Icuuc36.dll bad or missing

Similar Questions

• Error AVFoundationCF.dll is missing, ICUUC36.dll is missing, Errror 7 (Windows error 126) to start Windows

  Original title: Errror 7 (Windows error 126)

  iTunes at startup problems...

  My laptop shows Sony: AVFoundationCF.dll is missing.

  ApplesyncNotifier.exe shows: ICUUC36.dll is missing

  Error 7 (Windows error 126)
  I tried to uninstall and re - install iTunes, but I keep getting these messages at startup.
  Advice please?
  It seems that many other people have the same problem as stated on google etc.
  Thank you.
  Geoffrey Salvage

  Hi Amelia,.

  1. Since when are you facing the issue?

  2 did you a recent software or changes to the material on the computer?

  You can try to repair the itunes and check if it helps.

  If this is not enough, then you can follow the steps provided and check.

  Method 1:

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Try to install itunes and check if the problem persists.

  Method 2:

  If the problem persists, you can run the System File Checker to scan. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Method 3:

  Important: Do not forget to back up the registry before you follow the steps in the link.

  Error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found.

  http://support.Microsoft.com/kb/959077

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this helps and let us know if you need more assistance.

• Expand.exe - error dpx.dll bad image

  Hey

  Whenever I try to install a downloaded update something (e.g. itunes or google chrome) this message always appears and stops him.

  Expand.exe - bad Image

  C:\Windows\system32\dpx.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the software vendor or more support.

  Any ideas on how to solve this problem?

  See you soon

  Hi frjk69,

  Step 1: You can also check out the following link and perform an analysis online on your computer to verify if your computer is infected with a virus.

  http://OneCare.live.com/site/en-us/default.html

  This problem can also occur if a particular dll file is missing or damaged. You can try to run a SFC (System File Checker) scan and check what is happening.

  Step 2: SFC Scan

  (1) close all open windows.

  2) click on the Start, click on ' all programs"and click on"Accessories ". " "»»

  (3) with the button "command prompt" and click on ""run as Administrator ". "

  (4) in the window "Administrator: command prompt", type "sfc/scannow" (without the quotes) and press ENTER.

  (5) restart the computer after completing the analysis of the SFC.

  For more information, you can consult the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SA10-A103: "tpwrreg.dll" file is missing

  tpwrreg.dll file is missing when I install powersaver. No matter if I install disk powersaver or if I download the latest driver. He said the same thing when I try to install "common Modules".

  I think I have a Satellite A103. It says SA10-A103.

  Thank you very much!

  Hello

  I don t have found all the details on this file, but I guess that you install the operating system on your device manually. Without using the Toshiba Recovery CD.
  Well, it is very important that you install Toshiba stuff in the right order.
  1.) chipset utility
  Common modules 2.)
  3. display driver)
  4.) etc.

  Please also see the SP2 update news you will find on the page of the Toshiba driver.

• Windows 7 d3dx10_.dll file is missing

  Original title: WINDOWS 7. DLL FILE MISSING

  I have a problem when I run this game that an error pops up saying that my d3dx10_.dll file is missing what to do

  can any body help me

  Hey Kevindran,

  What game are you talking about?

  D3dx10.dll problems result in one way or another by a problem with Microsoft DirectX. The file d3dx10.dll is one of many files in the DirectX software collection. Because DirectX is used by most Windows-based games and graphics programs advancements, d3dx10.dll errors usually only appear when you use these programs.

  Here's what you can do to fix the error.

  1. find a DirectX installer on your game folder or installation CD or DVD. Usually, if a game uses DirectX, software developers includes a copy of DirectX on the installation disc.

  2. Uninstall the game and then reinstall it again. Something could have happened to the files in the program work with d3dx10.dll and a reinstall might do the trick.

  To get help, view the required information.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• War assault squad game gives error msvcr71.dll file is missing.

  Original title: when I installed the game and tried to play it, it says the msvcr71.dll file is missing unin.and tried kidney says the same thing

   

  get lack msvcr.dll file after installing of the men of war assault squad tried game uin then René game get even

  Hello
  1. What operating system is installed on the computer?
  2. Did you change on your computer before the show?
  3. What is the exact error message?
  Please follow the steps mentioned below:
   
  SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
  Scan sfc enforcement procedure:
  a. click Start, click all programs, click Accessories, right-click command prompt and select run as administrator of .
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow
   
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

• Impossible to play games, get the error message, the MSVCP60.dll file is missing

  I got the game of mahjong quest and game of mahjong quest 2. Now I can not play
  I get an error message MSVCP.60.dll file is missing. Error 126
  Is there a solution to this problem

  Thanks a lot for your answer
  I took my computer to the local repair man
  It solved the problem for me.
  Concerning
  Shirley

• error message saying a .dll file is missing when I try to acess Mngr.vdmdbg task not found.

  I have uninstalled or deleted my Windows XP Pro VDMDBG.dll because I received error messages after

  I am now using the same IDE on this DIY PC like what I used to have XP Pro running. I ran an upgrade or r disc install to resign the drivers and at the same time you run some programs to uninstall some of the OLD drivers of the motherboard and temporary files, but I must have too deep because now, I have only this error message telling me that a .dll file is missing when I try to acess Mngr.vdmdbg task was not found. Reinstalling the application may fix this problem. Where can I go to download or difficulty this annoyance file or program? Thankx again! -Al

  Sounds messy.

  If you see a message like this:

  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called vdmdbg when the name of the file should really be called vdmdbg.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  PS Microsoft support engineers - "try running sfc/scannow and check if it helps" will not replace the missing vdmdbg.dll file because it is not what sfc/scannow does.  If you want to see an experiment to prove that, let me know because I have a ready-made.

• XP MCE said dll files are missing, maybe others. Starting price. Runs. Must fix. My files are corrupt? Terrified Novice needs help...

  Hello

  Please help me solve this computer.  I am an elderly person, not technical and I need to fix it myself if possible.  I studied the system widely.  I don't have the skills or knowledge needed to implement a fix.

  What worries me, is that my files have been damaged by the problems on this computer.  I don't know how to say.

  The system was custom built, not a branded computer.  I have 3 drives, all Originals Microsoft.  XPMCE disks (there are 2) say 2005 on them, the 3rd disc says Version 2005 updates.  He said not cumulative on the third disc. I don't know what that means... I don't know there was also a cumulative 2006 for XP... final.  XP Pro is 2002.

  I installed updates as much as I could, but am stuck with SP2, and I know that the system is vulnerable because of the missing updates.   I want to fix non-destructive if possible.

  Langa claimed it was possible, but he did not speak MCE, but Pro, and they are not the same.  I know not what integrators were not allowed to provide (food?) discs with this particular Version.  I've never done of all disks (experience, is what you get right after that you need), but I'm not sure that the system was perfect when I got it...  I don't have any other type of disk.  I learned that one must save or image the system, so it can be restored.

  The system starts and runs. But the SP3 update can "t be installed.  A program to work indicating that a dll file is missing.  In addition, the system restore stopped working.  I was told the system restore often confuses things and can 'break' installed AV and perhaps other programs, due to conflicts between Windows restoration files and programs that are not part of Windows in terms of time.

  I've always run AntiVirus and MBAM.  I have the instructions step by step for what I could try.

  I would like to find a list of parameters that should be enabled or disabled in different areas... so I can check that they are correct.  The area called services and to uninstall Windows components, I worry.

  I have not really requires... because I don't know how to get the information on this computer.  I ran the Scan Now command and he said I should put in discs... There are 3?   I'm afraid to do anything until I have found on the backup and the possibility of corruption of my files.  I'll have to print files, rather than risk losing things.  My drive back to stop working, don't know if it is related to the lack of files or settings to be wrong.

  Thank you for reading this... I tried to write paragraphs, to make it a bit clearer, I hope that it appears that way.

  Bonnie

  Try to run, type: cmd cmd type: verificateur auditor files SFC SCANNOW once windows starts, insert the

  XP CD, leave the screen. The File Checker runs automatically, at least with XP home & PRO. Also check this

  link for info MCE & SFC. http://support.Microsoft.com/kb/909059

  In addition, sfc is thru, remove xp cd, type: CHKDSK C: /F agree to restart, exit cmd, restart the pc.

  If the problems persist, open the event viewer & see what problems or specific files are always in need of attention...

• Error - Cannot open because the hal.dll file is missing at startup of Windows.

  Original title: Hal.dll missing.

  When I turned on my comp., he said he could not open because the hal.dll file is missing.  File downloaded from another computer of zip drive and plugged in, but nothing happened.  Now what?

  Hi wendy1960,

  1. What is the full error message that you receive?

  2. don't you make changes on your computer before this problem?

  This problem may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.

  You can follow this link & check if the problem persists.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  Hope the helps of information.
  Please post back and we do know.

• bad or missing 'shell' thank you

  original title:... which means bad or missing 'shell' thank you

  difficulty starting a dell optiplex

  Hi marvinjenkins,
   
   
  -What has been the recent change that was made on your computer after this problem started to happen?
   
  Here's a similar post that solves this problem. Try the steps listed in the post below and check if it helps you to solve the problem:
   
  Error: bad or lack of shell startup

• Can't download adobe reader, because a sliprt.dll file is missing.

  Original title: I am running windows vista family premium snd is unable to download adobe reader, because a sliprt.dll file is missing... have tried all suggestions, but no luck... How can I install the missing file?

  Have tried windows helpdesk for assistance but chose not to pass the $99, they asked, to solve the problem.

  See this link on the adobe forums if it helps:

  What is "sliprt.dll?
  http://forums.Adobe.com/message/4465540

• uxlib.dll file is missing when I try to install windows 7.help?

  Hello

  When im trying to upgrade my windows vista computer to windows 7 32 bit... There is an error indicating that the file uxlib.dll is missing. I got the windows operating system 7 at my school... It is a copy free and legal...

  uxlib.dll file is missing. I think that there is something wrong with my laptop computer registry... any help is very appreciated! Thank you.

  Hello

  Go to your laptop manufacturer's website and check if Windows 7 drivers are available for your make and model laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  See you soon.

• I get a window when I start my computer that says: import DLL may be missing, damaged or wrong version. File 'rt170.bpl' error 126

  I get a window when I start my computer that says: import DLL may be missing, damaged or wrong version. File 'rt170.bpl' error 126

  How can I fix this error code, it happens every time I start my computer?

  Hello

  Did you change your computer?

  Method 1:

  I suggest you follow the link and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Windows 7 computer said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  Original title: Windowscodecs.dll missing

  IM using a windows machine 7 and one day, he said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  I don't have to go back, any system restore points

  I ran the/scannow sf in command prompt and it says that the file is corrupted.

  I tried to put the machine in safe mode,

  I tried troubleshooting and software update

  and I tried to download external software to replace the file.

  It also affects the Aero theme, so my background is just a black screen!

  What else can I try that actually work?

  Why we just know it is a virtual machine?  Well...

  Have you looked on your system here to check that the file is actually missing (of course that mine has been replaced):

  

  I downloaded a file called on my OneDrive:

  64bitcodecs.dll (64-bit version)

  The link to my a drive is:

  https://onedrive.live.com/?ID=EC673DF6F8DFEE84%212368&CID=EC673DF6F8DFEE84

  You must visit my OneDrive, upload this file to a place, you can find, rename it to WindowsCodecs.dll and then copy and paste in your c:\windows\system32 folder (assuming that Windows is installed on your C drive).

  When you have done so, check again with Explorer that the file is really there (if it was missing before) and if everything looks good, reboot your system and see what things look like.