Illustrator complete failure

Similar Questions

• 10.11.5 install impossible to complete failure to restart on MBP early 2015

  MBP early 2015 with OS X 10.11.4

  Started the 10.11.5 update, it freezes during the restart of the installation phase. You leave by using ctrl-cmd-eject

  After that restart attempts to restart the installation ends in the same way, Frost during the restart process

  Tried to do a complete reinstall of a new USB - similar results.

  Return to 10.11 - stop/restart still suspended

  I suspect some updates of the firmware included in 10.11.5 could be the cause

  If you have a backup, start on recovery Volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run disk utility, then select first aid. Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system. Try the update by using the update from the drop-down list. Restore your data.

  OS X recovery

  OS X recovery (2)

  10.11.5 combo update

• Complete failure of adgentns.pl during Adcfgclone.pl AppsTier 89%

  HI Pros,

  EBiz Applcaition R12.1.3 LMO oracle enterprise Linux.

  Cloning sucessfully completed the database and erroneous adcfgclone.pl appstier running on with adgentns.pl.

  Logfile show autoconfig error. Can anyone help on this please.

  No errors in the automatic configuration of database service and no listener file generated in tns_admin appstier

  Tried the underside of work force.

  exec FND_CONC_CLONE.setup_clean;

  reruning dbtier autoconfiguration; sucessful

  rerun appstier autoconfig: failed with the same questions.

  FYI

  tail log Cloning file fo

  Clone of fast running with the command:

  Running:
  ...............................

  Start application layer apply - sea may 20 09:52:16 2015

  ............/.. / JRE/bin/Java-Xmx600M-DCONTEXT_VALIDATED = true-Doracle.installer.oui_loc=/oui-.

  ApplyAppsTier ...comn/clone - showProgress
  Password APPS: log file location A.../admin/log/applyappstier_05200952.log
  -89% finished

  
  ERROR when executing apply...
  May 20 at 10:03:23 sea 2015

  ERROR: Failed d'executer.../apps/apps_st/comn/clone/bin/adclone.pl

  Check the log file.

  Autoconfig errorlog file...

  
  [INSTALLATION STAGE]
  AutoConfig could not successfully run the following scripts:
  Directory: /.../inst/apps/tst1_a1/admin/install
  adgendbc.sh INSTE8_SETUP 1

  
  Fate of automatic configuration with State 1

  RC-50014: Fatal: failed to run the auto configuration service
  Asked by oracle.apps.ad.clone.ApplyApplTop
  ERROR: AutoConfig completed with errors. Check the file A.../admin/log/applyappstier_05200952.log for more details.
  ApplyApplTop completed successfully.

  # Check the race situation AutoConfig of ApplyApplTop
  WARNING: The autoconfiguration service has completed with errors.
  Please visit the auto configuration section in the log file. If necessary, you can rerun AutoConfig command line after you fix the problem

  Thank you

  Maddy

  There is a problem with the host of the database for creating applications listner received the error...

  Thank you

  Malek

• The PRS - T1 firmware update does not complete

  EReader PRS - T1. Now that Sony's Reader store is closed, a new firware update redirects the reader to the Kobo store. Trying to do this update on the drive to fail with the "complete failure" message, tried again, not go. Tried on two different Windows 7 laptop computers and two different readers of PRS - T1. Both the same result. Where from here?

  I solved this problem, it's the latest firmware for the Sony Store closing.

  Sony did a bad job of coding, it does not check the space available on the drive. As the update needs to copy the updated firmware for the drive, the drive must exceed 100 meg free space to enable this. Two of my readers had less space to 100 meg. By removing some books in order to release the update about 110 meg proceeded until the end.

  Sony, get your coders education!

• Compaq Presario SR5130NX: Cannot start Windows Vista after failure - HELP!

  Hello! My building has undergone a complete failure so 4 days ago I used it. Power resumed 3 hours later, but I was not able to log on since.
  
  
  
  
  
  Normally, I turn on my PC, and about 30 seconds later, a window pops up asking you my password. After entering it, the PC come by my office. Now, when I turn on the PC, it brings me to a blue screen with a mouse cursor in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  When I press F8 during the boot process and choose an option from the window "Advanced Boot Options", I still can't start my computer normally.
  
  
  
  
  
  Here's the "Advanced Boot Options" I tried, after consultation with my brother a little more PC-savvy:
  
  
  
  
  
  1 repair your computer - after I see my black screen that is usual with the words "Microsoft Corporation" under the green bars that scroll from left to right for about 15 seconds, a blue screen appears with the mouse pointer in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  2 mode safe - while the PC display several files on start up and down, it stops on "Loaded: \windows\system32\drivers\disk.sys" for about 20 seconds, then proceeds to a black screen with the words "Safe Mode" in the 4 corners and the mouse cursor at the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  3 safe mode with network - see "Safe Mode" above.
  
  
  
  
  
  4 safe mode with command prompt - see 'Safe Mode' above.
  
  
  
  
  
  5 last known good Configuration (Advanced) - see "repair your computer" above.
  
  
  
  
  
  6 start Windows normally - see "Repair your computer" above.
  
  
  
  
  
  7 debug mode - see "Repair your computer" above.
  
  
  
  
  
  I downloaded a DVD recovery based on Linux in knopper.net, allowing me to access important files, which I copied from the desktop to an external hard drive (4.1 GB iso file).
  
  
  
  
  
  PC Windows XP of my brother has a recovery disk, but my Windows Vista PC did not come with one. I've seen a few paid versions, but looked resources due to cool weather and free shipping.
  
  
  
  
  
  I can't tell if I have the 23-bit or the 64 bit version of Windows Vista, so I downloaded both versions of an open source sourceforge.NET startup repair, which I burned on 2 DVDs. After you run the startup repair program using two DVD, the diagnostic results have been uploaded online at ubuntu.com for review and technical analysis. Here are the links:
  
  
  
  
  
  http://Paste.Ubuntu.com/16018001/
  
  http://Paste.Ubuntu.com/16019372/
  
  http://Paste.Ubuntu.com/16040380/
  
  
  
  
  
  The last report ended with the words "start managed to fix...".  You can now restart your computer. "But I always encounter a blank screen (black or blue) when I try to log on to my PC.
  
  
  
  
  
  Here are my details of PC, if it is useful:
  
  
  
  
  
  Desktop Compaq Presario SR5130NX
  
  Serial number: [personal information]
  
  Product number: GC667AA
  
  Warranty end date: October 5, 2013 (according to Compaq/HP.com)
  
  
  
  http://support.HP.com/us-en/product/Compaq-Presario-SR5100-desktop-PC-series/3436764
  
  
  
  
  
  Thanks for any help you can provide.

  Hello

  Since you already have KNOPPIX I try Gparted and use it to 'clean up' the score because it will stop in an impure State.

  NTFS

  [1]

  [11]

  NTFS-3 g / important

  GParted will try.

  Also, I would consider the old problem with fat systems, floppy disks etc. which sometimes a copy of sys files from a floppy disk to a hard drive has reactivated a bootable system.

  So, if system files have been damaged, then replace them since a Setup disk.  Because he goes to options, what kind of work.

  https://en.Wikipedia.org/wiki/Windows_Vista_startup_process

  • Windows Boot Manager (Bootmgr.exe)

  • Windows operating system loader (Winload.exe)

  • Recovery of Windows loader (Winresume.exe)

• Completely duplicating old drive to the new drive

  I have a disk of 300 GB that only 30 GB is used. It contains Windows XP Pro with 2 users.  Diagnostic tells me that a complete failure is emanate. Manufacturing sent me a new drive with Windows XP Pro and drivers and that's all. After spending an hour less time trying to replicate my old system I couldn't to recognize programs that I have installed even though I had the start > programs to show them. Of course, the problem is the registry since I updated the portions of data for all users. Because my wife uses this computer for work, half a day, I finally put the old drive in the location empty and attached the cable main and power for him and he ran very well, very well. (I had also updated the BIOS to recognize an E: drive if necessary.  How can I duplicate my main drive to E; basically drive and then I'll do primary? I searched high and low and founld some really crazy. I tried to backup my drive c: to DVD too, but something has gone very wrong.  Can anyone help? A copy c: to e: would be fine, but notta.

  Manufacturing sent me a new drive with Windows XP Pro and drivers and that's all.

  It's actually quite surprising that you got a spare with XP installed on it.

  What you are looking for is disk cloning software.  If you have a Western Digital hard drive, you can get it from WD (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

• Error PXE - E61: Media test failure, check cable of

  Original title: Hello: I got after the complete failure with your help, now I'm stuck here! Thank you!
  
  It is said

  Intel UNDI, PXE - 2.0 (build 081)

  Copyright (C) 1997-2000 Intel Corporation

  PXE - E23: BIS initialization failed

  PXE - E61: Media test failure, check cable of

  PXE - M0F: Exixting Intel PXE ROM

   

  Invalid Boot diskette

  Insert the STARTUP disk into drive A:

   

  I found that D: is my cd

   

  I had a few studies on the BACK, but it was 25 years ago!

  I can't get beyond this point.

  As I said at the beginning, I have it works on the internet.

  It's for my grandson to play his learning games, she is 5.

  Thank you

  Messages PXE always makes me check the boot order in the Bios to you make sure it is correct.  For Windows to load needs to access the hard drive on your machine, this is not the case.  The hard drive must be set before any PXE (Network Boot).  The message of the startup disk not valid because you inserted diskette that does not have a boot disk, then remove the disk from the drive.  Focus on the Boot order in the Bios.

  To enter the Bios (see your computer screen to the power, your manual or the manufacturer's web site) you probably rely on something like the delete key, or one of the F keys at startup time, but the actual key varies from a model.  Many computers call it "Enter Setup", the installation program is just another term for Bios.

  Set your Bios on the default security settings can also solve that for you.

• Inspiron s 660: hard disk failure. Need advice please.

  Long story short my sister gave me a s Inspiron 660 she received as a gift a few years back (legitimate).  She said that was no longer working and I could.  I suspected a faulty hard drive and after several diagnostic tests later confirmed the WD Blue crashed the original; complete failure. Now, here's where I need advice:

  1. when it has received, it came not with a physical disk from the Windows 8.0 operating system.  It was pre-installed and then upgraded through its work of departmental to 8.1 it.

  2. I can't access the code of Windows because it is in the BIOS.

  3. I have a hard drive to work with Windows 7 installed and tried hooking laptop to see if he should realize that he was a long shot at best.  As you have probably concluded he was not recognized.

  4. I thought wiping one of my hard drives and do a clean install of Windows 10.

  Question: With a new hard drive (or possibly an SSD) would work #4 or I still have problems with the BIOS and Windows embedded product code?

  Question: What do you suggest I should try?  It's a nice little system and everything is clean and stable.  I have someone who needs a system, but can't afford it, and I thought I'd give something that would meet its needs.

  Thank you.

  ROUTE29

  Re: 4. I thought wiping one of my hard drives and do a clean install of Windows 10.

  Yes, it should work, but to do this, you must either buy an OEM copy of W-10, which has its own product key.

  http://www.BestBuy.com/site/Microsoft-Windows-10-home-64-bit-Windows/4423102.p?skuId=4423102

  https://softwarekeep.com/Microsoft-Windows-10-Home-Edition-32-bit.html?gclid=CNXh5ev3wc8CFQGSaQod5A4LMQ

  The upgraded version free of W-10, Windows 8, 8.1, 7 ended July 26.

  Bev.

• Drive failure PowerEdge - no option in offline mode

  I have a disk failure and a drive failure on one of our PowerEdge servers.  I have an option for all offline player with the exception of the complete failure of the drive one... I have the possibility of the failure of the planned route.   Looking at the screenshot below, it seems complete rupture disc (2) has already been removed from the DESCENT and my hot spare has been disadvantaged.

  What is the best way to proceed here?

  

  It is already offline, it is not necessary to force offline before removal. You must force offline your pred fail (1:8) drives before removal/replacement.

• Help! After you open a .psd in illustrator, he breaks down and is no longer able to open .psds.

  I have a photoshop document that is a few coats of the same image that contain different amounts of "threshold" applied, which what color do differently "Posterize" style image multilayer.

  I've done this before and it worked fine, no problem.  Today, after that, everything was fine, I used the trace of image [that I have in previous iterations of this technique] on the top layer and it was good, worked perfectly, then the 2nd layer, which returns an error message something like "this operation cannot be completed, reason: cannot. When "ok" is clicked, all the Illustrator crashes. If I try and open the exact same psd which was normally open in illustrator, it returns the error "file is not readable. I could make the psd a CMYK document and then opened he tried again, the process more and it came with the same mistakes every time.

  I recorded the 2nd attempt if that might help to understand what happens [please excuse my * drawings haha] why - YouTube

  I think it's called layer "dark", which causes the error. I'll try to figure out why - currently, I think it might be the border being too detailed [but I have a record of the whole image, where the border has been drawn very well...] But this does not mean that I can use this border to the image if I can find a way to open the psd again.

  Help, please

  I have "fixed" the question of the Illustrator completely reinstall.

  No idea on how to really solve this problem, or even if someone else has it.

• Video playback very slow failure with iGPU and dGPU activated simultaneously

  Until a few months ago, my PC has been run with an i5 760 and my current Radeon HD 7850 on items 11-first reading was smooth and I could edit my videos fine.

  However, recently I installed a new processor and motherboard - a 4770K i7. The key thing here is that it has integrated GPU (so called "iGPU") that can operate in tandem with my current dGPU (discrete GPU, the HD 7850) by the presence of jobs such as the rendering of encoding videos and sent to the iGPU in a function called Quick Sync transcode. In order to use this, I had to link a virtual/VGA monitor to my motherboard port (because according to this post by vaesauce on the forums of the OBS), and for all applications that worked perfectly (Handbrake transcode very quickly, and I can listen to with OBS with negligible performance). Except one - first elements 11.

  When I started first elements 11 to edit a short clip yesterday, I was greeted with a screen that informed me that I had incompatible drivers. I went and checked my video drivers for both of my GPU - to both day - the reinstalled and restarted. Tried once more, the same question. Past to try and change just resulted in a complete failure of video playback and audio playback. I found the solution was to disable my iGPU in Device Manager, then it works fine.

  Now, here's my question - how can I have the dGPU and the iGPU active and able to edit videos with Premiere elements 11? It all works in this way, the constant entry in the Device Manager before and after the installation of a video is very annoying (also, I'm sure PrEl 11 would benefit itself from the QuickSync!)

  > found the solution was to disable my iGPU in Device Manager, then it works fine

  As far as I know, it's the only solution, because Premiere Elements is not really designed for double graphics cards

• Can anchor a main window in Illustrator CC

  Dear Forum,

  I just switched to Mac and I don't know if it's the new system or the CC of my illustrator version - but I can't anchor the main window, which means that it is always a little floating around independent of the panels - which is very annoying. If I have several documents open they are grouped and docked together as on the screenshot, but the window main itself will not anchor on the top panel Illustrator - in fact the three color buttons are control only working documents - not the full application of the Illustrator. If I wanted to minimize the Illustrator completely, this does not work, just the documents be kept to a minimum and the Illustrator panels remain (?). I tried all the functions of windows, but basically nothing to anchor my documents with the Panel in Illustrator.  The strange thing is that CC Phosothop does ' t have this problem - (as in the screenshot) it snaps perfectly when you pull the line upwards, and when I reduce PS the program minimizes as would any other application. Tool panels Illustrator can be anchored to the other without a problem, but not the document window.

  Can someone advise?

  Thank you

  

  Have you tried turning on the framework of the Application of the window > Application frame?

• The Catalog backup of opening after the failure of the computer

  Hi people

  I'm obviously a dunce...

  I back up my images and catalogue on a second internal drive and two external drives...

  Recently, I suffered a complete failure of PC which has resulted in the 22nd of startup that need to be replaced and reinstalled all the software...

  "I use LR 2.6 and thought I could open LR and go to"

  FILE / open catalog... / and then select the second internal drive that has all the files intact and open the catalogue...

  But when I select the required catalog, I get the message;

  "Restart Lightroom with this catalog? ."

  To use this catalog, Lightroom must close the current catalog and restart. You want to relaunch Lightroom with 0950\Lightroom Catalog.Ircat 2 E:\Users\Justinted\Pictures\CatBackup\2010-01-08? "

  I then click "Restart" but just LR closed its doors and does nothing?

  What I do bad people?

  See you soon

  Just

  Because you have moved the images to a new disk, Lightroom knows not where they are.  Right-click on the folder in the Lightroom library and choose Synchronize.  Then you can show Lightroom where you moved the images.

• Flashpromanager.new & Photoshop CS6 (cc) installs fail

  Help?

  Working through the Adobe Application Manager, apps download completely, start to install and then encounters a fatal error. The Application Manager tells me "error (34).

  The page-> FATAL error summary tells me: '{xxxx-not-sure-what-this-random-string-is-but-obfusicating-it-just-in-case-xxxx} camera profiles Installer_7.1_AdobeCameraRawProfile7.0All 6.2.5.0' payload information not found in Media_db.

  Fireworks, Dreamweaver, Muse, Edge, etc. Install well... have not tried Illustrator or others.

  [update] trying to install Illustrator. Failure in the same way that installs it Flash and Photoshop.

  I had the public beta of Photoshop CS6 & Sue Flashpromanager.new 5.5 (expired) installed, but both have been uninstalled (using programs uninstall adobe) before my attempt at a full installation of CS6.

  Any thoughts?  Already tried to launch the CS cleaner utility.

  Installation environment:

  10.7.4 OSX

  end of 2010 MBP, mem 4GB, 60GB of storage available.

  Brian Kiel which version of Adobe Application Manager are you using?  You can locate the application in Applications/Utilities/Adobe Application Manager/core.  You can find the version by selecting Adobe Application Manager, read the information in the file Menu.

  Also, you can download and install the released tests and choose the option to license this software once installed.  You want then enter the Adobe ID linked to your creative cloud subscription.

• WiFi intermittent

  For the past two weeks, our Time Capsule wireless connection (2015) (Version 7.7.7) was extremely intermittent. He goes out for a short period and then turns back on. Our ISP told us to recycle and get a new modem cable. We did it and the same thing still happens at least 4 or 5 times a day. Failures range from 2 to 3 minutes to 20 minutes. During outages of the time Capsule has a light amber, and then the light flashes green and then go back to the fixed Orange until it returns the signal and light turns solid green. When activated, the signal is always strong. Does anyone have an idea what is the cause?

  MacBook Pro

  MacBook air

  iMac

  everything works Sierra

  Unfortunately, a constant amber status light seems to indicate a potential failure of the time Capsule. It seems, from your description, that the complete failure has not occurred but has been intermittent.

  If you bought the time Capsule in the year, you can return it for a replacement; otherwise, if you have si vous avez achete bought with another Apple product calling and have AppleCare with this product, you would potentially have three years warranty.