iMac does not respond after sleep

Similar Questions

• End of 2012 iMac keyboard does not respond after sleep

  I have an iMac late 2012 and my keyboard does not respond after that lay down the computer.  When I type the password box is very slowly filled with random letters that are not my password and hit enter just adds another letter.  In my view, that it is a common problem that I am many have known for a few months.  Is there a solution to this I have reset PRAM and SMC, and no work.  It's very irritating and I hoped with every update from El Capitan, this would have been fixed, but not joy.

  I don't know about "modern" Mac and OS X versions, but on my old Powerbook / Tiger awakened from his sleep, it was necessary to 'click' somewhere (I clicked on always in the password field) before the same keyboard would meet all

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.

• Some applications does not respond after sleep (El Capitan)

  Product: 13 '' Macbook Pro retina (12.1) (base model sheet)

  El Capitan Version: 10.11.6

  The problem:

  When I connect after that my Macbook went down, I often have problems with some of the stock apps. In particular, I had this problem with the Mail Messages, reminders and calendar. This seems to be a problem when they are open before putting the macbook to sleep. This same problem happened with non-apple-stock applications.

  Once logged in, if I click on the application icon, the application window will come into focus. After that, I'm unable to use the application (as if frozen) and I often just see the spinning Rainbow mouse icon.

  Can I force quit the app and then open it again, but now the application does not load.

  To solve the problem, I can restart the macbook and all is well.

  Some others probably associated with funny things I saw (only attracted to this once... but did not look at one time or another):

  I open the calendar application after the macbook was sleeping and my full general calendar was empty (which would be nice if it were true!). In any case, I checked the 'accounts' and also found that there was no accounts! (I have 3 goes). So I wonder if there is a problem with the accounts after sleep since these apps I've had problems with all iCloud account and mail also uses some other accounts.

  Big Question: Is there something I can do to make that happen?

  Thank you very much for your help! Sorry if this is a double post, it is difficult to find an answer via google search.

  Start Safe Mode removes the system caches that can help...

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to Message, Mail, etc.

  If you still have problems, check the startup disk.

  Launch the disk utility located in/Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• 6 Lightroom does not respond after sycing mobile application

  6 Lightroom does not respond after I tried to sync with mobile App. anyone having this problem?

  Trudy

  Hi uncagedwoman,

  • Please go the library Module, then go in the preferences.
  • Go to the performance tab and uncheck the option "use graphics processor.
  • Restart lightroom. and check

  Please let us know if it helps.

  Kind regards

  Tanuj

• Satellite T110-121 - Wireless does not work after sleep in Win7 Home Prem 64

  Hello

  I bought Toshiba Satellite T110-121, with Windows 7 Home Premium.

  Problem:

  1. after going into Sleep Mode, when he wakes up, my WIFI does not work, unless I'm in wireless network card setting, Advanced tab, then I change the Tx to say 100% to 75% power level, then the WLAN will work.

  2. I tried to adjust the setting for power management on the network card for maximum performance and does not disable during sleep and also in the Bios but nothing is

  3. I use Realtek 8191SE drivers have been updated (wireless card, Ethernet, Bios)

  Thank you

  As much I know Tx power level option must be set to Auto.
  Have you noticed the same behavior with Auto option?

• G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive

  My laptop received disc hard failure two months and he died since then. I intend to change the hard drive of the laptop as soon as the order arrives in a few days. But now the problem is that as if now the keyboard of my laptop does not respond. So I would like to know if this problem will be resolved after the replacement of hard disk or is related to the software / operating system of your laptop?

  Help, please...

  Sorry I couldn't answer yesterday.

  The update, is that when I tried to turn on the laptop as well by pressing the ESC. The laptop did not respond initially but then responded in the end, but after that, there is no answer.

  Now Mr. President, I would like to know your end on this issue?

  Thank you

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.

• Thunderbird starts by does not respond after the update to version 38

  I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?

  > I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.

  This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General

• Windows Mail does not respond after receiving a script error message.

  Whenever I press a button made a noise of ping?  can not shut down windows.  Just does not respond?

  "Em" wrote in the new message: * e-mail address is removed from the privacy... *

  Whenever I press a button made a noise of ping? can not shut down windows. Just does not respond?

  Right click on the taskbar background > select Start Task Manager, on the Applications tab, select Windows Mail > then end task.

  Best regards Steve. MS - MVP. MAIL. [DTS] UK. http://www.getsafeonline.org/

• Elements Organizer 9 does not respond after failure

  Hello

  I hope someone can help me as soon as possible about this. I just change the pictures in the item editor, open the photos in the Organizer. The power's out, computer off. When the power came back, editor works very well. But organizing but as soon as I click on a photo, she weaves, Greys ot, unresponsive. I click to let him recover, but it does not work.

  What happened when the computer shuts down as it causes this? I am new to PC, so need a lot of details.

  Thank you very much for any help!

  PS: Windows 7, Dell Studio computer.

  If this does not work after you remove the file preferences too, I would try this http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Ref215030515

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• Safari not responding after sleep

  Whenever I open my MacBook Pro after sleep, Safari unresponsive. It won't let me not normal quit, or even force them to leave. It just sits there with the colorful, beach ball until I have turn off, by pressing the power button. I tried clearing history and hide, but to no avail.

  I am running OS X El Capitan worm. 10.11.4

  MacBook Pro (retina, 15 inches, mi 2014)

  2.5 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  Intel Pro Iris 1536 MB

  Thanks in advance for any input.

  1 click  in the menu bar and select "force quit."

  Select Safari and click "exit of strength at the bottom of the window to Force Quit.

  Hold down the SHIFT key and launch Safari.

  2 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Select Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• Qosmio G30-195 - infrared receiver does not work after sleep

  Hi all!

  I have a problem on my laptop after Exchange of service of the motherboard.
  Once I booted Windows (Microsoft eHome transceiver) IR receiver works well in all programs, but when the system resumes from sleep mode, the IR receiver unloads from memory and can not find the search for material.

  If the remote control does not work until I have to restart Windows. Windows XP SP2 and Windows XP MCE behave the same. Before the exchange of motherboard I didn't you have a problem.

  What can I do with this?

  > What can I do with this?
  Contact service again and tell them the same thing. They need to know why this happen.

  By the way: you can use other USB devices connected after waking from sleep mode?