run a dll as an app has encountered a problem

Similar Questions

• IDT Audio system tray app has encountered a problem - sttray.exe and lack of Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll entry: RUNDLLEntry at Windows startup.

  Dell Dimension E510 system was crushed by a virus. The files were dumped, authorized reader and a reload fee system has been done. When all files have been charged and the system is recovered, the following errors began to appear at startup:

  -IDT Audio system tray app has encountered a problem - sttray.exe and

  -Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll Missing entry: RUNDLLEntry

  I'd rather be able to clear these by using the operating system disk I hope it do not screw the system. Any ideas would be nice.

  Thank you

  Dennis Holmquist

  Hi Dennis,

  DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer, then re - install printer drivers / should solve the problem.

  Reinstall the printer. In addition, install the latest drivers from the manufacturer's Web site.

  To connect a printer directly to your computer

  Remove a printer

  See also:

  Microsoft Windows XP - add a printer attached to your computer

  RUNDLL error message

  For IDT audio error, you can install the latest audio drivers from the Dell support Web site to see if it helps.

• Spooler subsystem app has encountered a problem.

  HP Laserjet 1020 printer does not work.  Have used this printer for years.  Last print job has stopped the printing process and give the spooler subsystem app has encountered a problem error message.

  Used Mr. Fixit.   Have the print spooler service manually restarted and the RPC service. When I try to print, Spooler Subsystem App Error message appears and printer spooler stops,

  OS is XP Home Edition Service Pack 3.

  Cannot remove hardware HP Laserjet 1020 and reload HP Laserjet 1020 download did not fix problem.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

  Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  Use of SuperAntiSpyWare found two serious problems.  Could cross printer of pending work.  Printer works fine.  Thanks for your reply and advice.

  Best regards

• Spooler Subsystem App has encountered a problem and needs to close

  We cannot print anything on my computer. the message is that the Print Spooler Subsystem App has encountered a problem and needs to close. How to get the print spooler to run and work my printer start?

  Hi Saeed,

  1. were you able to use the printer before without any problem?

  2. did you of recent changes on the system?

  3. What is the brand and model of the printer?

  Method 1:

  You can try to start the Fixit from the following link and check if it helps.

  Problems printing and printing errors

  Method 2:

  You can also read the following article and check if it helps.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

• Printing error: "Spooler subsystem APP has encountered a problem and needs to close."

  Original title: cannot print to the network printer.__I have a net wifi Windows XP, SP 3 and an IBM laptop.

  Printers seem to be installed (XP has the printer connected via USB) but when I try to print from IBM I get an error as follows:

  "Subsystem spooler APP has encountered a problem and needs to close."

  The printer is a HP Deskjet D2660 and the LAN is configured correctly by using the wizard.

  I also discovered that the print spooler is never started.

  In addition, even when I start the spooler it remains not said during the next time I start up.

  Can anyone help? I've been banging my head for two weeks.

  Salvation;

  Thanks for responding.

  My IBM ThinkPad running XP - Pro

  My computer is a DELL and running XP-Home Edition

  Printer installed on DELL

  I have a WIRELESS LAN installed by the installation wizard. The net works fine except for the printer.

  Every time I start the spooler does not work. If I set the spooler of runing the choice is never registered. the next time I start up, the spooler does not work.

  I finally asked some experts to solve the problem of no access to the network printer. It took them more than 4 hours (for a cost) to make it work. Everything was going well until the next day. The problem is back. My thought is that the register should be updated so it will retain the corrtions.

  I downloaded the MATS_RUN.printing.exe utility. It corrects everything except this message on the Spooler subsystem.

  Any advice you can give me would be greatly appreciated.

• Spooler SubSystem App has encountered a problem and needs to close. We are sorry for the inconvenience.

  Spooler SubSystem App has encountered a problem and needs to close.  We are sorry for the inconvenience.

  Hello

  1. When you get this error message?

  2. that you get this error message when printing?

  3. What is the brand and model of the printer?

  4. don't you make changes to the computer before the show?

  Please provide us with more information on this issue to help you best.

  If you get this error when printing, follow the steps from the link below.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/810894

• Run a DLL as an App error on windows XP

  Well today when I started my laptop Office imy was gray and then it appeared
  "Run a DLL as app has encountered a problem.
  I can't get access to my desktop or start menu
  And when I tried to use the safe mode, it wouldn't let me
  On an ocsassion will run the desktop and start menu, but run it a DLL as an App error is still there, and my experience is still gray.
  So I just tried windows with reinstall drive period.
  But the wounldn can't drive.
  I tried to restart it. Nothing has changed.
  is there anyway that I can fix it?
  I can't pay the money that I'm only 15
  I use windows XP
  an HP laptop

  Solution

  1. Click Start | Control Panel | Administrative Tools | Services.
  2. Right-click the System Restore Service, and then click Properties.
  3. In the drop-down list Startup Type, select disabled.
  4. Click OK.
  5. Close the tool of administration and Services Windows.
  6. Do right click my computer, click Properties and click the System Restore tab. The System Restore tab should now appear correctly; However, the system restore service will be disabled.
  7. Turn the system restore and click on apply.

• Multimedia sync blackBerry Smartphone error - has encountered a problem

  I have an 8330 upgrade, my Desktop Manager V4.6 and V4.3 running on the BB.  I'm trying to get MusicSync to work, but I get an error whenever I goto to run it upward.

  "MusicSync has encountered a problem and needs to close. We are sorry for the inconvenience.  If you are in the middle of something, information that you worked may be lost'

  Congratulations if you can help.

  You just solved your problem.

  Media manager and Media do not move or transfer itunes, sync that are protected by DRM. You will see little red locks on them

  in media sync. BlackBerry won't play them even if you were to go there. There is iTunes that are not DRM, but they cost more.

  Now, I don't know anything about but I know not if you Google you will find supposedly free apps that will remove the DRM of the

  songs. (It's what I hear anyway).

  Which explains both your problems.

  Cough cough cough (limewire), excuse me...

  Thank you

  Please solve the message ok?

  Thank you

• Cannot run Connectivity Doctor on Equium M70 - cfmain.exe has encountered a problem

  When I try to run the connectivity doctor to check my wireless settings I get error mesgage "cfmain.exe has encountered a problem and must close".

  Anyone know what this means and how I can heal?

  Thank you

  Hello

  Found this thread in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18511&MessageID=67610

  Please check the juans suggestion:
  cfmain.exe - This is a component of the Toshiba network device. Network device Toshiba is Toshiba network device selector. For starters, this application requires a common Module of Toshiba ACPI and hotkey wireless.
  Well, because of this description that I recommend you to reinstall the common modules and wireless keyboard shortcut utility

  Please also check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14934&MessageID=54643

  You can just try reinstalling the free Config utility.
  Remove this tool, run CCleaner registry cleaning software, reboot the laptop and install again the ConfigFree.

• I had installed the captain claw game and when I try to run the following error report is: of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.

  original title: C:\DOCUME~1\hariraj\LOCALS~1\Temp\7f3f_appcompat.txt

  I had installed the captain claw game and when I try to run the following error report comes... Please solve my problem...

  ....

  ARCADE-ACTION SIDE-SCROLLING GAME

  Of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.  We are sorry for the inconvenience.

  ERROR SIGNATURE

  AppName: cla.exe AppVer: ModName 1.3.0.60: cla.exe
  ModVer: 1.3.0.60 Offset: 000f3956

  THE FOLLOWING FILES MUST BE INCLUDED IN THE ERROR REPORT

  C:\DOCUME~1\hariraj\LOCALS~1\Temp\b285_appcompat.txt

  Please please please please help me... i will be grateful to you

  Hi Raj Kumar,

  You can follow the steps mentioned in the article below, which deals with a similar question

  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

  (Article apply to Microsoft games, steps for other games)

• Error manually running Windows updates "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.

  Original title - manual update of Windows XP via "Windows Update" fails

  07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet

  Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »

  This office has begun on about 3 days ago and just this morning appeared on the Tablet

  I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things

  I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December

  Since then, they have had updates almost every day

  And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI

  Any body else having the same problem?

  And help get the update of Windows XP to run again?

  It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?

  Download and install the latest cumulative security for IE8 update and manually restart the computer.

  visit windows update via the shortened link in your Start menu.

  Assuming that you have Win XP SP3 and IE8, it will be the necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

• The website has encountered a problem and cannot display the page while you try to run Windows update and get error code 0 x 80240036

  I can't update, repeat me the website has encountered a problem and cannot display the page. I need to update to Windows XP Service Pack 3. The error code is 0 x 80240036

  Original title: does not refresh

  Hello

  1 did you changes to the computer before the show?

  2. who is the antivirus installed on the computer program?

  Method 1:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Perform the steps described in the article:

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 3:

  If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  322756 (http://support.microsoft.com/kb/322756/( )

  I hope this helps.

• Error message: "the site has encountered a problem and cannot display the page you are trying to view", while running Windows updates.

  Original title: Windows updates works do not, cannot get windows updates

  I had to reinstall Windows XP service pack 2. I went to the updates and got this message. The website has encountered a problem and can not display the page that you are trying to view  I tried several times and got the same results.

  The problem is that you need to install Service Pack 3 before being able to get all post-SP3 updates. :-)

  Here's what you need to do:
  Preliminary work:

  Download the installation files of SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.

• "The website has encountered a problem and cannot display the page you are trying to see." error when I try to run windows update

  I am re - install XP on an SSD. The installation went well, but when I try to run windows update, I get the following error message: "the site has encountered a problem and cannot display the page you are trying to view. I reformatted the drive and re-installed windows many links - no luck, I get the same error message. Old disk HARD charge with the SME XP install updates to drive very well. Help please!

  See if the article sheds some light for this problem: http://support.microsoft.com/kb/836941

• Error "the site has encountered a problem and cannot disply the page you are trying to view" when I run Windows Update

  Original title:

  I just reinstalled xp pro on my Dell D620 and it is not allowing me to run the updates. Error message: the site has encountered a problem and cannot disply the page you are trying to view. I have service pak 2

  Hello

  You get this error when you try to open the windows update or when you check for windows update?

  Check out the following link.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614