Ignorance of R3 USB C 17-inch

Similar Questions

• I want to connect to my old ssd used in my old pc to laptop.how is possible?

  Tell me by usb or any other port?

  Buy a USB 2.5 inch SATA enclosure and that mount your SSD.

• Difference between left and right usb ports 2015 15-inch model.

  I recently bought a 2015 15 inch macbook pro with 2.5 GHz processor and 512 GB hard drive. IV used for only one month and I notice a difference between the left and right usbs. The base of the left usb IE the metal connector pins seem to be lower compared to the usb on the right side. Usb port on the left also seems to be a bit looser than the right, but hardly noticeable. IV barely used the usb ports and would like to know if it's the same for the other macbook pro users with the same model.

  The game is a concern, and I would take the computer to Apple for review. After all, you are covered by the warranty.

  My current MBP is that a 13 inch 2012 has only USB ports on the left side. My previous was a pre-Unibody 15 inches and I have not noticed differences in fit / release between the right and left USB ports.

• Windows 7 Starter Edition ignoring newly plugged in USB 2.0 optical drive

  My system is as follows...

  ASUS EeePC X101CH
  Intel Atom N2600 processor. 1.60 GHz
  1 GB OF RAM
  Windows 7 Starter 32-bit
  Service Pack 1
  .. .and I try 'plug & play' the next optical drive...

  Blu - Ray Burner laptop Samsung SE-506CB/RSBDE (USB 2.0)
  .. What is completely ignored.  I tried to put disks in there - the drive open and close and spin upward, as you would expect, but it is completely ignored by Windows!  Plug the USB cable produces no response - not even in the Device Manager.  USB plug & play works great on other things, like drives flash, mouse, etc., but not on this.

  It's the third optical drive to external USB 2 I've tried.  The first two were a lesser specification, and I picked up their very cheap, so I thought "you get what you pay for", right?  The first was dead as a stiff - it has absolutely nothing, so I threw.  The other triggered at least detection code plug-and-play USB, which is supposed to install automatically - but he did not install correctly in the end.  After trying and trying... and leave it plugged during the re-booting, etc...  All to nothing does not.

  So I decided to buy this last Blu - Ray USB external hard drive (which cost more than twice the two other combined!) thinking this will surely work correctly at least.  But Windows 7 does not yet seem to shake hands with her!

  Anyone have any ideas?

  Thanks a lot for this amazingly comprehensive reply Hakanwar!

  I was fine it and found it very informative.  Some of the avenues I had already tried, and some I consider even earlier.  I'll keep your answer and refer to it if I have a similar problem again.

  But, alas!  The case seems to have fixed itself somehow the new optical drive has finally been detected and I've been able to tell, it is fully functional!  I'm still trying to understand what I did to make it work.  What I did (in response to a suggestion that I've seen in a community post on a related topic) was to download a few utility programs (DevManView and USBDeview) of Nirsoft.com and run them on my system.  I then connected the optical drive via its microUSB cable once again and - Lo and behold! -He was there, and I was running!  Common sense would thought he could not have been the utility programs that makes the disc visible.  So all I can think is that maybe the USB cable not had not been connected properly when I tried earlier.  I remember try several times, and the Clank of the connection about to ensure that she was sitting properly.  But it was not only detect.  Maybe there are 2 'stages' or 'steps' to this type of connector, because (I'm not sure), but it could have a little more deeply he did before and more firmly in place.  I can't just be sure - and now I'm almost worried to disconnect in case he stops working again!  It makes me feel like a fool, if this is really the cause of the problem.  But it's weird, because the road turned upwards before and LED to this subject was the lighting, but it was as if she wasn't there that Windows is concerned.

  In any case, thank you for your kind assistance and the other guy who suggested the Nirsoft utilities - they could be useful in the future, because they are waaaaay more complete than Device Manager.

  Concerning

• USB 3.0 Desktop 3.5 inch external hard drive

  How can a USB 3.0 only and a normal hard drive cannot?

  Depends on what a "normal"hard drive"is.

  Much video edited these days is HD or 4K.

  These require the fast disks on the flow of files.

  In a Word, the speed.

  Al

• Why should I restart Macbook 2015 for the control of USB 3 inch to go up?

  Type A USB seems to go well when connected via an adapter USB 3 port C. But using the same USB adapter C 3 if I connect a flash USB 3 drive I have to restart for the drive to mount.

  I called Apple Support and they told me how to solve this problem. He was supposed to have been fixed in OS X 10.11.4 but it did not in all cases. If you have a problem Support call.

• Z580 ignores USB and boots directly to Win8

  Hello Lenovo community...

  I have a Z580 ideapad I bought around a month ago, I can get into the boot menu from the Start button Bios (next), but when I select a USB drive with a Bootable Ubuntu Image, it does not take into account my selection and instead starts in Windows 8. Changing the order in the BIOS to boot from USB was first of all the same result.

  If so, Ubuntu 10.04 version and starts fine on USB on my netbook.

  Any help would be appreciated!

  Thanks, Seb

  Hello and welcome,

  Try this: go into the BIOS, disable startup secure, select Startup inherited or UEFI + legacy.

  Z.

• Support of USB 3.0?

  I tried to mount a USB3.0 drive in a virtual machine on my MBP (mid-2012, OSX 10.8.3) but I get the following error before it happens even to the virtual machine:

  The "XXX" device failed to connect to its ideal host controller. An attempt will be to connect this device to the available host controller. This could result in undefined behavior for this device.

  This bug exists in VMware Fusion 5.0.3 and severe a pain. I've searched the forums and notes version, and the closer, I could find was of: VMware Fusion 5 and VMware Fusion 5 Professional Release Notes

  Unable to start a VM from USB 3.0 on MacBook Air 5.1 devices
  You may not be able to start a virtual machine from the devices USB 3.0 on MacBook Air 5.1.
  When you attach a USB 3.0 device, you see the error message the device 'XXX' could not connect to its ideal host controller. An attempt will be to connect this device to the available host controller. This could result in undefined behavior for this device.

  You can ignore the error message and the installation of the OS on the USB device. However, after restarting the virtual machine, the USB 3.0 device does not appear in the Start Menu.

  Solution: Use a USB 2.0 as a replacement device.

  Although I'm not trying to boot from USB, I always get this error. This means that the USB 3 devices are not supported? If they are supposed to work, how can I file a bug?  If they are not supported, is there a roadmap or some sort of indication of when we might be able to use USB 3 devices?

  Thank you

  IvarREW

  > The 'XXX' machine could not connect to its ideal host controller. An attempt will be to connect this device to the available host controller. This could result in undefined behavior for this device.

  Before connect you the USB 3.0 device to Debian 7 GOS, you must configure your USB controller 3.0 by hand, referring to the following Action Plan:

  Action plan

  =========

  1. turn off the power GOS Debian.

  2. click on settings ==> USB & Bluetooth, you would see the inserted USB device detected.

  3. go in the advanced options USB,.

  . USB compatibility: USB 3.0

  . VMware Fusion must: connect to this virtual machine

  4. again turn on the VM Debian and lsusb output, check if the USB 3.0 device works or not.

  If it does not always, thank you to upload your package of journal of fusion vm-support us.

  In addition, it works with my side under environment.

  Test environment

  =============

  Mac hardware: MacBook Pro 13 inch 2012 mi

  Mac OS X: 10.8

  Fusion: 6.0 TP1

  GOS: Debian 7.0 (kernel: 3.2.0 - 4-amd64)

  lsusb output:

  VMware@Debian:~$ lsusb | grep 'Bus 002'

  Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

  Bus 004 Device 002: ID 125f:312 b A-DATA Technology Co., Ltd. Superrior S102 Pro

  Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virutal USB Hub.

  ...

  Best regards

  Shanghai

• Can I create a recovery bootable USB through disk utility?

  My HARD drive is dying, I can't access my Macintosh HD partition anymore and I can't reinstall OS because I SMART errors. Before the format and reinstall the attempt to load slow my computer, random errors, etc. So I definitely think that the HARD drive is near death. My plan is to replace my HDD for a Virgin SSD, I perform this task several times on computers of the victory but for MAC, I wonder how I will load the new OS. Can I make a bootable USB with the recovery partition, but on a USB key tools? Unofrtunately I have more available Mac to create the USB bootable through itunes.

  My computer is the MacBook Pro (13-inch mid 2010), I have also all original packaging somewhere, if there is a CD that I can use, I certainly can get too.

  Any advice?

  Thank you!

  Apple have this to do a USB installation...

  Create an installer for OS X - Apple support bootable

  Another option is to use the diskmakerx.com application

  You must have the OS installer downloaded to make these methods of work is probably not practice on your failed drive.

  Both of these options are to run a 'normal' operating system too. The recovery partition is not 'normal '.

  Another option is to use the Internet recovery mode if your Mac supports...

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  On macOS recovery - Apple Support

  Use wired ethernet for best results, since it will download a bootable OS & then download the installer of the OS also.

  I suspect you have the update of the firmware installed to add this feature if it has been updated over the last 3 years

  You may be able to generate a score of alternative recovery to another disk (such as a USB key) If you want to just "compensation of base OS.

  OS X: on Recovery Disk Wizard - Apple Support

  A last solution would be to clone your drive failing on an external drive (or use the new SSD in a proper case). That can be done in the modes of recovery via disk utility. Basically, you use a feature to "restore" to clone one volume to another. (I don't see clear instructions for the moment so ask if you want to pursue this option).

• record online audio on the iMac 27-inch with screen Retina 5 K?

  How can I record a quality online on my

  iMac 27-inch with screen Retina 5 K?

  Any suggestions?

  

  So from what I can tell the model have built in analog audio input, you would probably need some kind of third-party USB audio interface. You may be able to record in mono with a suitable adapter because the port is apparently compatible with Apple headphones for example.

  TT2

• Suddenly keyboard does not not, always on fans and pressing alt restarts the macbook pro 13 inch mid 2012

  So, I was on my macbook pro when I decided to close it out. Later, when I came back, I opened it and fans began to work hard, that I tried to enter my password, but the keyboard is not responding, so I plugged a keyboard external usb and I have finally started my session, but I noticed an X on my battery indicator and the message "no battery available.

  I have notticed that the ALT key on the MacBook pro keyboard, restarts the computer whenever you press it

  any idea of what disease? Key on the keyboard is not responding, Alt will restart the mac, fans of strong, cold material work, when I plug the charger in light barely there

  I tried disconecting the battery, reset the SMC and PRAM seems impossible due to the alt, restart problem

  Macboock pro 13 inch mid-2012

  SOS

  Have you tried booting in Safe Mode? If you can start check safe mode to see if the problems you described have stopped. If they are stopped, and then restart the computer normally. What happens then?

• USB 3.0 for macbook pro

  What is the best option to add a USB 3.0 for the port of mini extension on a 17 inch end 2011 Macbook Pro?

  If your computer has no com with 3 USB ports you can improve not USB 3. USB 3 devices are backward compatible, so that they will connect to your USB 2 ports and operate at the speed of the USB 2. You can connect to a USB 3 hub on your computer, but it will operate at USB 2 speed unless you connect it to a USB 3 port on your computer.

• Mounting USB keyboard freezes internal keyboard and trackpad

  Hello world

  Spent an hour looking for a solution to this so I hope this isn't a problem of repetition. I am using a wired USB keyboard (DYNEX model No.: DX-WKBDSL) with my MBP end 2011, but whenever I have set and keyboard Setup Assistant appears my internal trackpad immediately stops responding and my internal keyboard sounds fair to me if I tap on a button. This keeps me from hitting continue setting. If I unplug the USB keyboard, I immediately regain control of my internal input devices. Disks hard USB and flash drives cause no problems. I need to be able to use my usb full keyboard, so I have a 10 key. Can someone help me?

  I noticed the guys like the thing EtreCheck here so I just ran on my machine (obviously without my keyboard usb attached since that would freeze everything). I hope that helps!

  EtreCheck version: 2.9.13 (267)

  Report generated 2016-08-18 10:55:47

  Download EtreCheck from https://etrecheck.com

  Time 04:12

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Hardware Information: ⓘ

  MacBook Pro (13 inch, late 2011)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro8, 1

  1 2.8 GHz Intel Core i7 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 588

  Video information: ⓘ

  Intel HD Graphics 3000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.6 15G (31) - time since started: about 31 days

  Disc information: ⓘ

  APPLE HDD HTS547575A9E384 Disk0: (750,16 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 748,93 go-go (559,33 free)

  Storage of carrots: disk0s2 749.30 GB Online

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Computer, Inc. Apple IR receiver.

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. ZTE.driver.ZTEUSBCDCACMData (ZTEDriver_MacV1.3.9 - 2016-07-18) [Support]

  [no charge] com.devguru.driver.PTUMWDrv (1.2.64230.128 - 2016-07-18) [Support]

  [no charge] com.lge.driver.LGEMobilSolutionFamily (1.5.4.0421 - 2016-07-18) [Support]

  [no charge] com.novatelwireless.kext.wwan (v3.0.24 (001)-2016-07-18) [Support]

  [no charge] com.pantech.driver.PTRayUSBFamily (1.1.7.0616 - 2016-07-18) [Support]

  com.sierrawireless.driver.SierraDevSupport [no charge] (2.0.2.0 - 2016-07-18) [Support]

  com.sierrawireless.driver.SierraFSCSupport [no charge] (2.0.2.0 - 2016-07-18) [Support]

  com.sierrawireless.driver.SierraFSRSupport [no charge] (2.0.2.0 - 2016-07-18) [Support]

  com.sierrawireless.driver.SierraHSRSupport [no charge] (2.0.2.0 - 2016-07-18) [Support]

  com.smithmicro.driver.SMSIWirelessModem [no charge] (3.2.7 - 2016-07-18) [Support]

  /System/Library/Extensions/LGEMobileSolutionFamily.kext/contents/plugins

  [no charge] com.lge.driver.LGELTEBus (1.5.4.0421 - 2011-06-21) [Support]

  [no charge] com.lge.driver.LGELTEMdmControl (1.5.4.0421 - 2011-06-21) [Support]

  [no charge] com.lge.driver.LGELTEMdmData (1.5.4.0421 - 2011-06-21) [Support]

  [no charge] com.lge.driver.LGELTENicControl (1.5.4.0421 - 2011-06-21) [Support]

  [no charge] com.lge.driver.LGELTENicData (1.5.4.0421 - 2011-06-21) [Support]

  /System/Library/Extensions/NovatelWirelessWWAN.kext/contents/plugins

  com [no charge]. NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (v3.0.24 (001)-2011-06-21) [Support]

  com [no charge]. NovatelWireless.driver.NovatelWirelessUSBCDCECMData (v3.0.24 (001)-2011-06-21) [Support]

  [no charge] com.novatelwireless.driver.3G (v3.0.24 (001)-2011-06-21) [Support]

  [no charge] com.novatelwireless.driver.3GData (v3.0.24 (001)-2011-06-21) [Support]

  [no charge] com.novatelwireless.driver.DisableAutoInstall (v3.0.24 (001)-2011-06-21) [Support]

  [no charge] com.novatelwireless.driver.NWVBE (v3.0.24 (001)-2011-06-21) [Support]

  /System/Library/Extensions/PTRayUSBFamily.kext/contents/plugins

  [no charge] com.pantech.driver.PantechBus (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.PantechCDFree (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.PantechCm (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.PantechMdmControl (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.PantechMdmData (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.PantechSer (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.QmiDriver (1.1.7.0616 - 2011-06-21) [Support]

  /System/Library/Extensions/PTUMWDrv.kext/contents/plugins

  [no charge] com.devguru.driver.PTUMWCDFree (1.2.64230.128 - 2011-06-21) [Support]

  [no charge] com.devguru.driver.PTUMWCSP (1.2.64230.128 - 2011-06-21) [Support]

  [no charge] com.devguru.driver.PTUMWDIAG (1.2.64230.128 - 2011-06-21) [Support]

  [no charge] com.devguru.driver.PTUMWMdmControl (1.2.64230.128 - 2011-06-21) [Support]

  [no charge] com.devguru.driver.PTUMWMdmData (1.2.64230.128 - 2011-06-21) [Support]

  [no charge] com.devguru.driver.PTUMWUSBMergeNub (1.2.64230.128 - 2011-06-21) [Support]

  /System/Library/Extensions/SMSIWirelessModem.kext/contents/plugins

  com.smithmicro.driver.SMSIWirelessCDC [no charge] (3.2.7 - 2011-06-21) [Support]

  com.smithmicro.driver.SMSIWirelessSerial [no charge] (3.2.7 - 2011-06-21) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 145 tasks Apple

  [operation] 63 tasks Apple

  [killed] 22 tasks Apple

  the 22 killed process lack of RAM

  Launch system demons: ⓘ

  com.Apple.Security.syspolicy.plist [failure]

  [loaded] 48 tasks Apple

  [loading] 150 tasks Apple

  [operation] 80 tasks Apple

  [killed] 12 tasks Apple

  12 killed process lack of RAM

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2014-02-01) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11) [Support]

  [no charge] com.oracle.java.Java - Updater.plist [Support]

  [operation] com.rosettastone.rosettastonedaemon.plist (2014-12-26) [Support]

  [loading] org.macosforge.xquartz.startx.plist (2014-08-11) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist (2012-06-10) [Support]

  [failure] com.adobe.fpsaud.plist (2016-06-13) [Support]

  [loading] com.google.keystone.daemon.plist (2016-07-11) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [no charge] com.oracle.java.Helper - Tool.plist [Support]

  [loading] org.macosforge.xquartz.privileged_startx.plist (2014-08-11) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2012-06-10) [Support]

  [loading] com.adobe.ARM. [...]. plist (2013-11-11) [Support]

  [loading] com.adobe.ARM. [...]. plist (2015-05-19) [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

  [operation] com.spotify.webhelper.plist (2016-07-05) [Support]

  [loading] com.vladalexa.MagicPrefs.plist (2016-07-18) [Support]

  Items in user login: ⓘ

  smcFanControl Application (/ Applications/smcFanControl.app)

  Workflow application (/ Applications/Flux.app)

  Stickies application (/ Applications/Stickies.app)

  Other applications: ⓘ

  [operation] com.adobe.PDApp.AAMUpdatesNotifier.65632.B69CDC4F-01B7-4A73-8B33-DA81B56745F1

  [ongoing] com.eidac.smcFanControl2.63392

  [ongoing] com.etresoft.EtreCheck.108192

  [ongoing] com.microsoft.Excel.55392

  [ongoing] com.microsoft.Office365Service.60192

  [ongoing] com.microsoft.Word.56032

  [ongoing] com.Microsoft.AutoUpdate.FBA.2912

  [ongoing] org.herf.Flux.88992

  [loading] 435 tasks Apple

  [operation] 177 tasks Apple

  [killed] 39 tasks Apple

  Plug-ins Internet: ⓘ

  AdobeExManDetect: AdobeExManDetect 1.1.0.0 - SDK 10.7 (2014-02-01) [Support]

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-07-06) [Support]

  QuickTime Plugin: 7.7.3 (2016-07-18)

  AdobePDFViewerNPAPI: 11.0.11 - SDK 10.6 (2015-05-13) [Support]

  AdobePDFViewer: 11.0.11 - SDK 10.6 (2015-05-13) [Support]

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-07-06) obsolete! Update

  Default browser: 601 - SDK 10.11 (2016-07-18)

  SharePointBrowserPlugin: 14.4.5 - SDK 10.6 (2014-10-28) [Support]

  Silverlight: 5.1.40728.0 - SDK 10.6 (2015-09-28) [Support]

  DirectorShockwave: 12.2.0r162 - SDK 10.6 (2015-08-31) [Support]

  JavaAppletPlugin: 15.0.1 - 10.7 (2016-07-20) check the version of the SDK

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2015-11-22)

  3rd party preference panes: ⓘ

  Flash Player (2016-06-13) [Support]

  MagicPrefs (2012-10-17) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  7% com.apple.WebKit.WebContent (4)

  4% safari

  kernel_task 2%

  1% WindowServer

  1% systemstatsd

  Top of page process of memory: ⓘ

  754 MB com.apple.WebKit.WebContent (4)

  523 MB kernel_task

  Safari of 303 MB

  Mdworker (10) 123 MB

  90 MB softwareupdated

  Virtual memory information: ⓘ

  68 MB free RAM

  used 3.93 GB RAM (620 MB cache)

  406 MB used Swap

  Bumping this because I really need an answer.

• Card SD &amp; USB issues after update of El Capitan

  Hi all!

  Just updated to Yosemite's El Capitan.  Running iMac (21.5 inch late 2009) - to update of Yosemite point has been completely up to date as well as all software and drivers.  Now problems after the iMac to wake up in the morning with some of the built-in ports.

  1. SD card reader - have to restart so that this works, but only works for an hour or two, it is more readings.

  2 ports USB - external HD holding that nothing else than music files must be disconnected and then reconnected to be recognized and to mount.  Anomaly is that Time Machine on back of the iMac USB continues to function properly and rises when waking from sleep in the morning.

  3-4 ports USB hub plugged back has only 2 operational ports in the morning, must either be disconnected and then reconnected to have all four ports work.  It works sometimes for the rest of the day or only works for one hour UX as well.

  4 keyboard (yes I prefer a cable on BT) takes a minute or two to be recognized after the awakening of fashion 'sleep' in the morning.

  I tried to reboot my machine?  Yes, several times.

  I tried to reset the SMC?  Yes, several times.

  I tried to reset the NVRAM/PRAM memory?  Yes, several times.

  Any suggestions on additional solutions without getting really heavy in the Terminal?  Not really keen to try some of the recommendations Terminal found here on communities, as I do not play with the programming of the OS.

  Thank you!

  Thanks for the nine people who have seen this post.  Unfortunately no one answered, so I 'solved it' of it the only way I knew how.  Rolled back to Yosemite.  I hope that the new Sierra OS will be an improvement on El Capitan.

• How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan

  Hello! How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan?

  I read everything I could on the subject and could not get the Boot Camp Assistant to create the USB key. Can you help me?

  Boot Camp Version 6.0.1

  If you run the wizard of BC, are you give the possibility to create an installer from USB? Did you change Bootcamp Info.plist file?