Teradici 4.0 firmware and SAN certificates

Similar Questions

• iDRAC7 and SAN certificates

  SAN certificates (another name of the topic) are supported on iDRAC7 with 1.57.57 firmware?

  Stephens,

  Yes the iDrac7 supports Subject Alternative name certificates, but you must be certain that the IP address that you specify in the iDrac must match the Subject Alternative Name field of your domain controller certificate if you have enabled certificate validation.

  Ask yourself following a problem that you are experiencing? Let me know and we can try to get the problem resolved. Otherwise, I hope this helps answer your question.

• ASM and SAN issues HQ

  Hello

  I have a few problems in ASM 4.6 and SAN HQ 3.0.

  SAN AC 3.0:
  I get alerts email saying that network connectivity is not even if there is no network connectivity issues.  The message is below:

  • [ID: 14.2] A connection could not be made.
  • The HQ SAN server issued the group SNMP requests, some or all failed.  This condition is probably due to the congestion of the network or has no network connectivity.  The server will try again in 60 seconds.  Check your network connectivity and that the storage group is online.  If the problem persists, contact your Dell support provider.

  ASM 4.6:
  For some reason when ASM is refreshing the host, it never ends with one of the hosts (in a cluster).  It sticks to the discovery of Cluster connectivity and I don't understand why.  I also get e-mail alerts saying that Smart snapshots failed.

  Can someone please?

  Thank you.

  There SANHQ available from eqlsupport.dell.com/.../download.aspx 3.0.1

  From the release notes:

  Elements fixed in SAN HQ Version 3.0.1

  The following question has been corrected in the version 3.0.1 SAN headquarters maintenance release:

  Previously, after SAN HQ 3.0 upgrade HQ SAN server could not connect to the newsgroups under firmware version 7 or more and SAN HQ has published an alert (HQ SAN event ID: 14.2) indicating that some or all SNMP requests the group failed.

  This condition is resolved.

• IPad Client for View 5 supports Subject Alternative Name (SAN) certificates?

  Does anyone know if the iPad App to see 5.0 Update for subject alternative name (SAN) certificates?  I tested a SAN certificate on a view Security Server 5.0, and it worked great for all the FQDN in the certificate when you use the view Windows 5.0-based Client.  However, when I try to connect using the iPad App, it seems to trust only the common name (CN) rather than additional complete domain names in the SAN certificate.  The nice thing about SAN certificates is that you can buy 1 certificate with a whole bunch of domain names and use the same certificate on multiple servers.  But this seems to break the view iPad customer.  Can anyone confirm that this is a limiation of the iPad App?  This should be corrected in a future release?  Or are we stuck buying individual certificates for each of our servers?

  I had this same problem.  I get mine from DigiCert, and they offer duplicate certificates.  I had a duplicate with my FQDN View Manager like CN first and installed.  After that, I was able to use it on the iPad.

• Performance on the Web access and the certificate problem arises

  Hello! I just bought a HP pro 8610 office jet and I'm trying to access the Scan function to access Web but performance is very slow and I just get a blank screen, no certificate appears.   I tried to do it in Chrome and Firefox.  Otherwise, the printer works fine.

  I accidentally entered a wrong email as beneficiaries on the address book and need to delete an entry via the Scan option in the Web.

  I'm on Windows 7 Edition home premium.

  Please advise, thank you!

  This has been resolved! Apparently the connection was slow for some reason any.  Just tried again this morning and the certificate that is presented and not more problems.  Thank you!

• Deletion of dd - wrt firmware and restore to factory State

  Hi, I have a Nighthawk R8000 I bought with DD - Wrt firmware. I would like to remove this firmware and restore a factory setting. I could have messed up things. I chose the option to restore to the factory, he downloaded some firmware and restarted. Now, I can not access the router at all. It is attached to a Cable Modem provided by my ISP and I found it with an IP address, but when I try to access it without success.

  Any suggestions?

  Thank you my friend, that has worked.

  Herbert

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• has been able to play gta vice city and san andras and now I changed the frm windows XP to 7. but now I'm not able to play another game

  original title: card__ graphic

  I was able to play gta vice city and san andras and now I changed the frm windows XP to 7. but now I'm not able to play any other game m .is it probkem of bone or my graphics card?

  -----------------

• the habit of 8600 911g copy or new color scanning machine last firmware and software

  I recently purchasded this machine and have discovered that copying or scanning in color does not work when scanning the computer or the printer

  There is no Windows 7 64-bit operating system error message

  check all the settings on the computer and the computer a Doucet times aqll say scan and copy and print in color.

  Document or photo printing jobs computer ok

  Test prints work

  as do all the fuinctions printer.

  Latest firmware and software

  Have you tried

  Pull the power cord reset - nothing

  Printer factory reset - nothing

  Doctor of Pinter and scan shows alll good nothing wrong but test product scan the image in very pale tones for example yellow turns into very pale olive everything is in shades of gray and black.

  copy of the printer itself by using the image of the button color in very pale tones product for example yellow turns very pale olive, everything is gray and black tones.  Black print is perfect

  Copy of the printer using the black key product image in the same shades of gray for example yellow becomes white everything is very pale shades of gray and black, including black print

  It seems to me that there must be a hardware problem between the scanner and the motherboard.

  MY HUMBLE OPINION.

  I reinstalled

  Clues please

  

  Hey Dozrtravlin,

  Looks like there is a hardware problem as you mentioned in the post.  However, there is a step that I recommend to try.  This step is to perform a factory reset the printer to ensure that it is not a problem in the internal software of the printer.  I have these steps and they will send you a private message.  Before performing these steps please read thread of Bob_Headrick on printer resets found here.

  I would like to know how this happens,

  Jason

• Linksys E4200 - can update firmware and roll backs damage my router?

  Hello

  I had to restore the firmware on my Linksys E4200 (v2) because I had problems after upgrading the firmware. I tried to upgrade again and again met with problems. In short, I improved a few times and restored several times. Currently I'm on the old firmware and I without any problem.

  In the old days, it was not wise to update the firmware of some peripheral hardware too often, because some devices has agreed that a limited number of updates to firmware... don't ask me why :-)

  Is this also the case with the Linksys E4200 or can I upgrade and roll back as often as the requires, or as often as I want to try to upgrade because of new features...?

  Thank you

  SJW

  As long as you do the right steps during the upgrade/downgrade the router (loading the firmware using a wired computer, not to interrupt the upgrade/downgrade process, load the right file, etc.), the unit should be fine.

• Firmware and updates of the Addon for D90D7

  Hello

  How long do you keep the firmware updates and add-on for output devices?

  Why modules are listed per unit instead of the OS?

  Why the modules listed for my device not necessarily the add-on most recent available? For example WDM 5.5 contains new versions of Add-ons based Wyse.

  If I want Citrix receiver for my device 4.3 How long can I expect to wait to have available for my device? Or are we supposed to simply create are own packages after you cease to make updates.

  Can we expect improvements to the updates and the web in general experience finding things (downloads, forums, help, across different documents, not sure where to look sometimes) will improve with you coming under the ownership of Dell?

  Thank you

  Anthony

  Anthony,

  Let me answer each question better than I can.

  Q: how long do you keep the firmware updates and add-on for output devices?

  A: this is related to the product life cycle. This information is found at the following ADDRESS: http://www.wyse.com/support/end-of-life-policy

  Q: why modules are listed per unit instead of the OS?

  A: because the firmware is "Dependent on device", the firmware and all the Add-ons are stored in the repository based on the model of the device.

  Q: why the modules listed for my device not necessarily the add-on most recent available? For example WDM 5.5 contains new versions of Add-ons based Wyse.

  R: the only reason that I just was an oversight of the validation group.

  Q: if I want Citrix receiver for my device 4.3 How long can I expect to wait to have available for my device? Or are we supposed to simply create are own packages after you cease to make updates.

  A: there is no specific time limit that we must release the Add-ons. If you need the example of 9 Citrix Receiver) right now, you can install the Citrix receiver on the thin client or you can create your own package by using WDM. See WDM Admin Guide for more details on this.

  Q: can we expect improvements to the updates and the web in general experience finding things (downloads, forums, help, across different documents, not sure where to look sometimes) will improve with you coming under the ownership of Dell?

  A: Yes. We are actively working on moving the site of downloads to be consistent with the processes of Dell.

  I hope that answers your questions.

• Upgrades of the firmware and NVSRAM on two controllers MD3200

  I have a double MD3200 controller (more an enslaved MD1200) which is currently running firmware v07.70.06.63 and NVSRAM vN26x0-770890-005 and I need to upgrade the firmware so the NVSRAM to take advantage of some new features.  I'm also about to implement the level of High Performance and another level of MD1220 storage.

  Wondering if anyone has experience of firmware and/or NVSRAM upgrades on the controller device double MD3200?

  Read the upgrade notes, it seems that it should be possible for me to update without having to close my VMs, however I think that is too optimistic.  So I intend to a failure of the systems, stop the virtual machines, and then upgrade and restart all virtual machines, once the firmware is updated and the storage Bay is visible from my ESXi hosts.

  Any ideas or experiences that anyone can share?  e.g. I need to reboot physically (market power) storage arrays?  I was hoping to do most of the work of the House and I would like to avoid having to attend physically on the site, if I can.

  I did it at home... (MD3000i)   Make sure that the machine you are remoting in with MDSM on it does not work out of storage.   I made this error only once.

  I leave the ESX / ESXi hosts running but stop the virtual machine.   Controllers to recover, as basically powercycled by day, I can't believe that all VM would survive through that if left turned on.

• But intermediaries 1.2 root and server certificate

  Hello world

  I tried to renew the cert on ASA and I got 4 certificates from the seller

  Intermediate1 and 2

  Root cert

  Server Cert

  Server certificate is for ASA operating as VPN, what is the purpose of the other certs and where should I install them?

  Concerning

  Mahesh

  Hello Manu,

  You need to install the intermediate and the certificate root under certificates of CA on the ASDM.

  And the certificate of the server has installed under the certificate of identity section.

  After that, you need to replace the old trustpoint on SSL of the SAA with the new interface.

  I have attached the screenshots as well.

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Connect FI two directly attach FCoE storage and SAN switches

  Nobody tells me if I can connect FI two directly attach FCoE and SAN storage switches also, as you can see in the diagram of connected network?

  If so, should I FC Switch function Mode? Any concerns should I consider?

  Or the best solution would be appreciated. Thanks in advance.

  The UCS will be in Switch Mode FC, which means that it has a default area.  We cannot make a Zone merge with Brocade because we have no control to set up specific items such as domain and other articles CF IDS that need to be changed when you connect a Cisco FC switch to a Brocade.

  Usually in this situation with a 5 k or a MDS you might be placed in mode of interoperability, which changes the default settings and we will talk to them together - in this case, you can't change these settings, so the only supported configuration is CF Cisco at Cisco.

  See you soon,.

  Greg Scarlett.

• ISE Local certificate and the certificates in the certificate store

  Hello

  I'm pretty new to ISE and read the document in the link below to create understanding "Local certificates" and "certificate store certificates. It seems that in the former certificate is used to identify the EHT on customers and is later used to identify customers at the ISE.

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-2/installation_guide...

  Now, what part of the ISE configuration told him to check the certificate sent by the client in its certificate store? I am somehow the mixture up with "Certificate authentication Profile", which is used in the identity Source sequence. But I guess that the certificate authentication profile is used to verify the certificates from a source of external identity as AD or LDAP. So where do we consider 'certificate certificate store' in our configuration of ISE.

  Thanks in advance for help out me.

  Kind regards

  Quesnel

  Hi Quesnel-

  (ISE) server certificate can be used for are:

  1 HTTP/HTTPs - is for the ISE web server that is used to host various portals (comments, Sponsor, BYOYD, my devices, etc.). This certificate is normally issued by a public CA such as VeriSign or GoDaddy. A public certification authority is not necessary, but outside your environment, customers who do not trust the certification authority that issued the certificate will get an error HTTPs warning to users that the certificate could not be verified.

  2 EAP - this is for EAP based authentication (EAP - TLS, EAP-PEAP, EAP-PEAP-TLS, etc.). This certificate is usually issued by an internal CA. The same certification authority issues usually user and/or computer-based certificates that can be used for the authentication type EAP - TLS.

  The certificate store is used to store root certificates and intermediate certificate authorities you ISE to trust. By example, if a computer is running a machine ISE authentication must trust the certification authority who has signed/issued the machine certificate. Therefore, the machine will also have to trust the certification authority which has issued/signed the ISE server certificate that you torque to the EAP process.

  Profile of teh authentication certificate is required if you want to use certificate based authentication. The CAPE tells ISE which attribute of the certificate should be used for the usernmane. Then based on that you can create more specific authorization profiles/rules information. You can also configure CAP to make a comparison of binary certificate with AD and confirm wheather or not the certificate is/has been published to AD.

  I hope this helps!

  Thank you for evaluating useful messages!