iCloud says that he does not have enough available space

Similar Questions

• Message that I do not have enough storage space for photos and videos that I do

  I received a message on my 6s + that I didn't have enough storage, although I do. Please see attached screenshot. Means that the pictures and videos on my iPhone are not available versions of the highest quality? I want to transfer some out of Capture of picture if I want to make sure that they are the best quality available.

  Thank you.

  It will be (if you press "Optimize phone Storage") No. otherwise.

• It seems that I got some kind of virus that wiped out my registery because files that whenever I try to run a program an error pops up saying that it does not have the specified path.

  pretty much my title says it all, I can not install anything, I get the same error, the only thing I can do is to get online. is there a way to restore my files online tracking, I have not my installation disc either. is there a way to remove viruses, malware, etc. online because everything I download and try to install I get the same error

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I am trying to download ITunes and an error came not to continue the download and say that it does not have the Windows logo test

  I am running XP and have never had a problem of downloading something before

  Hi Holly2750,

  · What is the version of Internet explorer, that you have installed on your computer?

  · This error occurs only when downloading ITunes?

  · From which site you want to download ITunes?

  · What version of ITunes you have installed?

  Until give you the above information, you can follow the steps in the link below: you cannot install some programs or updates: http://support.microsoft.com/kb/822798

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I just got a Toshiba laptop reconfigured with WEBCAM and Windows Vista. When I logged on Skype, it says that it does not recognize any webcam. How can I activate my?

  My laptop has a webcam, but Skype says that he does not have a webcam. It is disabled, and if so, how to enable it?

  Hello

  Close all programs and Skype.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Just you'd go to Toshiba Support and get the driver for your model laptop.

  Go to your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Good time to get some other updates here.

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

  Original title: problem e mail

  I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

  Suggestions;

  1. make sure that your e-mail program is your default program.

  2. make sure that your Internet Explorer, or your main browser has all its faults.

  You can do both of the above by following these steps...

  Start button > right column, click default programs > click Set Your Default programs...

  1. click on your e-mail program > it doesn't say "this program has all its defaults"?
  If not, click on choose by default for this program > check all boxes below the list > click on save when finished.

  2 do the same as above for your Internet Explorer, or your main browser.

• How to create a guest account? I followed the instructions and it says that it does not recognize the user!

  I followed the instructions to create a guest account and it says that it does not recognize the user's address or the password.

  Hello

  1. What is the operating system installed on the computer?

  2. are you trying to create or attempt to activate the guest account?

  3. How have you tried to create the guest account?

  4. What is the exact error you get when you try to create the guest account?

  Perform the steps in the articles to create a guest account and check if the problem is solved or not.

  Turn the guest account on or off (Windows 7)

  Turn the guest account on or off (Windows Vista)

  Hope that helps.

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Can we use Office default memory offline if the customer does not have enough free memory?

  Can we use Office default memory offline if the customer does not have enough free memory?

  Yes. We can use the parameter offlineDesktopDefaultMemoryScaleupValue jointly with the offlineDesktopReportedHostMemoryValue parameter in the registry.

  For example, if your client system has 2 GB of memory and the desktop view is configured to require 2 GB of memory, you won't be able to check the desktop view because low memory is also necessary for visualization of hosted customer.

  Use the parameter DesktopReportedHostMemoryValue = 2048 registry offline, so that you can go to the desktop and use the registry parameter offlineDesktopDefaultMemoryScaleupValue = 1024.

  so that the desktop view uses only 1 GB of memory when run locally.

  Reg patch: HKCU\Software\VMware, Inc. \VMware VDM\Client\disableOfflineDesktopMemoryScaleup

  Note: If it's a small environment you can do manual. Or we can simplify this activity by creating a group policy.

• I have an iMac 27 inch mid-2010 and a game I play is to say that I did not have a sufficient graphics card.

  I have an iMac 27 inch mid-2010 and a game I play is to say that I did not have a sufficient graphics card. Is there a way to improve or update my graphics card? I currently have an ATI Radeon HD 5670 512 MB. Any help would be appreciated! I'm also running on OS X El Capitan.

  You can't pass the GPU. Make sure you check the game system requirements to make sure that they will work on your model.

• When I use Windows Maovie Maker, the program keeps freezing upwards and says that it does not.

  When I use Windows Maovie Maker, the program keeps freezing upwards and says that it does not. I close and try again, but get the same question. in the past, I used this program very well without any problem. Now I do one or two things in the tyring program to create a video and it freezes. Any suggestions how I can fix this problem?

  The three main causes of problems of Movie Maker are:

  (1) incompatible or damaged source files.
  (Photos / videos / Audio clips)

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  (2) problems with video filters

  Open Movie Maker and go... Tools / Options /.
  Compatibility tab and disable all filters / OK.

  If this does not help, try going back to the same
  location and on the left, click on the 'all the default settings.
  button. / OK.

  (3) too large or complex project

  Create small projects.
  Add less Transitions, effects, etc...

• I get a message that says that I do not have access and enter an administrators password

  I have a desktop HP running windows XP.  I get a message that says that I do not have access and enter an administrators password.  I am trying to download a virus software.  I noticed that the security of the window manager warned that no virus software has been found.  It doesn't let me do.  I own the computer how do?  Are there real ideas that will actually work so I can get control of my computer?

  * original title - cannot control my computer.  Don't know password * administrator

  Hello

  1. have you logged as administrator?

  2. how many user accounts you created on the system?

  Follow these steps and check if that helps:

  Method 1:
  I suggest you try to scan online antivirus in your computer and check if it helps:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  Method 3:
  Try creating a new user account and check:
  http://support.Microsoft.com/kb/279783

  It will be useful.

• I have an Apple Mac computer (about 2 years) and on many occasions I tried to install Service Pack 3 and every time it does not have enough space whne the system has a large empty space

  I have an Apple Mac computer (about 2 years) and on many occasions I tried to install Service Pack 3 and every time it does not have enough space whne the system has a large empty space

  Error message when you try to install XP Service Pack 3 on some Intel processor Apple computers, 'more space':

  http://support.Microsoft.com/kb/950716 MS - MVP - Elephant Boy computers - don't panic!

• I tried to roll back the last update of lightroom, but it says that it does not apply to me.  How to bring back the old version?

  I tried to roll back the last update of lightroom, but it says that it does not apply to me.  How to bring back the old version?

  Hi cherry_boy,

  6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available

  Concerning

  Pete

• My DVD will play. My DVD says disc is bad or needs to be formatted when I try to burn. Backup stops and says back up does not have all the

  I want to backup my computer to an external hard drive but the popup of backup does not have this option.

  Hi Janice,.

  (a) have you tried using different DVD to burn backup files and check if it burns?

  (b) your use of any third-party burning software on the computer?

  (c) what is the size of the backup files that you try to burn on DVD?

  (d) you are able to burn CD/DVD in Windows Explorer?

  (e) you are able to perform the backup to internal hard drive? You cannot save to the C: drive, try to perform the backup on a different partition and check.

  Try to uninstall the burning of third-party of the computer software and check. Also try using different DVD to back up files. I suggest you follow these methods and see if it helps:

  Method 1: run this Microsoft fixit tool:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  Navigate to the following location and delete all the files and then try to burn the DVD and check if it helps:

  C:\Users\(User Name) \AppData\Local\Microsoft\Windows\Burn\Temporary file Burn

  You can see this Microsoft article and check if it helps:

  http://Windows.Microsoft.com/en-in/Windows-Vista/change-where-you-back-up-your-files

  http://Windows.Microsoft.com/en-in/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-in/Windows-Vista/which-CD-or-DVD-format-should-i-use

  Hope this helps, if you need help on Windows or the problem persists, please let us know we will be happy to help you.