Identify the follow-up sessions: search the MMC gave no results for NBSMBLOGGER

Similar Questions

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• Hello. I need help to identify the right choice of processor for updating my old PC system.

  Hello. I would be eternally grateful if someone can help me identify the processors will work with my system.

  The HP site says that my system supports up to Pentium 4 Hyper Threading 3.8 GHz processor.

  The main reason is if I install Windows7 operating system.

  I bought a CPU on eBay but it does not work when it was inserted. When you turn on the PC, no light illuminates and the system does not start. When you look at the inside of the case of the processor cooling fan works, but that's all. No lights or anything else, not even the fan starts.

  The processor is a Pentium 4 HT 661 SL96H 3.6 GHz 2 MB 800 MHz LGA775

  My system is...

  Compaq Presario SR1339uk

  Serial number: {removed privacy}

  System number: PS267AA

  Motherboard: Asus PTGD1 - LA

  Chipset: I915P Northbridge

  Southbridge ICH6 Intel i/o Controller Hub 6

  BIOS version: 3.28 23/01/06

  Operating system: Windows XP Home Edition 32-bit

  Any help much appreciated... Thank you...

  Sorry for not being clear. I mentioned all processors in HT 6 series like 64-bit processors supported.

• Manual search - when start us research by removing the value manally, same results for future research in the next page.

  Hi guys OAF.

  Created a page of manual search with several buttons below. After entering search criteria and click on the first button, it shows the records in a separate page where I perform trade operations. The second page, I have a "back to the main search" link that takes me to the first page of search.

  Now, if I remove the value of any field of text input by clicking X mark the end of the field, or pressing the button remove the key board and try searching again, same values are to come in the next page as if I did not remove the value.

  Data on the next page is mainly with the help of setWhereClause. And here is the code I wrote.

  public void issueQuery (String OrderNum)

  {

  If ((OrderNum! = null) & & (!("".)) Equals (OrderNum.Trim ()))

  {

  setWhereClause ("ORDER_NUMBER =: 1");

  setWhereClauseParams (null); Always reset

  setWhereClauseParam (0, OrderNum);

  }

  executeQuery();

  }

  Please advice, what has gone wrong or its something Oracle behavior?

  Thank you

  Bideau

  I got the answer, it is resolved after the setwhereclause reset each time.

• limit the number of query results for content Presenter CMIS

  Hi dear,
  
  I have a problem. I added content present on my page in Jdev ide, not at run time. And I need a query including the limitation of the number of results.
  
  My query is: ${' SELECT * from ora: t:IDC:GlobalProfile WHERE the ora: p:xRegionDefinition =-"CSGMNEWS_REGDEF\" ORDER BY ora: p:dInDate DESC'}
  
  
  I just want to add a number parameter.
  
  Can you help me please? How can I limit the number of results?
  
  Kind regards
  
  Yacouba
  
  Published by: erdo on 21.Mar.2013 18:37

  Hello.

  Content Presenter has a setting (maxResults) to set the maximum returned results:

  Sample:
  
  xmlns = "http://xmlns.oracle.com/adf/controller/binding" Refresh 'ifNeeded' = >
  
  
  
  
  
  
  
  

  When you add your CP to a page at design time, you can access the pageDefinition and provide more values for attributes of CP.

  I hope this help you.

  Kind regards.

• Identify the level constarints table in a database

  Hi all
  
  Y at - it any specific query that can help me identify the constraints of level table for oracle 9i database.
  
  Thank you in advace

  Hi Vincent,.

  To list the constraints for all tables in the schema/user.

  Query:

  SELECT TABLE_NAME, CONSTRAINT_NAME,
         DECODE (CONSTRAINT_TYPE,
                 'C', 'Check',
                 'O', 'R/O View',
                 'P', 'Primary',
                 'R', 'Foreign',
                 'U', 'Unique',
                 'V', 'Check view'
                ) CONSTRAINT_TYPE,
         STATUS
    FROM USER_CONSTRAINTS;
  

  Thank you
  Shankar

• Simple question... How do to add pictures on the body of my MAILS found 1000 results for how can I add photos to my Thunderbird emails

  How can simple question - I add photos to my mail body. But instead of the answer - found 1000 results for how can I add photos to my Thunderbird emails. There are answers that don't apply at all to the question anyway. Why must it be so difficult to get a simple answer to a simple question?

  Thunderbird is a bit like Microsoft, all the reasons as I dumped MS Live Mail.

  First, a lot of help for Thunderbird refers to the menus that may not be visible. It would be useful to you and us if you have your menus and toolbars visible.

  http://chrisramsden.vfast.co.UK/13_Menus_in_Thunderbird.html

  Then, open a window of writing. Activate the menu and operate.

  Now that you see an option "Insert"?

  If this isn't the case, you can assign composing in plain text, which does not support embedded images.

  Tools | Account settings| {Select account} | Composition & addressing and ensure "Compose messages in HTML format" are checked. If it is not already checked, go back to writing a message. No better now?

  Once you have the mode of composition HTML goes, you can use Insert | Image or various permutations of copy - paste and drag - move to the body of your message.

  A manual of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

• I can't installed my AI of lightroom j recut in cd error message is "Advisor to identify the problem to support the following problem has been met the instalation n d programe has s could not initialize download Adobe" what I wanted to f

  I can't installed my AI of lightroom j recut the cd en error message is "Advisor to identify the problem to support the following problem has been met the instalation n d programe has s could not initialize download Adobe" what I wanted to do but this programe n exists more so know what to do?

  Please refer to the site link below and try the troubleshooting mentioned:

  https://forums.Adobe.com/thread/1848277

• Identify the Session parameters

  Dear Experts,
  
  How can a DBA, I identify the session level settings. For example, a session changes the initialization of the settings at a session level such as below:
  
  Session 1_
  
  ALTER session set cursor_sharing = force;
  
  Select * from emp where empno = 123;
  
  
  
  and the session preceding is always connected.
  
  Is there a view to watch for the updated initialization settings the?
  
  Thanks for the work on my question.
  
  Concerning

  Oracle Lover3 wrote:
  Dear Experts,

  How can a DBA, I identify the session level settings. For example, a session changes the initialization of the settings at a session level such as below:

  Session 1_

  ALTER session set cursor_sharing = force;

  Select * from emp where empno = 123;

  and the session preceding is always connected.

  Is there a view to watch for the updated initialization settings the?

  As he has already contributed by others to in the session, you can use V$ PARAMETER to find corrupted session parameter values.

  For settings that apply to the optimizer, there are two new modes in Oracle 10 g and later: V$ SYS_OPTIMIZER_ENV and V$ SES_OPTIMIZER_ENV.

  V$ SYS_OPTIMIZER_ENV represents the default values inherited by each session defined by the parameters of the instance.

  V$ SES_OPTIMIZER_ENV displays the current values for each session, including all parameters changed in the session by ALTER SESSION. If this practical perspective can be used to check from outside the session if all relevant parameters for the optimizer have been modified or not.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• In windows XP Home Edition, running MS Office 2007, I get the following error: windows search protocol host has encountered a problem and needs to close

  Every time I have open internet explorer, I get the error message that the research protocol has encountered a problem.

  It occurs intermittently.  MS error report indicates a problem with searchprotocolhost.exe

  How can I fix?:  Anyone know?

  My recommendation, you use Windows XP, uninstall the Windows Desktop Search and never install it again.

  Option 1: In Add/Remove programs with the box checked next to 'Show updates' above checked locate "Windows Desktop Search 4.0" in the list and uninstall/remove it. "
     
  Option 2: If the above fails, you can use this method to remove...
    
  1. click on Start , type cmd.
  2. now, in the result of the research with right-click on cmd.exe and select run as administrator.
  3. type regsvr32 /u "%programfiles%\Windows Desktop Search" and press ENTER.

  For users of Windows XP for most it does, IMO, is slowing down the system.

• How can I use the excpeption address in widows debugging to identify the cause?

  Hello

  I have a windows xp machine crashes randomly.

  I did a debug and wonder how I can identify the driver that is the cause using the exception address.

  Dump below:

  Microsoft (R) debugging Version of Windows 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [E:\Mini072911-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\debug-symboles * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows XP Kernel Version 2600 (Service Pack 3) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 2600.xpsp_sp3_gdr.101209 - 1647
  Computer name:
  Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
  The debugging session: 21:08:37.390 Thu Jul 28 2011 (UTC + 01:00)
  System Uptime: 1 day 11:05:14.187
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .................................................
  Loading user symbols
  Loading unloaded module list
  ..................................................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 1000007E, {c0000005, 874551ad, ba557b04, ba557800}

  Probably caused by: ntkrpamp.exe (nt! KiSwapContext + 2f)

  Follow-up: MachineOwner
  ---------

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
  It is a very common bugcheck.  Usually the PIN address of exception
  the driver/function that caused the problem.  Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003.  This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG.  It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG.  This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: c0000005, the unhandled exception code
  Arg2: 874551ad, the address that the exception occurred at
  Arg3: ba557b04, address of Exception report
  Arg4: ba557800, address of the context record

  Debugging information:
  ------------------

  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The memory could not be '%s '.

  FAULTING_IP:
  + 2f
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]

  EXCEPTION_RECORD: ba557b04-(.exr 0xffffffffba557b04)
  ExceptionAddress: 874551ad
  ExceptionCode: c0000005 (access violation)
  ExceptionFlags: 00000000
  NumberParameters: 2
  Parameter [0]: 00000001
  Parameter [1]: 01000000
  Try to write at the address 01000000

  CONTEXT: ba557800-(.cxr 0xffffffffba557800)
  EAX = 00000000 ebx = 875677d ecx 8 = 00000200 edx = 00000000 esi = 8745bb80 edi = 01000000
  EIP = 874551ad esp = ba557bcc ebp = ba557bd4 iopl = 0 nv up ei pl nz na po nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010202
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]
  Reset the default scope

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: DRIVER_FAULT

  Nom_processus: System

  Error_code: (NTSTATUS) 0xc0000005 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The memory could not be '%s '.

  EXCEPTION_PARAMETER1: 00000001

  EXCEPTION_PARAMETER2: 01000000

  WRITE_ADDRESS: 01000000

  FOLLOWUP_IP:
  NT! KiSwapContext + 2f
  80545a1b 8b2c24 mov ebp, dword ptr [esp]

  FAILED_INSTRUCTION_ADDRESS:
  + 2de2faf01dadfc0
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]

  BUGCHECK_STR: 0X7E

  EXCEPTION_DOESNOT_MATCH_CODE: This indicates a hardware error.
  Instruction to 874551ad does not read/write in 01000000

  LAST_CONTROL_TRANSFER: from 87456682 to 874551ad

  STACK_TEXT:
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  ba557bd4 87456682 01000000 00000000 00000010 0x874551ad
  ba557c00 804ef19f 8ad2dd98 87567768 8ad2dd98 0 x 87456682
  ba557c30 80545a1b ba557c88 00000000 00000000 nt! IopfCallDriver + 0 x 31
  ba557c34 ba557c88 00000000 00000000 00000000 nt! KiSwapContext + 0x2f
  00000000 00000000 00000000 00000000 00000000 0xba557c88

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nt! KiSwapContext + 2f

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrpamp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d00d46f

  STACK_COMMAND: .cxr 0xffffffffba557800; Ko

  FAILURE_BUCKET_ID: 0x7E_CODE_ADDRESS_MISMATCH_BAD_IP_nt! KiSwapContext + 2f

  BUCKET_ID: 0x7E_CODE_ADDRESS_MISMATCH_BAD_IP_nt! KiSwapContext + 2f

  Follow-up: MachineOwner

  See you soon

  KeV

  Hi Kev,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Identify the computer IP addresses

  Hello world

  How to identify individual IP addresses of the computer and confirm my own? How to identify the geographical region/city of the different IP addresses?

  IP addresses seem to have 9 numbers - XX. XX. XX.XXX - Sign these individual computers / connection and country town?

  This is related to the identification of hackers in my e-mail address. I have a report of log on the activity that reveals different IP addresses - please answer the layman that I am a little IT not aware

  Really appreicate your support and your help with this! Thank you very much!

  Philippe

  Hi Philippe,.

  IP addresses have actually 12 numbers - xxx.xxx.xxx.xxx - but they tend to drop the zeros so it can sometimes fool you.  The following may help: http://en.wikipedia.org/wiki/IP_address and/or http://computer.howstuffworks.com/internet/basics/question549.htm.

  To confirm your address, click on start / all programs / accessories / right-click on command prompt, and then click Run as administrator.  Then type IPCONFIG/all and enter.   It will tell you your IP address and much more on your connections.  Remember, unless you use a static IP address to your ISP (usually very unlikely), so you have a dynamically assigned address, which means that it could be different every time you connect or remain the same over a certain period to the ISP of time but eventually change even in this case.  If the IP address of your ISP is something of a moving target and tying someone requires knowledge of the address and the time it has been used (and the cooperation of the ISP for this address to provide more details, which I imagine will be difficult to achieve without a court order or something like that).

  You can find information about the owner of an IP address (address may not be the specific but more probably the range of addresses that includes this specific address) using WHOIS.  Here is a place which provides that: http://tools.whois.net/whoisbyip/.  Here's another option: http://www.whois.sc/.  You can find other just Bing search and grabs 'whois' as a search term and you will have more than you can imagine.

  For geographically locating an IP address, do the following: http://www.geobytes.com/ipLocator.htm?GetLocation.  Here's another option: http://www.ip-adress.com/ip_tracer/.  Other alternatives, search for 'The IP address index' Bing and you'll still find plenty of options.

  If you have an email from pirates, you can optionally use the following to follow them: http://www.ip-adress.com/trace_email/.

  Once you know who owns the block of IP address or the address itself, you can then contact them to see if you can find a more about those specific you interest if you also have the exact dates and at the times that go with them--but I frankly don't think that they will provide you information without a court order.

  In addition, there are there programs that can be used to hide your IP address or send a false IP address and most of the pirates, using such programs, so even if you try to track it down, you can discover that they have covered their tracks with several false IP (sometimes several dozen) of their own IP address real than you see in the emails addresses and try to track down who is formidable , even for professionals.

  I recommend you visit the site next where the Government helps people who have been victims of computer-related crime: http://www.ic3.gov/complaint/default.aspx.

  I hope this helps or at least gives you a head start on your quest.  To be honest, the chances to really find these people without being a hacker yourself or hire a hacker are pretty slim, but you might get lucky and if you decide to report it or get help, the more information you can provide, more opportunities they have to do something.

  Good luck!

• Identify the official gcc (or supported) version for a given version of Labview

  As far as I know, there is no web page OR identify the official (or at least, taken in charge) gcc / g ++ version for a LabVIEW given output.

  By "official version", I mean one that is binary compatible with LabVIEW executable file (i.e. the binary).

  NOR must provide this information (as well as The Mathworks for Matlab). Here, here's a tip for vs information:

  1. the cd in your install directory local labview (i.e. the binary labview where)

  2. type the following command: strings. / labview | grep GLIBCXX

  3. identify the GLIBCXX version (i.e. stdlibc ++) highest in the resulting list (say GLIBCXX_3.4.9 for LabVIEW 13)

  4. open your favorite web browser and visit the gcc ABI policy and guidelines page

  5. search for GLIBCXX identified in step 3 (which is GLIBCXX_3.4.9 in our case)

  6. you should find something like: GCC 4.2.0: GLIBCXX_3.4.9

  7 pray have the corresponding version of gcc (i.e. 4.2.0 here) installed on your host computer or, at least, to have the corresponding manual available for your platform

  8. If step 7 fails, be prepared either: recompile the gcc version required, upgrade your operating system, or update your copy of LabVIEW

  Hello

  It depends on the operating system you are using:

  http://zone.NI.com/reference/en-XX/help/371361G-01/lvhowto/compiling_cin_source/

  For Linux of LabVIEW, you have a list of libstdc ++ supported:

  http://digital.NI.com/public.nsf/allkb/4596349739E988088625761C005B197E

  LabVIEW windows, is Microsoft Visual C++:

  http://www.NI.com/white-paper/3056/en/

  http://digital.NI.com/public.nsf/allkb/6229347C7982CC81862576E30076A4AE?OpenDocument

  If you are using GCC reaaly, there are different workaround solution, withour support:

  http://forums.NI.com/T5/LabVIEW/creating-a-DLL-including-Manager-support-in-MinGW-GCC/TD-p/633123

  Best regards

• How to identify the Basic Tables?

  Hi all
  
  We have a SAP applications running on Oracle 11 g server.
  
  I want to identify the base table being accessible from each page form applications without studying the application code.
  
  I want to know what picture was the data inserted to or comes from.
  
  My strategy is therefore:
  
  1. turn off the cache buffers db, Alter system RAS sqlarea.
  2 identifying the apps as a unique user. No one else allowed to recorded in the applications and the database.
  3. open the desired data entry form/page and encode a record. engage.
  4. check the V$ sqlarea what tables are saved.
  
  Are the steps above accurate or useful? Any other suggestions please...
  
  
  Thank you very much.

  Not necessarily / it depends.
  1 SQL trace is useless after the problem if it has not been activated during the problem
  2. While AWR is sampled, it is rare that only sampled data are not sufficient to provide lighting on an important issue.
  3. unless you do an extended follow-up 10046, sql trace only gives you information on the expectations, etc..
  4 AWR will present a better overview of who does what, blocking sessions etc.

  Your original question around to find all of the tables involved in a call from the app.
  It would be better than awr for it to make a sql trace.

  Published by: Dom Brooks on September 23, 2011 14:16
  Sorry - was talking about ASH not AWR. My mistake.
  If we are talking about AWR then reports using a report at the level of the system to diagnose a problem session or sql is probably not the right approach. See my comment below.

• Library ITunes-how to identify the original track

  I've searched the forums looking for an answer to this and it seems to be the same issue that dates back to 2007, so I guess the first question would be why Apple has not done something, rather than causing me problems whenever they release an update iOS

  OK - rant over! Now, I know there's the possibility of using the "remove duplicates" in the menu, but I had this problem for a while, and when I tried to remove the titles before, I got a warning message telling me that I was going to delete the original - so, how do I find which of the indicated path is the original?

  Now, I have six or seven copies of each track and suspect that this happened since a previous update changed my settings and deleted something that stopped the tracks are copied back to the devices in iTunes.

  Has anyone found a way to identify the original track so that I can remove all duplicates?

  Thank you very much.

  You can find this thread (and the links in the responses) interesting:

  I downloaed The vaccine and now I have each track duplicated on my library. How can I get rid of duplicate songs?