iCloud account will not end check

Similar Questions

• The song will not end before it passes to the next song

  I have the first generation iPad Pro with the latest IOS 10.0.2.  Since I've upgraded to the latest iOS, I had a problem with playing music from my playlist.  The problem is this: when I play music using the shuffle, some songs will be will not end before jumping to the next song.  If I use repetition, it seems to work ok, but will only go through the playlist once and I have to restart.  So, I prefer the shuffle.  I tried pointing out both mix and repeat (Yes, they both remain highlighted) but I have the same thing.  It began with the last updated with iOS.  Is there a setting somewhere... ?  I'm doing something wrong...?  Any help would be greatly appreciated that it becomes boring.

  Thank you for any assistance.

  I had a few problems strange playlist music apple since ios 10.

  They all seemed solved for me by disabling the library icloud music on my ios devices, turn off the music apple in the music settings, then reactivation everything and leave. Don't worry not all the playlists and albums etc will be there even when you reactivate library icloud.

  Unfortunately, it removes your music the device offline, but as long as you don't mind the download again it should hopefully sort your problems

• My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do?

  My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do? I previously used the same connection to my account for a long time without any problem. My PC I have a tie with Windows 8

  < personal information deleted by host >

  Hi bengtfrombelgentier,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are experiencing these problems access iCloud. If you are unable to access iCloud.com due to an error of supported browser, you can check the browser requirements set out in the following article:

  Requirements for iCloud - Apple Support

  Concerning

• If I use different, the same computer, but an iCloud account will be my projects get lost?

  If I use different, the same computer, but an iCloud account will be my projects get lost? I downloaded the trial version to my friend with her iCloud computer and now it is expired and my project was not yet ready. If I connect with my iCloud on my friend's computer and buy FCPX, my project will be there? And if not, if I buy the program with my friend iCloud account, is it possible I could move my computer later? I would not buy an app €300 just for my friend...

  LLA libraries are separate from the application. That you have subscribed to the trial is quite distinct from what you use to connect to the purchase. However, once you bought with an Apple ID it is that you always have to sign in with to receive updates. The application and the Barrie similar don't really care what you signed in in iCloud.

• my guest account will not open many programs

  original title: Guest my account

  my guest account will not open more than one program. He cannot find them or wonder what to open it with. It will either Web for an appropriate program search. Everything works very well in the admin. account. I created a new account and everything works well in it. What could be wrong?

  Hi jfnlsn,

  If it helps, try the step below and check out them.

  First log on as an administrator.

  Go to start > Control Panel > user accounts. Disable the guest account. Go to start > right click on my computer > in system properties go to Advanced tab > user profiles > click Settings > highlight guest account > click Delete > click OK.

  Close System Properties. Back to start > Control Panel > user accounts turn guest on account. Log off as administrator, and then log on as a guest, check to see if it helps.

• On my old e-mail account I could insert a list of addresses by putting the list name in the to: my new email account will not accept the list names. How can I fix th

  My old Thunderbird e-mail account has been with Time Warner,
  SC. RR.com. my new second account) is with AT & T, ATT.net.

  In my old account I could give a name to a list of multiple e-mail accounts, put the name of lists at the BBC: and send email to everyone on the list.
  My new account will not accept the name of a list. He insists on the format of a single e-mail account. I tried to create a new list after closing the old account and open the new one, but the results were the same.

  How to make 'list' to work on my new ATT account?

  I'm glad to hear that your problem has been resolved, please select the answer that solved the problem. This will help other users with similar problems more easily find the solution.

  Please contact the Mozilla Support!

• Smartphones Yahoo blackBerry email account will not delete

  My Yahoo email account will not erase.   I wanted to delete my Yahoo account on my 9780 and entered the installer to remove.  It no longer displays as an account listed in the Setup menu, but it still appears as an icon on the home page.  It is always active, retrieving messages.  I tried rebooting by removing the battery nothing works. Any help much appreciated.

  Go to Blackberry Internet Service account and delete it. Then go into the Service books and delete the one for this email address.

• The Task Manager will not end task?

  Try to download a pc of a CD-ROM game, he doesn't answer so I went into the Task Manager to end the task.  However, now Manager tasks will not end task.  How what?

  Right-click on the task in the Task Manager, and then click go to process

  Select this process, and then click on end process

• Enable Performance Monitoring will not be checked in CF8

  The checkbox to activate the performance tab in my CF8 install debugging options will not be checked. When I try to use the performance monitor to monitor CF8 it does not work. Any ideas?

  CFSTAT is not this problem, I have problems with that. This is the performance monitor. I posted this same thread in another region. It turns out that this is a bug and Adobe created 70537 for this bug. See this other post.

  http://www.Adobe.com/cfusion/webforums/Forum/MessageView.cfm?CATID=3&ThreadId=1303184&foru mi = 1

• Shortcut keyboard Toshiba Satellite Pro L300 - properties will not end

  Dear lovers of Toshiba:

  This week, we have installed three new systems of Toshiba Satellite Pro L300 (two L300-153, a L300-156) with recovery media for Windows XP since the L300-156 product (no date on the disc, only two codes: CD 5 124624 and GMR400841EN0).

  The machines are beautiful and very effective, except for one problem: when the logout or shutdown Windows XP, the program called 'The Toshiba keyboard shortcut properties' does not stop automatically and opens a dialog "end program". The user may terminate the program immediately by clicking on the button 'End now' or wait until it to expire, after which the system disconnects or terminate normally.

  We noticed only after the installation of Service Pack 3 on all machines, so I don't know if the problem was present before SP3 has been applied. (We will be definitely check this on the following system and display the result.) Install the rest updates Windows with Service Pack 3 does not resolve the problem. Not more then that uninstall Toshiba Hotkey Utility by installing the package current, freshly downloaded from the Toshiba support area.

  A colleague suggested disabling startup programs. There are two likely choices for this purpose in the startup list + of + msconfig +: * thotkey * and * TFncKy *. Disabling either of these programs allows the disappearance of problem, but the functions of the * Fn keys are lost. The key functions are also lost when uninstalling the Toshiba Hotkey Utility.

  My question is of two parts:
  # Comment this problem be solved permanently, or circumvented (other than to say the customer never disconnect & close always the cover to hibernate)?
  # If there is no solution yet, how can a bug report situate with Toshiba, so I can get them the information they need to solve this problem and establish the responsibility?
  I will continue to post new information here that I acquire until a permanent solution is reached.

  Although this problem seems trivial and 'cosmetic' it's always awkward having to provide new machines customers with such an obvious flaw. It ourselves and Toshiba look bad, especially after that we sold the idea that people avoid problems of this kind to choose a Windows XP on Vista platform.

  Thank you, Robert Phair
  Director.

  > when the logout or shutdown Windows XP, the program called 'The Toshiba keyboard shortcut properties' does not stop automatically and opens a dialog "end program"...
  > We noticed only after the installation of Service Pack 3 on all machines, so I don't know if the problem was present before SP3 has been applied

  Problems could be caused by Win XP SP3. I've read several times that SP3 could be not entirely compatible with drivers or 3rd tools
  So I guess there is a problem of compatibility between the exe and SP3 files.
  By the way; SP3 is not completely released and updated test!

  I installed SP3 for some tests on my old non-Toshiba laptop and my work LAN card didn't so it of really possible that SP3 causes this.

  > There are two likely choices for this in the msconfig startup list: thotkey and TFncKy. Disabling either of these programs, the disappearance of the problem, but the functions of the Fn keys are lost

  It is clear that the thotkey and TFncKy files belong to applications that control the FN keys, SO if you would disable this in msconfig then buttons would not work.

  So, a solution might be a removal of SP3 System.
  In addition, you should try to clean the registry and operating system using the free tool like CCleaner.

  > Hope to get a response from an engineer from Toshiba, if there is no monitoring of this forum.
  I hope this too, but it seems that this forum is only a user forum.
  So if you want to report this behavior for laptop, contact the Toshiba ASP in your country

  See you soon

• Windows Mail will not automatically check new email and download.

  I have Windows Mail and put it in place to check for new messages every 10 minutes - but it does not automatically download all emails.  I have to do it manually and when I click the icon send/receive, it will not download my mail - said errors occurred, but does not list errors.  I have to use the menu drop-down and click on receive all or send all the, and the downloads of my mail. What's wrong??

  Under accounts, I have an email ACCT - pop.windstream .net, two new Accts - Microsoft Communities, and to the title of the Directory Service, there are two accounts each NULL of Active Directory and the Directory Service Internet Verisign.  Are these multiple Accts screwing things up?  They are similar, but do not know if they are, so do not know if it's okay to remove duplicates.

  Help, please!

  Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• New user account will not identify you. Error Msg: "the user profile service has no logon. Already tried the registry option (list of profile edition)

  Hi guys,.

  (I already tried this https://support.microsoft.com/en-us/kb/947215)

  I have usually need two accounts on my system. I lent my laptop to a friend for a few hours and asked him to connect with the guest account but he got "the user profile service has no logon. User profile could not be loaded"error message. So I tried to create new accounts (standard and administrator), but nothing works. I am able to connect to my account but not to other accounts, I have create on my system. Pls help

  OS: Windows 7 Home Premium

  Hello Shashank,

  Thanks for posting your query on the Microsoft Community.

  I imagine the inconvenience that you are experiencing and I appreciate your efforts taken to solve the problem.

  I suggest you refer to the suggestion of Nithyananda J replied on February 15, 2010 and check if that helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-7-Administrator-logon-failed-user-profile/04652778-1646-4bc9-9f5f-1c20273af15b

   

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you

• RIM-COD-SHA1 value to the jad file will not be checked during the on air download

  Hi, expert,

  I'm trying to see if the 2 following properties espeically the sha1 either activated or not during the over-the-air download of my aplication:

  RIM-COD-SHA1: 8 b 11 58 and 6 d 94 ee 4 c 94 27 09 57 95 1 b 1 c 80 2 b 45 38 f8 f7
  RIM-COD-size: 68020

  So I modified the value of sha1 of my jad file, to my surprise, actually the download will not check it at all and download was successful.  Actually the RIM-COD-size value is not matching the actual size of the cod file so. I suppose it could be due to some extra bytes added by signing. It is perhaps because of the same reason do not check the sha1 as well.

  But with all this, how BONES would be able to check the consistency between the JAD file and cod in case a COD file is corrupted? From my reading on the web, the sha1 is checked which is different from what I've seen during my obvious tests.

  Moreover, for on the airflow, after the signing, in fact we still use a single COD file that is in the results expected/standard eclipse folder (there is also one of expected/web results, but we don't use it) and then we rename the file .zip and extra cod all these cod file the zip and put all these cod and jad file on our server.

  I'm doing sth wrong here?

  Signatures added at the end of a COD file are not included when calculating the value of SHA1.  It is expected that the SHA1 of the JAD file values remain the same after the signing.

• Initial backup, Time Capsule will not end.

  I recently started to use my Time Capsule to back up my early 2014 MBA 13 '' again. However the initial backup will never end. The TC is not used as a Wi - Fi router; It is connected to the existing wireless network.

  When I started having this problem initially. I erased the disc TC and more fresh and Time Machine, under System Prefs, told me that the backup has been chugging along just great. Well... now, after he had all of August to reach the end of time Machine always shows me "waiting for full first backup."

  If I choose "save now" widget menu bar or if I let the system restart automatically backups TM shows Control Panel "backup x of x, XX, XX" and the second number continues to increase. The backup will never end.

  I searched the Ko of Apple and these discussion forums and not found the answer. What can I do to make this backup finish?

  TIA.

  The TC is not used as a Wi - Fi router; It is connected to the existing wireless network.

  And that's probably the problem, because Apple does not officially support backups Time Machine to TB unless you use the wireless TC, or connect the Mac directly on the TC using a wired Ethernet cable connection.

  Things can work with your existing wireless network, but it will be no help if it is not. Sometimes in situations like this, a Mac will back up OK wireless, and another Mac will have problems.

  As you try to add 'new' backups 'old' backup, Time Machine can also have issues with this, try to compare the old and new files and get confused about what to keep and do not keep. In this case, the recommended solution would be to delete older backups of the MBA and then start again and try a new backup.

  Wireless is never recommended for a first full backup. It's OK to use it, then much smaller incremental backups.

  If you try this course the existing wireless you have and still have questions, other than to try to save on the wireless TC, on the only other option to try would be to connect the MBA directly to one of the LAN port <>- on the back of the TC using an Ethernet cable.  Since you have an MBA, who does not have an Ethernet port, you can buy a bolt of lightning for the Ethernet card.  Maid in Gigabit Ethernet Adapter - Apple

• New iPhone 6 - iCloud backup will not restore

  6/64 GB iOS 9.3.2 iPhone.

  I just got a new iPhone 6 (iPhone previous 6a stopped working). My last backup was August 9, 2016, and I am sure that my old phone was using iOS 9.3.3 at about 99% backup time. They replaced the screen and my phone no longer works, so they ordered another who uses iOS 9.3.2. I tried to restore my backup, but I just get an error saying that it restore (no details). I suspect that this is because the software on my new phone isn't the most recent deployment, 9.3.4. If I upgrade the software on this new phone to 9.3.4, will be my (9.3.3) mosty likely to restore backup? I guess it boils down to this: a phone with older software can restore a backup that was created with the latest software of the iCloud?

  Can't say if it will be or will not be successful but you need to update the software on the new phone before you attempt a restore. You cannot restore a phone with the latest software, the phone restore you to the needs of the same software or later.