Image of ESXi 5.5 HP OEM U3A?

Similar Questions

• Cannot find a device supported to write image vmware esxi 4.1.0

  I have a Dell Poweredge R410 (service tag XXJ1FQ1) with a Raid 10 for PERC S300 controllers with 4X250GB drives.

  I downloaded the iso 4.1.0 ESXI and can boot from the DVD, but after agreeing to the terms. The installation program will fail and I get this error:

  «Could not find a device supported to write image VMware ESXI 4.1.0 to.»

  I checked the compatibility Web site: http://partnerweb.vmware.com/comp_guide2/detail.php?deviceCategory=server & productid = 4932 deviceCategory = server & partner = 23 & releases = 24 & keyword = poweredge % 20r410 & systemTypes = 2 & page = 4 & display_interval = 10 & sortColumn = Partner & sortOrder = CSA

  And my system should be OK.

  Has anyone experience this problem? And how to do this?

  Easy.  You cannot use the card s300.

  S300 work only in windows environments.  I also learned that the way lasts.  (Thanks Dell!)

  Pick up a Perc 6 / i and you will be ready to go.

• Images IBM ESXi 4.1 to 5.5 upgrade

  The upgrade to ESXi 4.1 Patch 5 on 30-01 - 2012 Build #582267 with customization of IBM to VMware vSphere Hypervisor (ESXi) 5.5 with customization of IBM for VMware ESXi - 5.5.0 - 1746974-IBM - 20140428.iso image downloaded from the IBM site. When you attempt to upgrade using Update Manager 5.5 receive the following error:

  
  Unsupported configuration:

  Software modules oem-ibmcustomization oem-vmware-esx-drives-net-vxge oem-vmware-esx-drivers-scsi-3w-9xxx vmware-esx drivers-net be2net published by third-party providers are installed on the host computer. The upgrade of the host will remove these modules.
  

  The release notes for State 5.5:

  Migration of third-party Solutions
  You cannot migrate directly from third-party solutions installed on an ESX or ESXi host as part of an upgrade of the host. Architectural changes between 5.1 and 5.5 ESXi ESXi result in the loss of third-party components, and system instability. To perform these migrations, you can create an ISO file personalized with Image Builder. For more information on the upgrade of your third-party host performing all customizations, see the Upgrade vSphere documentation. For more information on the use of Image Generator to make a custom ISO, see vSphere Installation and configurationdocumentation.

  Does it mean that our IBM specific upgrade path is not supported? If so, the need for a new installation and then apply this ESXi host host profile?

  Thank you,-Jeff

  I received the following IBM:

  "As long as no additional VIBs have been added to the current image of VMware ESXi 4.x custom IBM installed on the host server, it is safe to force a migration to custom image 5.x because the VIBs of third parties that have been added to the original image by IBM have equivalents in the custom image ESXi 5.0."

  That said I think that we can proceed with the procedure of forced Migration to upgrade these hosts.

• Impossible to download the iso image 6 ESXi

  Hi all

  I tried to download 6 hypervisor ESXi and vSphere Client on this page: https://my.vmware.com/group/vmware/evalcenter?p=free-esxi6, but somehow the download links do not work.

  I'm connected, I downloaded some older images (5.0) in the past with success, however, now I feel stupid spent several hours with her. I tried 8 different browsers, mostly (but not only) new versions, even in different countries, none has worked so far.

  Can someone give me a hint, please?

  Best regards

  Laszlo

  (from Budapest)

  Recently, I have seen this error with another.

  (1) the problem is with the update of JAVA in its system. Update the JAVA plugin.

  (2) second, you can try with a new id that you download a trial version, it will be download.

  The two resolution exists and works on depending on the case.

• Standard Cisco Custom Image vs ESXi ESXi VMware image

  How the image Cisco Custom ESXi differ from the standard image of VMware ESXi, and how is it important to use Cisco image when the material of the UCS is used to run ESXi?

  It is not a problem in itself. The ISOs of VMware GA come with drivers for real Cisco VMware team has put at their disposal to the release date.

  Cisco made its own assessment of the release of vSphere, and if they determine that an updated driver is needed, they release a.

  The recommended practice is to check the compatibility UCS site to confirm the version numbers of driver that you use depending on your combination of hardware, UCS version and version of vSphere.

• HP Custom Image for ESXi 5.0.0 Update 1 vs VMware provided

  We use models of generation of servers, ProLiant DL HP 5, 6 and 7 to our environment vSphere. Someone at - it experience with the use of the HP device provided ISO vs VMware?

  I've been using VMware images provided and for moving to ESXi 5.0U1, I am trying to determine whether to use images of HP now.

  
  Suggestions, comments, and or PROs or idiots would be greatly appreciated.

  Thank you!

  As others said, the ISO provided HP is very good, but it is in no way a magic requirement. They contain little update driver-VIBs and, in addition, the material management extensions.

  Basically, everything that HP and other hardware vendors are doing with their ISOs custom entering the release of vanilla by VMware, the addition of a few separate packages (material management extensions) and maybe replace some drivers specific with updated versions (as a driver more recent be2net, which is just what VMware offers as an updated driver to separate day on their site anyway). They do not affect the VMware components as esx-base package

  You can also easily build an almost exact copy of HP image yourself, updated or additional drivers and management extensions are all available after all. And of course you can always install management packs and drivers updated in your vanilla install yourself afterwards, through for example Update Manager.

• Restrict access to the images on ESXi

  Is it possible to limit the permissions/access to only certain images?

  We have a group of trainers and I wish they were able to start/stop the images for purposes of training, but there are a couple, they should not be able to touch everything.

  Is this possible at all on the freeware version? Or a full license required?

  Any help is appreciated.

  Hello.

  You can create a new group called "trainers" permission on your ESXi server and limit the rights to these permissions they need, for example start, stop, suspend, Flash, etc. (go to: Home-> management-> roles)

  Then you add your trainers vSphere accounts to the Group and apply these group permissions to VMS / folder with the training VMs. (tab permissions on an object host/vm /)

  Should work with free ESXi license.

  Concerning

• How to get the free license for HP Custom Image for ESXi 5.1.0

  Hi there guys.

  I have HP Proliant DL160 G6 and I installed this: https://my.vmware.com/group/vmware/details?downloadGroup=HP-ESXI-5.1.0U3-GA & productId = 285

  I would like to ask how I can get a free license for this hypervisor?

  My server supports only hypervisor 5.1, but none of the most recent versions, then told me to install the one I posted above.

  This version of the free hypervisor and how do I get the license for this last, or where I can download another more recent free hypervisor can 5.1.0?

  Thanks in advance!

  Unfortunately, you can't have the old version free license... As if you were going to a free version, you can try the latest version and key are available with them. Currently esxi 6.0.

  If you bought the license for 5.1, then you can get the license key. another sound impossible.

• It is absolutely impossible to get a license for HP Custom Image by ESXi 5.1.0 Update 1 Install CD iso download

  As I said on a support call, I just raised.  The funny thing is I have no confidence now and the clock is ticking, assessment expires all too soon.  Does anyone know how to get the free product license please?

  Martin

  To enter the key to license/assign the license to host, do in for example http://kb.vmware.com/kb/2014295. For example "Licensing a stand-alone ESXi host" where the host is not managed by vCenter Server.

  André

• Blue screen when you create a new virtual machine from an acronis image.  ESXi 5.0

  I'm trying to create a virtual machine in my ESXi 5.0, from acronis backup.  The backup is W2003.

  The virtual machine is created, but when it tries to start on W2003, he quickly shows a blue screen for a second or two, then try to restart.

  I suspect that it is a hard disk driver, but I don't know how to correct it.    I couldn't see anything in the Bios of the virtual machine to select type of HD.

  This fixed my issue.

  Glad to hear that it works now. Even if VMware Converter 4.3 works, I would say that you are using the latest version of Converter for future conversions.

  André

  PS: Please consider to mark the question as answer. This could help other users with similar issues.

• How to activate the TOE and large images in ESXi 4.1.0

  I installed ESXi 4.1.0 on a Dell PowerEdge 1950, which was activated on the two unloading TCP/IP network cards.

  How can I make ESX use this feature, or is it 'just do it '?

  In addition, what turning point on great frames?

  If the TOE is supported and enabled on the NETWORK adapter (usually in BIOS) and it's on VMware HCL, then it will automatically make use. You don't need to do anything more, I believe in VI 3.5, there was limited support and I think you might have it turned off. In vSphere, it is enabled by default if your NETWORK card is supported.

  Here is an article from VMware KB detailing information for the different buids - http://kb.vmware.com/kb/1006143

  An easy way to check is to run 'esxcfg-vmknic - l' if 'TSO MSS' parameter is set to 65535 which means it is activated on your NIC

• Recovery DELL ESXi 5.1 image

  Hello

  Nice day. I want to upload a custom Image for ESXi 5.1 DELL as we could find to HP Custom Image for ESXi 5.1 with its OEM for VMware drivers.

  But when I search the support site and found no custom, image driver, but a recovery for ESXi 5.1 image.

  I'm confused with the description written on the download page.

  ISO image that ESXi 5.1 Recovery Image Build # 799733 (A02) should be used only to recover/reinstall the ESXi for SD Card/USB Key image on Dell platforms.

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-R720?driverId=H8X70&osCode=XI51&FILEID=3163313948&LanguageCode=en

  So is this the personalized Image of DELL for ESXi 5.1 I was looking for or just a picture for the recovery of card SD/USB Key?

  Thank you if someone could give me a hint.

  I'm considered pretty new to install VMware on DELL server.

  Eddy,

  This is the image of installation for the SD and the readers. The sentence came from previous versions that have been "Embedded" to SD card and the "Installable" for hard disks. This is the ISO image, you will need.

  If you have problems or questions during installation let us know.

  Let me know how it goes.

• Is the PowerEdge R610 Compatible DELL VMware ESXi 5.1 update 1 recovery Image?

  Hi all

  Does anyone know if the R610 is compatible with the recovery Image VMware ESXi 5.1 update 1? It is not on the compatibility list, but the r.620 is there. We use two servers in our VMWare environment and I want to upgrade to 5.1 U1.

  Thanks in advance!

  Lee

  Hi Lee,.

  The long wait has its result.

  Seems that it's a typo. Engineering has responded that it is supported.

  Let me know if you encounter other problems.

• Reference Dell Custom Image for Vmware ESXi 5.1

  Hello

  where can I find the custom image Dell for ESXi 5.1.

  I can only find the ISO Images for 5.0 (4.1). But none for 5.1. Unfortunately the original ISO Vmware image will not work because it does not find a NETWORK card in my Dell R420. Which seems to occur as long as the original image from Vmware does not include the card driver NETWORK Dell to the R420.

  I saw that today there is a download section at support.Dell.com for ESXi 5.1 with about 36 files to download. But no ISO Image for ESXi 5.1 as it is 5.0 and before.

  Hope someone can help or knows how Dell will bring the custom image.

  Thank you!

  Here is the link to the ISO image of the ESXi 5.1 custom newly released Dell. Sorry for the delay to everyone - out www.dell.com/.../poweredge-r620

• Find drivers for Qloqic 825 in my ESXi 6

  Hello!

  IM struggling to get the version of the driver on my HP gen8. When I run the command vmkload_mod s bfa | grep version or for a $ in (esxcfg-scsidevs - a | awk '{print $2}'); do s $a vmkload_mod | grep-i version; done I get only a blank line and no info is displayed. If I run vmkload_mod s bfa , I get this (see it below) information about the drivers here somewhere. Qlogic firmware I see 3.2.5.0

  vmkload_mod module information

  input file: / usr/lib/vmware/vmkmod/bfa

  Version: Version 3.2.5.0, build: 1331820, Interface: 9.2 built: Sep 29 2014

  License: GPL

  Required namespaces:

  com.vmware.driverAPI #9.2.2.0

  com VMware.vmkapi #v2_2_0_0

  Parameters:

  heap_max: int

  Size maximum achievable bunch for the driver.

  heap_initial: int

  The initial heap size allocated for the pilot.

  vmklnx_multiq: int

  To save multiple queues storage io with vmkernel. default = 1, row [disable: 0: enable: 1]

  max_rport_logins: int

  Maximum number of connections to the initiator and the target rports on a (physical/logical) port, default = 1024

  max_xfer_size: int

  default = 32 MB, range [64 k | 128 k | 256 k | 512 k | k 1024: 2048 k]

  pcie_max_read_reqsz: int

  PCIe max read request size, default = 0 (use the system setting), range [128 | 256 | 512 | 1024 | 2048 | 4096]

  fdmi_enable: int

  Active recording fdmi, default = 1, row [false: 0 | true: 1]

  msix_disable_ct: int

  Disable the reported Message interrupts if possible for QLogic-1010/1020/804/1007/1741 cards, default = 0, range [false: 0 | true: 1]

  msix_disable_cb: int

  Disable the Message reported interrupts for QLogic-415/425/815/825 cards, default = 0, range [false: 0 | true: 1]

  linkup_delay: int

  Connect the delay, default = 30 seconds for the starting port. Otherwise dry 10 rank in RHEL4 & 0 for [RHEL5, SLES10, ESX40] [> 0]

  ioc_auto_recover: int

  Automatic recovery of IOC, default = 1, row [stop: 0 | on: 1]

  LOG_LEVEL: int

  Driver log level, default = 3, row [criticism: 1 |] Error: 2 | WARNING: 3 | [Info: 4]

  bfa_io_max_sge: int

  Items of ventilation/grouping of io, by default Max = 255

  bfa_lun_queue_depth: int

  LUN queue depth, default = 32, row [> 0]

  rport_del_timeout: int

  Rport remove timeout, default = 90 seconds, range [> 0]

  num_sgpgs: int

  Number of ventilation/grouping pages, default = 2048

  rspq_size: int

  Maximum response queue items, default = 64

  reqq_size: int

  Maximum number of items in request queue, default = 256

  num_ufbufs: int

  Number framebuffers requested, by default max = 64

  num_fcxps: int

  Number max of fcxp please, default = 64

  num_tms: int

  Number max of task im pray, default = 128

  num_tios: int

  Number max of fwtio please, default = 0

  num_ioims: int

  Number max of ioim please, default = 2000

  num_rports: int

  Maximum rports supported by port (Physics/logic), default = 1024

  Host_name: Chernobyl

  Host name of the computer host hba

  os_patch: Chernobyl

  The operating system of the host hba patch level

  OS_name: Chernobyl

  Name of the OS of the host hba

  Hello

  "3.2.5.0 - 1OEM.550.0.0.1331820, QLogic, VMwareCertified 2015-11-11" is the version of the driver in use...

  This is the latest version of the driver available in HP custom image for ESXi release 6.0U1, see:

  https://my.VMware.com/group/VMware/details?downloadGroup=OEM-ESXI60U1B-HPE&ProductID=491