ILÇE-6000

Similar Questions

• Intel hd 6000 2 Shogun

  I have 2 "granaries", 4 GB of ram (4 GB x 2 = 8 GB) and the said requirements I need a card Intel hd 4000 for 8 GB of ram, but I have 2 x 4 GB with Intel hd 6000, this is not a problem really I think

  Max your system memory and your graphics card has nothing to do with the other

• Boot volume inaccessible when trying to install W2000 - 6000 SP

  We bought a Satellite Pro 6000 for work and it had Windows XP. The devices we use with it require Windows 2000 so I uninstalled Windows XP with the startup disk and started the installation of Windows 2000 using a USB floppy drive. Once the first 4 discs have been run and the CD starts as a blue screen appears showing the inaccessible boot volume.

  Any ideas of what hurts?

  Hello

  Use you able to install WXP recovery CD? Is there a message inaccessible boot volume or the inaccessible boot device?

  By the way here's something very useful for users to W2K
  http://mcpmag.com/features/article.asp?EditorialsID=133

  Good bye

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

• HP Compaq 6000 Pro AT492AV: Serial Port PCI Driver help - HP 6000 AT492AV Windows XP Pro

  Due to former software compatibility issues, I run Win XP on my computer HP Compaq 6000 Pro AT492AV.  I installed a new copy of XP OEM and have solved all driver except for 2 problems:

  (1) PCI Serial Port, here's the info from Device Manager:

  PCI serial port

  PCI bus 0, device 3, function 3

  PCI\VEN_8086 & DEV_2E17 & SUBSYS_3048103C & REV_03
  PCI\VEN_8086 & DEV_2E17 & SUBSYS_3048103C
  PCI\VEN_8086 & DEV_2E17 & CC_070002
  PCI\VEN_8086 & DEV_2E17 & CC_0700

  (2) unknown Device, here's the info from Device Manager:

  Controller of Interface LPC Intel(r) ICH10D - 3A1A

  ACPI\IFX0102
  * IFX0102

  I'd appreciate any help you can provide!

  All the best

  Hello:

  You need these drivers for devices...

  1.

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45367.exe

  2.

  This package provides the device driver for the Infineon Trusted Platform
  Module (TPM 1.2) in office supported running models taken Microsoft support
  Windows XP operating system.
  
  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40553.exe

• Cannot find the drivers of Windows XP Home for Satellite Pro 6000

  I have a Satellite of 6000 Pro that I can not find a driver for Windows XP pro cd to. It doesn't seem like anything is downloadable on the website of europe which will help me in the completion of the plant, that is

  Graphics and sound card drivers - I tried to download Realtek 97 driver for sound, but appears not to have taken. Does anyone know of a way to get the drivers on CD, or if there is an image that I can download?

  Hello

  All the drivers of Windows XP Home edition are available. Please see the download page again. Under product type, choose ARCHIVE.
  All that s!

• Satellite Pro 6000: video controller - driver compatible vga

  Hello

  I have a Satellite Pro 6000 but I can't watch DVD because they run very slowly.
  That's probably because my video controller is not installed, but I can't find a
  Driver video controller for a 6000 SP. My OS is XP.
  Can someone help me?
  Thank you

  Hello

  You need to install the Trident display driver. You can find it on the European driver Toshiba page in the Archive folder.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Choose Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000-> Win XP

  By the way; You must use a special software like PowerDVD or WinDVD to play and watch DVD movies!

• Satellite Pro 6000 continuous beep and do not post

  Hello

  I downloaded the latest version of the BIOS on the Toshiba site and everything seems to work properly (using the traditional method). The laptop is automatically restarted but the screen remains blank and there is a constant tone of the speaker.

  No key seems to have no effect, but if I hold down the key which brings to updae BIOS screen appears and I can load the new BIOS files.

  Can someone help me with this or someone has the original BIOS for 6000?

  Model: PS600E-207PG-FR

  Hello

  check in the bottom of the unit if you really a SP6000 or if it's a 6050 6070 or another thing.
  There may be differences in the BIOS.
  Normally it should not be possible to 'install' bad BIOS, but maybe there could be a 'glitch '...

  BR

  Tom

• Satellite Pro 6000 won't start or do something

  Hello

  My satellite pro 6000 stopped working all of a sudden.
  Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
  Also tried the back button back in case but no tip was not all good.
  It just won't start at all.

  Any ideas out there?

  Thank you

  [Edited by: moderation of the Forum]

  Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

• Damaged BIOS 1 - Satellite Pro 6000 block

  Hi all

  I bought a laptop, a Satellite Pro 6000, but after a few weeks, he refused to start and gave me the bios message 1 damaged block.

  I downloaded the update to bios on the toshiba site, but it does not work.
  I have an external floppydisc. When I put the .exe to upgrade the bios on a floppy disk and turn on the laptop with the ~ button, I get the message "ready for the update of the bios, place the update disk and press any key when ready."
  I can hear the disk is searched, but nothing happened.

  How do I update the bios or is there something else wrong?
  Any help would be appreciated!

  In my opinion with the BIOS update you can't do anything wrong.
  If you BIOS, update by following the procedure described in the document FAQ Toshiba and the BIOS update can not be done properly, I'm afraid there is a problem with the BIOS chip and it may be defective.

  I can't say for sure, but if the BIOS chip is damaged, then you have a big problem.

• Sat Pro 6000 - need DVD decoder

  I've owned my trusty Satellite Pro 6000 for nearly 6 years. I had to use the recovery disks, then reformat back to factory settings. Now, I am unable to play DVD? s, I wonder for the decoder.

  Why this request is doing now? This can be downloaded?

  Do you mean on original DVD? What application you use to play movies on DVD?

• Satellite Pro 6000 will not boot

  Hi all

  I have a 6000 Pro Satellite which is quite old, but until yesterday it was working fine. Today, it no longer starts. The lights are on (220v:green / power: Green / battery: orange), but the BIOS or the operating system does not start. Fan does not work either. The FN key seems to work - if I press it, the indicator light below the F11. If I press and hold the power button the power light turns off.

  I removed the battery to see if that would help, but it basically gives the save result (or not).

  Is it possible to do a hard reset? Or is it curtains for this laptop?

  You want to know your opinion on this one.
  JP

  Hello

  Try unplugging the power adapter and remove the battery the laptop for a while leave. Wait 20 - 30 minutes, reconnect all the pieces and try to start.
  If it won't work, I guess the hardware laptop works bad maybe that it s a motherboard (ESF) failure or the CPU.
  Who knows. Without any hardware tests is not easy to know which device is malfunctioning

• Satellite Pro 6000 - how can I update the BIOS?

  Hi all

  I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

  I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

  My questions:
  * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
  * Is it possible to update the BIOS with the same version of Windows?

  Or perhaps there is another solution for this problem? Has no need to update my BIOS?

  Thank you.

  Hans

  Hello

  I agree with Luke.
  The rom Bios module seems to be damage.
  Either it must be replaced or flashed again.

  But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

  You last chance is an ASP that could check the BIOS ROM.
  As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.

• Satellite Pro 6000-&gt; led power failure blinking

  Hello

  I recently bought a 2nd hand 6000 Pro for my wife to use. After less than three weeks, he has developed a fault, by which she is being held for so long and then just turned off. This is regardless of the power source - battery or one adapter.

  Sometimes it will last 20 minutes or more, other times he'll do it right away - power, two or three seconds and distributed.
  Power led blinking (Amber) in a sequence of 8, which gives the error code. 1 being one long blink and 0 being short is: 10001001. Reverse it gives 10010001 = 91 h hex? The research on the net I found that 91 h means "1R5 - E1V voltage is not more than 1.275V when the computer is turned on" so I guess that would exclude the video card and laptop computer needs service?

  If it's a case of having to reinstall the video card, it is a particularly difficult task? I found a site that shows how the band down a 6100 and I am happy to give it a go, but if it's the related power then I don't see much sense.

  Thanks to all who read this and I value any help...

  Post edited by: Phree

  Hello

  First of all I am very impressed with your PC knowledge and can simply confirm that there is some problem with electronic card. I must also say that it isn't best idea to do something alone. Because of the design sensitive laptop disassembly can be very risky for people without sufficient knowledge or maintenance manuals.

  OK if you found the instructions somewhere on the net, you can try, but if something is not the whole situation can be just get worse than before. Because of this I recommend you contact the service. Talk with them and you will see what they say. Ask how much you should pay for the repair.

• Satellite Pro 6000 and Windows Vista

  I bought a Satellite Pro 6000 and I want to put Windows Vista on it. I did an Upgrade Advisor and I was told that this graphics card will not work. Is this true?

  Thanks, Nick

  I'm afraid that's true. Satellite Pro 6000 is old enough for laptop and it will not supported in Vista. Install Windows XP Home edition and enjoy your life.

• What are Satellite Pro 6000-compatible DVD - RW drives

  Hello

  Can someone tell me which dvd rw is compatible with the satellite pro 6000?

  Hello

  It is always difficult to find information on compatible drives due to different master / slave and c - salt settings.
  In my knowledge don Toshiba user manuals t provide such information. OK, I put t know if all don t user manual provide this, but I've found this info in my user manual.

  However. I studied a little someone suggested that the Toshiba SD-R6372 dvd recorder is compatible with Satellite Pro 6000/6100 units.
  I found this on a very popular online auctioneers ;)