Identity of the ACS creation of store

Similar Questions

• Configuration of multiple Sources of identity in the politics of identity (ACS 5.3)

  Hello

  I have a 5.3 ACS cluster that is configured to use AD. There are a few features wireless and control tools that have no AD accounts. I would like to configure ACS to check first AD for the authentication of the user, and if that fails to derail the local identity source (internal users) where I can set these user accounts.

  It seems that when authentication hits the rule of the order of the initial identity, he never moves to the next if the first fails.

  Fasteners are screenshots that show how I'm set up for the test, I have a defined local user and I'm trying to log in to the firewall.

  -Identity definition: screenshot of the definition of main ACS for the rule that I test that does not

  -Identity rule 1: the configuration of the rule 1, that if she doesn't need to go to rule 2.

  -Log Output: Screenshot for one of the attempts failed since the ACS server view log.

  Reason why I need to set it up this way is:

  -Authenticate users wireless using AD user accounts. Some portable scanners do not support only and will have to authenticate by using the MAC address.

  -L' authentication for managing network devices use the AD accounts. We have monitoring tools that have no AD accounts and must be able to connect to network devices to issue certain commands (examples: first Cisco LMS and NCS, Infoblox NetMRI).

  Any suggestions on how to get this set up?

  Thank you

  Sami Abunasser

  The reason why the current definition does not work is because it is the condition even in the two rules in the policy. Once a condition corresponds to a policy, that he will not move to any subsequent regulations in politics. It's a first match policy.

  How to solve this problem is to use a sequence of identity.

  A sequence of identity can hunt through a series of databases that is the username and authentication can be performed

  To do this for the above scenario as follows:

  -Users and identity stores > sequence identity store

  -Create a sequence of identity. Select the solution "based on the password" then in "authentication and recovery research list of attributes" first AD1, then «internal users»»»

  This sequence of identity can now be selected as the result in the rule of identity strategy

• "Not responding" message at the beginning upward. SOLVED by the creation of a new identity & import the messages from the old to the new.

  This only happens on one of my identities, the rest seems to agree...

  When I start this identity, it's really slow & as soon as I click on anything it says "not responding".

  After some time (about 10 min.), he will finally do something but, after a few clicks he strikes again.

  8.1 Windows, IE 11, new software Thunderbird

  While I appreciated the responses, I have completely abandoned after my last post that with the two security modes by running this identity still did not...

  I found myself fixing by find and save the messages of this identity, creating a new identity folder and import the messages from the old to the new.
  And then deleting the old identity in the list.

  users /(your username)/AppData/Local/Thunderbird/Profiles

• 802. 1 x with the ACS and Windows AD

  Hello

  Im trying to configure 802. 1 x with ACS 5.2 but I am wrong as his very differnet ACS 4.2.

  I installed the ACS for the field and think that I installed the external Idnetity store, however when I try to authenticate a pc using probable authentication "PEAP (EAP-MSCHAPv2), I get a reason for failure 22056 object was not found in the store there is identity.

  Marco

  Hi Marco,.

  I guess you missed a mapping configuration in the Section of access policy.

  Create an Access Service name AS-802. 1 x select user select the Service Type, and select network access. Select the identity of political Structure and authorization. Select PEAP as the authorized Protocol. Click on finish

  You will see the new service click on identity.

  Select the source of the identity you have created, then save.

  Click permission

  Select an access permission by default authorization rule and save.

  Create a Service access rule name 802. 1 x

  Select the Protocol Radius as a Condition and as a compound Condition select RADIUS - IETF:Service - Type match box, then select the service that you created before.

  then you can try again.

  concerning

  Alex

• Configure the ACS 5.1 device to connect to the AD

  Pls advise.

  This is a new installation. I had to configure the ACS to connect to the ad to authenticate users and retrieve user information for the group as a result of step mapping.

  Go to the users and identity stores > external identity stores > Active Directory and enter the domain name

  appoint and give a name of user and password which will allow to connect to the domain. Then, click Test connection to validate join them the domain.

  I got successful connection test. But when I click on save changes. I got error.

  How has the problem been resolved?

  

  Best regards

  Boonkiat

  It can be many things.

  DCs how do you have in your area? They are all accessible by the ACS?

  You return the SRV records for your ad?

• 5.2 of the ACS and Cisco ACE RBAC does not...

  Would be grateful for help here if it can be provided.

  I am configuring GANYMEDE auth for a Cisco ACE through our 5.2 ACS server. I think that I installed everything correctly but when I connect with my GANYMEDE account it gives me only monitor network privileges.

  This is the Configuration of ACE, I use:

  XXXXXXXX, host 1.1.1.1 key radius-server

  XXXXXXXX, host 2.2.2.2 key radius-server

  RADIUS-server timeout 10

  RADIUS-server deadtime 30

  !

  AAA group Ganymede Server + ACS

  Server 1.1.1.1

  2.2.2.2 Server

  output

  !

  AAA authentication login default group local ACS

  AAA authentication login console Group local ACS

  Default accounting AAA group ACS

  !

  This is the Configuration of the ACS:

  

  When I connect to the ACE I see authenticating and pulling the right group of the ACS journal:

  Connected to the ACS status details user peripheral name server device name group Service identity store identity network access group

  Apr 8:57:40.566 30.13 AM xxxckxxx

  AFA-ACE-internal

  Device Type: all device Types: load balance devices, network, location: Cameron Enterprises: Oklahoma: Data Center - 1 unit Access.TACACS

  AD1 all groups: administrator - full HAPP-CSACS

  Apr 8:52:20.256 30.13 AM xxxckxxx

  AFA-ACE-internal

  Device Type: all device Types: load balance devices, network, location: Cameron Enterprises: Oklahoma: Data Center - 1 unit Access.TACACS

  AD1 all groups: administrator - full xxx movies

  Apr 8:43:43.276 30.13 AM xxxckxxx

  AFA-ACE-internal

  Device Type: all device Types: load balance devices, network, location: Cameron Enterprises: Oklahoma: Data Center - 1 unit Access.TACACS

  AD1 all groups: administrator - full xxx movies

  But when I log in AS and do a show users that I get:

  * xxxckxxx Dev_VC pts/2 Apr 30 09:57 (x.x.x.x) monitor-network-default domain

  I've searched for days to find a solution for this with no luck. Any help would be greatly appreciated.

  Thank you.

  Well, it should work effectively at the same time.

  Could you please check the GANYMEDE of ACS logs and check the newspaper correct PROFILE of SHELL (Shell Administrator profile-material) are selected.

  This can be checked by virtue:

  Monitoring & reports >

  Reports >

  Catalog >

  AAA Protocol > authorization Ganymede

  They provide an output of

  Field of Show running-config

  Would appreciate if you can share the result here.

  Jatin kone

  -Does the rate of useful messages-

• Failure of the ACS migration tool

  Hi, I am running the migration tool, the following request:

  Make sure that the database is running.

  ACS DB 4.x is unavailable, enter ACS 4.x database password (encrypted)

  :[******]

  With the password of database simple, used during the installation of the ACS, I get a fatal error at the end of the procedure like this: "Fatal Error! -Unable to connect to ACS 4.x DB! »

  Where can I find the password for the encrypted database ACS?

  After the migration log:

  07/10/2011-11:41:31 MigrationApplicationCLI.getUserInformation (MigrationApplicationCLI.java:953) ERROR - not read invoke ACS 4 password system. Error on line C:\Work\ACS5x\ccweb_views\dgash_acs5_0_lenovo\vob\nm_acs\acs\mgmt\migration\DbPassword\Password.c 1265, calle API

  07/10/2011-11:46:52 MigrationApplicationCLI.getUserInformation (MigrationApplicationCLI.java:953) ERROR - not read invoke ACS 4 password system. Error on line C:\Work\ACS5x\ccweb_views\dgash_acs5_0_lenovo\vob\nm_acs\acs\mgmt\migration\DbPassword\Password.c 1265, calle API

  07/10/2011-11:58:08 JavaUtils.isAttachmentSupported(JavaUtils.java:1308) WARN - cannot find the required classes (javax.activation.DataHandler and javax.mail.internet.MimeMultipart). Attachment support is disabled.

  07/10/2011-11:58:28 ACS4Connector.checkDBConnectivity (ACS4Connector.java:137) FATAL - Fatal Error! -Unable to connect to ACS 4.x DB!

  java.sql.SQLException: [Sybase] [ODBC driver] [Adaptive Server Anywhere] ID invalid user or password

  at ianywhere.ml.jdbcodbc.IDriver.makeODBCConnection (Native Method)

  at ianywhere.ml.jdbcodbc.IDriver.connect(IDriver.java:354)

  at java.sql.DriverManager.getConnection (unknown Source)

  at java.sql.DriverManager.getConnection (unknown Source)

  at com.cisco.nm.acs.mgmt.migration.ACS4Connector.getConnecter(ACS4Connector.java:66)

  at com.cisco.nm.acs.mgmt.migration.ACS4Connector.checkDBConnectivity(ACS4Connector.java:133)

  at com.cisco.nm.acs.mgmt.migration.MigrationApplicationCLI.runExport(MigrationApplicationCLI.java:605)

  at com.cisco.nm.acs.mgmt.migration.MigrationApplicationCLI.main(MigrationApplicationCLI.java:266)

  I use the migration on a VMware machine clone tool, from the console.

  Thanks in advance

  Creation date: November 8, 2011 14:47 created by: James, Edward C(EDWJAMES,338460) migrating the 4.x to 5.x database

• Access to the ACS SPECIFIC group router

  I want allows you to control access to all of our routers and switches Cisco GANYMEDE. I have a Cisco ACS device that can be used for centralized management accounts of the engineer. The ACS server, however, also used to store our business users VPN accounts.

  Can I restrict access to routers and switches only to users in the Group of engineers on the ACS server?

  Hello

  If you use ACS 4.x, limiting access through Restrictions on access network (NARS) could help you:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_tech_note09186a0080858d3c.shtml

  I would like to know if this helps, or alternatively if you use DCC 5 (in which case the scenario is a little different).

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Windows domain account to view reports / manage the ACS server.

  All,

  We have a Cisco ACS 5.2 deployment (device).  It has existing integration with Active Directory.  We use it with RADIUS to authenticate our users wireless and GANYMEDE to manage our network equipment.

  RAY reports are useful for other teams (except my own) in order to resolve account lockouts and password (everyone forgets to change the password on his phone).

  I would like to allow this team and other access to the report of RADIUS authentications.

  I want them to be able to use their domain account to do this.<-------  this="" is="" mandatory,="" based="" on="" our="" security="">

  We tried using an account local and which works very well.

  My system tells me that domain accounts cannot access the administrative parts of ACS.

  Is this true?

  We have the support to allow us to upgrade to the latest version of the ACS.

  5.4 of the ACS, it is possible to authenticate and authorize the directors of external stores, including AD accounts

• 5.3 of the ACS cannot work with two rules of service strategy

  Hello my name is Ivan

  I have a question about ACS v5.3 appliance.

  I have a v 5.3 ACS wo authenticate users wireless, as well as a cisco wlc. A profile is to business users and the second profile is invited.

  Business users must authenticate with Active Directory and the guest with WLC. Guest users to authenticate with the local database of GBA.

  I have set up two service political selection that correspond with the Radius protocol. The first rule is for users to Active Directory and the second is for users in

  the local database of ACS.

  When I try to authenticate users with active directory is OK, but when trying to authenticate users with the local database (Portal comments) GBA was trying to find the

  internal user in Active Directory, because math the first rule and the second profile cannot authenticate.

  When I change the order, first of all the State of users internal and second rule of users from Active Directory, internal users can authenticate in ACS, but

  in Active Directory users cannot authenticate.

  I think that my ACS authenticate only the first rule of the RADIUS to the Active Directory, not two rules of RADIUS at the same time. Or maybe there is a problem in the BONE of the ACS.

  Authentication separately is OK.

  Please could you help me to resolv this problem?

  I enclose my two rules

  Concerning

  Hello Ivan,.

  To solve your problem, you must configure your ACS so that the first selection policy (active directory) corresponds to only for users of the company and the other strategy of selection service (internal users) does not match.

  The second strategy selection of service must be only for guest users.

  If you use Cisco WLCs, it will be easier for you.

  Why?

  Because you can use 'End Station filter' easier to match the SSID.

  In feature selection policy, you build your game to the fine filter station (add it via the Customize button).

  Now, you must create two filters of end station, one is the ssid of comments and one corresponds to the ssid company. (tell how to create later)

  After you create the filter end station and match the selection policy of end station filter function, you have a political service selection matches corporate only guest SSID and other SSP the SSID matches.

  Now you can select different identity for the two SSP sources.

  Now for the filter end of station:

  End station filter is used (in our case) to distinguish the SSID.
  If I want to separate applications of different SSID, I use the end station filter to match what SSID I use.
  cretae end station filter to your SSID, follow the following image:

  

  on point number 4, write resounding brand (*) asteristk of your SSiD (case-sensitive), without spaces. Be sure to avoid spaces before or after.

  (I assume you are using cisco WLC. If not, the idea cannot be applied the way I described above).

  So far, we're OK, except one point. The default SSID guest is not sent by the Cisco WLC to the radius server when the client tries to connect to it, while the SSID of 802. 1 x is.

  To say the WLC to send the guest SSID, you must add this command to the WLC:

  RADIUS config callstationidtype ap-macaddr-ssid

  I hope I described correctly. Let me know if you got it or if you need more explanation.

  Greetings,

  Amjad

  Rating of useful answers is more useful to say "thank you".

• Deleting files from Archive CC - cannot remove the mobile creation error

  I am trying to clean my cloud storage because I have reached my limits, but it does not remove anything without having the error "failed to remove the mobile creation."  I get this error regardless of what file I'm trying to delete.  I don't know what it is or how to fix for free space on my drive of cloud.  Help, please!

  @nicoleb16277652 - you have a large number of items in the Archive tohttps://assets.adobe.com/files?filter=archive https://assets.adobe.com/files?filter=archive: 2355 files and 1 folder. I am currently getting a list of complete metadata that you have stored but didn't notice the Lightroom Catalog files. You should not use the current CC site for backup Lightroom catalogs.

  We can permanently delete all items in your Archive if that's what you want. Let us know what you would have done as. If necessary I can you email a complete list of what you have stored. My email is [email protected].

  Lightroom and Creative Cloud FAQ at https://helpx.adobe.com/lightroom/kb/lightroom-creative-cloud-faq.html#id_9994

  Can I keep my Lightroom Catalog in the 20 GB of storage space do I get with my membership creative cloud?

  No, you cannot store the Lightroom catalogs in the creative cloud, and you can save a Lightroom catalog on a network drive. You must store the Lightroom catalogs on your computer or on a hard drive connected locally.

• "cannot be opened because the identity of the sponsor cannot be confirmed" [was: after trying to...]

  After putting in my redemption code...

  I get this message

  'cannot be opened because the identity of the sponsor cannot be confirmed.

  Your security preferences allowing installation of only the applications from the Mac App Store and identified the developers

  Temporarily bypass Apple Gatekeeper to allow your Adobe software must be installed

  Error 'was not signed by a recognized distributor | Launch of Adobe applications. Mac OS

• First PRO CC 2014 closes after the launch, it happens after the selection / creation of a new project, the main interface is displayed for a few seconds, then everything disappears.

  Install the 30 day trial version, but first PRO CC 2014 closes after the launch, it happens after the selection / creation of a new project, the main interface is displayed for a few seconds, then everything disappears. How to fix?

  Hello

  Go to c: program files * 86:common: adobe: sl hide, rename the cache sl

  Go to c: program data: adobe: store sl: rename the store sl sl old store.

  Right click on first pro and run as admin.

  Thank you

  Arjun

• In Photos, by pressing "buy the book" returns "unavailable store."

  I carefully put in place a photo book, but when I try to 'buy the book', I get a message "store not available" which reads: "the store is currently down for updates. We'll be back soon. »

  I restarted my laptop, check the Photos updates and connected several times in pictures > printing product store account, confirming my billing and shipping information in "your account".

  Help! I need this photo book to arrive in time for a birthday!

  I am located in the United States.

  Today, it is a great event Apple (Apple Events - Keynote September 2016 - Apple) and many store services are declining in preparation for the new products.

  The system status page is the "Multiple service maintenance store" list.

  See: http://www.apple.com/support/systemstatus/

  I wait until the presentation of tonight happened and try again later.

  If it is very, very urgent and you cannot wait until tomorrow, save your book in PDF preview and the printed by a different print service, for example Presto Photo: https://www.prestophoto.com/create/iphoto-aperture-book-printing

• iPod Touch 5th generation "cannot verify the identity of the server.

  My school requires a log-in for which you have to go to in order to access the wifi. So first you log through settings, then you go to safari and search for a random page, and then the window should appear. However whenever I try to do, I still get the same message:

  "Safari cannot verify the identity of the server.

  Or something like that. Anywho, I tried to change my dates and times. I also tried to reset my network settings. My iPod is able to connect to anything but the school wifi, but all my friends who have iPhones and androids are able to connect and it begins to get really frustating. Please help me because I don't want to go to another 3 years without wifi at school.

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset network settings

  Go to settings > general > Reset and tap reset network settings. You will have to join all the wifi networks

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  iOS: how to save

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.