IDE #1 error

Similar Questions

• IDE 1 # error with Panasonic UJ - 820B in PS210E Satellite Pro 2100

  Hello
  I am a newbee on this forum. Can someone help me with the following problem?

  I try to install a Panasonic UJ - 820 B CD/DVD drive in my Toshiba SP2100 Pro PS210E - 003 DM - Satellite of THE.
  It fits perfect, but... my give me bios ide 1 # error. My bios is 1.40 and I can't find an update.
  I can't even find the master/slave switches

  DOE - anyone have a solution for this problem?

  thnx

  What to say? With short words: you try to use ODD not compatible. The assignment of pins is the same and the STRANGE may not be recognized correctly.

  Sorry but I don't have a solution for this laptop more old. Maybe partner allowed in your country can provide you with more information.

  By the way: are looking for a little to this forum. Somewhere I read about bypassing these two pins of connection (something about the PIN 45 and 47). I remember no more.

• IDE #1 ERROR at the start of Satellite Pro 2100 Series

  Hello... I'm an IDE #1 ERROR displayed at startup of the computer. My CD/DVD player does not seem to be recognized (in the Device Manager the drive is not displayed) and certainly does not at all. I have installed a new CD/player player, this is the original factory supplied.

  In addition, another clue is when I press one of the dvd control buttons on the front of the pop window - next up will appear:

  "The setting of the drive in Toshiba controls is false. If the audio and video control buttons do not work. Please select the correct drive letter.for the internal CD/DVD drive.

  However on the drop-down list there is no drive letter for choose!
  Any help would be gratefully receieved. Thank you, Matt

  HI Matt,

  It seems that your IDE controller is damaged. To ensure the safety of reading, you should recover the laptop with the Toshiba recovery Image and if the failure is on a new system of fees, the IDE controller is bad!

  It may be possible that only the IDE cable is loose, but to kow that it would be better to put the laptop to a Toshiba Service partner!

  To bye daniel

• Satellite Pro A10 - IDE 1 # error at startup to the top

  HI, I have a Satellite pro A10 and everything is working very well in recent years to date.
  A few days ago I started having a cd read error / invalid dvd disc format still drives fine on all the other PCs work.

  Today as I get #1 error on boot up IDE... the laptop is always standard when I got off the shelf. thinking the drive might be dead due to wear I replaced the drive with a drive to work and I still get the same error. I removed the completely STRANGE and yet to come.

  I also updated the usb floppy bios that has been a success. and the best part of all this. the dvd - rom supplied with the laptop works fine in my other a10 tosh!

  Someone at - it ideas. I really need to replace the motherboard if I can help it. This is the only problem with the laptop.

  THX in advance people.

  Hello James

  IDE 1 # error is typical when ODD is not accepted by the system. The reason may be defective drive or the use of non-compliant readers. The fact is that each player can not be used with all portable models because of the allocation of the different pins.

  In your case, it is really strange that the work by car on other A10 but not on this one. Because of this, I presume that there may be a problem with connectors. I'm afraid there is not much to do. You can try to check out them and see if they are clean and not oxidized.

  Sorry, but we cannot speculate what may be the problem but, as you know, only intensive test may give you more answers.

  Good luck and let us know if you will find what is the problem of resources.

• Portege M100 - Dvd drive IDE 1 error

  I tried to replace the drive cdrw/dvd combo to a dvd rw drive, but loading it says error IDE 1, but its strange, that you cannot start out of him, but in xp you can use.

  I'm sure its something to do with the Bios.

  Any help would be much appreciated

  Thank you

  > I tried to swap the drive cdrw/dvd combo to a dvd rw drive, loading it said error IDE 1, but its strange, that you cannot start out of him, but in xp you can use.

  I think you used a CD/DVD player with bad parameters master/slave/c-salt.
  If the reader doesn t compatible with the right settings, BIOS will not recognize the IDE #1 error and it will appear as in your case

  You should know that not all drives are compatible. I'm not quite sure if your user manual contains the disks info picked up and compatible, but you could check it m

  Otherwise, I would recommend contacting the partner of service authorized in your country for a list of compatible readers or to order a good.

  See you soon

• Tecra M1 - IDE 1 error after upgrade DVD

  Hi all

  Can I replace my DVD-ROM DVD - RW NEC 7551 A, but M1 does not recognize. After starting, it returns IDE #1 Error message.
  I tried whith cd - rw Teac CD-W224E, same result. Both are good work, I've tested on another laptop. Original DVD - ROM works very well on my Tecra M1 PT930E.

  Someone help, please?

  Hello, Lars

  Please check eBay. You will find so many used parts for Toshiba laptops.
  Parts for older models as your Tecra M1 are cheap.

• Satellite A40-SP151 - ide #1 error on non-existent drive.

  OK, I got a laptop Satellite A40-sp151; 3 months ago we sent it to repair and they have damaged the connector of the cd player.
  If we use it without the cd unit.

  It was fine, but yesterday I received an error ide #1, without apparent reason.
  The worst is that said error won't start the computer as it will freeze.

  Hello

  The ide #1 error means that the BIOS does not recognize the device that is connected to the #1 controller.
  Especially the HARD drive is connected to the controller of #0 and the CD/DVD drive is connected to the #1 controller.

  In your case, it seems that the CD/DVD drive is bad and that is why this error.

  Welcome them

• IDE #1 error on Satellite Pro A10

  Hi, my laptop Satellite Pro A10 displays IDE #1 error whenever I try to put it on. This message is all I get, even if it is shown for a short period of time - the laptop always comes back to this message, it tries to load blanbk of the screen just go and then this message appears every time! I was wondering if someone could explain what this means and how can I solve this problem?

  Thank you

  David

  Hello David

  This error occurs if there is a problem with the CD/DVD drive. For example, this error occurs if you try to use the incompatible reader. It will be interesting to see what happens if the drive is removed.

  You did any player upgrade?

• IDE #0 error on Satellite Pro A10

  We have a Sat Pro A10, which displays the following error at startup; IDE #0 error.
  The bios does not appear a hard drive.
  Have you tried a new hard drive, the same error

  Hello

  This error is certainly due to the HARD drive. If there is no success with the new HARD drive should be problem with contacts or HARD disk on the motherboard controller.

  Please contact your dealer or the Toshiba ASP. Really, I don't think you can do anything alone.

• Satellite Pro A10 fails to start - IDE #0 ERROR

  On startup, I get the Toshiba start screen and there is a regular click from the HARD drive. After 20 to 30 seconds, I get:

  ERROR IDE #0

  then a pause, followed by the following codes of boot agent (Intel FE v4.1.09)

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent
  Insert system disk in drive.

  I have the unpleasant feeling that the HARD disk is dead. I can replace it if necessary, but is it possible to extract the files from it before going so far?

  That is a clear symptom of a HARD disk failure.
  The + IDE #0 + error means that the BIOS didn't recognize the HARD drive (due to a hardware fault probably) and cannot start from the HARD disk.

  Then he pushes in the alternative startup > LAN
  The + PXE - E61: Media test failure, check cable + error because the laptop can not boot from LAN.

  I think that you just have to replace the HARD drive and then you need to reinstall new OS.

  This will help for sure.

• Portege 2000: IDE #0 error appears

  I've been working with my Portege 2000 without problems, but 2 days ago, when I turn on the screen see "error ide #0", I tried hd 1'8 "with and the adapter to a pc standard and everything seems correct, all files and folders is displayed."

  When I turn on the lights hd' laptop computer led but "ide #0 error" appears.

  BIOS does not show any reader.

  Thank you

  Hello

  My first idea was a malfunction of the HARD drive, because the HARD drive is connected to the controller of DIE #0.
  Especially the message if the BIOS does not recognize the HARD drive!
  Try to access the BIOS and check if the HARD drive is listed and has been set to primary IDE.

  If the BIOS talk you about this issue means that it s is not a software problem, but a hardware problem.
  Try to format the HARD disk on the other computer and check if it of possible to reuse the HARD drive in the laptop.

  If this does not help, I guess that the HARD drive needs to be replaced :(

• Tecra A2: IDE #0 error message appears

  I have a Tercra A2 and am now a #0 error at startup IDE - what is the cause and is there something to fix this problem?

  The IDE #0 error message refers primarily to the HARD drive connection wrong or missing.
  You replaced the HARD drive in the past or if you are able to boot from the HARD drive?

  Eventually the HARD drive died and the BIOS does not recognize the HARD drive.

• Tecra 9100: After the CD/DVD drive upgrade IDE #1 error apears

  Hello!

  I'm a happy user of Toshiba laptops, and I like my Tecra is even older. My setup is a PIVm 2.0 Ghz and a few days, I changed the HARD drive. This isn't THE PROBLEM.

  Now, I have a 80 GB Seagate HDD and works very well. Days ago, I bought a DVD - RW, H - L space (Hitachi-LG) GWA-4082N, origin of another towing specifications.

  When I boot the IDE #1 ERROR message is displayed. In windows works fine, recognized as the secondary Slave PIO mode only. I am integrating then, I searcehd the web and found solutions.

  I've read on C - SALT and reversed the master/slave issue. I downloaded a firmware for Toshiba, same version for my DVD but nothing. In my opinion, is for Toshiba, but not for this model. So I tried the solution of jumper pins 45 & 47. 47 pins Cable sync/select and 45 is identical to 48 GND.

  The solution is good half. I started the laptop and does not work, no more ERROR IDE. In windows is now secondary master UDMA Mode. Works very well...

  THE PROBLEM: it's that I turn off the laptop, pick up the DVD, battery and Commander edge and when I reconected all back, the #1 ERROR IDE is sown again :(((.) Therefore, works, but sometimes it is not. What is the problem? Even with the 45 & 47 pins the message. I have readit pins 35, 36 is something CSEL0, CSEL1...

  I do more short films? Or where I can find a good firmware for my drive or the software to mass the firmware...

  Please read this post and I hope you can help me!

  Hello

  As you already know not all ODD is compatible with a laptop because masters /slave and c - salt settings.
  These parameters are controlled by a firmware and most often but not always these firmware located on sites of car manufacturing.

  I don't think you'll find this firmware on the Toshiba site. It s recommend buying the good player but don't not to Flash the firmware.

  Anyway, I also found the statement on the connection of the PIN 45 and 47 together.
  This is a solution in time and not recommended because it will damage the other pins.

• SD-C2612 IDE #1 error after wrong firmware update - Satellite Pro A10

  Hello
  I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).

  I tried flashing with the right firmware (1315) but get the message to the Primary Master and Slave as "Not ATAPI Device" and "drive not connected".

  NB: at the start, even with the deleted DVD ROM, I always get the #1 error IDE.

  Update the bios to the latest version would help or is there all the options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?

  Thanks in advance for any advice you can give.

  Best regards
  Angus

  > I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).

  Lol :D I have don t wonder you get the IDE #1 error message.
  As you say yourself, you have flashed the drive with the wrong firmware. This has damaged the master/slave/c-salt settings of readers and so the BIOS doesn't recognize the CD/DVD drive. But I wonder why someone flashing the drive with a bad firmware?  :| We still know that a wrong firmware can damage the CD/DVD drive... and above all it is not necessary to update the firmware.

  > Update the bios to the latest version would help
  The BISO update will not help you because you have already good BIOS and it s NOT a problem of BIOS, but the evil and not compatible firmware is stored.

  > or are there options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?
  I'm don't know if this helps, but I know that it is not desirable because it may damage the material of CD/DVD players

  I recommend you contact the ASP in your country guys might revive the CD/DVD drive. Let's hope

• Satellite Pro A10: IDE #1 error - drive doesn't appear unless the CD is inserted

  Hello

  I've been recently wearing on my bed watching a DVD when I fell asleep with the laptop sitting next me on my bed. During the night, however I moved and he accidentally knocked on the side of my bed.
  The next day when I booted up the loading it said IDE #1 error since then I understand it is a mistake to CD/DVD drive, the device works very well, starts ok (except the IDE error) and I can use it as usual except that there is no DVD drive in 'My computer', which is a bit of a pain when I want to watch a movie/play a game or install something.

  The drive itself is completely insensitive, when I press the button to eject the tray, it doesn't do a thing.
  I decided to try to remove and put back the drive to see if it was struck just loose when he fell of the bed as he fell only in short way (approximately down to 18 ".)

  I removed all the covers on the bottom of the laptop and checked that all was in place correctly and to try to understand how to remove the drive but would not do too adventurous as to worsen the situation, the only thing I have done is to remove the CPU fan and remove a few stuffed animals and remove the HARD drive and glanced to make sure it was not damaged in any place) It wasn't) and then replaced and replace all covers.

  When I rebooted the system, it started fine as usual, and the player react when I press the eject button, but the DVD player (sometimes) will now appear in 'My computer', but only when I insert something (be it a DVD/game/program), then it displays the error message an error of e/s on the device there.

  Any help of you all would be a great help, I thought just remove the drive and replacing it with a new one as a DVD RW one but I do not know how, I would be very grateful for advice and guidance you could provide.

  Thank you very much
  Michael

  Hi Michael,

  It is possible that the relocation of your optical drive may be necessary to refer it to the full. Unfortunately on the A10, it will be dismantled in order to achieve its screws located under the keyboard.

  Please see the following link for the complete disassembly instructions. The DVD player is covered in step 13. http://www.irisvista.com/tech/laptops/ToshibaA15/SatelliteA15_laptop_disassembly_1.htm

  concerning