color of plot questions

I do a program that takes a reading of a DAQ card. My problem is that I don't always want to see all the channels that we use. So I want the ability to disable channel (now using a Boolean true false checkbox on the right) and always see the other plots. I got this far but when I want the colors for the plot do not pass. For example, draw 1 I had green and 2 red. When I unchecked 1 the 2nd line turns green. I want to keep it red... Is this possible.

Thanks in advance

Hi Tech!

Try this.

Tags: NI Software

Similar Questions

  • color unique plot for all parcels in a multiplot screen?


    I'm plotting say 100 pitches in a multiplot view. Is there a way to trace all of this in a single color?

    Currently, I draw all and then go and change the color of each. The problem with this is that sometimes, the color change does not occur quite fast and a range of colors are visible on the tracks before all traces settle on the unique color.

    Thank you

    As long as you know the maximum number of locations, you may have, you should be able to set up the colors for all the plots in advance.   You can do it manually, but if there is a large number of plots, you probably still want to make the configuration programmatically.  To start, you init the number of plots in the graph or table. otherwise, the number of sites is defined by the data.  To do this, view the legend of the plot.  For a large number of plots, right click on the legend of the plot and select the index control so that you can manipulate it as an array.  You can put the index advance to '99' and click the init table command plot with 100 items.  Now you can set the color for all 100 locations programmatically.  Once installation is complete you can copy the control to another VI and/or save the VI / control with all the properties that they are, so you won't have to do during every execution of the actual program.

  • HP LaserJet 700 color MFP M775: question of impression

    HP LaserJet 700 color MFP M775 does not print color, only print in grayscale. I printed a page of demo/PQ troubleshooting page and the power state of the printer page, none of these colorful print prints.

    Also have changed all three colour... (Magenta, cyan and yellow) including the transfer kit and image of the hand, still the same... the laser but is mounting kit.

    Any help?

    It's a very strange problem.

    My first regular test for really strange questions would be updated the firmware of the printer.

    There is restrict the color settings in the built-in Web server, but I don't think that had an effect on the PQ test pages.

  • Having a color changing the question when you copy and paste things into a new document

    Hello, I had a question about copying and pasting in photoshop (something I thought I'd be able to handle).  See the screenshots below:

    First with the move selected tool, I went to command + click on the dark blue model below to highlight and select its layer.  Then, in the following screenshot with the marquee tool, I was trying to copy a square piece of 100 x 100 px of the model.

    Screen Shot 2014-12-03 at 4.31.04 PM.png

    After hitting the command + c to copy, and then I opened a new document with the following and click settings on ok:

    Screen Shot 2014-12-03 at 4.36.11 PM.png

    I knocked and then command + v to paste what I had copied the new document that I created.  However, the part gets confused me is that the color of the background pattern that I copied and pasted is now a different color, as shown below:

    Screen Shot 2014-12-03 at 4.27.38 PM.png

    The glued color is obviously much darker than the original.  Anyone know what is happening here?  Very confused.

    Some how you have copied a composite instead of the layer + styles.

    Try this instead, select the layer as you did

    Create a new document as you did

    Use the move tool and drag the document on the tab of the new document with the mouse still down, drag your document down to the new document.

    Because your new document is set to 100 x 100 is what adapts the layer, so you should be good to go.

    If you still have a question of color or something has not transferred correctly let us know.

  • Color of outline/question

    Two related questions:

    1. I want to assign a color to a solid line, but "the gap color" option in the pallet Contour does not work when a solid line is selected --is it possible to assign a color to a solid line?

    2. I also want to assign a color to a wavy line itself (and not the background of the wavy line) - is there a way to workaround to assign a colour to the wavy outline (or other traits)?

    Thanks in advance for the help.

    The color of the gap is not used to strong races - it sets the color of the white part of the overview of the race, but not for a solid line.

    To change the color of the outline itself - the color of the dots Black , dashes or waves in the preview, use the color or Swatch Panel.

    Click on the outline of the rectangle to select 'set the stroke color. To change it to "set the fill color, click again on the full rectangle:

  • Colors, original plot in a xy Graph to default values

    If everything goes well, a simple, but I can't find an answer.

    I've fiddled with the colors of the individual parcels in a xy Graph.  Now, I don't want their messed around, I want the old colours of return.  If I was creative enough, I could put them each in turn with a beautiful color, but I'm not.

    How can I re-initialization by default?

    Thank you!

    No problem - I have similar problems myself, being on v8.2.

    Here ya go!

  • Scanning color Photosmart 7520 question

    Hello. I've seen a number of posts in the forums on this printer do not scan in color and have already tried a hard reset and were also in the HP utility.

    The problem is that the printer will not scan in color, either by using the document feeder, or when I manually load pages.

    In the HP utility, I did:

    1. Select printer

    2. Open option "Scan to Computer".

    3. choose 'scan tasks.

    4. double click on the Document

    And that's where it won't.  I don't have an option called "Mode", although I have a menu drop down called "Presets". Nothing in the Presets called color, but there is something called "Photos, graphics, etc. I changed "Last settings used" presets to this photos... option and clicked 'OK' but it does not save it and it's the last settings used when I re - open the window.

    Any ideas on that? I have screenshots of utility windows saved on Pinterest to and

    New impressive toufik

    I'm glad to hear that the problem is now solved! Thanks for letting me know that you had tried for the troubleshooting steps. Please consider tagging a post here by clicking on the button "Accept as Solution", so others in the community can find our thread too!

    Have a great weekend ahead

  • Color grading workflow question

    Lets say I want to color grade my Final Cut project, should I rank each RAW has clips individually then FCP edit? If you rank each RAW file would not take too much time since I use only a part of the raw clip? or do I have to import this project FCP together, under the leadership, to the rank of sequels? How you color grade each individual clip when after effects recognize your Assembly as a single item?

    Traditionally, the color adjustment is the last step of a project before final delivery.

    The reasons: any other way to train a lot useless AE make time and disk space excessive to store redundant images.

    It IS possible to do as you wish.

    Just make sure you have 1) time and 2) storage to your workflow preferences.

  • Profile of color in InDesign question

    I created a shade using a Pantone color:

    Screen Shot 2013-06-10 at 5.28.31 PM.png

    But in the color Panel, it appears as a color lab:

    Screen Shot 2013-06-10 at 5.28.41 PM.png

    And when I have the mouse on the swatch in the swatches Panel, I see these values in the floating yellow box above the sample that appears on mouseover.

    The ink Manager is not to use the lab for task values:

    Screen Shot 2013-06-10 at 5.35.40 PM.png

    Why InDesign converts the tones of colors lab? In addition, fusion of transparent space is set to CMYK (if it's relevant).

    CS6 8.0.1 on Mac OSX 10.8.4 ID

    Any help would be great.

    Best thing is to try it. Open the PDF in Acrobat and open the output Preview Panel. Your Pantone (s) will be listed if it is present at the bottom of the list.

    Take care, Mike

  • Color/flightcheck newbie question

    I am preparing a 24-page newspaper which is black and white, with the exception of the stain color on pages 1, 24 and 12-13. When I have my final paper flightcheck, is it possible to see if I screwed up and used the color on the pages without color?

    Define a preflight profile that reports it as a black everything except error. You should not get any errors except on pages where you know that the color is OK.

    Your newspaper really print shades? Very few do these days, although they could still call a CMYK mix red spot or blue spot.

  • XY graph multi plot points and color control live

    Hi all

    I'm doing something that should be simple, but difficult so far. I had a good look through previous topics and found similar things, but not really what I want.

    In my experience, I'm scanning intensity vs. wavelength.

    Ideally, I want to be able to:

    (1) scan and see live plotted points.

    (2) then I want the plot to stay on the graph when I run the following analysis, etc.

    (3) I have an arbitrary number of scans. for example to start a scan, I press a button, an arbitrary number of times.

    (4) I want to make sure the current analysis is drawn live in (red), and all the previous analyses are drawn in a different color (blue).

    (5) sometimes I want can erase the graph of all scans and start over, without having to stop the VI.

    Items 1-3 can be supported easily by placing the XY graph building and the XY graphic object inside the loop that runs the scan and uncheck 'clear data on each call' in the properties of graphic generation. See the first VI attached.

    However, at the beginning of an analysis, she joined the last part of the previous analysis up to the first point of the next scan.

    The difficult parts are 4 and 5.

    For article 4, you need to build an array of plots, which is easy if you know the number of plots, but here the number is arbitrary. So, how do I do that? I had a go trying to use Insert table in different ways, but I haven't worked on it. Then if all goes well using the graphics property XY nodes I can adjust the colors of the plots.

    For part 5 is not just enough to use the invoke = node reset by default, and have a button that executes the node. This clears the graphic but then when you run the following analysis all parcels previous pop up once again, indicating that the table that stores the plots is not actually deleted. The second accessory shows how I delete the chart.

    My biggest problem is point 4 and combining point 4 and 5 together.

    Help, please.

    I fixed the problem of the route doubly table and added in the desired color, attached plot.

    The code now done everything I wanted to in my first post.

    No doubt the code could be improved more, but that's for everyone out there who has this problem.

    Thanks to tst for give me useful advice.

  • Question on color background with other objects

    I'm new to this forum and I am very new to illustrator program. I realize that this may be a basic question and stupid it is obvious to most everyone else here but put into perspective my skills. I am doing a project for my base class of graphic design in my community college and I do could be done better by someone in the kindergarten. He looks terrible.

    in any case, I tried to set the background color to a 8.5 x 11 in. project and I know that I can add the background color with a rectangle on the entire space and fill it with a color. My question is how can you put other objects from the background of different color on top a blue (or any color besides)? For example, I put a black circle on the top blue background but it disappears behind the blue, so you can't see the circle. I tried to reduce the opacity of the background blue, but it doesn't look good. I want to be 100% opacity blue. I just need to know how to put things on top of the background color. I'm using CS5 passing.

    Any help would be appreciated. Thank you.

    You have the mode draw behind? If so, change it at the bottom of the tool palette, or press SHIFT D.

  • Graph legend silver color problem (Bug?)

    Must be the end of the week...

    I can't seem to find a way back to the original color of the chart legend money once I have it painted a different color (Figure 2 below, painted 'System'):

    I used the for the main body color picker and the original legend of the chart (they are the same, apparently), but when I use this color choice, no question when I apply it (corner, Center, etc.), I get the weird result shown in Figure 3). What gives?

    I have no problem with modern graphics:

    I enclose the offending VI and the non-offending someone confirm (or not).

    I'm sure there is a way, it seems just too stupid to understand.

    I would say that you do not teach an old horse like me to paint a chart legend differently that it has been used forever...

    This is of course all the stuff of LV 2011.

    I agree it's a bug and it will drop as such, but I also want to explain what is happening.

    Money controls have the background of the text transparent plot value so that you can see the gradient of silver decoration behind it.

    When you colour legend, it changes the colors of foreground and background on the text of the plot, as well as on the framework. How works the silver decoration, these two colours are the endpoints of the gradient, you receive the darker color as the background of the plot.

    I have this set probably by having the paint bucket tool let the background as transparent.

    To establish a chart with this problem, you can use the control editor. By choosing 'Customize' mode, you can select the text of the plot and choose Edition > control to customize to open in another editor to control where you can color.

  • How to ensure that the graph xy plots are present?

    Hello community,

    Since the update to LabVIEW 2014 this week, I have a problem with the code that worked (or didn't, but the problem was unnoticable).

    As example the llb I created to present the question, I'm graphic xy filling with quiete some data and then color programmatically plots.

    The problem is that if there are too many plots then the property nodes that are to color the mistakes of Mr. thow plots as if the corresponding plots were not present in the graph still - even if I used a single flat sequence structure to try to ensure that the data is written in the plot before trying their color.

    Maybe this wouldn't be in LabVIEW 2013 too - but the threshold for the number of plots was higher. All I can say is that I have observed this with data sets that worked well in 2013 of LabVIEW.

    To reproduce simply run 'color of the' with values high enough to 'numerisch' and ' numerisch 2 "(50 on my machine can be more about yours).» I left the terminal nodes property unwired error so you get caught up in the right position when the error occurs.

    Somehow check if all parcels are in the charts again? This way I could introduce a delay that ensures that I don't have the color of the graphics that do not exist yet - regardless of the speed of the target computer.

    Xy graph behavior has changed in 2014 of LabVIEW? Or maybe his performance?

    Best regards


    HM, your addendum somehow answered my question. We are indeed an against the user interface thread race condition.

    Unfortunately, I do not know a method to wait than the UI thread to have access to all plots. In addition, the waiting time that you need depends on the ability of the system, which is dynamic, you know not all processes background or in parallel, running applications.

    That being said, I recommend a work around:

    1. create the data for the plots

    2. how many plots you have in query data

    3 write short dummy data in the terminal, and not the data of the whole plot

    4 Recolor plots

    5. write the correct field data


  • wire color

    Hello, just one question, maybe someone can give me an idea about "best practices".

    Often, in a larger project, I need to use the notifiers, queues, DynamicUserEvent structures. Usually, we go data of cluster through these threads, for communication, data broadcasting, etc...

    What I really hate is that since I use the cluster data, all the threads above has the same color. In a larger project, even if I try to make things as simple as possible, it is very hard to follow which wire is the author of the notification, queue, etc., because they have the same color.

    Question: I understand that, if specify us a data type for an ObtainNotifier VI (or queue, dynamicevent, etc.), the reference wire Gets the color of this type of data. But in my opinion, it would be better to show a difference between the sons of different reference... color, or perhaps shaped?

    Is there a work around to get a more visible block diagram?

    It is not a direct solution to your specific problem. But if you start using LVOOP you the ability to customize the colors of son.

Maybe you are looking for