iMac freezes after accessing network preferences
Used my iMac this morning with no problems. However later in the afternoon, I noticed that the computer recognizes only one wifi network but refused to recognize the 2 other wifi networks I. I open network preferences to check, but the computer froze and the movement of the mouse worked. Finally, I was able to force out the pane of network preferences. But the only function my trackpad is yet to move the cursor on the screen and even what the secondary of the wireless mouse offers limited capabilities. I don't have internet connection but only from the main WiFi, the secondary network still refuse to be attached, even if I use the password. How can I get my computer and mouse to all features? Help!
"I opened the network preferences to check, but the computer froze.
Start Safe Mode removes the system caches that can help.
Upper left corner of your screen, click on the Apple > Shut Down.
After your Mac stops, wait 10 seconds, then press the power button.
As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
Release the SHIFT key when you see the gray Apple logo and progress indicator.
Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot
On Safe Mode
Tags: Mac
Similar Questions
-
iMac freezes after upgrade to Mac OS Sierra
I have a 27 iMac late 2009 ". After the transition to macOS Sierra, I got freeze about once or twice a day. The only way to get the system operational is again via a cold start. In this case, the pointer of the mouse still works, but otherwise, the system is not responding. I have never had this problem in 7 years using the same material, so a bit of a loss.
How much RAM you have installed? You can check in the menu > about this Mac. Slopes of the Sierra, but barely, with 4 GB, but it really needs min. 8 GB runs correctly.
You can also try Safe Boot mode.
-------
Restart in Safe Boot mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.
-
Could not connect EM Console after accessibility check preference
Hello
I stopped and began to EM.ear of the deployments of the console. Then I tried to open the EM console and was able to see the login page and after you enter the credentials, it says successful Login and immediately the page is loaded with the page 'Preferences for accessibility' with two options and we're "not to see the again and screen reader activate two.» After clicking on continue without any options selected.
It shows the error
Error 500 - Internal server error
RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
10.5.1 500 internal Server Error
The server encountered an unexpected condition which prevented him from meeting the demand.
That's all I didn't see anything in the Console of Em. I tried several reboots of the EM.ear of the console, but each time the page is loaded as only.
I was able to see the applications loaded in EM before reboot.
Please help what could be the reason.
PS: SOA to Oracle 11g and WL Server 10.3.3.0 Costume
Thanks in advance.
Thanks for all your replies. In fact, he began magically working after a while. No idea why it came and went.
Enjoy your entries.
-
the iMac freezing after constant put 10.11.5 updated
Constant freezing and not wanting to restart correctly, takes forever and multiple tests.
Try to start by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system does a lot of cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.
-
Can not access network drives after installation of Windows 8 Pro
Hi all
I have a concern with a PC in Windows 8.
I am rebuilding a new laptop for a user. Successfully, I added to the domain and assigned privileges for the user. When I try to log on to the PC with the new user account, I can not access network drives. When I log in with my account, I am able to access the network without problem drives.
When I'm on the user account I can see the other computers on the network as well. But for some reason I can't access network drives. Other computers on the domain are running Windows 7 Professional.Can someone help me with this?
Thank you
Hello
As you are on a domain, I suggest you to post your query in the TechNet forum.
http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads
I hope this helps.
-
iMac freezes El Cap 10.11.4
My end 2009 27 "iMac freezes - mouse still works. I have to make a hard stop & restart. Here's my machine Info:
iMac 10.1
Intel Core 2 Duo
3.06 GHz
1 processor
2 carrots
3 MB of L2 Cache
16 GB memory
1.07 GHz bus speed
Boot Rom ver: IM101.00CC.B00
Version of the SCM (System): 1.53f13
Here are a few lines from the System Console log all messages before the FREEZE/REBOOT: (step 1 by Linc Davis)
27/03/16 9:38:02.171 AM watchdogd [191]: [watchdog_daemon] @(_wd_daemon_service_thread) - service (com.apple.WindowServer) reported as insensitive
27/03/16 9:38:05.031 AM spindump [865]: registered userspace_watchdog_timeout.spin report WindowServer version? (???) in/Library/Logs/DiagnosticReports/WindowServer_2016-03-27-093805_Macintosh-34159e 0f0a2e.userspace_watchdog_timeout.spin
27/03/16 9:38:05.033 AM watchdogd [191]: [watchdog_daemon] @(__wd_service_report_unresponsive_block_invoke) - spindump gathered for (com.apple.WindowServer) to the (/ Library/Logs/DiagnosticReports/WindowServer_2016-03-27-093805_Macintosh-34159 e0f0a2e.userspace_watchdog_timeout.spin)
27/03/16 9:38:27.244 AM watchdogd [191]: [watchdog_daemon] @(_wd_daemon_service_thread) - service (com.apple.WindowServer) reported as insensitive
27/03/16 9:38:29.895 AM spindump [865]: registered userspace_watchdog_timeout.spin report WindowServer version? (???) in/Library/Logs/DiagnosticReports/WindowServer_2016-03-27-093829_Macintosh-34159e 0f0a2e.userspace_watchdog_timeout.spin
27/03/16 9:38:29.897 AM watchdogd [191]: [watchdog_daemon] @(__wd_service_report_unresponsive_block_invoke) - spindump gathered for (com.apple.WindowServer) to the (/ Library/Logs/DiagnosticReports/WindowServer_2016-03-27-093829_Macintosh-34159 e0f0a2e.userspace_watchdog_timeout.spin)
27/03/16 9:38:52.309 AM watchdogd [191]: [watchdog_daemon] @(_wd_daemon_service_thread) - service (com.apple.WindowServer) reported as insensitive
27/03/16 9:39:01.000 AM syslogd [47]: sender ASL statistics
27/03/16 9:39:01.034 AM com.apple.xpc.launchd [1]: (com.apple.FileStatsAgent) Service only ran for 6 seconds. Push the respawn to 4 seconds.
27/03/16 9:39:17.408 AM watchdogd [191]: [watchdog_daemon] @(_wd_daemon_service_thread) - service (com.apple.WindowServer) reported as insensitive
27/03/16 9:39:42.473 AM watchdogd [191]: [watchdog_daemon] @(_wd_daemon_service_thread) - service (com.apple.WindowServer) reported as insensitive
27/03/16 9:40:07.554 AM watchdogd [191]: [watchdog_daemon] @(_wd_daemon_service_thread) - service (com.apple.WindowServer) reported as insensitive
27/03/16 9:40:32.670 AM watchdogd [191]: [watchdog_daemon] @(_wd_daemon_service_thread) - service (com.apple.WindowServer) reported as insensitive
27/03/16 9:41:54.000 AM bootlog [0]: BOOT_TIME 1459096914 0
"step 2" system diagnostic reports titles for the 3 most recent reports before FREEZING:
LAST:-WindowServer_2016-3-27-093829_Macintosh - 34159e0f0a2e.userspace_watchdog_timeout .spin
The previous two titles in the report were same except @ Times: 093752 & 093805
These reports each seem to have thousands of lines of code, so I had not reported. I also bought find any file and delete the two files ESET.
Here is the latest report of BEING done after that last frost:
EtreCheck version: 2.9.10 (261)
Report generated 2016-03-27 11:58:57
Download EtreCheck from https://etrecheck.com
Time 02:56
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Another problem
Description:
iMac freezes requiring a hard restart
iMac (27-inch, late 2009)
[Data sheet] - [User Guide] - [warranty & Service]
iMac - model: iMac10, 1
1 3.06 GHz Intel Core 2 Duo CPU: 2 strands
16 GB expandable RAM - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1067 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1067 MHz
0/DIMM1 BANK
OK 4 GB DDR3 1067 MHz
BANK 1/DIMM1
OK 4 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
ATI Radeon HD 4670 - VRAM: 256 MB
iMac 2560 x 1440
OS X El Capitan 10.11.4 (15E65) - since the start time: about 2 hours
ST31000528AS disk0: (1 TB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
SteveiMac (disk0s2) /: 999,35 go-go (691,05 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
HL-DT-ST DVD - RW GA11N)
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
Card reader Apple
Built-in ISight from Apple Inc..
EPSON EPSON Artisan 730 Series
Mac App Store and identified developers
/ Applications/Parallels Desktop.app
com.parallels.kext.hypervisor [no charge] (11.1.2 32408 - SDK 10.9-2016-01-17) [Support]
com.parallels.kext.NetBridge [no charge] (11.1.2 32408 - SDK 10.9-2016-01-17) [Support]
com.parallels.kext.usbconnect [no charge] (11.1.2 32408 - SDK 10.9-2016-01-17) [Support]
com.parallels.kext.vnic [no charge] (11.1.2 32408 - SDK 10.9-2016-01-17) [Support]
[loaded] 7 tasks Apple
[loading] 157 tasks Apple
[operation] 74 tasks Apple
[loaded] 46 tasks Apple
[loading] 160 tasks Apple
[operation] 82 tasks Apple
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-01-27) [Support]
[loading] com.google.keystone.agent.plist (2016-03-02) [Support]
[loading] com.oracle.java.Java - Updater.plist (2013-02-04) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2016-01-27) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-01-27) [Support]
[loading] com.adobe.fpsaud.plist (2016-03-18) [Support]
[loading] com.google.keystone.daemon.plist (2016-03-02) [Support]
com.GoPro.stereomodestatus.plist [no charge] (2014-01-29) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2013-02-04) [Support]
[operation] com.timesoftware.timemachineeditor.backup - auto.plist (2016-03-01) [Support]
[loading] com.timesoftware.timemachineeditor.helper.plist (2016-03-01) [Support]
com.VMware.launchd.VMware.plist [failure] (2007-11-02) [Support]
[failure] com.adobe.ARM. [...]. plist (11 / 11/2012) [Support]
iTunesHelper UNKNOWN (missing value)
EarthLink TotalAccess UNKNOWN (missing value)
Reader superDrive update 2.1 UNKNOWN (missing value)
TACleanup Application (~ /.) Trash/TotalAccess/Tools/TACleanup.app)
Request for SurplusMeterAgent (/ Applications/SurplusMeter.app/Contents/Resources/SurplusMeterAgent.app)
AdobeResourceSynchronizer hidden UNKNOWN (missing value)
[operation] com.epson.scanner.ica.89952.21A2DFD6-50BE-40E2-BAA3-9C190F62FA90
[ongoing] com.etresoft.EtreCheck.157472
[ongoing] com.Microsoft.AutoUpdate.FBA.127392
[ongoing] com.skoobysoft.surplusmeteragent.12512
[ongoing] org.Tempel.findanyfile.175072
[loading] 419 tasks Apple
[operation] 179 tasks Apple
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]
Default browser: 601 - SDK 10.11 (2016-03-26)
Flip4Mac WMV Plugin: 3.2.0.16 - SDK 10.8 (2014-03-11) [Support]
AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-13) [Support]
FlashPlayer - 10.6: 21.0.0.197 - SDK 10.6 (2016-03-23) [Support]
Silverlight: 5.1.10411.0 - SDK 10.6 (2014-03-16) [Support]
QuickTime Plugin: 7.7.3 (2016-03-26)
Flash Player: 21.0.0.197 - SDK 10.6 (2016-03-23) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-27)
AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-13) [Support]
CANONiMAGEGATEWAYDL: 3.0.0.2 (2009-03-05) [Support]
Center photo Plugin: download the Plugin 1.0.0.4 (2005-04-04) [Support]
SharePointBrowserPlugin: 14.6.1 - SDK 10.6 (2016-03-01) [Support]
JavaAppletPlugin: Java 8 updated 77 03 (2016-03-26) check the version of build
OpenIE (2014-03-16)
Already seen (2006-10-03) [Support]
Flash Player (2016-03-18) [Support]
Flip4Mac WMV (2014-03-11) [Support]
GoPro (2014-08-28) [Support]
Java (2016-03-26) [Support]
MacFUSE (2008-12-19) [Support]
TotalAccess (2005-09-02) [Support]
Skip system files: No.
Mobile backups: OFF
Automatic backup: NON - automatic backup disabled
Volumes to back up:
SteveiMac: Disc size: 999,35 GB disc used: 308,29 GB
Destinations:
[Network] data
Total size: 2.00 TB
Total number of backups: 141
An older backup: 28/02/13, 02:17
Last backup: 26/03/16, 23:41
Size of backup drive: adequate
Size of backup 2.00 TB > (disc 308,29 GB X 3)
9% com.apple.WebKit.Networking
3% WindowServer
tccd (2) 2%
1% cfprefsd (2)
1% fontd
Top of page process of memory: ⓘ
1.14 GB com.apple.WebKit.WebContent (8)
1.01 GB kernel_task
262 MB mds_stores
Finder 164 MB
Safari of 147 MB
11.00 GB of free RAM
5.36 used GB RAM (1.88 GB being cached)
Used Swap 0 B
March 27, 2016, 09:41:54 self-test - spent
Finally, bless him you "heavy supporters" and Happy Easter.
Thanks in advance!
Former skier
How often occur the freezes? They are reproducible or random?
-
Network preferences keep resetting, cannot change or update
This has been fixed, but I couldn't find where someone else had a similar problem, so I thought I would describe the problem and how I got around him.
The problem is after the installation of El Capitan (upgrade from Mavericks), upgrade wiped out my network configuration. It took me a while to realize that he had activated my WiFi and erased my wired ethernet config. When I went into system-> Network Preferences and tried to enter values, I couldn't enter anything, because he would have reset my entries or interrupt me with a dialog box until I can finish. I couldn't change any settings, even the manual settings.
The cause of this problem is that, my Mac Pro for a reason, not connecting not reliable to my gigabit switch Gigabit speed. My other computers do, but not the Mac Pro. The easy solution is to manually configure the adapter to use 100 Mbps and it then connects reliably. (I tried different cables, etc..) El Capitan wouldn't let me configure the adapter for 100 Mbps. He kept just reset the config on auto.
After reboot and around hunting for preference files to remove, I diverted the ethernet connection to my 100 Mbps router, so the adapter would choose 100 Mbps. Once I did that network preferences has allowed me to enter an IP address, subnet mask, router, DNS, etc., while I couldn't before. I went to the hardware configuration and selected manual config/100Mbps on the adapter. He may also have worked just to unplug the cable and configure the adapter when you are not connected. It seems that the system continuously tries to connect to 1000Mbps and reset, which resets the pane preferences constantly, not to let whatever it is automatically registered.
As far as I am concerned, this is a bug. I have not encountered this before El Capitan. However, it is unlikely that Apple will resolve this anytime soon, because it requires you to have some sort of marginal hardware configuration that causes the adapter to think he can connect to 1000Mbps and then immediately fail to do.
This has been resolved.
-
I can't put my password in the pc freezing after 3 letters can help you?
I turn on the pc and it freezes after 3 or 4 letters of the password
I can login to safe mode
Hello
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/products/malwarebytes_free
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
make it work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
The computer hangs when you access network resources
I have this problem with a couple of computers at work. Here's the question:
Computer does not display the network icon in the system tray. When you try to access everything which concerns internet, nothing works. IE Page not found errors, etc. When I go to control panel > network connections, my computer freezes and I have to close the Task Manager Control Panel to continue. My computer will also freeze/hang up when I try to use another application that requires an internet connection.
Not help not to restart normally. The only way I could fix is by turning it off for a while, and turning back on later. But even if it does not work 50% of the time. Restarting over and over again does nothing; the computer still plays the same, no network icon / freezing when you access network resources. Once he decides to however works, the computer has internet/network connectivity and no problems until what it is off again.
I tried all the drivers out there for my network card and reformatted 3 times is not a virus/spyware. The I'm having a problem with the current computer is one day having no application other than Windows Update, Microsoft Office, Java, Flash and Adobe reader installed. They are all Dell computers, some are of the Vostro desktops, while some are older of the Inspiron. Questions computers are running Windows XP SP3.
Any help would be appreciated!
Hello
I suggest you to send your request in the below link that this forum is best suited for your question.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
I hope this helps!
-
Original title: Error Messages
Try to uninstall a program ("Itunes" or "Adobe Reader"). After I received a message: "Error 1606" could not access network location % APPADATA%\. What can I do? I can not uninstall and reinstall them.
Try this FixIt:
http://support.Microsoft.com/kb/2258121
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Vista Home Premium 32 bit freezes after an indeterminate amount of inactivity
For the last few weeks, my HP Pavilion dv6500 laptop has been freezing after periods of inactivity. Seems that the only change made to the computer until that moment was a Windows update that was late about 3 - 4 weeks. No other programs have been installed.
I have not precisely timed duration yet, but I think 10-15 minutes of inactivity in freezing results. Little happens is important if the lid is open or closed. Only "a freeze" is to do a hard restart.
I ran in Mode safe... same results. I did a system restore to a point before the update of Windows. I reinstalled the latest graphics and audio drivers. I ran SpyBot: Search and Destroy... we found an approximately 18 items requiring repair or removal, but it also has not fixed the problem. I ran Check Disk and the problem still persists.
I'm running out of ideas, and this problem is driving me absolutely crazy. I hope someone can help before I lose my mind. Thanks in advance.
Hello
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------
Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
similar are not enabled.Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)All the default power plans and then set them as you wish.
==========================================
Spybot is a fine program, however, it has two modes of residents who can cause problems with IE 8, Vista/Win7
and other programs. In the settings of Spybot, I stopped TeaTimer - SpyBot - settings. And then start - type
in the search box-> find Services at the top of list - just right-click on it - RUN AS ADMIN - look for SBSD security
Change-double click on it - STOP Service Center, then MANUAL. Now you can run SpyBot as one
scan on demand whenever you want. You will need to restart to stop TeaTimer to load again if it has been
the before value.I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
computer portable Pavilion dm1 freezes after appearance of the Office
HP Pavilion dm1 mini laptop computer Windows 7 64 bit Home Premium edition. Freezes the shortly after the desktop appears - no response from any action of the mouse or the keyboard. Wireless signal-meter at the bottom right shows the circle of rotation and does not seem to connect, but turn off Wireless (button) has little effect. At the restoration of the system to return two updates. Antivirus software is uninstalled. Memory test OK. CHKDSK OK. Works perfectly in safe mode with network. No error message. No new software installed recently. Worked fine on October 7 - no symptoms of imminent failure. Can you suggest a next step?
The problem spontaneously resolved itself last night. After a week of troubleshooting and research, the laptop is not cold as it had been. Still, it worked fine in safe mode, but would freeze after Normal reboot. I have not changed anything in these last days, other than to restart several times, in SAFE and NORMAL mode. Finally this morning it worked normally without freezing during the night. Not sure that the problem could be. Made several updates to Java and Windows without problem.
-
My new Windows 7/64 bit computer Dell freezes after being idle for 20-30 minutes
Some basic information:
(a) my laptop is brand new, I bought it less than a month ago and I started experiencing this problem in the beginning, very annoying.
(b) my laptop freezes after inactivity for 20-30 minutes, I have to remove the power cable and reconnect it to restart the computer
(c) the freezing happens daily when I have access to the Internet with Internet Explorer or Google Chrome, no difference between these two.
(d) I have Windows 7 Home Premimum with the latest updates.
(e) I get no error message when the computer freezes, it freezes only when idle, as when I leave my computer for 20-30 minutes
(f) I ran the disk check, I did the clean boot and I have configured the power setting, but the problem persists.Can someone help me? I searched this problem on the Internet and it seems to be a common problem with Windows 7. I've never had such problems with my previous computers with Windows XP and Windows Vista.
This isn't a common problem.
Do you have what programs or utilities maintenance installed?
This external devices you have connected?
Using Dell DataSafe? If not, uninstall
Do you wrong used windows update to install the recommended updates, as apposed to important updates?
-
Domain user on the laptop cannot access network folders
I have a user who has a laptop with Windows 7 Pro. The laptop is on the field. A week ago, some of its readers mapped network disappeared from his window of the computer - they have been set up with a logon script. When I tried remap readers, I got an error that the readers were already mapped with other identification information.
I tried to use wired and wireless and disabling NetBIOS. I tried to sign up with my own account, and after that my profile has been created I was able to access network drives without any problems, that tells me that this isn't a hardware problem.
I took a look in C:\Users and found 2 records for his profile, one named [username], another named [username]. [domain]. The [user name]. There is a padlock icon that tells me that it is the account currently being logged record [field]. However, records (e.g. office) are all empty, so it is somehow redirecting to the files under the profile of [username]. I backed up and deleted the registry key for its profile and restarted the computer, but this only created a NEW temporary folder called [username]. [domain]. 000.
Short to save all files in [user_name] and suppression of all profiles or do a clean install of Windows is there anything else I can try?
When I tried remap readers, I got an error that the readers were already mapped with other identification information.
-> The command console
net use
tell you what actions are mapped. And the console command
NET use * / del
Removes all existing connections to share.
I tried to use wired and wireless and disabling NetBIOS.
-> Ping your server would immediately you tell if you have network connectivity.
The [user name]. There is a padlock icon that tells me that it is the account currently being logged record [field].
-> How to lock that only takes into account with administrator privileges have access to this folder.
I backed up and deleted the registry key for its profile and restarted the computer, but this only created a NEW temporary folder called [username]. [domain]. 000.
->, You can force Windows to use a given profile folder manually by setting the name of the folder here:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList\S...\ProfileImagePath
Search for the incorrect path name (. domain.000 [username]), and then change the path.
Your questions are indeed more suited for a TechNet forum.
-
I have a mac with an SSD, it freezes after almost exactly 60 minutes
I have a Mac with an SSD. It freezes after almost exactly 60 minutes and made for quite awhile - new version of iOS makes no difference
What specific model Mac?
Install a speed temperature and fan monitoring app like the following to see if overheating is the cause of the problem
http://www.CrystalIDEA.com/Macs-fan-control
- Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.
Search before the journal entry that begins with BOOT_TIME since it is the first line of ahttp://www.crystalidea.com/macs-fan-control start
Maybe you are looking for
-
The Norton toolbar does not appear on my desktop version of Firefox 24.0. It does not appear on my portable version of Firefox 24.0. The office shows that Norton was disables as incompatible with 24.0. But there is no button 'enable '. How to do back
-
Slow pre-launch sequence on end of 2013 rMBP13
Hi guys, I tried to understand this problem of slow boot for about a year and a half now, and I can not pin down what is the problem or how to fix this reliably. I have an end of 2013 rMBP 13 running El Capitan (although the problem existed in Yosemi
-
Upgrade processor to HT?
Dear Sir. I use tecra m2 745 without HT technology pentium: is it possieble to install another treatment with techno HT?Thank you Reg weekx
-
Hello! Can you tell me how I do Hard Reset for spectrum xt 15-4000er! NB don't turn on. Just buttons power lighting and free wi - fi to August 5 dry.Thank you.
-
Discourteous interruption of the sessions of the computer
Why Microsoft must barge, as a tyrant, without request, and my computer restarted my computer to install "updates" of doubtful results?