IEEE 1394 and Pavilion Elite

Similar Questions

• IEEE 1394 and W2K on my Tecra A3

  Hello
  This device does not install correctly, it seems
  under IEEE 1394 ok, but the entry under network adapters
  does not exist and there is a PCI device listed in other devices who refuses to own as to what it is.

  Seems to work ok on XP.

  Any ideas?

  Hello

  have you downloaded the installation instructions order? To http://eu.computers.toshiba-europe.com - Driver download you find also for W2k.

  Also install all Quickfixes Toshiba site because the IEEE 1394 is a standard W2k driver that should work on every platform without problems!

  Good bye

• Problem connecting my camcorder canon HV40 using the IEEE 1394 port.

  Windows Movie Maker (and other similar programs) will not recognize my camcorder. Mini-dv Canon HV40.

  I watched many forms and comments to try to solve this problem.

  Looks like I've tried everything.  When I uninstall the driver and restart my computer with the camera on playback mode, the device is found, takes me through the installation wizard and peripheral band AV/C, list host controller and about things but not the Canon camera.  The ToolTip that appears down right when the new hardware is found listed the specific Canon camera along the spirit the other stuff.

  On a random note, I uninstalled the IEEE 1394 and used the "Add Hardware" command to find the camera.  It worked once!  Grew up in windows movie maker and tried to download.  Along the way got a weird error 'photogalley' insert disk I have? Code of 1706.

  Never could make him again.  For only "device not detected.

  I get this error thing photogalley even when you do a scan.  If I hit Cancel enough that he leaves and the analysis was recorded.

  I'm just smart enough to be dangerous, but eager to get this resolved.  Any help most appreciated!

  I think that the way it should work if I turn my camcorder to play, the movie maker should take it from there.  Ouch who would be nice ~.

  Windows Movie Maker (and other similar programs) will not recognize my camcorder. Mini-dv Canon HV40.

  I watched many forms and comments to try to solve this problem.

  Looks like I've tried everything.  When I uninstall the driver and restart my computer with the camera on playback mode, the device is found, takes me through the installation wizard and peripheral band AV/C, list host controller and about things but not the Canon camera.  The ToolTip that appears down right when the new hardware is found listed the specific Canon camera along the spirit the other stuff.

  On a random note, I uninstalled the IEEE 1394 and used the "Add Hardware" command to find the camera.  It worked once!  Grew up in windows movie maker and tried to download.  Along the way got a weird error 'photogalley' insert disk I have? Code of 1706.

  Never could make him again.  For only "device not detected.

  I get this error thing photogalley even when you do a scan.  If I hit Cancel enough that he leaves and the analysis was recorded.

  I'm just smart enough to be dangerous, but eager to get this resolved.  Any help most appreciated!

  I think that the way it should work if I turn my camcorder to play, the movie maker should take it from there.  Ouch who would be nice ~.

  ==========================================
  Sorry... I have not * the * perfect solution. Looks like you're
  dealing with complex issues.

  However... I can offer a few links that may be useful.

  * Proceed at your own risk *.

  First of all, I would like to do a system restore to an hour before the start of this issue.

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Now... the following items may offer some useful ideas:

  Windows Vista-

  Import video from a videotape

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Windows Vista-

  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  If the AutoPlay screen does not appear... What follows
  Articles may help:

  Windows Vista-
  How to change the auto run settings

  
  http://tinyurl.com/y8oneuy
  or...
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  And... maybe the following will propose a few ideas:

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Download video from your camera to your computer
  http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/DLmovies.mspx

  Windows Vista-
  Import analog video to your
  computer using a DV camera
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ae62d5e-29e2-41eb-B326-9e42ac46b7021033.mspx

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• HP Pavilion Elite m9040n Desktop and Fire Wire 1394

  I have the above mentioned Office. It has a plugin from 1394 to the front of the case. The Pavilion comes with all the software to pull wire work? I backed up my hard drive on a Toshiba external drive with a USB cable, the other day and it took 6 hours. Is not fire wire suppost to transfer data faster than a USB cable? Are there special things I need to know when buying FireWire 1394.

  I was looking on the internet the other day and they showed the son of fire with pins 4 and 6. Looking into the hole on my computer, it only looks like 3 terminals?

  Thank you

  Rick, welcome to the forum.

  There is no necessary software for Firewire (IEEE 1394-a).  The driver is installed with the operating system.

  Here is the page of the following motherboard for the computer.  It only shows that there is a Firewire (IEEE 1394) (# 11) port in return IO ports.

  Here is an article that shows the comparison of speed vs. Firewire USB.  FireWire was developed by Apple.

  I hope this information answers your questions.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• I have a Pavilion p7 - 1067c and need to install an IEEE 1394 controller, but there is no PCI slot.

  I need an IEEE 1394 port for capture video from my camcorder.  It doesn't seem to be the standard white connector on the motherboard to install a card.  There are a couple of black connectors line up with the empty card slot but not the white connector found on other computers.  I am familiar with the Texas Instruments OHCI IEEE 1394 Host Controller PCI compiant.  Is there something different for this HP?  I would be grateful for any help you can give me on this.

  Hello

  Short black expansion slots are PCI Express x 1 ports so that you will need a firewire card with this type of connection - an example of this can be seen here.

  Kind regards

  DP - K

• Want to know different speed USB and IEEE 1394

  Recently, I downloaded my photos on an external hard drive, Toshiba. The first backup took 6 hours. I have always heard that a fire wire is faster. Is it useful to make a fire wire to perform this operation? I use a HP Pavilion m9040n with windows 7. I have an IEEE 1394 port in the front and the back of the computer. What rates are associated with a USB port and a cable fire? Thank you

  Since you have a HP Pavilion m9040n - I guess that's when even USB2 you have there.

  You can find a detailed comparison between USB2 and Firewire 1394 here: http://www.qimaging.com/support/pdfs/firewire_usb_technote.pdf

  There is not only a large part of the differences imho. I tested both and in my case usb2 was a little faster.

  Much has changed since the introduction of the USB3, but unfortunately it is not available on your PC.

  I hope this helps.

• How to access the BIOS on a Pavilion Elite e9237c with mouse and keyboard wireless?

  I have a desktop computer Pavilion Elite e9237 with a wireless keyboard and mouse. I tried to access the BIOS by pressing F10 at startup with no luck, and I can't access any of the other menus for the start-up eiither. I don't have a PS/2 port on my computer, so I can't get a wired keyboard and mouse. Does anyone know how to access the BIOS with this configuration?

  I bought a USB keyboard and he answered in the same way... No bios access. I then studied why it did not work and discovered that it was the way in which he has been connected to the computer. I had initially plugged into a USB hub when he was not working and I moved it directly into a USB port and it works! I plugged my keyboard wireless directly into the USB port and it works too! Thanks for your help... I wouldn't have thought of it if it wasn't for to recommend you the USB keyboard.

• I have a HP Pavilion Elite e9250t desktop PC and I want to upgrade my video card

  I have a PC desktop, HP PAVILION Elite e9250t with the specifications below. What graphics card can I go to? I currently have the Radeon HD 4650 with 1 G memory in the form of video card. I want something more grand, better and faster to run Borderlands 2 on high ground. I'm burning my card at 1920 x 1080.   Help, please.

  Processor: Intel (r) Core i5 CPU 750 @ 2.67GHz

  Graphics card: ATI Radeon HD 4650

  Total RAM: 12.0 GB

  The Kinder answer is that you must decide what is important.  Go to this site and use the section "I can run." You can put in different maps and display the results. But the game you questions about the needs at least the GTX560.

• I have a Pavilion Elite M9150F and it seems that the ignition button does not work. The power light is on

  My Pavilion Elite M9150F P/N KC880AA-ABA running Windows Vista Home Premium 32 bit. The device turns on no switch or remote control. He lite is turned on and power is running through the unit until button (checked through AC voltage detector) are there known issues with these? Are there spare parts? It doesn't hang or move the last time it was turned on. What are my options? Thanks for any help.

  Hello cello6996
  
  You are in warranty? If so, I would suggest contacting HP. If you are out of warranty, follow the steps below.
  
  How does a power button is essentially that it shorts two special pins. This short film is a signal to the power on the power supply and all components. A quick Google search reveals the most common method to do this is to disconnect the wires to the pins on the motherboard power button and then tap a screwdriver against just these two pins. Use gloves as a precaution. or a screwdriver with an insulated handle.
  How to bypass the power on button on pc
  Is there a way to bypass the power switch?
  
  If the computer starts correctly something wrong with the power button. If the problem persists, it is more than likely a problem with one of the hardware components and the problem will have to be isolated further. Let me know what happens.

• HP Pavilion Elite HPE-372f: MS-7613 (Iona-GL8E and GTX 970 bios update

  Hi, my system is supplied with the card mother MS-7613 (Iona-GL8E! I'm trying to see if there is an update available to the BIOS before updating my video card for GTX 970.  I already upgraded my power to 600 W for the 970. My current version of BIOS [according to Windows system] is American Megatrends Inc. 6.07 date 19/05/2010. Please help me find where I can get an update of the bios for my motherboard.

  Here is more information on my system:

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-300-desktop-PC-series/4162190/model/427545...

  Right now I'm really confused!

  After reading the return of Best Buy Canada policy [which gives me 14 days to return my purchased GPU]. I decided to go against the advice I got from this thread and another HP forum.

  I bought the Zotac GTX 970 at Best Buy, thinking it could be a very small chance that it will work, and if it does not work I have he's coming back!

  To my surprise after installing it, it started no problem! I installed the latest drivers from the website of Zotac and then rebooted the system, but still no problems!

  I ran all the points of reference 3-DMark, more than twice with no problems! [which is about 7 times faster than my ATI hd5770]

  Here are my results: http://www.3dmark.com/3dm/6457066

  I played a few minutes with the deity: sin of origin with ultra graphics to 80 FPS and still no problem!

  I also played a few minutes with supreme commander2 [game 2010 year] at 60 FPS and still no problem!

  I close on my computer about ten times, just to make sure that the system is stable and still no problems!

  Here are two pictures of my information system showing that I run the version of the BIOS HP 6 and the GTX 970!

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 447 & authkey =! HfU-APzSFQeV0Il & v = 3 & ithint = 2cjpg % photo

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 446 & authkey =! AGmYzz92v2tiaNw & v = 3 & ithint = 2cjpg % photo

  I only used it for two days and I hope I won't run into problems in the future!

  So my advice is to check your store for their return policy and try again the GTX 970 yourself! Don't let not the other experiences of volunteers/users HP form this discourage you from trying it!

  PS Don't forget to upgrade your block of POWER 500 W. [I mine improved 460-w 600 W Corsair]

• You will need to plug Sony IEEE 1394 camcorder to an iMac. It would connect to the thunderbolt via an adapter port? I have a cable of firewire 800 and wanting to know how to get the video of my iMac. Thanks for any help you can give :)

  I borrowed a camcorder tape Sony that has an IEEE 1394 (ilink Sony) and eager to download video from my iMac.

  It would connect to the thunderbolt via an adapter port?

  I have a cable of firewire 800 and wanting to know how to get the video from my iMac via this cable.

  Appreciate any help you can give :)

  You want a Thunderbolt Apple FireWire adapter. Here is a link (to the US store):

  http://www.Apple.com/shop/product/MD464LL/A/Apple-Thunderbolt-to-FireWire-ADAPTE r? FNODE = 8 b & fs = f % 3Dadapter % 26fh %3 D 4595% 252B45b0

  Sorry, I don't know what software you need to play your video, once you get the cable work.

• Trying to find the plug and the power upgrade in a HP Pavilion Elite m9177c

  First time posting here so I hope I chose the right place for my question.

  I currently have a HP Pavilion Elite m9177c as a tempoarily computer until I can build my own. He was works fine but I found that this computer for all its good specs has only a 8500GT no idea why parent obtained through costco and gave it to use when my dell power supply gone bad and must be replaced.

  So I chose an EVGA 9800 GT

  http://www.Newegg.com/product/product.aspx?item=N82E16814130534

  But I discovered that my HP probably has just one power 350 watts (checked online still need to open the case to be exact, before buying it) while the card requires 400 watts accoring to the details.

  I tried to call HP support for dimensions and wattage supply type, but it was a chore. One guy said all the power supplies have the same size (maybe he meant the hp ones for my computer, but he never said so), another guy told me that without a guarantee that he could not even tell me the power and the third Lady said my dimensions are 9.6 inches by 9.6 inches or 24 centimeters. (do not know if she was trying to give me a microatx measure and I misunderstood the 3 as a 9 or what.) And the first guy claims it was a micro-ATX Power Supply, while the other comes from say atx.

  So after some googling I found these links

  1. http://www.censuspc.com/HP-Hewlett-Packard-5188-2859-350-Watt-SIRAH-350-Replacement-Desktop-PC-Power... - this seems to be what I have but he calls it the ATX 12v version

  2.http://www.911forpcs.com/5188-2859.html - this seems to be something I could go too, but I don't know if I might be better off with a full-on name brand like Corsair.

  3.http://support.hp.com/us-en/document/c01736200 - this is a different model of Pavilion Elite but so far it looks like mine how. The same video, for some reason any does not exist on the page for my model.

  I found two feeds that seem to fit the same dimensions as in link #1, but a larger 0.1 inch on a measure, but I hope that my hp case allows a slight wiggleroom.

  1. http://www.newegg.com/Product/Product.aspx?Item=N82E16817139028 - a 600 watt Corsair

  2. http://www.newegg.com/Product/Product.aspx?Item=N82E16817153151 - a 530 Watt Thermaltake

  Was just curious to know if anyone has better info on what exactly is in my case, and what is the best food to buy. I still intend opening the case before buying but just moved and such and call help tech kind of wore out me. I wanted to anyway just say that the computer has been much less the thing of the graphics card. Thank you

  Hello

  Type HP power supply (PSU) dimensions for cabinets mid-turn are: 5.9 by 3.4 by 5.5 inches.  If you get a power supply that is longer you might have problems of space between the PSU and the optical drives.  In addition, there are a stabilizing latch that cannot secure the PSU of stirring. This is a minor issue you should aware of your PC should be buy a power supply which is longer than the typical POWER HP block.

  The Corsair and both Thermaltake excellent food.  I would give the go-ahead for the CX600 Corsair ($50 after rebate) based on the cost, the total power available and the efficiency rating.

  This power supply is typical for your PC based on the part number indicated by HP PartSurfer.

• I have a HP Pavilion Elite m9060n desktop PC and want to have two monitors.

  1. I have a HP Pavilion Elite m9060n desktop PC and I have my monitor connected to my computer using the NVIDIA GeForce 8500 GT DVI - I port chart.  I want to use two monitors and on the back of the computer in dos I/O ports there is a VGA slot but there is a black top, lid that States do not remove.  This means that the port is not available?
  2. I have also a port HDMI as part of The NVIDIA GeForce 8500 GT can I use that and the DVI port on the NVIDIA GeForce 8500 GT to have two monitors?
  3. Can I use a DVI splitter with DVI-d port on the NVIDIA GeForce 8500 GT to have two monitors?

  NVIDIA GeForce 8500 GT

  

  

  1.I have a HP Pavilion Elite m9060n desktop PC and I have my monitor connected to my computer using the NVIDIA GeForce 8500 GT DVI - I port chart.  I want to use two monitors and on the back of the computer in DOS i/o ports, there is a VGA connector, but there is a black top, lid that States do not remove.  This means that the port is not available?

  YES, the white cover means that the port / ports are not available. Most HP consumer computers automatically disable the onboard graphics when a x 16 PCIe graphics card is installed

  2.i have also a port HDMI as part of the NVIDIA GeForce 8500 GT can I use that and the port DVI on NVIDIA GeForce 8500 GT to have two monitors?

  Yes, you can use the HDMI and DVI-channels simultaneously to support two monitors. Here are the specifications of your desktop HP Pavilion Elite m9060n. According to the specifications;

  1 - S - video *.
  2 HDMI
  3 - DVI - I (dual link) *.

  Supports two displays at the same time

  According to observers, you may be able to use your current configuration to drive two displays. You can use two HDMI screens with a HDMI and a DVI-HDMI cable. You can use two monitors DVI - D DVI cable with a DVI-HDMI cable. You can also use a monitor VGA and HDMI or DVI - D and VGA monitor with appropriate adapters and/or cable. Please provide the brand and models of two monitors for most accurate response.

  3. can I use a DVI splitter with port DVI on NVIDIA GeForce 8500 GT to have two monitors?

  N °

• a pavilion elite h8-1040 are home to a nvidia gtx 580 or 590? power and heat are my concern. THX

  A pavilion elite h8-1040 are home to a nvidia gtx 580 or 590? power and heat are my concern. THX

  Hello

  Some models of HP PC are configurable with a NVIDIA GTX 580 requiring optional power of 600 watts.

• What ieee 1394 pci card Fireware should I install to my hp pavilion h8 1234

  What ieee 1394 pci card Fireware should I install to my hp pavilion h8 1234?  I need to run a Nikon Super Coolscan 8000 Ed currently using Windows 7.

  Thank you

  2Wander

  A PCI Express x 1 card that is compatible with the operating system installed. You can find one at NewEgg.com or another provider online. Use Google or Bing to find the one you need.