Similar Questions

• NOR-MAX recorded do not channel setting correctly

  I'm developing a system using Modules of field Point. I use 7 LabVIEW and NOR-MAX 3.0 to create commands and attributes for the FP-PG-522 module.

  To create an attribute of channel using NOR-MAX 3.0, I selects the FP-PG-522 module in the section of remote systems, select the desired channel, select the string attribute, then select Create point.

  A new item now appears in the data area. When I select this element, there is a description in the section 'Channels used on this point', which describes the attribute. For example, I chose the market time attribute. For this article, it says "this element represents the 'On Time' of the channels selected attribute. This attribute can be set to any integer between
  1 to 65535. "

  Then, I hit the SAVE button, which shows how to save the IAK file locally, so to save it on the module of ps2000.

  If I close OR-MAX 3 and restart, when I select the same new element in the data area, the attribute has changed. It doesn't seem to be any pattern, but I had such combinations as the "control" attributes, instead of the attribute "Generate impulses", etc..

  Then I have to delete all these channels and start again, however, data are still once, not saved correctly.

  Someone else knows this and knows a way around it?

  Chris,

  This problem has been identified and the fix will be included in the next version of FieldPoint software.

  I just wanted to let you all know.

• Images not appearing NetInstall do not.

  Hey all!  It's my first time setting up a server of NetInstall and, as far as I know, everything is set up correctly - but none of my images are appearing.  That being said, I have my server set up using a static IP address that is on a different subnet than the rest of my client IPs (172.16.200.x for servers, 192.168.142.x for customers).  Honestly, I'm not sure of how to proceed and hoping someone can point me in the right direction.

  Any tips?

  NetBoot will never exceed the limits of subnet without configure NetBoot helpers (relay). The simple answer is to put the NetBoot server on the subnet of the client.

• Why are my images not display correctly in CS6?

  I have a laptop Vista (old)... only 4 GB of memory; slow; small screen; etc.  It is simply not a good environment for image processing.  I bought this laptop in particular because it fits in my backpack when I travel.  I have almost never use Photoshop on this computer, but when I did there is no problem.

  I just uninstalled CS3 & installed CS6.  Now the images display incorrectly on the screen.  They show as completely transparent, just "Articles" of the image or perhaps even of the "sections" of the different layers.   Looks a bit corrupted images (when it is not completely transparent).  The layers palette shows the thumbnail.  If I move my mouse, the image & click the 'bar' just above the superior rule will appear until the mouse button.

  Would it be because preferences are not set correctly?  I didn't change the default values.

  

  

  You probably have many questions with this old computer. I doubt that the graphics card can handle CS6. You can enable the processor graphics to use in the preferences running, or is it gray? CS6 does not work well on XP and Vista is even older. I seriously consider getting a new laptop. There are many nice small ones that fit into backpacks with fast SSD drives.

• Compressed file (zipped problem)! Failed to open due to the "open with..." function. "do not set correctly.

  I'm having a problem with compressed (zipped) folders. I'm unable to create brand new. Maybe it's because the function "open with...". "for compressed (zipped) folders is not set correctly, they still appear as programs Adobe instead of compressed files, which makes them unable to open or run. How can I use "open with...". "to open the files compressed as compressed folders? I'd appreciate any help I can get. Thank you.

  File association fixes MVP Ramesh - includes .zip
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html MS - MVP - Elephant Boy computers - don't panic!

• How does password manager does not work even if the settings are set correctly?

  I've recently returned to version 3.6.17 4 cause version 4 was unstable. Now that I have the old version (more stable) offer not password manager record passwords more even when the settings are set correctly.
  I notice that I had viruses and rootkits deleted (maybe they did some damage) and I cleaned my system with a registry cleaner (maybe he removed some settings through it) and this has not fixed by a clean install.

  You still see the names and passwords in the Firefox password manager?

  Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).

  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck: [] "Permanent private browsing Mode.

• Apex 5, call a modal page, set page elements, in values referenced title page elements are not the same (correct) than the item itself

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO., DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can run to display the values of the correct point in the title of the page corresponding to the values of the correct page element (that I have hidden).

  Y at - it something more to do, or it could be a small bug?

  I've created a little demo app on
  https://Apex.Oracle.com/pls/Apex/f?p=75955:2

  WS: AMLWS001

  Demo/demo (developer is)

  Please see the report 1.

  Thank you in advance!

  André

  Hi andremi,

  andreml wrote:

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can make it work to display the values of the correct point in the title of the page corresponding to the values point right page (what I have hidden).

  Y at - it something more to do, or it could be a small bug?

  Page title is rendered before the page elements, that is why is not highlighted in your title.

  I don't think directly, we can use the page as a page element value.

  Creates a copy of yours and made the change it new App id - 45390

  There, I created a static area without a model before your report area and put your article into that.

  then displayed title PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME. for the area of your report.

  Kind regards

  Jitendra

• Captivate9 images only play correctly in the timeline with a simple click of the 'play' button. Images not working don't not in publication or in part mode.

  Design of a project in Captivate 9 and I have slides which have up to four images appear as audio talk about them on specific slides. My problem I have is when I single click on the play button on the timeline, images, and audio all play properly and in sync. When I select to get a glimpse of a slide or publish the file. Captivate times only the first picture on the slide, none fade in or disappearance of the first image and 2nd image doesn't appear at all. Or my other images will appear. Any suggestions or recommendations for my number is greatly appreciated.

  Tami

  When you use play Slide you do not have a real overview.

  As I suspected; you have added 3 buttons, which are a break from the slide to 1.5secs. This means that only objects that have their chronology from before these points of suspension will not be visible until you click on these buttons. You have another click box, I do not know for what reason, which suspends the slide at its end.

  Either move you the point of suspension to a location after the entry of the last image button, shortly after 40 seconds and you can get rid of that click on the box or going out the break FRO the buttons and keep the click box. Use the timing Panel to get rid of the break for the buttons if it is your choice.

• Image not appearing is not in the develop Module

  I've seen a number of discussions on this, but unfortunately the proposed solutions do not work.

  When I access the image in the develop module it will show initially, but a setting I'll do the image not displayed (they do in the browser preview in the upper left corner), generally the image then disappears. After that, when I select the image it leaves a white screen where the image should display.

  When the question first, I checked and the GPU acceleration could not be turned on due to an error. I went and updated my driver, but unfortunately I have an AMD Radeon 7670 graphics card and I discovered the hard way Lightroom CC is not compatible with this graphics card and the latest driver so when I accessed to develop module lightroom instantly if is crushed, regardless of whether or not the graphics acceleration was lit.

  • AMD Radeon HD 5xxx series 8xxx graphics card run versions 14.501.1003 & 14.502.1014 driver

  I was able to go back to the older version of the driver, 13.152.0.0, Lightroom will run without crashing, but still have the original problem, I can't use the develop module.

  Any suggestions? At this point, I'm tempted to restore the previous version of Lightroom, but I'm hoping to avoid that, as I have ingested, the tag and assessed to nearly 2500 pictures and would really prefer to keep this work.

  Version of Lightroom: CC 2015.1 [1025654]

  License: Creative Cloud

  Operating system: Windows 8.1 home edition Premium

  Version: 6.3 [9600]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.3 GHz

  Built-in memory: 16322,1 MB

  Real memory for Lightroom: 16322,1 MB

  Real memory used by Lightroom: 948,9 MB (5,8%)

  Virtual memory used by Lightroom: 928,0 MB

  Memory cache size: 59.2 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2, AVX

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 2560 x 1440

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: Yes, keyboard: No.

  Graphic processor News:

  Check the supported OpenGL: failed

  Vendor: ATI Technologies Inc.

  Version: 3.3.12422 context 13.152.0.0 the base profile

  Renderer: AMD Radeon HD 7670

  LanguageVersion: 4.30

  GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS (real = 32, minimum = 48)

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: K:\FILES_0001\lightroom_catalogs\lightroom_catalogs_0002_150709\lrcat_all_0003_130613_lr5 \lrcat_all_0003_130613_lr5-2.lrcat

  Settings folder: C:\Users\Sean\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) HDR Efex Pro 2

  (6) jf PicasaWeb

  (7) attachment Plugin Leica

  (8) export of LRT

  (9) attachment Plugin Nikon

  (10) perfect B & & W 9

  (11) perfect effects 9

  (12) strengthening the perfect 9

  (13) perfect photo Suite 9

  (14) perfect Portrait 9

  (15) resize perfect 9

  (16) PhotoShelter

  Config.LUA flags: None

  Map #1: Seller: 1002

  Feature: 675b

  Subsystem: 6888103c

  Revision: 0

  Video memory: 1003

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Out of DP AMD (AMD High Definition Audio Device)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  Looks like a problem of ICC profile.

  try to set your monitor to sRGB, or re - launch your calibration software (IE; XRite Colormunki)

• Some images not appearing is not in Live View mode?

  Hello

  Recently, I upgraded my Dreamweaver CS5 and have noticed that some images are appearing is no longer in Live View mode. When Live View is clicked, both images are displayed in Design view and preview in the browser; However, when you click on Live View, the question mark appears for new photos that have not been used in Dreamweaver before the update. Does anyone know a fix for this? I tried to uninstall/reinstall the software. Thanks for your help.

  What is the exact code of images path?

  How big are your images (file size)?  You optimize them for the web in your graphics editor before you insert in your web page?  Are they saved in RGB and CMYK not?

  Nancy O.

• Discover images not appearing is not in the design

  Hi all!

  I'm having a problem with my images not appearing is not in design mode. I can see them when I view the page in a browser, however. I am new to dreamweaver and am not a coder, but > & nbsp < appears in the html page where the imamge should be. If someone could please help me solve this problem, I would appreciate it.

  Thank you!

  kelseym333 wrote:

  should I just make the change in the code itself, or is there a problem with the folder? In addition, there a picture as background in the header as well. The images were made in photoshop. I just saved them as jpg files. I have to do something else for them so that they work in dreamweaver?

  The images have been saved for the web?

  I don't know exactly why the file extension is missing on the file name.  What is the name of the file when you look in the active panel or in the File Manager window?

  How do you insert the image?  By "insert image" and then navigate via the property inspector to locate the image and insert it?

  Or did you manually write this code for the image yourself?

  I can't see a linked image in the header code, unless you used a background image in the style sheet.

  See, that's why he's still beteer if we can see a site 'live', because most of us can see the and the CSS styles in the browser and it helps us to solve the problems.

• image not appearing is not in browsers

  I have an image that appears in the "live view" in dreamweaver, but when downloaded to a browser, nothing shows up except for the word "logo" in the upper left corner of the page, this is the URL " " http://www.guaranteed-issue-health-insurance.com/ "is the code for the image "

  "<div><img src="logo_insurance_leads.png" width="320" height="109" alt="logo" /></div>"
  Thank you.
  

  The image shows in my browser when I use - http://www.guaranteed-issue-health-insurance.com/logo_insurance_leads.png.

  But you have the wrong location in your HTML-

  /images/logo_insurance_leads.png" width="287" height="80" alt="logo" />
  
  Remove the /images/ from this code.
  
  PZ
  

  .

• Can not find the correct driver in Macbook - J4680c

  Hello!

  just install a print server on the network from my boss - netgearPS121v2.  everything is great with 2 Mac and a PC - everything can print, etc.

  all the macs print to print IP assistance and the appropriate driver.  for some reason, my boss pro macbook did not have the correct driver installed and all that is available to him is "HP Officejet J4680 series - Fax" that does not work.  I use the same macbook pro with the same system (10.6) and did not have a problem.  his machine was the Guinea pig for his assistant try to set up while on the phone with HP tech support.  (I was out of town and unable to install).  I have a feeling that this was an inadequate installation and hampered by technical support, try to fix it.

  any suggestions on how to completely uninstall the HP software so I can't completely re - install?

  Thank you!

  Steve

  Well Yes,.

  I guess that someone loaded the HP from the CD for the printer software (which is only 10.5 or earlier version).  Here's how to correct:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• Error: Accounting information is not complete. Some required fields are not filled out correctly.

  Before I left to go on vacation, my Acrobat Pro XI worked perfectly. No hiccups, no errors, etc. Now that I'm back and I need to print a PDF in it, I constantly get an error message appear when I hit the "print" key.

  The accounting data are not complete. Some required fields are not filled out correctly.

  I don't know what this message means because I went through all imaginable areas in the menu printing, nothing helps. I checked tools, sign, comments, everything I can think of to try and see what the field is not filled correctly, but nothing fits. From now on, I can't print anything at all of Acrobat Pro and I really need to get this print for a meeting later today. So if someone could try to help, I appreciate it. Thank you.

  If the problem comes from the printer driver. While IT worked on my machine Friday, they have updated the driver and it automatically sets the posting to Enabled. Now that he is set to disabled, I can print without problem. So I guess it's fixed for now and if it comes back I know exactly what to look for.

• You see only not my setter but seeing my getter?

  I have a daughter who has two methods, a get accessor and a Set accessor. they are the name of the file name. I can see the Get accessor very well after this class is instantiated, how ever my setter is a SUV. So I deided to test a theory and change the name of my fileObject bomber and then I see it, the Set accessor. But when using it I get the error: method maybe not set fileObject

  The two methods are published. The game returns nothing and the get returns a string (we know how to do the getters and setters).

  Why (that is, a public method) not appear as a series of possible methods to choose?

  you do not use your setter correctly:

  package
  {
       public class VectorSample //renamedClass
       {
                  private var lxo:LoadXMLObject = new LoadXMLObject();
  
            public function monsterFile(file:String):void
            {
                 lxo.fileName = file; populateMonsterVector(lxo.returnXMLObjet());
            }
       }
  }