IMac will not close - have reset SMC/PRAM etc - what to do next?

I have an iMac 2011 (impossible to get more info as it "attempts" to close) - El Captain fully patched.

Here's what I did:

Reset the SMC

Reset the PRam

Checked and run repair disk (no problem)

don't made sure no programs or applications were open before you stop (via command pkill)

This computer shutsdown only when I press the power button.

That then should check or just dropkick the POS?

(super glad I backed up everything and moved to external hard drive)

It also takes forever to start, when I restart it. Charge of Apple logo, it fills up half, screen turns white, 10 minutes later, it loads the OS.

GRR...

Your installed system is bad garbaged by stuff you have installed and used. Start from scratch:

Install Yosemite or El Capitan, from scratch

Backup if possible before proceeding.

  1. Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:
  2. Select utility disc in the Menu Utility, then click the continue button.
  3. When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.
  4. Click Delete in the main window of disk utility. A panel will fall.
  5. Define the type of Format Mac OS extended (journaled).
  6. Click on the apply button, then wait for the done button to activate and click on it.
  7. Quit disk utility and re-enter the Utility Menu.
  8. Select reinstall OS X and click on the continue button.

Tags: Mac

Similar Questions

  • My iMac will not close since the last update

    Since the last update for El Capitan, my iMac does not stop and I hold the power button so he can close. Has anyone else had this problem? I'm nervous to download the update on my Macbook pro in case the same thing happens. Also has anyone had a solution.

    Uninstalling the Wacom software.

  • My system is continuously restarting and willingness to complete start only in safe mode. System Restore will not work even through DOS command. What to do next?

    Running Vista SP2 64 bit on a Dell Inspiron 530.  System will come up to the login window, if there is no connection - will restart on its own, repeatedly.  It will allow me to log in, but as soon as I get on the desktop, in a short period of time, it will restart.

    I am able to connect through safe mode and safe mode with networking mode.  I tried the system restore by selecting many different restore points using rstrui.exe / offline: C:\windows command safe mode.  The operating system is running on the C drive.  Status on C «Ready to restore» watch

    He always enough immediately cause the error:

    System restore failed... System restore failed due to an unspecified error.  The parameter is incorrect.  (0 x 80070057)

    I did not knowingly install something again before that happens.

    What to do next?

    Hello

    Here's how to use the system without a command restore.

    http://bertk.MVPs.org/html/restoresysv.html

    And information of Dell.

    How ro reinstall from the Dell recovery partition:

    http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

    Reinstalling the printer Dell supplied disk:

    http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

    Reference Dell troubleshooting with startup problems:

    http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_343119

    Run the built-in diagnostic software:

    http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266787

    And if this does not resolve your problem, please contact Dell or their Support Forums:

    http://en.community.Dell.com/support-forums/default.aspx

    See you soon.

  • iMac will not close with menu Apple

    I can no longer stop or restart my iMac by selecting Apple menu, only the power button. I know that this is not preferable, I get the message that I have 'stop because of a problem' whenever I restart with the open the last known windows option. I use El Capitan 10.11.6 on a w/2.8 Ghz Intel Core 2 Duo, 4 GB 667 MHz 2007 iMac and a disc SSD of Crucial from 2 TB to address 4 - months old. I have read many other threads and found no match to this problem. I have nothing of freezing. I did a check of HD with disk utility, and no not found errors. I always have to close open programs before you shut down, and Activity Monitor shows no CPU hogs in action before you try to stop. Other that auto update for various programs the only thing I added in the past two weeks when it started is Dropbox and go to the meeting, the two needed for a project. I returned and eliminated those when the work has been done, still have the problem. Run the paid version of ClamXav, up-to-date and the last scan revealed files without problem. I would try a restore to a previous setting, but just by chance my WD My Book crashed and I had to reformat so nothing to fall back on.

    Hi texaskellys, you can try the steps in the Apple Support topic:

    OS X Yosemite: log off, sleep, restart and shut down

    I wouldn't go too far without a good backup.

  • 10.11.3 iMac will not update more far - why?

    10.11.3 iMac will not update more far - why?

    What happens when you try.

    Have you tried to download and install this?

    Download update of OS X El Capitan 10.11.5 Combo

  • After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

    After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

    Please test after taking each of the steps that you have already tried:

    Step 1

    Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

    Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

     ▹ System Preferences... ▹ Sharing

    Disable all sharing services.

    Step 2

    If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

    Step 3

    Select

     ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

    Step 4

    Select

     ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

    and uncheck the two boxes marked

    Open Bluetooth Setup Assistant at startup if...

    Step 5

    Reset the printing system.

    Step 6

    Back up all data.

    Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

    /var/vm

    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

    A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

    Restart the computer and empty the trash.

  • CD ROM tray remains open, will not close

    CD Rom tray will not close. When I restart the PC the tray closes but opens again and stays that way.

    Hello

    1. have you done any change in software on the computer lately?

    Method 1.
    If the problem persists, start the computer to start clean and control state.
    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    Method 2.
    Also, check with the manufacturer of the DVD drive and check for possible mechanical damage on the drive.

    I hope this helps.

  • Web sites will not close. How can I force them? Cannot close their or firefox.

    I have three tabs that will not close or allow me to close firefox.

    Start Firefox in Mode safe to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    To turn on safe mode

    • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
    • Once you get the pop-up, simply select "" boot mode safe. "

    If it works in Mode safe mode and normal mode with all extensions (Tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

    Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: ' Firefox > quit Firefox. " Linux: "Firefox/file > exit ')

  • With Firefox my fonts e-mail decreased and will not respond to reset, but problem goes away when you use Explorer

    With Firefox my fonts e-mail decreased and will not respond to reset, but problem disappears when you edit from Internet Explorer. This happened with no incentives from me about two weeks ago, and no resets respond to the email. Occurs only with Fox. With ie I enlarged and adjustable policies.

    Have you tried to resize the text size by pressing CTRL and + at the same time (increase font size)?

    Otherwise, you can reset Firefox on its default settings by following the steps here: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

  • iMac will not fall asleep

    My iMac will not fall asleep, well put me in mode 'sleep' manually or automatically after 10 minutes of sleep. The screen will be disabled for a few seconds up to a minute and then wake up to the top. I have restored the default settings in the energy saver to try to fix it. The problem occurred yesterday, but I've never had this problem before. I did not any changes to settings or my computer until this problem occurred. Any help would be greatly appreciated. I would like to know if anyone has need for more information!

    Sleep - determine why your Mac Wakes Up from sleep

    Sleep - why your Mac can not sleep or stay in mode 'sleep'

    Up wake up Sleep - don't/don't stay dormant

  • All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen

    All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen "Acer Explorer beyond the limits; Powered by Android.

    What should I do?

    Problem with the cord/charge plug unit... is very loose and since I bought it. It takes an extraordinary amount of time to load. Is it defective?

    According to the description of the connection of the power supply or you have a problem with the power outlet (perhaps folded ut of shape enough to cause free adjustment) or Charger (connection flashing in-house, exit misfeed or simply that bad). If I was in your position I would take back and get one without load problems. You can send it through Acer support and they will fix it for you, but back to the seller will be faster.

  • Photosmart 3210xi top will not close

    I have a HP Photosmart 3210xi that top will not close. It was opned the same as you would to change ink carterage

    I wish I had an easy answer for you. These hinges are difficult to reach. You could give a few quick shakes up or carefully lift the unit a few inches upward and drop the table to try to unlock the hinges. Put something to protect the scanner glass where the top down.

    I don't think that the cold would damage unless it was very cold, is it possible, that the plastic can get rigid.

  • BlackBerry Smartphone app Center will not close! Help!

    I don't know if anyone has faced this... but my app Center will not close!

    When I pressed the bb and the small menu appears in the center of the app are still there... If I click on it it does nothing.

    I tried to reboot (battery and everything), opening center app (just opens a new one out while both are open)

    I don't know what happens >.

    also on a side note... a small blue apperaed icon next to my bars of reception with a symbol in it... i can look for that when I get home... but I didn't know that until today...

    The application Center never closes.

    you will always have a minimum of 5 'applications' running:

    App Center

    Browser (make sure that it is not on a web page)

    Home

    Mail

    'Call' screen

  • After IOS 10.0.2, camera will not close

    Just did the upgrade to the new IOS, and now everytime I open my phone or my pad, the camera is open and will not close. Reboots do not help.

    Hello. Can you explain more? You open the smart cover or click on the Home button and immediately see the camera? You should see the lock with a message screen to press home to open. The lock screen is now configured with the page today (widgets) on the left and on the right camera, so you can drag to get access without having to open the iPad. If you enter the camera, by error, by clicking on home leaves you.

  • My iMac will not delete mail.

    My iMac will not delete mail. When I try to delete, (move to trash), I get this type of message the message "up to 75% o! surprise sale is here + free delivery"could not be moved to the mailbox"Trash - on My Mac""9346661.emlx"could not copy to 'Messages', because an item with the same name already exists. »

    What is happening and how to fix it?

    Try to delete/empty the trash, try again and then tell me.

Maybe you are looking for

  • Windows XP SP1 back to factory settings - unable to download SP3. any suggestions?

    I just got back my computer to factory settings.  The operating system is Windows XP Home Edition with Service pack 1 installed.  I need to download and install Service Pack 3.  Can someone tell how can I do this?  Microsoft advises me to use automat

  • OfficeJet J4550: Could not load the driver for the WIN10 - installation hangs

    Updated my Dell XPS to WIN10. I tried to upgrade the driver for my J4550 but installation hangs at the beginning of the installation process, "control systems".  When I tried the download, the old files from HP devices detected HP program and deleted

  • HP simplepass not work on HP envy 15

    Hi, I bought my HP envy 15 a month ago and simplepass was initially unresponsive (I'm under 8.1) so I had the help of a thread on this forum and it worked perfectly until I installed the software (Solidworks). Now, the fingerprint reader lights up on

  • Problems with Maxx Audio after Windows 10 'upgrade '.

    It seems I'm not the only one with this problem. I use a laptop computer Inspiron 17R 5737 provided with Windows 8.1. After upgrading to Windows 10, I noticed two things: 1. audio Dell, my Waves Maxx Audio 4 works, but miss me all my presets in the Q

  • Suddenly appear window not genuine 0xC004F063

    Diagnostic report (1.9.0027.0):-----------------------------------------Validation of Windows data--> Validation code: 50Validation caching Code online: n/a, hr = 0xc004f012Windows product key: *-* - Q6MMK - KYK6X-VKM6GWindows Product Key hash: 289No