iDRAC7 and SAN certificates

Similar Questions

• Teradici 4.0 firmware and SAN certificates

  Use a SAN cert on my servers connection that has on the entrances to SAN a dozen without problems on zero clients with 3.51 firmware, but after upgrading to one of the clients to 4.0 firmware, I now get a warning indicating that the certificate is not trusted, and I see not what follows in the zero client connects :

  20/05/2012, 09:12:19 > RC LVL:3: 0 MGMT_SYS: (ui_cback): event: 43
  20/05/2012, 09:12:19 > RC LVL:1:-505 X509_UTIL: x509_util_subject_alternative_name_cback: SAN buffer is full
  20/05/2012, 09:12:19 > RC LVL:1:-505 X509_UTIL: x509_util_subject_alternative_name_cback: SAN buffer is full
  20/05/2012, 09:12:19 > RC LVL:1:-505 X509_UTIL: x509_util_subject_alternative_name_cback: SAN buffer is full
  20/05/2012, 09:12:19 > RC LVL:1:-505 X509_UTIL: x509_util_subject_alternative_name_cback: SAN buffer is full
  20/05/2012, 09:12:19 > RC LVL:1:-505 X509_UTIL: x509_util_subject_alternative_name_cback: SAN buffer is full
  20/05/2012, 09:12:19 > RC LVL:1:-505 X509_UTIL: x509_util_subject_alternative_name_cback: SAN buffer is full
  20/05/2012, 09:12:19 > LVL:1 RC:xFFFFE8E6 MGMT_SSL: ocsp_http_query: remapping error at ERR_OCSP_RESPONDER_CONNECT_FAILED
  20/05/2012, 09:12:19 > LVL:1 RC:xFFFFC552 MGMT_SSL: mgmt_ssl_certificate_revocation_test: mgmt_ssl_ocsp_validate_certificate() failed: unknown error
  20/05/2012, 09:12:19 > LVL:2 RC: MGMT_VDMCSI-500: warn the default display mode: certificate of VCS responds WoVD no exception of root of trust

  I have an open ticket with Teradici (nine days) and still no reply from them, other than a ticket status of ' Work in Progress '. Anyone else see a problem with the 4.0 firmware and CERT with multiple SAN entries?

  Thank you

  
  Geoff

  Had the same problem with our Digicert wildcard

  I downloaded the intermediate cert as a .pem only through a new profile and psuhed on some P20 test - all good

  The Digicert called Digicert High Assurance CA-3

  

  

• IPad Client for View 5 supports Subject Alternative Name (SAN) certificates?

  Does anyone know if the iPad App to see 5.0 Update for subject alternative name (SAN) certificates?  I tested a SAN certificate on a view Security Server 5.0, and it worked great for all the FQDN in the certificate when you use the view Windows 5.0-based Client.  However, when I try to connect using the iPad App, it seems to trust only the common name (CN) rather than additional complete domain names in the SAN certificate.  The nice thing about SAN certificates is that you can buy 1 certificate with a whole bunch of domain names and use the same certificate on multiple servers.  But this seems to break the view iPad customer.  Can anyone confirm that this is a limiation of the iPad App?  This should be corrected in a future release?  Or are we stuck buying individual certificates for each of our servers?

  I had this same problem.  I get mine from DigiCert, and they offer duplicate certificates.  I had a duplicate with my FQDN View Manager like CN first and installed.  After that, I was able to use it on the iPad.

• Performance on the Web access and the certificate problem arises

  Hello! I just bought a HP pro 8610 office jet and I'm trying to access the Scan function to access Web but performance is very slow and I just get a blank screen, no certificate appears.   I tried to do it in Chrome and Firefox.  Otherwise, the printer works fine.

  I accidentally entered a wrong email as beneficiaries on the address book and need to delete an entry via the Scan option in the Web.

  I'm on Windows 7 Edition home premium.

  Please advise, thank you!

  This has been resolved! Apparently the connection was slow for some reason any.  Just tried again this morning and the certificate that is presented and not more problems.  Thank you!

• has been able to play gta vice city and san andras and now I changed the frm windows XP to 7. but now I'm not able to play another game

  original title: card__ graphic

  I was able to play gta vice city and san andras and now I changed the frm windows XP to 7. but now I'm not able to play any other game m .is it probkem of bone or my graphics card?

  -----------------

• ASM and SAN issues HQ

  Hello

  I have a few problems in ASM 4.6 and SAN HQ 3.0.

  SAN AC 3.0:
  I get alerts email saying that network connectivity is not even if there is no network connectivity issues.  The message is below:

  • [ID: 14.2] A connection could not be made.
  • The HQ SAN server issued the group SNMP requests, some or all failed.  This condition is probably due to the congestion of the network or has no network connectivity.  The server will try again in 60 seconds.  Check your network connectivity and that the storage group is online.  If the problem persists, contact your Dell support provider.

  ASM 4.6:
  For some reason when ASM is refreshing the host, it never ends with one of the hosts (in a cluster).  It sticks to the discovery of Cluster connectivity and I don't understand why.  I also get e-mail alerts saying that Smart snapshots failed.

  Can someone please?

  Thank you.

  There SANHQ available from eqlsupport.dell.com/.../download.aspx 3.0.1

  From the release notes:

  Elements fixed in SAN HQ Version 3.0.1

  The following question has been corrected in the version 3.0.1 SAN headquarters maintenance release:

  Previously, after SAN HQ 3.0 upgrade HQ SAN server could not connect to the newsgroups under firmware version 7 or more and SAN HQ has published an alert (HQ SAN event ID: 14.2) indicating that some or all SNMP requests the group failed.

  This condition is resolved.

• But intermediaries 1.2 root and server certificate

  Hello world

  I tried to renew the cert on ASA and I got 4 certificates from the seller

  Intermediate1 and 2

  Root cert

  Server Cert

  Server certificate is for ASA operating as VPN, what is the purpose of the other certs and where should I install them?

  Concerning

  Mahesh

  Hello Manu,

  You need to install the intermediate and the certificate root under certificates of CA on the ASDM.

  And the certificate of the server has installed under the certificate of identity section.

  After that, you need to replace the old trustpoint on SSL of the SAA with the new interface.

  I have attached the screenshots as well.

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Connect FI two directly attach FCoE storage and SAN switches

  Nobody tells me if I can connect FI two directly attach FCoE and SAN storage switches also, as you can see in the diagram of connected network?

  If so, should I FC Switch function Mode? Any concerns should I consider?

  Or the best solution would be appreciated. Thanks in advance.

  The UCS will be in Switch Mode FC, which means that it has a default area.  We cannot make a Zone merge with Brocade because we have no control to set up specific items such as domain and other articles CF IDS that need to be changed when you connect a Cisco FC switch to a Brocade.

  Usually in this situation with a 5 k or a MDS you might be placed in mode of interoperability, which changes the default settings and we will talk to them together - in this case, you can't change these settings, so the only supported configuration is CF Cisco at Cisco.

  See you soon,.

  Greg Scarlett.

• ISE Local certificate and the certificates in the certificate store

  Hello

  I'm pretty new to ISE and read the document in the link below to create understanding "Local certificates" and "certificate store certificates. It seems that in the former certificate is used to identify the EHT on customers and is later used to identify customers at the ISE.

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-2/installation_guide...

  Now, what part of the ISE configuration told him to check the certificate sent by the client in its certificate store? I am somehow the mixture up with "Certificate authentication Profile", which is used in the identity Source sequence. But I guess that the certificate authentication profile is used to verify the certificates from a source of external identity as AD or LDAP. So where do we consider 'certificate certificate store' in our configuration of ISE.

  Thanks in advance for help out me.

  Kind regards

  Quesnel

  Hi Quesnel-

  (ISE) server certificate can be used for are:

  1 HTTP/HTTPs - is for the ISE web server that is used to host various portals (comments, Sponsor, BYOYD, my devices, etc.). This certificate is normally issued by a public CA such as VeriSign or GoDaddy. A public certification authority is not necessary, but outside your environment, customers who do not trust the certification authority that issued the certificate will get an error HTTPs warning to users that the certificate could not be verified.

  2 EAP - this is for EAP based authentication (EAP - TLS, EAP-PEAP, EAP-PEAP-TLS, etc.). This certificate is usually issued by an internal CA. The same certification authority issues usually user and/or computer-based certificates that can be used for the authentication type EAP - TLS.

  The certificate store is used to store root certificates and intermediate certificate authorities you ISE to trust. By example, if a computer is running a machine ISE authentication must trust the certification authority who has signed/issued the machine certificate. Therefore, the machine will also have to trust the certification authority which has issued/signed the ISE server certificate that you torque to the EAP process.

  Profile of teh authentication certificate is required if you want to use certificate based authentication. The CAPE tells ISE which attribute of the certificate should be used for the usernmane. Then based on that you can create more specific authorization profiles/rules information. You can also configure CAP to make a comparison of binary certificate with AD and confirm wheather or not the certificate is/has been published to AD.

  I hope this helps!

  Thank you for evaluating useful messages!

• A .cab file that is necessary for the installation can not be trusted. Please check Cryptographic Services are enabled and the certificate file is valid. »

  OT: URGENT HELP!

  Hi, I searched ALL the DirectX solutions and yet he's just not going to download! I just want to play Gmod but I need DirectX 11. Whenever I try to download DirectX it says 'a necessary .cab file for installation can not trust. Please check Cryptographic Services are enabled and the certificate file is valid. "I have my encryption services activated, but it STILL refuses to download. -HELP-

  Hello

  I'm sure that DX11 is already a part of win 8...

  Maybe what you really need...

  DirectX Runtime June 2010, which is an optional update that needs a lot of games.

  Even my Lexmark printer requires... I'll include a link to the full installer...

  This is a package to free extraction. It will extract after double-clicking it so be sure to note the location where extracted you\it.

  Open the folder, and then double-click DXSETUP.

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

• create a digital identity and signature certificates approved as well as creation and appearance preferences.

  How to create a digital signature from the identity and approved certificates area, but they use the image of my real signature rather than the suburbs generated text? It would be combining all upward for the certificates and the creation and appearance options.

  Signing and trust certificates are generally different. Signing certificates are digital IDs and trust under certificates of trust. Although you can add a certificate to the signature of the certificate trust and there are cases where this is recommended, so that you will be able to use a certificate for signing (with key private and public) you must include it in the digital IDs. Most certificate in the approved identities have only the public key. Certificate without the private key cannot be used for signing.

• How to check latency between the ESX host and SAN

  How to check latency between the ESXi host and SAN

  Hi friend

  Below KB will solve your need:

  VMware KB: Using esxtop to identify problems of performance of storage to ESX / ESXi (several versions)

  Under discussion can help you get more insight:

  Best values LVAD/cmd (ESXTOP)?

  Learn ESXTOP @ latency:

  vCenter and Esxtop to storage i/o bottlenecks to avoid

  Very detailed blog on ESXTOP:

  http://www.yellow-bricks.com/ESXTOP/

• a few questions about ESXi and SAN CF with HP P2000 G3

  Hello everyone!

  I am new to ESXi and SAN, then I need help for her.

  I have Encolosure C7000 system with 4 blades BL460c already installed ESXi 5.1U1 (HP custome ISO image). Everything works fine now, but I do not understand something:

  -What is the management network which I use vSphare Client to connect to? It is a private network to manage ESXi servers what difference with VMnetwork used by Virtual Machines? Because I've set up an IP address for this connection manually, but it is of course separate with IP addresses, I used on Virtual Machines.

  -If my system has problem, so I have to reinstall ESXi, license keys can be used again? Already, I have 8 license key for 4 blades (2 CPUs per server), but they have not yet used. Because I am new to ESXi, cause I had to reinstall ESXi several times to understand.

  -When I install successful ESXi, I don't know how to start working with SAN. What should I configure P2000 before it be plugged into the SAN switch? Or I can plug it then config later? Because I don't see it on the ESXi server. And on the OS I installed on the Guest Virtual Machines, I see nothing new in Device Manager. I thought that this guest operating system will detect the mezzanine card. But I see only mezzanine card that connect to the P2000 by SAN switch in ESXi (see image here http://img203.imageshack.us/img203/684/dsc04088k.jpg ). To my knowledge, I think that ESXi server have to detect the P2000 as hardware device. Can someone teach me step by step install and configure a San on ESXi? Or show me a tutorial because I searched but only iSCSI results.

  My devices:

  01 7.1 HP BLc7000 CTO 3 IN LCD ROHS Encl.

  04 BL460c G8 servers HP FlexFabric 8.5 10 Gb 2 p 554FLB FIO blade adapter

  02 7.3 HP B-series 8/12 c BladeSystem SAN Switch

  01 HP P2000 G3 MSA FC Dual Controller

  Thanks for any help, sugession or comment!

  -What is the management network which I use vSphare Client to connect to? It is a private network to manage ESXi servers what difference with VMnetwork used by Virtual Machines? Because I've set up an IP address for this connection manually, but it is of course separate with IP addresses, I used on Virtual Machines.

  Yes, it's a separate network used only for traffic management between ESXi hosts and vCenter - it is also the network used to connect to the environment - that's different, then the network used by your virtual machines

  -If my system has problem, so I have to reinstall ESXi, license keys can be used again? Already, I have 8 license key for 4 blades (2 CPUs per server), but they have not yet used. Because I am new to ESXi, cause I had to reinstall ESXi several times to understand.

  Yes the license keys can be reused, and if you use vCenter licenses will be managed by vCenter

  -When I install successful ESXi, I don't know how to start working with SAN. What should I configure P2000 before it be plugged into the SAN switch? Or I can plug it then config later? Because I don't see it on the ESXi server. And on the OS I installed on the Guest Virtual Machines, I see nothing new in Device Manager. I thought that this guest operating system will detect the mezzanine card. But I see only mezzanine card that connect to the P2000 by SAN switch in ESXi (see image here http://img203.imageshack.us/img203/684/dsc04088k.jpg ). To my knowledge, I think that ESXi server have to detect the P2000 as hardware device. Can someone teach me step by step install and configure a San on ESXi? Or show me a tutorial because I searched but only iSCSI results.

  Yes, you will be able to configure the San later - by default, the virtual machine will not see the SAn, as it is virtualized by your ESXi host - all the VM will see is a virtual SCSi disk - this doc's guide to vmware for storage - http://pubs.vmware.com/vsphere-51/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-511-storage-guide.pdf - you can visit the website of HP they might have documentation on configuring P2000 for vSphere -.

• HA and SAN traffic on dedicated NIC port

  Hello

  We have a small vmware network 2 HP servers and a SAN. We buy ESS Vsphere with HA.

  If I understand correctly, it is considered preferable for HA and SAN traffic on a port on the network adapter.

  What I need is help with how to implement that.

  We will have 2 spare nic per server ports dedicate to this, one for HA and one for SAN traffic.

  Currently, we use 2 ports per server in swarming mode connected to a subnet and two ports more connected to another subnet, for a total of 4 ports per server. We will buy a 6 port of HP network card very soon, it is most important that they do for our DL 365 HP. This will give us the extra 2 ports per server, to devote to SAN and HA traffic.

  OR should we just use the spare ports 2 Teemed in the SAN and forget to devote to the HA.

  Thank you!!!

  Peter

  HA the traffic runs on the service console / management network. It is advisable to separate, but it is not a must. I will say if you don't have enough NIC to use the grouping of network cards to introduce redundancy, it is more important than anything else, when you run HA.

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• How to find and remove certificates in iOS9

  Hello world

  I just download an App 'VPN Master' and connect to the USA server, app install a certificate from profile in my iOS system, after checking the app, delete them, but I can not find the certificate in my phone. Does not appear any profile to remove.

  Fur I have more than one.

  How do I find and remove any certificate installed in my device?

  Thanks in advance

  Try the procedure described in this article:

  http://www.IMore.com/how-remove-root-certificates-your-iPhone-or-iPad