If nothing works right...

Similar Questions

• Nothing works right now

  Right now (0:10 CEST) at Rome in Italy, it is impossible to achieve at https://digitalpublishing.Acrobat.com/

  tested on many computers/browsers/networks, of the place of work and place of origin.

  We cannot submit our daily production.

  Status DPS is said to be 'green '.

  Help, please

  You can always check http://status.adobedps.com/ for the status of our systems. There is a note on the page dealing with this failure.

  Neil

• Nothing works, no icons, no bar tasks, do a right-click cannot ctrl-alt-del!

  I have no icons, no bar tasks, cannot do a right-click cannot ctrl-alt-del... Nothing works.  Computer turns on, the lights work... but nothing.  I have Norton via comcast too!  I use my computer laptop girls right now.  Any help would be greatly appreciated.

  Thanks :)

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• TouchSmart iq816 hibernation / sleep not working right

  I had to have the hard drive replaced.  Everything works on my system, but the Hibernate / sleep doesn't really seem to be getting into the appropriate mode.  I think it is just turn off the monitor.  Ambient light remains on, the reader, in my view, is also staying.  I tried everything, changing consumption patterns.  Nothing is running that should not be running.  I checked the BIOS, but there is no power to change this setting.  And I think that's the problem.  I have only limited use of the bios.  Has anyone else had this problem with the sleep/hibernate?  How can I get this to work right again?  Thank you.

  Nevermind, I have restored the default BIOS settings and now it works again.

• PSG - MSC, WMP, Winamp, drag-and - d├⌐poser that nothing works for me to create playlists!

  Hello

  Was very happy to buy the 8 GB Sansa Fuze player and now I am totally frustrated with it.

  I have 2000 songs and I put them on the drive by drag / move (player was still in the factory settings). I had well organized my songs into folders because the ID3 tags are not all good, and I don't want to sit and edit the tags of 2000.

  Obviously the player does not function to browse the folders so I started looking in the creation of playlists and he hass nothing but frustration since then.

  I read almost all of the discussions about this and tried modes of the MTP and MSC and everything. Nothing works.

  Windows Media 11 and Winamp player always without success.

  Here's what I want to do:

  1. create playlists for each folder, I added in the 'Music' folder on the rocket, using the files on the "rocket" and not my computer being the music that I have loaded on different media (external hard drive / CD / etc).

  2 be able to navigate to these playlists and play according to what I want.

  I'm not a geek, but I'm not a starter. So all sorts of solutions welcome.

  Please help me. I really want to throw the player rather than scroll through the songs of 2000 or modify their ID3 tags.

  Feeding you the Lil Monsta first.  It's OK, but the "rocket" can have problems, find the files if they are not correctly tag tags ID3v2.3 ISO-8559-1.

  Music files display correctly when browsing the device?

  The "rocket" recognizes a variety of bit rates, as long as the files are in mp3 or wma format.

  What you need to do is to take the files you have created and edit the ID3 field data as you wish, to group the files if you want.  If the files are grouped together in folders, you can extract the files (or pull the source even if they are available on your PC) and work top with MP3Tag, available for free download.

  I have not tried, but it may be possible to change the files on the device, and then save them to the "rocket" and delete the mtable.sys file in the root directory before you leave or disconnect the "rocket". What I hope will happen, is that the original ID3 tag database will be rebuilt using your tags edited.

  I mention this workaround solution, since you have already loaded 2000 files on the device.

  The sticky issue is the 'default', used when you load your music.  MTP mode out-of-the-box, by default the "rocket" at less than your operating system of the Sansa queued data to open a session of MSC mode communication, based on automatic detection.

  The probability is higher that, since you mention WiMP11, PSG is the mode of choice.  The file mtable.sys in the root directory is not seen in MTP mode.

  Have you tried to synchronize your rocket with WiMP11?  The synchronization process can work in the opposite direction, pulling songs from the device in the library of your Media Player.  Once there, you can use the "Advanced" tag editor to correct tags, but MP3Tag can work on whole batches of similar files for you, or it may even take your entire collection of, say, ID3v2 tags and rewrite as 2.3 with the correct character set.

  Chicken can allow you to generate playlists on your PC and send the .pla playlist file to your Sansa. (No, the files are NOT duplicated in a teeny .pla file, here is only a list of files!)

  Finally, when you're connected in MTP mode, navigate to the music folder.  You can generate playlists at will, especially when they are already on the device using Windows Explorer in MTP mode. Choose a desired file, right click to create Playlist.  Rename this playlist as you want and open it.  Now, drag and drop all your titles in this list box.  Note Please!  You're not actually dragging the files in the list, just the TITLES go from there - how cool is that!

  Two towers with lots of files: If you have a list, hold down the [SHIFT] key will allow you to extract all the files between the two clicks as a group, or now the [CTRL] will allow you to consolidate each individual file clicked until the release of [ctrl key].  Then, drag one of the files selected to the playlist, and all selected files will follow.

  I prefer to drag these new playlists in playlist file, which makes them easier to find later, compared to the research of the multitude of files in the music folder.

  Bob

• Click on ease of access and background checked and magnifying glass - want to go back to my original - nothing works I'm trying

  facilitate ease of the bottom access at the start of the cp - was curious to know why he was always there - given some options that I thought would be to my advantage - Word Magnifier and background color have 2 choices - now I have a black background and hate - all means of entering my default - nothing works-someone can help - cannot restore to yesterday (just did this today) because there is no manual way to come to affect the sleep - last restoration date was in 2011 and that's all what he shows me-

  Hi BeatriceCalvacca,

  Welcome to the Microsoft community where you can find all the answers related to windows. Looks like you have problems with the bottom once you have clicked on an option in the ease of access.

  First of all, let's change the accessibility settings:

  1. click on start, then click Control Panel.
  2. click on "Ease of access", then click on 'accessibility '.
  3. click on "make the computer easier to see.
  4. in the accessibility Control Panel window, scroll down and under "Doing things on the screen easier to see," clearly the box "Remove background images (sicettedonneeestdisponible).
  5. click on OK.

  Now, let's go and switch back to the Windows Vista default theme:

  1. right click on the desktop, and then click Customize.
  2. under "Themes Aero", click on "Windows vista".

  This should return the display to the default settings, how you can customize your office again.

  I hope this helps. If you have any other questions feel free to respond and we would be happy to help.

• CODE error 39 try installation, gel, try the registration program, said driver update driver update, nothing works, still cannot install the device driver

  I try, nothing works. I try the system restore, try supportmicrosoft.com and they fix it, but when I open the Device Manager, my cd/dvd drive are still '?  When I install the new window to solve the problem, window would not install the new program because it says I have no device driver for the cd/dvd drive.

  Help.

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but not joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing work

  After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but still no joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing works. WHAT?

  Print to Adobe PDF? Why the * & ^ * & ^ V_ $ didn't pay a lot more money to Adobe for an Adobe program that does not work with another Adobe program? Oh, right--they want to move me up (buy) the new Adobe graphics programs. I'll keep sweating this point and will no doubt wind up forking over a thousand$ $$ or so for 'new' stuff I don't need.

• I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works

  I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works?

  Try to hold the alt/option key while you restart Lightroom. Make sure that the right catalog file is selected and click on the "integrity test" box to see if there is a problem with the catalog file that might be repaired.

• Help, nothing works-_-

  Well, I am not an expert in Java or a sorcerer who knows all about computers and whatnot but uninstall Java should be simple as pie, right? I tried to uninstall Java7 update 1 for the last hour or two and I have used several uninstallation and registry fixing programs to get rid of the remaining 7 update 1. Nothing worked at all. Even after using the control panel (because that's what comes with Windows 7 this should work, right? wrong.) the program says Update1 is still there. When I choose to uninstall it, it asks me if I want to make changes to my pc I choose always Yes, then it is the road. Then the progress bar appears. "Collection of information" or something of the like is up above the progress bar when it is almost full the window closes for half a second then pops up with the same progression all the progress returns to its initial position and then close the uninstall program as if he were never opened.
  
  * Update Java7 1 became self conscious and doesn't want to NOT be removed from my levels
  
  Card of my PC:
  Windows7 Home Premium 64 - Bit SP1
  AMD A8 - 3800 APU with Radeon HD graphics card
  8.0 GB RAM
  NVIDIA GeForce GTX 560 Ti
  
  Note: I'm not a developer of any type, I'm only 15 years bent on Minecraft and have fun with my friends.
  
  Published by: 945659 on 10 July 2012 22:09

  Have you tried this:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Because the main source of your misery is still wonderfully robust installation software Microsoft, not Java. The fact that Oracle aspires to the creation of Setup programs should not be the reason why your computer is messed up when something is wrong.

• There is a box on my home page; nothing works on the screen and I have to open my home page in a new window. Can you help me?

  When I open Firefox on my home page, there is an empty space in the middle of the screen. No script; just a bar click on and an empty box and a (?). Nothing works and to get out of the Firefox screen, I have to close it with the Task Manager. I can open in a new window and the box is not - that's what I use now. Can I have a virus? Any help will be appreciated. Thank you. Carol

  AOL toolbar extension has been reported because of this problem with an empty window that appears at startup.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When I click on Firefox, a message "profile not found" I tried to uninstall and re install. Nothing works.

  I tried everything but nothing works. When I click on the Firefox icon, an error message appears saying 'profile not found or installed' I installed Firefox so many times, but the same error comes again and again. I need help very quickly. Please help me. And I thank you in advance.

  Hello Am9816, try pressing windows key + R and open: %APPDATA%\protector.exe
  
  in it rename the folder labeled "mozilla" do something like "oldMozilla" and try to restart firefox.

• After 10.11.5 Update: nothing works: start, the recovery, the new facility,...

  Can someone help me please?

  On one of our macbook pro: end of 2011 in stock... hard drive, memory stock, after the 10.11.5 update nothing works anymore:

  -Start: sometimes goes to 70%, 80% of the progress then a few lines appear and the screen goes black for a second and then turns to white to stay like that forever.

  -recovery of the internet: charge of recovery, then starts and goes back to the white screen.

  -time machine backup works do not at all

  -Resettlement of USB-stick: boot from USB key gives the same result as the normal start-up (see above)

  -everything: fashion, single user: same thing

  (Internet) Apple hardware test allowed the machine.

  Thing I could try?

  Target works of fashion, I copied most of the files on the external drive.

  If nothing else works, can I do a clean install to this macbookpro (in target mode) of mine?

  Thank you very much.

  can I do a clean install to this macbookpro (in target mode) of mine?

  Yes. Open utility disk on your computer. Run disk utility, select the drive from the computer problem and select first aid. Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Download the installer from the App Store using the identifier Apple associated with the computer that you are trying to recover. Then re-install the operating system on the computer of the problem.

• 'Most visited' disappeared from the My Places bar. I tried all the suggestions about re: config, drag-and - drop, etc. Nothing works. Thoughts?

  The 'most visited' tabs and an RSS feed I use have disappeared from my places bar. They now sit under 'Favorites' and are very annoying.

  I followed all of the suggestions of Mozilla and other sources about the topic: config. Nothing works. I tried to drag and drop 'most visited' return to the places bar, but this does not work, either.

  Can someone please give me a solution?

  Thank you very much.

  patalarga

  You can drag the "bookmarks toolbar items" in the toolbar bookmarks to the Navigation bar if you want to bookmark is displayed on the toolbar.

  • https://support.Mozilla.org/KB/how+to+customize+the+toolbar