IDriver.exe wild race

Similar Questions

• Problem of Tecra M5 BIOS update

  I downloaded the file from the Toshiba site and now have P003Fv370.exe. Race that happens just with "update of the BIOS is not supported OS, unsupported operating system or service pack is installed". I was under the impression that it was independent BONES? Please help, I need to update to stop it crashing and blue screening me every half hour. I have already installed the value-added package.

  I have a Toshiba Tecra M5 PTM51E
  Running Windows 7 Enterprise
  Current installed BIOS is version 1.70

  I also read somewhere on the installation with a USB key, if someone could help I would appreciate it. Thank you.

  Post edited by: deleting
  Just tried again and it says "Could not create"C:\TOSHBIOS. " UPD file! "I don't know what is happening more.

  Hello

  The P003Fv370.exe is a package.
  Right click on that package and select unpack here.
  Now you should see the other folders inside this .exe package.

  From my knowledge, it takes a file that starts the BIOS update.

  If it won't work, I guess you need the original preinstalled system Toshiba update BIOS.
  The other hand I n t think that BSOD appears due to the old version of the BIOS.
  I guess that the update does not solve the problem.

  Maybe the BSOD appears due to a problem of critical software or hardware issues so would be really interesting to know if the same thing happens with the help of preinstalled Toshiba system

• NB205-N210 Power Saver problem

  Hello!

  Im having an error during the installation of the Power Saver software.
  I have Win XP SP3 (Hungarian) and when I try to install the software, it gives me this message:
  "1628: scenario based Setup fails.

  I read after that, and they say "Idriver.exe" commits the error, I tried to turn it off, but I can't
  Can someone help me know how to install this essential part of the software for my netbook, with her dough last only for about 3-4 hours (instead of 7-9)?
  Thank you very much in foreword!

  Invites you to the Microsoft Knowledge base:

  Method 10
  If you get the error message "Error 1628: impossible to install complete based on the script.
  And followed the instructions above and it didn t determine the problem and you just create fees
  installation package by using the InstallShield tool, please disable "Cache installation on the local computer.
  option during the installation package creates the process.
  Link http://support.microsoft.com/kb/555175

  So maybe it has something to do with temporary files.
  Go to c:\documents and settings\ [your name] Settings\Temp
  and delete all the files in there (close all other programs first, or do in Mode without failure).

  Also try disabling your Antivirus software. They can sometimes block facilities.

• 1607 installshield error

  Hi, I had the apple forums already and they have directed me here.

  I'm on an iMac computer in which I ran bootcamp and partitioned a drive for Windows, so I can play games and others. My brother gave me a digital version (no cd) of a game was, but he wants more in .iso format. I downloaded PowerISO to mount the image and tried to start the installation, but every time I start up the installation about 6 seconds, I get error 1607 installshield. I looked all over the internet trying to figure out what to do. Ive tried turning the firewall off and change the parameters of access and monitoring all trouble shooting methods found on the microsoft support page. Nothing seems to work. Can someone enlighten me please in how I should approach this problem.

  I have windows 7 64 bit FULL

  I also installed the latest version of .NET and the installation program that corresponds to the file.

  If it means something; his Microsoft FSX and the file was created in 2006

  Hi Kris,

  We would like to know after the details from you to help better.

  The problem is specific to Microsoft Flight Simulator X?

  As you mentioned that you have installed Microsoft Flight Simulator X using PowerISO, you might face this question for various reasons. If the driver IDriver.exe is not saved correctly or if the Installer Msiexec.exe is not correctly registered or if the user account doesn't have permission to the folder install, then you can deal with this problem.

  In order to solve the problem I suggest you follow the steps in the link below.

  Microsoft games: InstallShield Error Messages

  http://support.Microsoft.com/kb/910816

  Write to us at the State of the question. We will help you to come if you face any problem.

• I can no longer install Palm Desktop on a reformatted computer.

  Since I reformatted my computer and he patched all the way to the top, I can install is no longer the Palm Desktop software.  I put the disc in and it hangs to the installation dialog box and slows down my whole computer.  So I go up the Task Manager and my CPU is boosted to 100% and iDriver.exe is the process hogging the CPU eating hundreds of megs of memory.  Not only that, but there are several instances of iDriver.exe just behind with one instance of iDriverT.exe.  Also, there are several instances of msiexec.exe as well.  Once I have kill the first instance of iDriver.exe stops installation of Palm Desktop.  I even downloaded the latest version of verizon on this site and I'm having the same problem.

  All solutions?

  The fixed.  My user profile has been slightly altered possibly by data that I restored my profile after reformatting.  The restored data likely contained some partial data from the previous Palm installation causing incompatibilities.

  I found the source of the problem when I installed the program as another account with privileges administrator and installation that has happened without a hitch.  So I moved my docs on another drive and blew my profile in hell and recorded again.  When my profile has been recreated, I ran the Palm software installation and installed normally.

  Thanks for your help.

  Message relates to: Centro (Verizon)

• sqljdbc_4.0.2206.100_enu.exe in the race is not a valid win32 application

  I downloaded sqljdbc_4.0.2206.100_enu.exe for Sql Server 2012.

  According to the instruction when I run it I get an error that it is not a win32 application invalid.
  I use Windows 7.
  How to solve this problem.
  Thanks in advance,
  Christiane

  Hi Fanny,.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on Microsoft Sql Server. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

• What are the preferences of ff-related plugin - container.exe in its new version of ff? Specifically, I would like to change them all: config to disable plugin - container.exe

  I did it with a previous version of ff by changing the values of these preferences: dom.ipc.plugins.enabled to true

  DOM. Fake IPC.plugins.Enabled.npctrl.dll

  DOM. Fake IPC.plugins.Enabled.npqtplugin.dll

  DOM. Fake IPC.plugins.Enabled.npswf32.dll

  DOM. True IPC.plugins.Enabled.nptest.dll

  dom.ipc.plugins.timeoutSecs 45

  After I installed ff on my laptop today I can not find the .dll preferences. And plugin - container.exe continues to torment me. For me, that's the only problem with ff since the 7 update. It boggles me as to why you have not managed to get rid of this thing.

  To disable the crash protection, go to about: config and all preferences from dom.ipc.plugins.enabled set to false. (It is possible that your browser has only this entry preferably without any additions.) This will prevent the process of "plugin-container" of race and all plugins will run within the process of Firefox. (from Disabling_crash_protection )

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Satellite M70 with Vista - TCtrlIOHook.exe is blocked due to compatibility issues

  Hi guys,.

  Hoping I can pick your brain. I have the Satellite M70 and have (I think) installed most of the new drivers for Vista... but when I boot up I get "this program is blocked to compatibility issues" blah blah blah..., then says that he has

  Toshiba utility programs
  Publisher Toshiba
  Location C:\windows\system32\TCtrlIOHook.exe

  Can anyone of you tell me please
  one) where I can get a driver to solve this,
  (b) stop this message that appears whenever I start

  Thank you

  Kian

  Hello

  The TCtrlIOHook.exe belongs to the TOSHIBA Hotkey Utility control.
  All this FN keys needs to control the software and TOSHIBA Hotkey Utility is necessary if you want to use the function of the FN keys.

  (A) If you didn t find these utility for Vista on the Toshiba page then it seems that Toshiba don't provide this software for Vista for the M70 laptops.

  (b) If you want to stop the message appearing at the beginning of the boot process, you must remove it from the OS or you will prevent loading software!
  This can be done in the registry. You can remove entries from the RACE
  EntVersion entVersion\Run

• Tecra 8100: Display of W2k driver - S3TRAY. EXE cannot be opened

  Hello

  I have the same problem as the BUSSINIT user posted earlier:
  I have a Tecra 8100 but my screen resolution is only 16 colors, so I tried all the downloads on this page display driver, but:

  S3TRAY. EXE cannot be opened, nothing to do.
  This is the default or something.

  The driver is probably old or something, but what to do?
  I mean, I can't work with display only 16 colors, please help me.

  THX

  Hello

  On the Toshiba page are two different Wk2 drivers listed:

  5.12.01.7002 - 7.30.2 pilot S3 display for the wild graphics card

  7.40.29 display driver for the S3 Savage MX

  Check if you are using the correct driver!

• plugin - container.exe sucks mass memory and makes my computer lag, how I stop it all to appear because he appeared only with the download of the latest firefox?

  I want to keep the plugin - container.exe to come...

  This has happened

  A few times a week

  == I downloaded the latest firefox

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• HP Solution Center... hpqdirec.exe

  I have a HP Officejet 6500 (one year) running on Windows 7.  Today, I got an error message saying: HP Solution Center will not work because I don't have the correct version of Adobe Flash installed.  This message referred me to the Adobe site to download the latest version.  When I did, I always get the error message and Solution Center does not open.  Messages to lead me to the message "hpqdirec.exe", saying: it is not installed.  What is going on?

  Additional note: it is the application of hpqdirec.exe which lacks a component of windows.  Error message does not specify which component.

  Hey TZap. You're going to need "cleaner" software to delete everything. After you run the cleaner, you will need to reinstall the software. Here are the steps to run the scrubber:

  Option 1: From Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77752-2&cc=us&DLC=en&LC=en&OS=4062&product=3795314&sw_lang=
  10. run the download to reinstall the printer
  
  Option 2: If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77752-2&cc=us&DLC=en&LC=en&OS=4062&product=3795314&sw_lang=
  10. run the download to reinstall the printer

  Let me know if this is not the problem.

  Thank you

  Sean

• Cannot re - install Photosmart C7280. Fichier...\Setup\hpzpr140.exe not found

  I tried four times to reinstall the photosmart C7280 on windows 7 (64-bit) computer software after problems with double-sided printing. Software downloaded OK. When installing got message "the not found fichier...\Setup\hpzpr140.exe. Auto-generated error report. Sent to HP and a fix sent on my desk. After following the instructions and the installation at this point was then cleaned. Then got the message "HP Installer uninstaller has stopped working". No solution.

  I've never had this problem before with the previous re - installs. Any ideas?

  dave_faulkner,
  
  Lets try to use uninstall L4. Of the Original installation CD:
  
  1. Insert the CD in the drive and then cancel Setup
  
  2. open my computer and click right then on the CD from the drive and select open
  
  3 open the Util folder
  
  4 open the CCC folder
  
  5. run the L4uninstall.exe
  
  6. once the uninstall is complete, restart the computer
  
  7 run the Accessories\ System Tools Disk Cleanup
  
  8. download and install the latest version of Adobe flash player
  
  http://goo.GL/vf4Z
  
  9 download drivers and full software features
  http://goo.GL/ASbRC
  
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  
  1. type % temp % in the field of race
  
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  
  3 open the Util folder
  
  4 open the CCC folder
  
  5. run the L4uninstall.exe
  
  6. once the uninstall is complete, restart the computer
  
  7 run the Accessories\ System Tools Disk Cleanup
  
  8. download and install the latest version of Adobe flash player
  
  http://goo.GL/vf4Z
  
  9 download drivers and full software features
  http://goo.GL/ASbRC
  
  10. run the download to reinstall the printer
  
  Let me know the results, Best of Luck!

• Application builder cannot build the exe. Error 8 has occurred in AB_EXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi

  I bought a new Dell laptop (Windows 10 Pro) and LV 2015 (32-bit) is installed. I copied my project files and tried to build the exe file and received the error 8. After much searching for an answer, I created a minimal test with just a single white vi project and an exe based build spec to reproduce the error with. Whenever I try to build, I get the same error 8:

  An error occurred during the generation of the application. You don't have the appropriate permissions to create the application at the specified location, or the application is in use.

  Invoke the node in AB_Engine_Build_Method_Wrapper.vi-> AB_EXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi-> AB_UI_Frmwk_Build.lvclass:Build.vi-> AB_UI_FRAMEWORK.vi-> AB_Item_OnDoProperties.vi-> AB_Item_OnDoProperties.vi.ProxyCaller
  
  Method name: Build: Application

  Error 8 has occurred to AB_EXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi

  Possible reasons:

  LabVIEW: File permission error. You do not have the correct permissions for the file.

  I can't quite imagine I could have permissions issues. I of course have full admin on the machine privileges.

  I've seen other messages (like this one) who speak to have Windows Explorer opened the path of construction when it tries to go up and get this error. I made double sure that I don't have ANY Windows Open Windows Explorer, trying to build. There was a mention in one of the positions which perhaps of LabVIEW in current directory is defined in the file generation, but I'm not quite what that means, or why that might happen when there isn't usually prevents me to build on other machines.

  I tried the procedure described in the KB, but no help.

  Interestingly, I have created a virtual machine (Win 10) for a different project and installed LV 2015 32 bits in the virtual machine, and all my applications build very well in the virtual machine. But on OS from my physical machine, I get this error 8 for all construction applications.

  I tried to fix LabVIEW, and also I tried to uninstall reinstall LabVIEW. Nor was the error to go away completely. After the repair, the project has successfully generated once. But subsequent attempts to build fail with the same error.

  See the attached test project and the build log.

  Thank you

  Nathan Scharfe

  CLD

  My best guess is that some external process is the use of the folder and do not let you write here. The most likely candidates are anti-virus software or a service of indexation of a certain type. I'm guessing that he sometimes managed everything simply because it is a race condition and in these cases, the blocking part yet or is already done.

  You could try the building to a network drive, when these forces are less likely to be able to make the lock or you could try to find a software that shows you what software has handles opened in a folder and control for an offender. I seem to remember that the Process Explorer and SIW show this, but it's far from my area of expertise.