Icon Strom - plug?

Similar Questions

• Qosmio F55-Q502 - charging icon says: plugged in, not charging

  I recently had my Qosmio F55-Q502 repaired by Toshiba.
  Two issues have been addressed, and one is fixed.

  However, the second attempted to decide without success.

  When I try to play multimedia games such as call of duty IV, even if the system is completely loaded, a few minutes the system will begin flashing the "Backlight" and then when I see the loading icon, he says: "plugged in, not charging.»

  This really worries me because I read online many similar questions, but none of the solutions seem to work.
  Having to reboot every time that happens and your in the middle of a game, really STINKS!
  I even had what is happening with SimCity4 which is an old game.

  Any suggestions on this good?
  Did they replace the battery when it was sent to which seems to be what most needs to be done.

  Hello

  If your Qosmio laptop was being repaired, I think that you should not discuss any issue on the forums, but put a pressure on the service and specify every single problem with your laptop.
  Please do because the warranty is still valid and it is now time to clarify everything.

  I am not an expert in hardware, but it sounds to me like some electronic power supply question but I can't say for sure. Speak with the service. Try to clarify this with them. Be nice, be cool and all will be ok.

• PC HP ENVY 15 x 360: battery icon reads "plugged in, not charging" and battery led flashes white

  My battery is empty and does not load.  I plug in the power cord to opperate the computer but the battery won't charge.  Icon is reading "plugged in, not charging" and battery LED light on the side of the computer is flashing white, even if the laptop is turned off.

  I checked the adapter cord and battery test that came back "ok".

  Is it my laptop stop working once I have run out of battery even with the adapter cord?  How can I fix the battery?

  Thank you

  Annie.

  Your battery part number is 761230-005.

  http://www.eBay.com/ITM/new-HP-envy-x360-15-u011dx-OEM-battery-NP03XL-11-4V-43-WH-761230-005-HSTNN-LB6L-/252397437204?hash=item3ac40f4114:gb8AAOSwvgdW3zEs

  REO

• Laptop computer charger plugged in but not charging

  Hello

  I bought a computer laptop hp pavilion dv6-6154tx laptop computer last month.my, developed a particular problem. When I connect my charger to it, it starts to load, but after a while it stops and the battery icon shows "plugged in, not charging". Then after awhile it again starts.

  Sudroid.co.cc

  There is a BIOS update available that is specifically for the intermittent support question. I recommend you to install.

• HP ENVY 17 Notebook PC: Plugged not supported message when plugged AC

  When my HP ENVY 17 Notebook PC is connected, it is is no longer in charge, and the battery icon says "plugged in, not load."  I ran a best of battery using HP Support, and the message says "battery reports a failure and should be replaced as soon as possible... ».  My laptop is less than 3 months.

  This means that the subsystem of loading of the motherboard is ok.

  Had considered running a recovery to see if it would solve the issue?

  I would try that before you send it.

  Beforeyou send in warranty repair, you must really have everything you don't want stored on an external drive anyway.

• Lenovo G50-70 plugged but not supported on windows 10

  I upgraded my lenovo G 50-70 to 10 Windows. I encountered a problem, power laptop computer watch icon is plugged in, does not support. I couldn't find the drivers of energy management for windows 10 on support/download page. Help me solve the problem.

  Link to photo/image

  Mod comment: Over size photo converted to establish a link. Please visit About-Posting-Pictures-In-The-Forums

  Thak in charge you for taking.

  In fact, he worked with the bios update.

• HP 8440p: HP 8440p "plugged in, not charging".

  I bought a hp laptop 8440p last month.my laptop developed a particular problem. When I connect my charger to it, it starts to load, but after a while it stops and the battery icon shows "plugged in, not charging". Then after some time starts again...

  Please help me...

  HHello,

  Do the steps below, this should solve the problem,

  1. in the Device Manager--> uninstall the method of compliance to Microsoft them both one by one.

  2. make an update of the bios and chipset update

  restart the device

  If this doesn't solve then drain the battery completely and charge the battery

• Plugged in, load, but will not pass 70%

  Mine is an Inspiron 14z, under windows 7 ultimate. The last 2 days my battery charge up to 70%, then it there just stay although the icon shows "plugged in, load»

  I've tried a few things:

  Disconnect plug

  -Remove the battery, put.

  -Uninstall / install compatible ACPI Microsoft control battery method

  -Restore to point before it works.

  Hi fantome1721,

  The reason why your battery would remain up to 70% and no additional costs might be an option called "Desktop Mode", which could be activated. Fashion Office contributes by disabling the battery to charge up to 100% to maximize the life of the battery. This option can also be turned off. To disable this option:

  • Right click on the battery icon in the Windows notification area and then click on Options of Dell Extended Battery life
  • Battery meter, dialog box appears, click the desktop Mode
  • Select the option to disable this feature
  • Then, click OK

  To learn more about office and longevity Mode Mode please use the link below:

  http://FTP.Dell.com/manuals/common/Vostro-3360_Setup%20Guide_en-us.PDF
  I hope this helps.

• "Plugged in, not charging", but have a blue battery light

  I have a gateway NV54 as tracks of Win 7 64 bit. I recently had my battery icon display: plugged in, does not support. When I unplug the AC adapter, the computer turns off. Both power and battery light are blue indicating full charge/power, but the battery icon on my screen remains frozen at 14% and says: plugged in, does not support. I tried power off, remove the battery, etc. Did not work. Tried to disable the method battery Microsoft ACPI compatible control others suggest, did not work. I tried to download the BIOS from Gateway drivers, didn't work. This means there is a problem with the battery need to be replaced?

  This has been a problem for the last two days. There is no change made to my computer that I can remember. In the bottom of my screen battery icon has fallen of "plugged in not 14% supported" 4% now. Thanks for trying to help. I guess I'll have to buy a new battery. :-/

• Satellite P850 32Z: battery not charging

  Recently, I had problems with the battery, which means that I need to plug my AC adapter all the time. The battery in the taskbar icon indicates that the battery is 68% and these last days. Placing the cursor on the icon says "plugged in, not charging", and the battery on the laptop light does not illuminate. If I unplug the AC adapter, the laptop shuts down completely.

  I also tried the cold reset following instructions (from the section "Solving a problem" to support)
  1. power off your laptop and unplug the AC adapter
  2. remove the battery from the PC (for models with semi-fixed battery, please follow these instructions)
  3. press the button power for 30 seconds.
  4. then, plug in the adapter without the battery, turn on your computer and start Windows normally
  5. wait 5 min. and then replace the battery on while your laptop is turned on

  In step 4, when I turned on the laptop, the laptop starts and the battery light is on. But then after a few seconds, the battery light turns off and the laptop turns off.

  Someone had this problem?

  I have the same question. I bought a new battery. It worked for about 1 hour from 67 percent and amounting to 100% and then my laptop just died. Now my old battery indicates 0%, no charge, my new battery says 0%, 8 minutes at full load. So I'm a little confused about this and don't know if it's only a battery error. I'm going to service this week, so I know what the problem. I have the Satellite P850 - 33 m

• Loading stops at 97% battery NB500-108, led light never turns green

  I have a mini laptop, NB500-108, running Windows 7, and he never had a battery up to present problems.
  For some reason, battery stopped at 99%, 98% and now to 97% of the load.
  Tray icon says "plugged in, load" but it never reached 100%.

  In addition, the led light never changes from orange to green, as he used to do before.
  It's annoying because I don't see if battery is fully charged when the machine is off.

  I have already tried many suggestions to recalibrate the battery:
  1 flashing BIOS;
  2. compatible control ACPI method to uninstall or disable Microsoft in Device Manager;
  3. full release / full load;
  4 discharge half / full load;
  5 removed the battery and the power button down for 10, 20 or 30 seconds...;
  6. system restore;
  7. same beahaviour with a live Linux pen.

  None of this has worked. Any comment on this, Toshiba Support?
  Thank you in advance.

  > None of this worked. Any comment on this, Toshiba Support?
  Toshiba support? He is a man of user forum, you will get some comments from members of the community ;)

  I think it could be a faulty battery since the lithium batteries would begin to lose own performance after his indictment for 400 - 500 times, I suppose that your battery is affected it s just a theory, but I think it is to test a new game

• Satellite L500 - battery won't charge

  Hello

  I had a problem last week - my laptop (Satellite L500) works well on alternating current, but the icon shows "plugged in, not load ' and the battery charge is at 0%. So if I remove the outgoing cable it runs immediately. Lighting load LED on the front of the battery is not more.

  Laptop is a little more than two years, but works well, everything original Toshiba (battery and charger). I had noticed recently that the battery life was not what it was when lappy was new, but it lasted at least 45 minutes or more, so I knew the battery was endangered, but it is hard to believe it's just failed when two weeks ago could load and run OK?

  Any ideas?

  See you soon,.
  Rebecca

  > so I knew the battery was on the exit door but find it's hard to think he's just failed when two weeks ago could load and run OK?

  I think that nothing is impossible, that it means that the battery could be defective.
  Of course, it is my personal opinion, but I see only two possibilities: either its battery problem or motherboard problem.

  So if I was you, I would check if the problem persists with a new battery tested.

  By the way: you can also view this short work around:
  -disconenct the battery and ac adptor
  -Press the button power (30-40 seconds long)
  -connect the battery and AC adapter and turn on the device
  -to check if the battery can be charged.

• Satellite A200 - loses the battery, switch off the power

  I have a relatively old Satellite A200, yet almost all inside is new except the battery. The battery has a very short life, but that's because its old. Recently the computer started to suddenly lose the battery, so the charge light stays on, the battery light turns off and the battery icon said "plugged in, not charging." However, the computer still work on battery power. If I see it at the time, then by removing and replacing the charger repeatedly, I can start it load again, but if I am not it switches off without warning. Since the battery life is now less than a minute which often.

  I don't think that the problem is with the charger because it always shows the charger is plugged in, and when the computer is off the battery light is always on when it is plugged. I had a problem with the power connector, but if the motherboard was recently replaced so I don't think that's it either.

  If someone could help it would save me a lot of frustration, thank you.

  Hello

  At first, I must say that you should not be frustrated. Problems with consumer products are normal, and each of us has problems with laptops, televisions or other electronic product.

  Let's see what you can do about it.
  Your description is OK, but what I want to know is follow:
  When you remove the battery can work on your laptop with no problems (start work, cut)?

  I also think that the battery is too old and I presume it's troublemaker in the history. It is not easy to explain what behavior flashing if you have a defective hardware or old coin inside.

  Maybe, you need to buy the replacement of the battery and check the features for laptop and the battery, just to see if everything will be OK again. If you will be faced with the same problem again then we can discuss what may be the problem.
  In my opinion only a reason for this could be electronic power supply.

  What do you think?

• HP Deskjet 550 c and Windows 7 (32-bit and 64-bit)

  New motherboard 'ASUS W97 Plus' is not a parallel port, but there series.

  PROBLEMS USB to PARALLEL PORT printer

  Device driver installed for HP550C of Windows 7 and properly registered device (green check mark on the print icon)

  Plugged a USB to parallel port, but could never print - and yes I changed USB0001 to the LPT1 port.

  If I remember printer should be a separate line and appear in Control Panel > Device Manager.

  No line printer displays in Device Manager.

  ----------------------------------------------------------------------

  PROBLEMS COM1 for SERIAL PORT of the printer

  This HP550C also has a serial port.

  Connected a DB25 cable to motherboard printer COM port.

  (Port COM running on the standard - I/O = 3F8h with IRQ = 4)

  Enalbe COM1 in the BIOS.

  Yet once could NOT get printer to print.

  ---------------------------------------

  SUPPORT - I like this old printer and print only the leaves of about 25 to 50 per year.

  My HP Deskjet 500 c stood up and going by adding a side of card

  StarTech.  Card # is PEX1P.    Card has been configured on LPT3 (its default value)

  and the pport.inf driver has been used.

  When installing the driver, if it fails to install - or - you have made previous attempts to get the printer working.

  Make sure you have the print queue before you install or reinstall the driver.

  If the queue is NOT empty, the printer will be set as

  HP500C (1 copy) or ' copy # ' according to the number of objects is in the queue.

• replace battery on laptop aspire 8930g, it does not load what can I do?

  the battery icon says plugged and charge but nothing happens

  Hi Silvano,

  This problem may occur due to hardware problem.

  What version of OS are you using?

  
  Method 1:
  I suggest you run the Microsoft fixit tool and check.

  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us

  Method 2:
  If your operating system is windows 7, I suggest you to return the item and check if that helps.

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  If the problem persists, I suggest you to contact the manufacturer of the computer, because this can be a hardware problem.

  http://www.Acer.ca/AC/en/CA/content/service

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.