IdeaPad Y500 cannot start

Similar Questions

• I resized the partition of C: Lenovo IdeaPad Y500 laptop with the partion of aomei assistant and now I'm not able to start.

  Original title: I messed UP WITH MY 8 PREINSTALLED VICTORY AND IT DOES not START NOW

  My lenovo ideapad y500 supplied with windows 8 pre installed. I wanted to set/resize partitions as the laptop has been delivered with a single partition (C :). after I resized with the partion of aomei Wizard something happened and now I don't am not able to start. my laptop has been delivered with the pre-installed operating system, and she had no DVD of win8. I dinot do the recovery disks either. Some say that the product key is injected into the bios) , so I neednt worry about losing the win8 original license. any means now what shud I do to get reinstalled 8 victory! where can I download an image of victory 8 to install?

  LENOVO has this option of key recovery is not working too now that I changed the partitions. (IE it works if the partitions are unchanged)

  Help, please!

  You have an OEM key - make sure that it is the OEM version of win8.

  Lenovo has a drive engineering key which one of its options is to repair the functionality of the button a magical touch.

  Ask in the Lenovo forum if they can direct you to the download of recovery engineering key a repair disk and how to fix your recovery button.

  http://forums.Lenovo.com

  Can you get to a command prompt to start with a system repair disc or the installation or the upgrade disk...

  and taste the repair orders bootrec.exe/fixboot would be a good idea to start with.

• IdeaPad Y500 "Windows doesn't detect any hardware networking".

  Hello

  I have problems with my recently purchased Lenovo Ideapad Y500 because it is impossible to connect to the internet. As a first step, the connection worked well and I managed to set up the connection Wireless using an ethernet cable.

  The problems started when I installed the F-Secure virus/firewall program - in the middle of the installation process (some time after the installation tool uninstalled MacAfee default program) the laptop became unresponsive. First of all everything except the background color disappeared, then the screen went completely empty and the laptop has not responded to other buttons. I waited for about 20 minutes until what I pressed the button for a few seconds in order to stop the laptop.

  The laptop rebooted normally, and the installation of F-Secure program was still underway. However, because the laptop had been closed at halfway, I decided to cancel the installation and re-install the program. I removed the parts installed with Control Panel tools, to realize that the wireless internet from the laptop disappeared.

  The laptop detects all connections; the network group says no connection is available. Previously, before the strange white screen problem, the Panel showed several nearby wi - fi networks. When I try to connect via the Network Center and sharing, I get only "Windows does not detect any networking hardware." Connect the ethernet cable (connected to the modem/router) makes no difference.

  I managed to solve this problem. For some reason, the pilots of two network components have been updated but did not work, so I did a restore on those, the question of fixing.

• Mac cannot start after el captain

  Cannot start after updating mac

  Safe Mode boot removes the system caches that can help after an OS X day or level.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

• Firefox is exhausted before but cannot start more

  Firefox is exhausted before but cannot start more.
  I tried the solutions, but it does not work

  Large. Glad to know you have the root of the problem, and thanks for posting back.

  Usually, we suggest that when checking for malware several tools to serve because no single tool is looking for or find everything. The standard help article

  • Fix Firefox problems caused by malicious software

• Cannot start Firefox, crash even in Crash Reporter. Not be able to start in safe mode either.

  Cannot start Firefox. He goes to Mozilla Crash Reporter every time. I can't even start it Safe Mode.
  I tried to uninstall and delete all the files related to Mozilla Firefox in & AppData & and each base registry with RegEdit.

  I have run, or at least try, on a system with Windows 7 64 bit, 8 GB RAM, 314.22 driver for Nvidia GeForce GPU and a CPU Intel Core i5 2500 k CPU.

  Little help would be nice.

  Hi deliubogdan

  Try to remove the extension DataMngr (Datamngr.dll)

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • [816181/questions/816181]

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  So what measures through 'install '?

• Tecra S5 - adapter to display cannot start - Code 10

  Hello

  I have a problem with my laptop (Tecra S5 series).
  Every time when I start or restart my laptop, the screen moves too slowly, it has yellow bands and sometimes is flashing.
  When I open the Device Manager I see the graphics card (NVIDIA Quadro NVS 130 M) with yellow circuit with a brand extension. When I go inside it is said: the device cannot start. Code 10.

  Then I have to go Safe Mode, uninstall the drivers for NVIDIA Quadro NVS 130 M, reinstall and restart. I noticed that when this video adapter is OK, so I don't have problems with my laptop screen.

  Can someone help me?

  What operating system do you use?
  I put t know since when you have this problem, but if this happens again and again I recommend you to install original OS that you got with your laptop. It contains the original, including the display driver drivers, and something like that should not happen.

• Cannot start the satellite M35X

  Hi all.

  Cannot start my Satellite.
  When I push the power button, it turns on, the blue led is ok but the HDD led blinks 1 or 2 times or it happened when it is not clear at all and put the laptop off, but the power button remains lit.

  However, from time to time, it starts up, shuts down load the XP but after 1 minute.

  I have reinstaled recently the WinXP, and I did a bios update. Before that, the laptop didn't have this behavior, however, the XP raported me that the hard drive is faulty.
  I figured it is something related to the HARD drive.
  What should I do?

  How can I be sure that the HARD disk is wrong?

  Hi mate,

  If your HARD drive has bad sectors, you must exchange it ;)

  For example before doing this, you can check for bad sectors using specific diagnostic tools HDD as Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Here, you can download an image file to create a boot disk. Then boot from it and to start the test, it is quite easy! ;)

  If your HARD drive is faulty, this tool should recognize this.

• Envy 17-j120us: high definition Audio Device, Code 10 device cannot start, yellow triangle

  My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.

  See if it works...

  Download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.

  Have 7-zip extract of: and let it extract the file in the file name (sp72370).

  Go to Device Manager and click on the audio device HD of the problem.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

• Portege Z930 cannot start with installed RAM module

  My laptop Toshiba Portege Z930-108 has stopped booting with any module of RAM installed in the support.

  If I remove RAM module, laptop computer starts and works fine, but if I install any module of RAM (4 GB 1600 original or a new 4 1600 CL9 or 1600 8 CL11) the computer cannot start.

  The screen stays black and power led flashing two green and two orange and a few seconds later, 3G indicator also on blue.

  This is the only problem I have with this computer, but it's strange.

  I updated the BIOS to the latest version and the problem is not resolved.

  I tried to reset the hardware (http://aps2.toshiba-tro.de/kb0/TSB3B03J90000R01.htm), also I tried to reset the equipment with power button 30 seconds without battery but button without success.

  Any idea on this problem of strage?

  Kind regards
  Lito.

  I guess you used bad RAM or not fully compatible modules.
  It's the only plausible explanation.

  I recommend you to order the RAM modules recommended by Toshiba that are:

  4 GB DDR3 - 1600 PA5037U-1M4G

  2 GB DDR3 - 1600 PA5037U-1M2G

• Portege Z830 - Infineon TPM device cannot start (code 10)

  Hello

  I have a new Z830 - 10F, and I am trying to configure Bitlocker (windows 7 - 64 bit).
  I have a problem with the Infineon TPM device. (Driver version 2.1.1.0)
  This device cannot start (code 10).

  I downloaded all the drivers from Toshiba, but it does not work.

  Any idea?

  Thank you.

  Hello

  The TPM is optional and not equipped Portege Z830-10F unit a module TPM.

  Welcome them

• Outlook cannot start because DCIMAN32.dll is missing

  Whenever I want to open Microsoft outlook the following textbox is displayed. * The program cannot start because DCIMAN32.dll is missing on your computer. Try reinstalling the program to fix this problem *. Then when I click ok, Outlook opens. Also when you use Internet Explorer, the window open flashes quickly, any suggestions?

  Thank you for your help

  Hey,.

  And have you tried to reinstall Outlook, such as mentioned in the error message?

• Re: Satellite A210 - cannot start and how can I backup my data?

  Hi, after installing some software of spyware on my vista A210 (spysweeper) I rebooted my laptop, restart it went straight to the Boot Manager and load insert me my recovery disc and follow the instructions in an effective way. The only options I have with this disc to format my hard drive, it seems to indicate that it will erase everything (that would include things on my partitioned drive?).

  No there is no way to start the PC in safe mode? I tried using the F8 key, but couldn't get the SafeMode menu by using the recovery disk to start my machine. So when I chose to start windows in safe mode it loaded the disc in place.

  This sounds like a familiar problem, if so someone knows how can I restore the last parameters of weeks without access to windows?

  I'll have to swallow and format my drive, on the partition that I have a few photos, etc. that I've not saved yet a trip last week so I want to only do this as a last resort?

  Would I be able to go buy a copy of vista and fix it using the CD? My laptop came with windows vista installed but no windows disk.

  Any help is very appreciated!

  Thank you.

  If you are not able to go into the F8 advanced boot menu, you cannot start in safe mode. It's done.
  I think the only way is to reinstall Vista.

  The reason why the laptop came without installation disk is the disk HARD on the second partition a folder called "HDDRecovery". This folder contains the factory settings and you can restore it if you go to the menu of advanced, boot repair my computer and then you can select the Toshiba Recovery feature.
  In addition, you always get a reminder message that you must burn this image to a DVD:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

  However, now it is too late to burn the recovery disc.
  In your case, I would order a Toshiba Recovery disk directly. Then, you can reinstall the laptop and the Toshiba drive already contains all the drivers and tools.
  Here you can order: [https://backupmedia.toshiba.eu/landing.aspx]

  If you use the recovery disk Toshiba that the whole HARD disk will be formatted. You should back up your data before doing this.
  To do this, you can buy an external HARD drive enclosure. Remove the HARD drive from the laptop, put it in the case and plug it into another PC or laptop. Then, you are able to save your data.

  I hope I could help you.

• Vista cannot start because of accidentally deleted system files

  Hello

  my laptop was working very well until some files were accidentally deleted and now Vista cannot start.
  There is a message saying that I need to contact the system administrator or the manufacturer of the pc.

  Is there anything you could recommend?
  I would appreciate if you could help me find a way to record all of the information contained in hard drives.

  see you soon

  If you are not able to boot up the laptop and refuse it to Vista to start then take recovery in hand, insert it and start on this CD from Toshiba.

  Then the cell phone should boot from the recovery CD and reinstall the whole OS again.
  This should help, but the HARD drive will be formatted.