iMac 27 inch 2011mid video card failed

Similar Questions

• PC does not recognize video card

  I had bought an EVGA Geforce GT610 graphics card and installed in my HP Pavilion 500 - 54 (Windows OS 8.1). When I tried to install the video drivers (latest drivers from EVGA) for the new video card I received a message as the "graphics driver cannot find compatible devices. Also the new map did not appear anywhere in the graphics card or anywhere in the Device Manager. I've disabled the secure boot mode and disabled slot security legacy for the pci slot where the video card. Yet I still can't the PC to recognize the video card (which is compatible with this system). I tried to uninstall the pilots on board, but that did not help. The PC should recognize the video card, when he was put in the x 16 pci slot. Someone has or has had this problem and have you found a solution to the problem. And Yes, I have tried the card in another PC and it works fine. I have exhausted all avenues of solution up to now and still can not solve this problem. Any advice or fixes will be greatly appreciated.

  Only, I solved the problem. It turns out that the instructions on adding a video card failed a defintely detail to include.  As well as strives mode, you need to go into the boot settings and select legacy boot.  I thought that ithat legacy mode automatically would have done, but I shouldn't assume. All is well now. It detected the video card and drivers have been installed. Thanks for the suggestions. I hope this helps someone else with the same problem.

• Need new video card for an HP dc7900

  The original video card failed on my dc7900 (purchased in 2009) - a Nvidia Quadro NVS 290 PCie x 16. A repairman replaced with an ATI Radeon x 300 / x 550 but performance index increased from 3.2 to 2.0 and the driver is apparently causing BSOD when I use Google Earth or let the screensaver start. If I turn off the screen saver, the PC will crash when I work. ATI/AMD says it does not support the card under Windows 7 and their drivers for Vista. I have Windows 7 Ultimate with two monitors.

  I would get an updated map, but the designation of cards is a little confused and I don't know if the cards would work in the PC. It has PCI 1 and 2. The Quadro 290 has 256 MB. Can I switch to a 300, say, 512 MB, or even something more? The HP site for the dc7900 page recommend the Nvidia card but it does not sell and is not a recommendation of an alternate member. NVIDIA has not responded to an email asking a model of upgrade. Any suggestions? No problem, I have to be concerned as enough food?

  Hi Paul,.

  Thank you for the information. I ordered the card and hope it lasts. Good to know that speed chart will be better than the original map. I used to build my own PC from 386, 486 (using SCSI and OS/2 disks) and through first processors Pentium but the motherboard changes left most of my obsolete spare parts. It is safer not to do on the bleeding edge.

  On another forum, someone gave me advice on the use of Bluescreenview to know what causes accidents. It turns out that the ATI driver is the cause, and probably because the card is not supported under Windows 7 by the site Web of ATI. Once again, thanks for the help - these forums are great!

  Doug

• Requirements for video card cablecard media center units

  I use desktop Gateway as a DVR. It works very well with antenna and entered Silicon dust. I want to run my cable through this PC. I use Windows 8. Advisor cable card tells me the processor and memory are OK but the video card fails. I tried a nVidia GEFORCE GT 640. This fails also and Yes, I have the latest drivers.  Can someone tell me what video card works? The system is a GM5664 with an improved power. Thank you!

  I don't know if the tools described in
  http://www.missingremote.com/Guide/override-digital-cable-Advisor-Windows-Media-Center-7
  works on W8 - but please try and report results.
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• My iMac graphics card fail?

  OK last week my iMac 27-inch quad core end 2009 graph card fail is all and with artifacts square pixelated took itnto the Apple Store close to my house in Spain and they said only an iMac which is aged over 5 years with graphics problem they can't touch to fix so looking on the net I found this map that looks a lot like my ati Radeon card 4850 only it has 512 MB of ram instead of what the 5750, who has a gig of video ram. I can put this card into my iMac late 2009

  http://www.eBay.es/ITM/genuine-Apple-iMac-27-A1312-ATI-Radeon-video-card-HD5750-MC511LL-A-109-B97157-0-/272070941812?has...

  I am piecemeal on eBay due to many bad experiences of people, but because I live in Spain and the graphic is in the USA, I won't be on a back row fourth fight with the seller, I would like to know if it is possible to put this map on an iMac 2009 end will he made and since apple is not so good to advise me on this matter and rude if I buy it for apple's not ready to put in my machine

  I started having the same problem. You can connect in safe mode - hold SHIFT key upon restart.

  It is not a hardware problem, others is having the same problem. The problem of lookslikeN with the drivers of the OSC.

• How much would it cost to replace the video card on an imac 27 "late 2009

  I have an imac late 2009 27 "with an ATI Radeon HD 4850 512 MB video card. He made rare as small squares on the screen and stuff of course freeze everything. Sometimes when it starts, vertical lines if poster and nothing else can do. I have to restart the computer several times. I know that is the video card, how much would it cost to replace it in the apple store?

  The computer is too old for Apple to watch. you will need to find a place to third party to look at.

  Vintage and obsolete products - https://support.apple.com/HT201624

  "Vintage and obsolete products.

  Owners of iPad, iPhone, iPod or Mac can get services and Apple parts or service providers for 5 years after the product is no longer manufactured (or longer when it is required by law). Apple has stopped support for certain technologically obsolete products and vintage.

• I have an iMac 27 inch mid-2010 and a game I play is to say that I did not have a sufficient graphics card.

  I have an iMac 27 inch mid-2010 and a game I play is to say that I did not have a sufficient graphics card. Is there a way to improve or update my graphics card? I currently have an ATI Radeon HD 5670 512 MB. Any help would be appreciated! I'm also running on OS X El Capitan.

  You can't pass the GPU. Make sure you check the game system requirements to make sure that they will work on your model.

• HP Pavilion P7-1459 fails to start after installing a new video card

  I bought a GeForce GT 640 video card to put in my new HP Pavilion P7-1459, after checking the specs. The card requires a PCI-Express x 16 for Version 3.0 slot. Check, the HP Pavilion P7-1459 has one of those and all the other cards speca are well below systems.

  After uninstalling the ATI driver and withdrawal of the card Radeon 7450, I put the 640 TG in the PCI-Express slot and turn on the machine.  Fails it hard machine and the system does not start.

  I have already tested the card in another machine and it work very well, is not the card.

  Any ideas?

  Please check the minimum recommended configuration for the 640 GT power. Your computer has a 300 Watt power supply, and it seems that most cards of TG 640 recommend a 350 Watt power supply.

• My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any mention of this code error or failure anywhere

  My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any reference to this error code or failure anywhere, either in the "help", on Microsoft Support sites, or on the community boards.

  I have updated all drivers for this graphics card (AMD Radeon HD series 7900) and all the surrounding drivers with the AMD software.

  I can't find any information, so I don't know if I should get a new video card (which seems to work very well) or if I should just ignore it.

  Someone at - it ideas?

  Raven

  Computer Alienware Aurora R4
  Windows 7 x 64 OS
  AMD Radeon HD series 7900 graphics card

  Original title: Error Code WVC07-LB8

  Hello

  As you mentioned that you have already updated the AMD graphics card drivers, could you let us know if you see any exclaimation or any error in the device under graphics card Manager?

  Are you facing any problem with your graphics card, video, or your screen resolution?

  As Alien Autopsy Global System Tests showed you the error, I suggest you to get tap dell JDM for more support asiistance if you have any problem with Yon graphics/video card or screen resolution.

  For your information: once you uninstall your graphics card drivers, windows has its own built-in drivers that will automatically charge the generic drivers. If in case it does not load you can search the hardware changes, this will probably load the generic drivers.

• What should I do to update my video card on an iMac?

  the "use graphics processor ' is enabled in my preferences, so the question must be the video card. Anyone know what to do about it?

  Upgrading a video card in an iMac is not a simple feat. Contact your Apple store for more details on your specific machine. This forum is for Adobe Mix, a mobile application that is free to download.

• Failing video card? Or a logic board problem?

  Re: video card failure?

  It is a follow-up to a previous debate.  Less than 2 years ago, I had a default videocard from apple (OEM) with lines of scratches on the screen.  I replaced it with a

  ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro Apple sold by: JAG technology it worked fine until I have let my old Mac 2008 for 9 months. When I turned it on to use for art, the startup has been slow and the screen became often black or never turned on at all. And the map seemed to be running really hot.    I pulled the card according to the suggestions and started and checked start with Hello time and on screen sharing my network and it seemed to have a time of normal start for this computer. But when doing screen sharing the screen remains black. So, I can see the contents of the hard drive, etc., but there is no display.

  I ran TechTool Pro and all components on the Mac pass inspection including the video ram.    I wonder if the problem is a graphics processor integrated on the system board itself or just the graphics card.    If the chip card display does not work, shouldn't be able to see a display from a distance even in the absence of a graphics card? Or not?   I don't want to pay $150 to replace a card if it is bad.

  Thank you for your help.

  The f

  There is no piece of the display on the map. For video, you need a working video card.

  Try reinstalling on both ends of the cables of two power between the card and power on the logic board UAX connectors.

  Check that the fan turns freely

• My iMac 27-inch 2011 intermittently turns

  I have an iMac 2011 mid with a processor clocked at 3.4 Ghz and 16 GB of ram. I had the PSU replaced about two years because of a similar problem.

  I recently moved house and when I set up my mac on arrival it would not turn. I tried the various troubleshooting steps Apple provides with no chance, at this point, I guess I would need a new power supply again and was waiting for a good time to go to an apple store.

  I thought that I would try to put the machine on every morning at the same time, just in case something has changed and the fifth day, I was pleasantly surprised that it is on. Jump forward two weeks use of normal night and I go on vacation for five days, when I return to that the mac would turn yet not.  Yet once about 5-7 days later I was surprised to see that he was suddenly works again.  Even after spending about two weeks and once more I am away from my home for 4 days, my back on that the mac will not turn again!

  The intermittent nature of the problem confuses me, and I was wondering if one has similar problems or can shed some light on why this can happen before as I lug my Apple store near.

  Thank you.

  iMac (27-inch): AMD Radeon 6970 M video card replacement - Apple Support program

• iMac 27 "mid-2011 hard drive failed, fan to full after the removal of HARD drive

  iMac (27 inch, mid 2011)

  2.7 Ghz i5

  12 GB of RAM

  I have a fault where the HARD drive fan runs at max speed (RPM 5431, 51 * C temp).

  The first symptom was a rattling noise from the factory 1 TB HARD drive, which has disappeared from the system, to be replaced by a disk of 4 GB in size. Then the fan started running at max speed.

  A few months ago, I installed a 2nd drive HARD, an SSD and use this to all the data, so the 1 TB drive HARD original was basically unused and empty. To try and stop the fan and also run the disk diagnostics failed I've removed it from the iMac. However the HARD drive fan is always full.

  I ran the Apple Hardware Test and received the error message: 4SNS/1/40000000: TH00 - 9,000

  Given the primary SATA HDD is now removed, I also set the temperature probe? Are there other fixes to this problem of fan? I didn't intend on replacing the HARD disk immediately that this is not necessary at this stage.

  Thank you!

  Shaun

  shaun02 wrote:

  I ran the Apple Hardware Test and received the error message: 4SNS/1/40000000: TH00 - 9,000

  Given the primary SATA HDD is now removed, I also set the temperature probe? Are there other fixes to this problem of fan? I didn't intend on replacing the HARD disk immediately that this is not necessary at this stage.

  Yes, take a look on > acs http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im

• Add memory to the iMac 27 inch

  I just installed more memory, 2 cards. But it does not seem to register to 'about this Mac'.  Is this a problem? the system seems faster. All advice appreciated.

  Reset the NVRAM...

  • How to reset the NVRAM on your Mac - Apple Support

  You could see the report on the system by the use of a utility rather

  the about this Mac. In Mavericks OS X 10.9.5, which would

  Information system (from button about this Mac) choose

  System report in the following view.

  If you choose to GO in the Finder menu bar and let it open utility

  then choose the (utility) information system that offers all the info on

  the hardware and software of the computer.

  According to the info in your message (iMac 27-inch mid 2010)

  Memory maximum 32 GB (Core i5) or Core i7 Actual 16 GB (Apple)

  Memory locations- 4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM

  The max is 32 GB of RAM equivalent quality... by http://mactracker.ca

  Sometimes the quality of third party memory isn't at the height.

  Or part of 'close the number' is maybe not correct for the computer.

  So who can also be a source of problems. Generally recommended

  dealer sources include OWC macsales.com or Crucial.com.

  In any case... good luck!

• iMac 27-inch, 1 TB or 2 TB?

  Hello world!

  I'm a 25 year old medical student who is looking to buy an iMac. My fiance and I commented on 27-inch screen and are not sure if we should get the Fusion 1 drive or 2 TB. Any suggestions?

  We are not the players, photographers, photo editors or video or anything of that kind. I think the 1 TB would be a lot of space, but my fiance thinks that if we get the 1 TB (with 24 GB SSD) we would barely get a lot of use SSD because most of which will be taken up with the software. The gentleman at best buy told us that what we use for, the 1 TB would be well because even if the 24 GB SSD has been exhausted, us would notice no difference between SSD and the normal HARD drive.

  Any advice/suggestions would be greatly appreciated! Thank you!

  An employee at Best Buy did not know what they are talkiing everything.

  There will be a noticeable performance difference-down if you get an iMac 27-inch display with the merger of 1 TB disk.

  It is because the 24 GB SSD, paired to office standards 1 TB hard drive 7200 RPM, will fill up almost with the operating system and installed applications (and third-party applications, you must install) not leaving enough data free storage for the OS to have certain additional operating margin to handle data on the SSD First, before having to access the slower spinning mechanical hard drive.

  2 to or full SSD disk is a much better Setup for a faster than the standard desktop 2 TB performance, drive hard 7200 RPM is matched with a 128 GB SSD, instead, which gives much more room performance for this iMac to exploit more regularly than the SSD as a support of temporary data / disk space like scratch (as long as you don't fill the SSD with a large amount of third-party applications and real saved these files the ordinary hard drive rather than the SSD).

  Good luck!