If the display is off on 12-inch macbook, he's asleep?

Similar Questions

• Then the display turns off I can't get it back without force restart

  When the display switches off the power due to the low battery power & I can't get this back even when I plug it into the sector and having to force the computer to restart.
  Is there a pref somewhere to turn it off?

  Hello

  When the screen turns off, exactly? How much capacity has battery at the moment? 5 % ? More?
  Try to higher level.
  When you work with your laptop and the battery level is low battery and the alarm alert will appear in the taskbar, but you will be able to continue your work several minutes or connect the power running.

  I'm afraid that your laptop reaches the critical battery level and then maybe is too late for any action.
  Set the low battery level to 10% and when the notification is shown connect power adapter immediately.
  I imagine that the screen doesn't have to be out of all.

• Help: Fuze distorts the sound when the display turns off

  Hello

  Since a few days, I own my rocket. Today, I recognized the following problem:

  When the display turns off the "rocket" distorts the song. It's a bit like stuttering, it's his bad.

  When I keep the screen turned on (by clicking on the boxes or more) he playes the song of good quality.

  The EQ is set to standard.

  Has anyone experienced the same problem?

  I don't know what to do, what an individual problem of my camera (default?) or maybe a general problem? I would stay there or should I change it?

  Thanks in advance,

  Stefan

  This problem is fixed in the next firmware should be out in the next few days.

  TO work around it, just put the equalizer settings on the equalizer custom for anything other than 0,0,0,0,0

• Can not turn on the monitor on the Satellite once the display turns off after 10 min

  Hello..

  I have a problem with my laptop...

  When the screen turns off after 10 minutes, it no longer lights!

  I move the mouse, try typing on the keyboard, but it does not work...

  to activate the display again once I should close the lid for the hibernation, then open it again!

  I hope that you will help me @_ @!

  Hello

  Check it please http://support.microsoft.com/kb/917332/en-us
  To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

• Defragmentation stops when the display is off

  I recently used the Disk Defragmenter to defragment my hard drive.  After reviewing the forums I discovered that it does not work when the computer goes to sleep so I took care of the mode "Eve".  However, my computer is always programmed to turn off the display after 10 minutes.  As the defragmentation. can take several hours, I didn't leave the screen while he was doing his job.  However, when I returned to the computer during the process and reactive the display, he did not know if the defragmentation. given market or extended.  I would not have thought that the display off should interrupt the defragmentation. but I would appreciate clarification on this point.

  Hello

  If the screen saver is on, Defrag will still work in the background.

  There is no need to do what you do.

  I think you should read this about Defrag in Vista and you don't have to do it manually.

  The Vista defrag works quietly in the background without intervention on your part

  http://support.Microsoft.com/kb/942092

  In Windows Vista, there are a lot of improvements in the defrag engine and handling of fragmentation. By default, Windows Vista uses Task Scheduler to automatically keep the defragmented hard drive. This Automatic defragmentation does not affect the performance of the Windows Vista operating system...

  If you want to use a much better defragmentation program which is free and where you can see the results, I suggest this one:

  http://www.Auslogics.com/en/software/disk-defrag/

  See you soon.

• HP Pavilion DV6-6117dx - horizontal flickering lines appear after the display turns off automatically

  The DV6-6117dx model (as well as other HP Pavilion laptops) have experienced a problem where the screen will display a flickering, horizontal line to the top of the screen, after it has been automatically disabled (note: not in sleep or Standby Mode).

  There is a setting to "off the display of [X] minutes" in power options.  I have my DV6-6117dx value dim the screen after 10 minutes and turn it off after 15 minutes of inactivity.  Sometimes, but not always, when I move the mouse to turn the screen back on, a couple of flickering horizontal lines will appear at the top of the screen.  It is very annoying, and the only way to remove them and to have the screen back to normal is one.) put the computer to sleep and wake it or b.) restart the entire system.

  Everything by putting the laptop to sleep and wake-up is not a huge problem, I wouldn't do that, period.  I owned a laptop Toshiba for about 6 years and never had a problem with her like this (the reason why I bought a new laptop was because my old man was 6 years old and the technology was outdated a lot, a lot).

  HP says it's a software problem, but it did come with a way to fix it yet (at least not that I've found).  I ask all the 'Experts' out there if they have a final way to solve this common issue experienced by some models of HP laptops?  I said to uninstall and reinstall video drivers without success.  I said to install video drivers only to AMD, and then only to HP, and then only from Windows Update, but none of these solutions worked.  I said to update BIOS, but it does not solve the problem.  I told him to try to restore the system to the factory settings, but this did not help.  It is obviously a software problem, but nobody at HP seems to have a definitive solution, how to fix it.  Is my only hope to return to my laptop to be replaced by a different model entirely?

  I hope that someone out there has an answer, it's a common issue that I know a lot of owners of portable HP experienced.  Thank you!

  Hello
  I think it's the right time to get in touch with HP and use the guarantee. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

  You can also try the suggestions from the link below before you send it to the service:

  Common issues with the screens

• The display turns off after a few minutes and shows 'No Signal'

  Hey guys, I was faced with a weird problem recently. My desktop monitor turns off by itself after a few minutes, but the works of CPU, I can hear the fan running and see the lights blink. One thing I noticed, is that when the screen turns off, the light Orange on the processor rest on which flashes normally just. My PC works normally on the mode without failure, but worse, safe mode, but I can't work on my software CorelDRAW. This may be the problem of SMPS? because recently, my entries of mouse and keyboard did not work due to which I got a USB keyboard and a mouse. I recently installed Windows 7 64 bit, but I think that shouldn't cause the problem since I have worked with Windows 64-bit before on the same machine.

  PC configuration-

  Intel Core 2 Duo 4500 @ 2.20 Ghz processor
  ASUS P5QPL-AM motherboard
  3 GB RAM
  No (not sure, maybe integrated) graphics card
  1 TB harddrive

  PS - I couldn't find an exact category for my problem.

  Hey Archer
  Currently, I formatted my Windows 7 and installed Windows 8 and am these problems persist. I have not upgraded but formatted my C drive and installed a fresh new copy of windows 8... so I thnk it may be a problem of the SMP. Can he?

  Hi sunny

  It can or mentioned being SMPS... the reason is... you have already said that the computer or the monitor works fine in safe mode! But since his past even when you install Windows 8,
  To make troubleshooting a
  1. go to the Bios and reset all default by selecting the optimum setting in the bios... Given that your motherboard has got characteristic overclocking and selection of the IGD... let him get by default...  Start the computer and check if the monitor turns off always.
  2. If step 1 does not solve your problem... then go to the power option in the control panel and select your power setting of the high-performance system where you can set your monitor to never go to sleep.  See what's happening... If the monitor still going to sleep even after this setting... then you have a problem with drivers or the motherboard... try updating the drivers and see if that helps.
  3. If the update of drivers did not help... so the next option is to review your material... try to get a replacement screen and see if this could solve this problem... A things you can deduct that if this also fails, then the obvious reason is that your monitor is ok... and problem must be the motherboard.
  4. Firstly check the display port... does it feel loose?
  a. do you have this port pins come out?
  b. your motherboard has two power connections (EATXPWR 24-pin and a 4-pin ATX 12V... are both connected?
  c. your SMP should be at least 400W according to recommendations from the manufacturer to you. Check this box...
  d. then ofcourcse obviously... Reinstall the Rams and other external devices.
  Follow these steps and let me know your comments for each

• Windows 8 Crash when the display is off

  I recently bought a HP with Windows 8.  I have 2 HP monitors.  When I select the power plan settings to have the display stops after a certain amount of time, windows stops and restarts my computer every time after that the monitors are automatically disabled.  I checked two monitors drivers and the system tells me that I have the latest drivers.  I chose a white screen saver in the meantime, but it is not turn the monitor off (no problem when I return to the computer after the screen saver running on empty).  When I choose 'Never' to turn off the display, I don't have a problem when I return to the computer (the computer has been sleep based on power settings).  I only have the problem when the monitor is turned off automatically according to the parameters of energy.  Any advice on how to fix?

  I've updated to 8.1 Windows and the problem seems to be resolved.   Thank you for your help.

• WIFI Disconnection as soon as the display turns off Z3

  Hello to all and my apologies if I did this wrong.

  My wifi connection should connect manually whenever my screen turns off. It connect fine, works fine, but as soon as I finished and the screen goes OFF... Hey Presto I need to manually connect to wifi again. It didn't used to do this and it is very annoying. Please give me some advice. I keep wifi during sleep in advance and I have a z3. Please someone help me solve this problem.

  Settings for power management. But I think you have some 3rd party in place applications. Have you installed any task killers?

• My computer will not sleep, the display shuts off for a while but the fan still works and the keyboard lights stay on, and then eventually he dies just

  Imen quite so much as the title, when I try to put my computer to sleep the screen turns off but the computer is still running. My computer is a HP pavilion dv6 is a little more than 3 years. He used to do whenever a while, but now it's every time I try to pause. I'll close the top cover, but the fan still works, the hp on the lid logo light remains lit, and if I reopen it cover the power light is always on and the lights on the keyboard caps lock and wireless keys. The same actions occur when I try to put it to sleep manually (from the start menu). It does not at all I have to do another that now hold power, but even when I do nothing, it will stay here like this for awhile and then just turn off completely.

  When it starts up, it gives me the options to start in safe mode or start normally, and when I am connected and it gives me the "windows has recovered from an unexpected shutdown", I see that there is a minidump file in windows that has something to do with it. I tried to search for the file and the problem together, and then each separately, but nothing I've seen described really my problem, so I thought I should just ask on my problem.

  I read what made other people, changing advanced power settings, changing the media settings, etc. and did those things, but to no avail. It's not a huge deal, because I can just turn off my computer whenever I'm done with it for now, but I don't know if it's a bad omen for the future of my poor computer. So if someone could give me a hand with this point in mind, I'd be very happy. Let me know if provide more details (OS, processor, my favorite color, social security number, etc.) that would make it easier to solve. Thank you
  Also, either by the way, if this is in the wrong forum topic, please let me know.

  If you use a wireless keyboard or mouse to your computer, these items can keep your computer enter standby mode automatically because they constantly send a signal to the system, thus preventing downtime. An optical mouse (that changes color) causing a similar problem.

  • 1

    Click "Start," "Control Panel", "'material and his ' and 'Device Manager'."

  • 2

    Double-click "Network adapters", then right-click on your network device. Click 'properties '.

  • Sponsored links

    • Analysis software of CAN

      Economic and powerful CAN bus analysis and diagnostic software.

  www.CANCapture.com

• 3

  Click on the "Advanced" tab and scroll down the list of 'Property' to find all entries beginning with "Wake up" or "Wake up" in the entry. Click once on these entries and in the drop down box at the top right make sure it says 'None' or 'off '.

• 4

  Click the "Power Management" tab at the top and make sure that the "allow this device to wake up the computer"is not checked. " Click on 'OK '.

Mouse

• 5

  Open Device Manager, as above, and then double-click "Mouse" or 'mice and other pointing devices' right click of your mouse, and click 'properties '.

• 6

  Click the "Power management" tab and make sure that the "allow this device to wake the computer" is disabled.

• Only in Illustrator: file/open "Preview" Panel is out of control in large. The display turns off. How can I control it?

  This should be a problem Apple FInder, but it only happens in Illustrator: if I open AICC, then press command-Open and get several predictable column of the files directory, then go to the right column, a list of graphic files, an Illustrator, a Photoshop, the Preview Panel is so big that the preview itself is there, but out of sight , off the screen, somewhere to the right. I know enough to expand and reduce look horizontally, column by using the angle at the bottom right of the column of directory, but this does not seem to matter. The preview does not appear unless I scroll as much right as I can and drag it. Literally, I can't see the preview of the file that I am after without seeking a large empty space for him. This all sounds stupid, I know, but this should not happen. Any ideas?

  This is a bug. Please read one of the dozens of discussions on the subject in this forum.

• Brightness of the display turns off to

  I have an Asus UX50V notebook and vista home premium 64-bit. The brightness of my screen fades. It is clear to decrease intensity on each 30 seonds. Help, please!

  Hello famuchic, welcome.

  To develop which says Halima, if the driver update does not work, you can check with ASUS to make sure this isn't a hardware problem. There might be a problem with LCD backlighting, or maybe a bug in the BIOS. ASUS may have specific information for you and chances are that if other users have encountered problems with this series, ASUS will be able to provide you with instructions on how to solve the problem.

  Have a good one,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• music mute app while the display turns off.

  There is a musical project of my hand.

  but the app still mute when the screen will Dim (the playbook in standby mode).

  How to fix coding or config?

  If the screen should be forced to stay in your application (unlikely) then you want to investigate NativeApplication.nativeApplication.systemIdleMode.

  If weather is nice, the screen darkens and the PlayBook goes into sleep mode, but you want your application to continue to play the same music in this case, you want to study QNXSystem.system.inactivePowerMode.

  I posted awhile back with a summary of this feature , and a link to the Knowledge Base article on this subject.

• After leaving the screen saver, display shuts off and change to select the user account screen

  I have a windows7 32 bit desktop. While everything works fine the problem is whenever I leave the keyboard and mouse intact even for one minute, the display turns off and change to select the screen of the user. 'Disable the display' and "put the computer to sleep" has been on 'never' and screen saver changed nothing but the problem still persists.

  Please provide the solution

  Hi Sam,

  Sorry for the late reply.

  I understand that when your computer is left idle, the select user screen appears.

  The issue can be caused if the power plan settings are incorrect.

  To get a better understanding of the issue, I want to know:

  1. What is the brand and model of your computer?
  2. You did it changes on your computer before this problem?

  To resolve the problem, try the following methods:

  Method 1: Troubleshooting to be able to run.

  The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  After trying method 1, if the problem persists, try Method 2.

  Note: When you're done, restart your computer and check if your computer works fine. If the problem persists, try Method 2.

  Method 2: Change the screensaver settings.

  I suggest you follow also the suggestion given in the answer by Vijay B answered the

  May 14, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/disable-automatic-lock-with-Windows-7/1d45e806-6a8a-492C-A0C7-ac85b759ad66

  Please, try the above suggestions and we provide the information required so that we can help you.

• 4540 proBook s how to disable the display without closing the lid

  Hi, I have a probook 4540, windows 7 the runing, the problem is that I want to turn off the screen when I use m not especially when on battery to save energy. I don't like rubbing the cover whenewer I need done does anyone know an alternative to the closure of the screen?

  before this laptop, I had an acer aspire 5733. It has a function key fn + f6 Wick off the screen, unfortunately, the hp company had no idea of tis, for example, the fn + f5 is useless because in windows you can lock the computer by pressing the windows key + L logo

  A good solution for this push windows Mobility Center (Windows key + X) to include a screen off button.

  Packages were conducted in time of Vista but work fine on W7 all flavours & Bit.

  Link below includes the download 32-bit (x 86) & 64 Bit(x64) as well as some info & screenshots.

  http://www.iStartedSomething.com/20071221/extending-mobility-Center-tile/

  Once installed, you can use the link in the center of mobility turns off the screen or you can find the display file - off installation .exe & map to a hotkey, shortcut on the desktop or PIN to the taskbar etc... jobs sold...

  Make a rocking good BT also mobility tile.