IdeaPad Z50-70 wireless - hardware radio off

Similar Questions

• T420 hardware Radio OFF - How can I activate?

  As many times as I press FN + F5, radio equipment will not be enabled. Help, please? Is it possible to turn wireless on?

  There is a very small switch on the right side of the computer.

• Cannot find wireless networks - 'hardware radio switch off' on HP Pavilion dv6 Notebook PC

  The product name and number:

  HP Pavilion dv6 Notebook PC, product number: LZ802PA

  Operating system installed:

  Windows 7 Home Basic, 64-bit

  Error message:

  "Radio equipment extinguished."

  All changes to your system until the problem occurred:

  I was looking for a solution anywhere, including the hp Web site and forum and manual PDFs.

  I have a problem to connect to internet wireless (I can connect using a cable). The wireless button is on (seeing the key F12 is blue), but "Intel My WIFI utility" tells me that the "hardware radio switch off." I was looking for the switch on the case and sought a shortcut to do this - but could not find.

  As a result - my laptop cannot recognize any wireless connection, even if they exist for sure!

  I also used Microsoft System Restore to restore to an earlier date - before the problem accrued. There was no difference.

  Also, I reinstalled the drivers wireless Intel, Intel PROSet and my WIFI for Microsoft Windows 7. It does not help either.

  Help, please!

  I managed to fix it!

  I had to get into the BIOS and enable the network card in there!

• Z50 70 portable wireless ability turns off

  Hi, I recently bought a laptop Lenovo z50 - 70 with Broadcom Wireless Adapters. Its a 7-32-bit Windows System. Wireless LAN worked fine for a few hours, but after a reboot it started saying that wireless capability is turned off. I tried following:

  1A sought a wireless hardware switch. There is none.

  2. reinstalled WLAN drivers lenovo site without success.

  3. restarted service service autoconfiguration WLAN for nothing doesn't.

  Your help is very appreciated.

  Thank you

  try to install the Lenovo energy management software. It worked for me. and at the end of installation press Fn + F7.

• Portege R500 - Novatel Wireless Radio off

  Hello

  I've seen a few posts on here suggesting various downloads and updates to solve problems with 3 G connectivity, but none of these downloads have worked for me.

  Novatel loads OK... but reports still no Service - Radio Off... I can't find a way to get "Radio on" or any info on what might be the issue...

  Any help at all would be great!

  Dave L

  Hello

  Are maybe something stupid but you sure that you have an internal 3G module?

  As far as I know not all models are equipped with this feature to check this first, please!

• A30 - problem with intel pro Wireless 2200bg - wireless always turn off

  Hello.

  I have a problem with the wireless card Intel pci mini. I installed in the connector mini pci and connected the 2 wires. I also installed drivers and software to Intel. But the connection is always available. I changed the wireless switch located on the left side of my toshiba, but said software, the hardware radio switch is off.
  I reinstalled operaiting system XP Home, XP Pro, but all the time I have information that this switch is off.

  Thanks for any information

  Hello

  Please first check that when you the physical switch turn on wireless communication, you should also somewhere (probably near the switch) see an orange light.
  If this isn't the case, then there is something wrong.
  Did also attach you the antenna cables to the Wifi card?
  You use the Windows XP client or customer of Intel for wifi?

  BR

  Tom

• Lenovo IdeaPad Z50-75 - cannot install Windows 8 it is not booting from the DVD

  Hello

  I bought a Lenovo IdeaPad Z50-75 (with Free DOS):

  BIOS version: A4CN24WW (V 1.03)

  Im trying to install Windows 8, but it just doesn't work. no question, if I allow secure boot or turn it off. No matter if I choose from the "OS Optimized Defaults: [Win8 64 bit]»

  I changed the boot priority so that the DVD player is on the highest place (1).

  has obtained a Win8 DVD work, has also got professional win7, but I prefer to install Windows 8.

  Although Win7 is OK also if it will work then.

  I don't know what to do else that pass around these options. and it doesn't help me at all.

  Whenever I start the laptop and choose to start with the DVD player lights up and nothing happens.

  Someone please help me with this annoying problem of hella.

  Thanks in advance.

  
  

• T400 Wireless (Hardware) does not

  Hi all

  No luck with research here so will try a post instead.

  I just put in place a new T400 for work and one of the first things I did was disable connection Intel ProSet utility as I wanted to use the XP/Windows Wireless Networking that I know.

  The problem is that it has turned wireless hardware level, but also at the level of the utility, so, although the Windows wireless should now be operational, the material does not detect nearby networks.

  Basically little clear air at the left end of the light Panel next to the Lenovo brand is not on. Unlike my old laptop, there is no button to turn on the wireless on the hardware level, so I'm stuck.

  Can anyone provide some tips? I checked the BIOS settings (Wireless = WE) and in a variety of places in Windows, but most of those who seem to assume that the hardware is broadcasting.

  Thanks in advance.

  This Intel ProSet is a really awkward software.  Only when I gave up and tried to re - activate I managed to find a way to connect through Windows.  Here's what I did to remedy:

  (1) start > run > Msconfig > Services then re-enabled all the Intel ProSet of list elements (3 in mine, do not know if this is necessary)

  (2) start > Control Panel > administrative tools > Services > Wireless Zero set (must be status = Started)

  (3) start > all programs > Intel Wireless Utility. At the bottom of the screen, make sure that WiFi on is selected (sets the material to be on, where Fn + F5 and the hardware on the laptop switch does not work if it is turned off).

  At the top of this screen, make sure it says "Windows is currently managing this WiFi adapter.

  (4) If you click Open Network properties just below is wireless networks now, but if you are trying to connect it will get stuck on the first step of the connection, then expire.

  (5) right click my computer > properties > hardware > Device Manager > network adapters.  Select the Intel(r) WiFi Link 5100 AGN (or similar), right click and uninstall.  You could say that it is not possible to uninstall (as it is used at startup) but it seems anyway uninstall it.

  (6) in the Device Manager, right click the name of your computer up and "search the hardware changes.  This should replace the adapter.

  (7) you should now notice that:

  -l' icon/light wireless at the bottom of your screen is now on which indicates that the hardware is broadcasting.
  -You can connect to your network of your choice and a happy connected icon is visible in the system tray.
  -the little shit ProSet icon is not visible in the system tray.

  All that's left to do is thank Intel for waste 6 hours of your life.

  Hope this works for you.
  TT

  PS: don't bother installing a new version of the drivers (12.4.0.42 or similar is ongoing) because it is not compatible with the software. Brilliant.

• Hey, question on my new IdeaPad z50-75 (AMD fx-7500) - cpu not no clock to the top

  Hello everyone

  I just got two or three days old Lenovo IdeaPad z50-75, running on the FX-7500 AMD really happy about some things

  Firstly, I noticed just now that my CPU runs at 1.07 Ghz, before it was always more than 2 Ghz or so that was good... but maybe I've touched something somewhere in the settings powr or something and now it stays on 1.07 same when the cpu used well enough. I put the power plan to high performance and also Energy manager is configured using the high performance and Conservation mode is on... What is the holdup? why it is not itself clock upwards? I think it's slower than before... so any reference to what could cause this.

  Grateful for any advice or ideas.

  StonieMalony

  I do not have a similar unit like yours, but try not to use the mode of conservation in conservation mode and see if you now have what you expect.

• Compaq 6910p - wireless adapter turns off when the ethernet cable is connected

  Hi all

  Then, when I plug in an ethernet cable (connected to a router), my wireless adapter turns off.

  He immediately turns on when I unplug the ethernet cable.

  It isn't really a problem, either connection will provide my needs of networking, but it's just weird and I don't like it.

  Using Win7 Ultimate 64 bit.

  advice would be appreciated.

  Hello:

  This is the default setting to save the battery.

  If you always want the wireless on, go into BIOS > Menu of device Configuration and activation to deactivate WLAN-LAN.

• My wireless is turned off or disabled.

  My wireless is turned off or disabled. The wireless button is yellow. I tried pressing the wireless button and the button is still yellow. Please let me know what to do to activate the wireless. Thank you.

  HP laptop

  Compaq 6530 b

  s/n CNU93829VL

  p/n KE822AV

  XP operating system

  I thought about it. Had to push the button wireless on the reboot of the computer.

• I am running XP Pro on my Dell Inspiron E1505. My wireless switch is 'off '. How do I turn it on?

  I am running XP Pro on my Dell Inspiron E1505. My wireless switch is 'off '. How do I turn it on?

  Your manual is here...

  FTP://FTP.Dell.com/manuals/common/Inspiron-6400x_owner%27s%20manual_en-us.PDF

  Extract from page 74...

  Enabling/disabling the wireless network adapter

  NOTE:

  If you are unable to connect to a wireless network, make sure you have all the components for

  establishing a WLAN (see "What need you to establish a WLAN connection" on page 70), then check that your wireless network card is enabled by pressing on .

  Tricky

• Portege A600: 3 G radio off and can depend on the use of Win 7 64 bit

  I have a Portege A600 with 3G (Ericsson F3507g).

  The Wireless Manager says the radio is off and I should activate it via the hardware switch.
  The switch is turned on, but only effects the Wifi and Bluetooth. FN + F8 does nothing.

  All the drivers are installed and I also installed RF 3 G utility.
  There is nothing in the BIOS referring to WWAN. I have Windows 7 64 bit installed.

  I saw a suggestion to install the value Pack, but the two zip files will not extract because they suggest that they are part of a multi zip pack.

  > I saw a suggestion to install the value Pack, but the two zip files will not extract because they suggest that they are part of a multi zip pack.

  [Value added Package | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 243 & selProduct = 821 & selSho rtMod = 797 & language = 13 & selOS = all & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 10 & ID = 73571 & OSI D = 30 & driverLanguage = 42] must be installed to use the function keys and activated the WiFi / 3G.

  After downloading, you can decompress the package. Then, you will find a file .exe inside the new folder.
  This exe file is also a zipped package. You can extract this right click on the exe file and choosing extract here. Then you will find the setup.exe file, which should launch the installation

  But before doing the [pilot 3 G | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 243 & selProduct = 821 & selSho rtMod = 797 & language = 13 & selOS = all & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 71930 & DISO =-1 & driverLanguage = 42] and [3 G RF Power Control Utility | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries =] [243 & selProduct = 821 & selSho rtMod = 797 & language = 13 & selOS = all & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 73658 & DISO =-1 & driverLanguage = 42] must be installed.

• Lenovo Ideapad Y450 switch wireless works not

  Hello

  I bought an Ideapad Y450 is about 2 weeks and for the first time I tried to use wireless, it did not work. There were other additional software that I added such as Firefox and microsoft office 2007 at the time wherever I checked the wireless feature. Ichecked the on Device Manager (Intel WiFi Link 5100 AGN) network adapter and it seemed to work fine.

  Later, I uninstalled the ReadyComm 4.0 software and internet Norton Security. I switched to AVG Antivirus. For some reason, the front switch and the Fn + F5 started working and I was delighted. Unfortunately, the next day, the wireless radio just stopped working. The front switch and the shortcut (Fn + F5) no longer work. I called technical support and asked me to reinstall the driver for the network card - did not work. I rebooted the computer on safe mode - didn't work. I guess something must have been installed automatically via windows update.

  I'm trying to avoid having to use the recovery key to activate the computer back to the factory settings (I did not a recovery yet disc).

  I hope that someone has experienced the same thing before and could help me.

  I could understand not just what prevents the computer to turn on the wireless capability. I know that the switch works because one day when he did. Or is the switch just partially broken?

  Thank you very much for all your suggestions. I should have updated all the you what happened to my laptop. What I did about a month and half ago was so I used the one key recovery option offered by Lenovo to restore my laptop to its factory settings. I lost all the software that I installed in my laptop, but it was worth it. My wireless and bluetooth works now. I can turn them on and off. The switch works. The Fn + F5 shortcut works. I backed up all my files until I reinstalled my whole hard drive so that the process was not too painful for me.

  Right now, I have Lenovo ReadyComm 4.0 in my computer and in some sort, it has not been any problem with my wireless connection. If all goes well it will never.

  Thanks again for your help!

• 8530w Win7 Home Premium fresh install - Wifi and bluetooth radio off just not online

  Hi all

  I encountered a strange problem. I did a fresh install of Windows 7 Home Premium 32 bit edition. I installed all the essential drivers; setting network, wifi, quick launch button drivers HP and others. Wired network works fine. However, the wifi button is orange and does not work on contact. All other keys work well, so I guess we can exclude. The driver is loaded OK and the hardware is connected according to the Intel Pro Set diagnostic tools. However, he also pointed out that the radio switch is thrown off, so the orange light right?

  The radio is off, bluetooth driver moved not because of 'not present material' and I can't enable it.

  I've seen other people with the same problem, but a majority of those who appear to have been related to the HP power management. And as this is a clean install, I don't think that power management is the problem. Just to be safe, I disabled the power management capability in the adapter properties.

  So, is there another way to activate the radio via the software without relying on the button of the Panel wifi? Are there other ways to diagnose the problem?

  Thanks for your help!

  Best regards

  / Thomas

  Have you installed extensions Intel Proset for Windows 7?

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3999719&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D4%257CswItem%253Dob_83281_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Have you installed the HP Wireless Assistant?

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3999719&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_84194_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You can activate wifi via network connections