top, so I wear the Q.  Now when I go home and change show for the night.  Activity tracker shows no steps/calories burned.   I don't see no matter what setting do these two speeches, and as they are both natives apps shouldn't they sync?  Am I missing something?

  Thanks for the help in advance.

  Jeremy

  Hi Jeremy

  The health on the iPhone app does not synchronize the activity to the activity on Apple Watch application.

  Instead, the Heath app on your iPhone brings together data from health and fitness of Apple Watch, iPhone and other sources of data. Combined data is reflected in the application of health dashboard, which adjusts the results to avoid any double counting of data from different sources.

  More information:

  http://www.Apple.com/watch/health-and-fitness/

  Use the activity on your Apple Watch - Apple Support

• DV6 - 2173cl: what the drivers of network adapter for LAN and WiFi for HP dv6 - 2173cl

  Hello

  I have reinstall my drivers for the computer hp laptop dv6 - 2173cl.  This laptop has LAN and WiFi cards.  I looked at the driver for this model and I see that for drivers WIFI HP has:
  Available drivers Atheros and Broadcom.

  I let Windows Update and it installed an Intel WiFi Link driver which is not yet on the Internet HP site.  I have

  Do I need to install Atheros or Boardcom WiFi driver for this model?    I'm afraid that, perhaps, the Intel driver is a generic driver that makes the card works but is not optimizing his performance as do dedicated pilots.

  How do I know what brand for the wifi card I have?

  Thank you

  You are the very welcome.

  You need the JMicron card reader driver for your model.

  You don't need the driver of Intel Matrix Storage manager.

  The Intel matrix storage driver manager is used for disk raid configurations.

  I couldn't find a W7 driver for your Intel card.  The site is down or they can't stand any more of the map.

  It states right they do not provide phone, chat or emal support for this card.

  So here is the latest driver I could find at HP.

  If it is newer that what update of windows installed, then you can install it.

  15.0 (February 14, 2012)

  FTP://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56162.exe