NOR-MAX recorded do not channel setting correctly

Similar Questions

• I try to communicate with the third instrument via the usb port but I don't know how to do same in nor-max, I'm not able to see devices usb port symbol and section of the Interface.

  Hello

  I am tring to connect my power supply that is not or via a USB cable, but I am not able to see my connection or the not-max usb symbol.

  first time I use it will you please guide me, and is there a driver I need to download for this? Here, I put one attachment regarding this.

  Thanks in advance.

  
  

• Image not appearing is not in setting correctly

  When I put an image file, the image does not take place in the framework. I can see the Center, but it's as if there is a border around the image, cutting the edges, even when the framework encompasses the whole image. Can someone tell me why this is happening and how to fix it? This does not happen with all images, just sometimes, as if InDesign decides that it doesn't like a picture. I tried to edit and save as a new image and put it on the new documents, nothing works. example: this image extends downwards and to the left and should be visible because it is completely in the blue container.

  My best guess is that there is a mask applied to the image.

  If the path is defined as a clipping path in photoshop, it will apply as soon as the image is placed.

  It can not be applied since in InDesign under object > Clipping Path > Options, then change the Type to zero.

• Attributes in NOR-Max not found in Labview

  I'm currently developing a LabView tool (2011) with a camera from Manta G504B Ethernet. It is NOR-compatible IMAQdx but in NOR-MAX attributes are not the same as those found in LabView. I would like as my tool developed to be able to change the exposure and acquire values and lifestyles. However, these attributes do not appear in LabView but appear in NOR-MAX. is it possible to get these attributes in LabView, since these values will change very frequently?

  My Manta firmware is 00.01.44.00

  NOR-IMAQ is 4.6.1

  E/s-OR-IMAQ is 2.5

  NOR-IMAQdx 3.8.1

  NOR-MAX 5.0.0f1

  Answer was found with the example OR grab and Attributes.vi base.

• How does password manager does not work even if the settings are set correctly?

  I've recently returned to version 3.6.17 4 cause version 4 was unstable. Now that I have the old version (more stable) offer not password manager record passwords more even when the settings are set correctly.
  I notice that I had viruses and rootkits deleted (maybe they did some damage) and I cleaned my system with a registry cleaner (maybe he removed some settings through it) and this has not fixed by a clean install.

  You still see the names and passwords in the Firefox password manager?

  Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).

  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck: [] "Permanent private browsing Mode.

• Compressed file (zipped problem)! Failed to open due to the "open with..." function. "do not set correctly.

  I'm having a problem with compressed (zipped) folders. I'm unable to create brand new. Maybe it's because the function "open with...". "for compressed (zipped) folders is not set correctly, they still appear as programs Adobe instead of compressed files, which makes them unable to open or run. How can I use "open with...". "to open the files compressed as compressed folders? I'd appreciate any help I can get. Thank you.

  File association fixes MVP Ramesh - includes .zip
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html MS - MVP - Elephant Boy computers - don't panic!

• Apex 5, call a modal page, set page elements, in values referenced title page elements are not the same (correct) than the item itself

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO., DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can run to display the values of the correct point in the title of the page corresponding to the values of the correct page element (that I have hidden).

  Y at - it something more to do, or it could be a small bug?

  I've created a little demo app on
  https://Apex.Oracle.com/pls/Apex/f?p=75955:2

  WS: AMLWS001

  Demo/demo (developer is)

  Please see the report 1.

  Thank you in advance!

  André

  Hi andremi,

  andreml wrote:

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can make it work to display the values of the correct point in the title of the page corresponding to the values point right page (what I have hidden).

  Y at - it something more to do, or it could be a small bug?

  Page title is rendered before the page elements, that is why is not highlighted in your title.

  I don't think directly, we can use the page as a page element value.

  Creates a copy of yours and made the change it new App id - 45390

  There, I created a static area without a model before your report area and put your article into that.

  then displayed title PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME. for the area of your report.

  Kind regards

  Jitendra

• NOR-MAX for VISA DURATION 4.2

  Hello

  I posted this on the Narcotics Control Instrument, but maybe it's not in the right place since I didn't get all the answers. Here's my question:

  I have been looking for more than an hour and have not led to what. Is there a version of the NOT-MAX runtime? I have deployed executables LabVIEW on many other PCs and I encounter a problem on one of them where the resource VISA vi does not return the exact list of the COM ports even as drop-down list of the vi box VISA set up a Serial Port. For example, the list box might show COM1 and COM4 COM10, but VISA resource find vi shows ASRL1::INSTR, ASRL4::INSTR, and ASRL12::INSTR (should be ASRL10::INSTR). So I need a program such as NOR-MAX to change the alias on the PC with the execution of VISA 4.2 engine so that it corresponds to what shows the VISA configure Serial Port vi, incidentially, that matches what is shown in Device Manager.

  The PC in question does NOT the LabVIEW development environment installed, so it has NEITHER-MAX. is there a stand-alone exe OR-MAX I can install it on other PCs without the IDE LV? Manual change of visaconf.ini will do the trick? If so, is that what I should remove all aliases, uninstall all external (VCP) ports in the Device Manager, restart the PC (or not) and start again, reconnect the devices?

  Thank you for any help or advice.

  Ed

  James,

  Thank you for your response. Yes, I use the Application Builder and no, I chose not install NOR-MAX, but I see there in my file of project under "additional installers. I will consult the installer to run from the Web site of NOR.

  After that I posted this question, I have experienced yet. I have manually edited visaconf.ini so that numbers ASRL agreed with Device Manager of / ' Windows port assignment and low and behold, it worked! If this happens on the PC client, installation of MAX would probably be best solultion, however.

  Now I'm wondering if the VISA resource find vi is just read this file? I guess that Yes.

  Thanks again,

  Ed

• Lost the remote TCP/IP connection through NOR-MAX

  "" Hi, I try remotely LeCroy WaveRunner 104Xi oscilloscope through "resources VISA TCP/IP" option in Control Panel OR MAX, but the VISA session is lost (0xBFFF00A6) right after I viWrite the '* IDN?" order several times.

  Here's my full configuration process:
  1. install the Passport VISA LeCroyVICPPassportInstaller_1.0.8.exe , LeCroy oscilloscope

  2. setting of the session to follow the instructions (as per joint, LAB_WM827.pdf)

  [by the way, I'm not able to configure the session as "VCIP:'type', I only be able to configure the session asTCPIP0:: 1861:OCKET" ""]
     
      TCP/IP resources VISA-> Create TCP/IP new resource...-> Raw Socket
     Set the IP address: 137.57.96.8 (this IP address is successful to be ping by PC and this address is of course belong to the 104Xi WaveRunner oscilloscope)
  Set the port number: 1861

  3. then, there will be a new resource under "resources VISA TCP/IP". Select this option and 'VISA Open Session'. A dialog box will be retractable to the communication of the instrument.

  4. go to the tab "viSetAttribute", the value VI_ATTR_TCP_KEEPALIVE to VI_TRUE, VI_ATTR_TMO_VALUE the value of 15000.

  * NOR-MAX Version: 3.1.1.3004
  * Connection: The ethernet cable is used through the server (No 1 to 1 connection) of the company,

  "After all this, I send '* IDN? \n"(dans l'onglet viWrite ), it returns the value 0 (which means no error occur) and return 6 counts. " So I try to read a buffer (in the viRead tab), but it send me error timeout (VI_ERROR_TMO). After that, I erase the buffer in viClear. Then, I repeat same steps, this time he (viRead) return me connection lost error (VI_ERROR_CONN_LOST).

  This situation is repeated every time that I reopen it new session. In the meantime, I also doubt that the viWrite did send the command to the oscilloscope or not. The oscilloscope was no response after that I have send "ASET" (WaveRunner 104Xi order for autosetup oscilloscope) through the viWrite tab.

  I am out of ideas now.

  What's my configuration OR-MAX problem? or hardware problem? or a server problem?

  Please advice... need help badly.

  Thanks in advance.

  Hi wcsoh,

  Alan and LeCroy Support here...

  Use the type of connection (LXI).  The problem is that when you use the connection TCP/IP (ACIP) type, you cannot configure the WaveRunner 104MXi as a resource of VISA's TCP/IP in MAX.   Note that MAX is not 'hip' to recognize any instrument type TCPIP, including extended via ACIP LeCroy.  To use LXI, go to utilities > utility configuration... and then to the 'Remote' tab, where you will find the button on the left side of the screen of config to use 'LXI '.  If you don't see this button, you will probably need to update your firmware.

  With the type of connection (LXI), you can automatically find the scope through MAX, enter this amount as a VISA TCP/IP resource and configure an alias as well...  You can also point your web browser to the IP address of the bezel, and you will see a status page with information, including the name VISA always useful resource to use when you configure the scope in MAX.  (Note, however, there is no need to use MAX at all when the connections of VISA to LeCroy oscillloscopes!)

  Here is a link to an application note written by me which deals with the LXI interface, including information about the configuration of MAX to show scope: http://www.lecroy.com/tm/library/AppNotes/LXI/LXI_Interfacing_AppNote.pdf

  Do not hesitate to contact me for any question!

  Best regards

  Alan Blankman

• A network cable is not plugged in correctly or may be broken?

  My internet works fine sometimes but then sometimes it doesn't. And when I troubleshoot it say "a network cable is not plugged in correctly or may be broken. No idea what's wrong? Also all my other devices are fine, that only this laptop seems to have this disorder

  What is the make and model of your router?

  The problem occurs when you are in the same room as your router... or when there are several rooms by far?

  Problem could be caused by interference with wireless networks your neighbor's wireless.

  If you are comfortable setting in your router Wireless Setup, sign up for your router and change the channel. Use channels 1, 6 or 11.

  If you are looking for this word: inssider
  you will find a site that offers a free utility (inSSIDer for home) that can be installed on your computer in Windows 7 (there is also a version for Android... If you have an Android mobile phone.) With inSSIDer, you can see a graphical representation of all the signals of wireless networks in your location (that is, to the location of the device that is running inSSIDer) and which channel they use. You will see your wireless network (its force and channel), and if there are other nearby wireless networks on the same channel (and what are their strengths).

  inSSIDer can help you to choose a channel that has the least number of other wireless networks. But if you do want to use it, you can simply configure your router to use a different channel (different than he's using now) and see if that helps. You need not what whether for your laptop... just change the channel number of your router's wireless network.

  If you are able to change your router's wireless channel, then first of all sit in the same room as your router (as close to him as possible) and see if the problem occurs. Even if you encounter interference from your neighbor's wireless networks, when you are sitting next to your router... its signal should be strong enough to overcome any interference. So, if the problem still occurs when you're sitting next to the router, then change them channels most likely will not help (but if the problem goes away when you're sitting next to the router, then change them channels could help).

  Another thing to try is using your laptop on a wireless network (network of a friend, a public network, etc.). If the problem occurs when you use another network (and more sitting next to the router as you can), then change the channel will probably not help (but if problem disappears, could help to change the channel).

  There are a few other settings, you can try on your router, but first try the suggestions above to see if they help.

• Problem to run Agilent GPIB with NI-VISA card: recurring at Agilent VISA 32 report of open conflict that all things set correctly...

  Hi developers OR,.

  I have a recurring problem to correct my installation using a labview and Agilent GPIB card.

  Of course, the well-known configuration tips are generally defined:

  -Agilent VISA a VISA secondary (by-side mode)

  -the passport for tulip is enabled in NOR-MAX

  -OR-488 support active in Agilent librabry suite 16.1

  I uninstalled and reinstalled any component twice, but still get the same error message when I want to talk to a Keithley 2400 EMS:

  -Firstly, the agilent GPIB interface is correctly recognized expert Agilent connection and NOR-MAX

  -Then the instrument of 2400 keitjley initially works correctly in Agilent connection Expert and NOR-MAX

  BUT: when I try to send a command to the device (whether through the wizard or VISA using the Labview instrument driver), the tool returns an error (error "Application incomplete" punch followed immediately by a second "Invalid while in the local" error code)

  At the same time, the Manager (32 open report VISA) conflict in expert Agilent connection says "NI-VISA has returned an error. "There is a conflict of interface between NI-VISA and VISA Agilent". He suggested that the conflict occurs when different interfaces receive the same number of interface in the two VISA.

  Therefore, aware of the conflict that can occurs in a side-by-side installation, I tried to change the ID of Interface CLCL's Board of Directors in the Agilent connection Expert (from gpib0 to gpib9) and restart, but it did not help.

  So can you help me solve this recurring problem?

  Is it necessary to also change the VISA interface ID, or address of the GPIB Board Agilent GPIB in connection Expert? Wouldn't be the same address (9 for example)?

  I really do not understand.

  Sorry for this new message on the configuration of this topics, but I found no useful advice in the forums.

  See you soon,.

  Yoyo87.

  Finally, I got my system running after several tests, although I couldn't use NI-VISA as first VISA (allowing the tulip passport) with agilent VISA (permit for programs OR-488) at the same time.

  I uninstalled it all components of NOR and the agilent and re - install in the correct order (OR first, followed by agilent): nothing has changed.

  I check for updates of agilent and NOR and use several different versions of VISA at the same time: nothing has changed and I still communication errors when you try to send the order through NI-VISA Interactive control or labview (although it worked well by expert agilent of connection).

  I don't really know why, but I solved my problem by installing Agilent VISA primary visa. In this way, even if I do not see the Council of Agilent in NOR-MAX, I can always send control of GPIB instruments by labview using their VISA address or aliases defined in connection expert Agilent...

  I am always interested to understand why I was not able to run the two VISAs on my system with agiulent only one card PCI GPIB... so if one of you sees a clear reason for this...

  Thanks in any case, even if I don't have a lot of response on this topic...

  Yoyo87

• Rules are configured to my e-mail go to a certain folder, but it is not in the correct folder.

  original title: send rules

  I know exactly how to set up the rules for my email destinations.  Why will they not in the correct folders?

  I come back and check again until the last letter/number shipper address, etc... and they're always in the
  bad record.

  I use Windows Mail.  I can't find any option as shown above.

  This is a screenshot of Vista's Windows Mail message rules. Look in box 2.

  

• Videos in my card sd will not be imported correctly

  Hello, I tried to import videos from my sd card on my laptop and some of them will not be imported correctly. When I say it will not be imported correctly I average it says it imported, but when I click on the video screen is black and you can hear the sound in the video. Most of them imported fine but four have not up to now why is this and how to fix this? If anyone knows please tell me thanks!

  camera: sony alpha a5000

  I can view fine on the camera.

  My camera will not record anything without the sd card if it also helps.

  SD card: perfomance elite pny 16 GB

  Laptop: toshiba which has windows 8

  Sorry I don't know the model

  Dayana Hello,

   

  Thanks for posting in the Microsoft Community. I understand that you are unable to play the videos that you have imported from an SD card.

  To help you better, please answer a few questions.
  1. what player you use to play the file?
  2. What is the file format of the video files which you can't play?
  3 have you tried to play with different media player?
   

  If you use Windows Media Player, you can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992/en-us

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player can not read the
  file.
   
  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-8
   
  If the file format is supported, you can try the following and see if it helps.
  Method 1:
  Run the troubleshooting in the Windows Media Player library.
  (a) press Windows + C set, click Search, and then click settings and then in the search box, type Troubleshooting.
  (b) click on programs.
  (c) then run convenience store to Windows media player library.
  
  Method 2:
  1. in order to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties.
  On the file tab, look at the sections of video codec and Audio codec.
  2 download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download Codecs player
  3. configure the protocol settings on the Tools menu, click Options, and then click the network tab. In the Streaming protocols area, select all the check boxes Protocol. When connecting to a server running Windows Media Services, Windows Media Player tries to use all selected protocols.
   
  Hope the helps of information. Let us know if you need help with Windows related issues.
   
  Thank you.

• Web sites cannot remember in the address bar, despite the AutoComplete is set correctly

  Sites Web is not remembered in the address bar, despite the AutoComplete feature is set correctly. It's very frustrating. Can someone tell me why this is happening, please?

  Make sure that we are talking about the same thing. AutoComplete is to complete the forms.

  I think what you want is Options > privacy > Location Bar >... suggest nothing is probably what you are. Place in history/bookmarks as you wish.

• Record sustained notes?

  I try to record using the classic Electric Piano, and I will support notes while recording, however when I play the black of the recording, the notes are not supported.

  You mean... the notes gradually disappear over time... instead of playing at the same volume however long you hold them?

  If Yes, which is the way in which the Electric Piano classic is supposed to work... like the original which is emulated couldn't support notes either...

  If, however, you mean that the notes are short with no fade out little matter how long you hold the notes... so what do you use as input device Midi to enter notes?

  To check if its a problem with your input device Midi...

  If you select another preset as Orchestral Library > channels > movie channels for example... these notes are normally?

  Otherwise, the problem lies in your input device Midi...