IMAQ copy error

Similar Questions

• Get copy errors whenever he asks the XP CD

  When I did a repair installation I got many errors of copy, but I made another with a freshly burned disc and this time only had a copy ICWCONN1 error. Ex_ or ICWCONN2. Ex_, one of the two.

  I have many components missing so I try to install via appwiz.cpl to install accessories and utilities that are missing, but it retains point out errors of various file copying, files randomly on the CD. I copied the CD to a folder on the HARD drive, but he refused to accept. What is going on? The files are not corrupt.

  The problem is resolved. Secedit.sdb is damaged.

  Running

  Esentutl /p %windir% \security\database\secedit.sdb

  cmd fixed the problem and got ran appwiz.cpl copy error-free. I am really annoyed with the fact that a repair installation has not set this property. In fact, the repair facility has been hampered by errors in copy because of this corrupt file. I hope and pray I made an installation repair is much more efficient on Windows 7.

• Volume shadow copy error after moving to MSATA SSD on R7 - 572

  A while back I cloned the value default 1 TB SATA drive on an MSATA SSD plugged into the slot unit MSATA.

  At the time I had been unable to conceive the MSATA as boot drive, while the original (also bootable drive) was in the system such that it does not appear in the BIOS from startup list.

  http://community.Acer.com/T5/S-and-R-series-laptops/cloned-SSD-in-Boot-Manager-but-not-boot-priority...

  As I did not need the 1 TB, I just removed and have used the system very well with just the MSATA SSD.

  Today, I tried to make an Image of Windows backup system and ran a (below) Volume shadow copy error

  Volume shadow copy service operation failed. (0x807800A1)

  Writer has encountered a transient error... (0x800423F3)

  I check all the main remedy online by ensuring that all VOlume shadow copy served are running, but without success. I feel that the fact that I'm on the SSD MSATA which was not visible in the list of the BIOS boot maybe being tied to the backup crashing.

  Anyone running the R7-572 on the MSATA port that is able to make a system image backup?

  Thanks for your comments

  It took me awhile, but I finally understood what was preventing the creation of the image of the system.

  Looking at the event viewer, he had a lot of mistakes, the first mistake we a CAPI2 with event 513, then it was a VSS error with event ID 8228 stating an invalid character in an XML file.

  Error says:
  Do not parse the XML file.
  Reason, an invalid character was found in text content.
  Line 0x000003c0
  Position 0x000009c8, the file below is damaged.
  0xc00ce508 error code
  Text problem<>

  Search through dozens of threads and try a number of bugs without success, I finally found one who mentioned their question came from bad characters in the names of partition after cloning with EaseUs Todo backup.

  It's the tool that I used to clone my drive to a SSD, I decide to check it out.

  The thread mentioned using GPT fdisk utility found on sourceforge, so I downloaded the tool.

  You just run the executable in administrator mode. Find how to use it was a little hard, but basically the commands below does the job

  0:-enabled disk 0, which is my drive.

  I - to view the information on each partition

  It will ask you the number. This allows you to see the names. Some of my partitions had some very strange names did not, we had a quote.

  I checked what names when used on another laptop and decided to appoint mine as follows (I think you can use any name)

  first 600 MB partion: database partition

  Second partition of 300 MB: EFI system partition

  Thrid 128 MB partion: Microsoft Reserved partition

  Fourth 205GB partition: partition database

  Fifth 17 GB partition: partition recovery

  To change the name of the partition, use the command

  c ask for the number of the partition, then the name

  Then save with

  w - written revisions and outputs

  I rebooted, tried the system image backup and no problem this time.

  I lost a full day on this topic, so I hope it can help someone else in the future

• iWeb domain.sites2 fails to copy. error - 36

  New computer. migrate all files and applications. Google on the transfer of the domain.sites2. Problem is I can't copy it to usb as (translated from the Dutch by myself): Finder can't complete because some data in "Doman.Sites2" cannot be read or written (error code - 36).

  I changed the settings for authorization using the command - I and going to "read and write". It does not work. Anyone out there?

  First of all the zIp file. It is safer. Use this application for ease of use:

  http://wyodor.byethost8.com/iwebsites/iWebSites.html

• IMAQ.dll error when starting Windows

  Hello

  I have a little problem with Labview 8.6. After you have installed the driverpack for the dvd, my windows give my error

  Der Prozedureinsprungpunkt wurde in DLL "IMAQ.dll" non found "ProgramFPGAs".

  My tranzlation

  the "ProgramFPGAs" entry point is not found in the Dll "Imaq.dll.

  LabVIEW start racing without problem, only this message at windows start is boring.

  someone has an idea to solve the problem or at least stop that messagebox

  Thank you

  Hi DRhatje.

  Hello and I hope that your well today. Thanks for your post.

  I think it's a pretty good translation, the error message I thought lie in the below knowledge base article.

  The cause suggested for the error is that the IMAQ.exe is defined (by default) to boot at startup. But if you don't have a capture framer installed on the machine card then we could well see this error. The solution is to delete the exe file of the list on your system. The steps to do this is listed in the link below, but in short.

  Section in the screenshot you sent me, you should be able to select the "selective startup", then go to the "Startup" tab and uncheck the IMAQBoot.exe.
  If this restores the default settings on reboot, it's probably an indicator that your administrator rights on this PC are limited.
  I think that a quick way to check is to go to start > run and type "regedit". It is essentially a more advanced method to handle similar settings, but if you do not have Admin on the PC rights then you would most likely be denied access. In all cases, ask one of your colleagues in COMPUTING to use their passwords and change this setting. It will get rid of this warning you are seeing until you start to use our materials of industrial Vision and need to reactivate it.

  Make sure you click on 'Apply' before leaving this utility.

  Why do I get "IMAQBoot.exe - Entry Point not found" error when I restart computer?

  http://digital.NI.com/public.nsf/allkb/AD70B1036D5B950B8625752400578CFE?OpenDocument

  This should at least remove the error message when starting upwards.

  Please let me know how you and I hope this helps!

• Windows XP Service Pack 3 copy error: can't copy the file osloader.ntd_

  Whenever I try to install Service Pack 3, I always get an error of copy that it cannot copy the osloader.ntd file. I have no idea what this file is located, or if it's still on my computer.  Any help is appreciated. Thank you.

  WinXP SP1 or SP2 is currently installed?

  Windows XP installed on a Mac & installed Boot Camp 3.0? See http://support.apple.com/kb/HT3841

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Copy error troubleshooting

  I have two PCs.  1 XP PRO and 2. Windows 2000 server...   Here the glimpse.  I have an application on XP PC which basically regularly free I mean TIF to Windows 2000 server images... basically copy for say D:\images W2K Server folder.  Now, W2K server is a utility that search image sub-folder D:\images basically and treaty files those.  If the utility cannot find the files, and then it generates the error.

  Here's what I got.  The utility on W2K server has been generating errors frequently because it cannot find the files.  According to the application on the XP machine logs, files have been generated.  Now, I don't know whether or not they were ACTUALLY copied on W2K server.  Y at - it a utility out there that may know if the files were present at all on the W2K Server or were actually copied from XP machine?

  This is a random question so I can't see and monitor because it may or may not happen.

  Suggestions, hint or direction would be greatly appreciated.

  Hello

  Your Windows 2000 issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum.  You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Hope this information helps.

• large file copy error: specified network is no longer available

  Hi, I can not copy the files from large as data 1 GB, 2 GB or so on my network xp but I can copy files of 100 MB to 50 MB with no problems, I got an error, can not copy the file, or the specified network folder is no longer available or some trail time is too deep (in the case that a single file is available on the root)

  Hello

  • What were the changes made before the show?

  You can view the steps that are provided in this link:

  Advanced Troubleshooting for Windows workstations network card

  http://support.Microsoft.com/kb/325487

  Also see this article to update the network adapter drivers:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• HP6700 "Failed to copy" error message

  I have a HP Officejet 6700 Premium that returns an error message "Unable to scan, copy or send a fax."  The printer function works very well!  My current problem of production is the copy, as the functions scan and/or fax are n ot relevant to my current location/setting.

  Originally, I sent the printer to work communicate via wifi, but it is currently connected via cable to my laptop Dell Inspiron E1705.  The operating system is XP.

  Thanks in advance for any help on this issue.

  Hello

  Follow the steps below to resolve this issue:

  http://support.HP.com/us-en/document/c03672603

  If the problem persists, follow the steps below to contact HP support for service unit:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Shlomi

• copy error: error 0 * 8007045D: the request could not be performed because of an i/o device error

  When copying the files, I get this error which is lower than
  an unexpected error prevents the operation.make a note of this error code, which might be useful if you get additional help to resolve this problem:
  error 0 * 8007045D: the request could not be performed because of an i/o device error
  filename DSc02828
  file type jpg
  size 3.27 mb
  updated the 09.11.2012
  try to jump again cancel
  Whats wrong here

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. don't you make changes on the computer before the show?
  2. where exactly you are trying to copy the file?

  Run check disk on the computer.
  a. click Start , and then typecmd.exe in the start search and then press ENTER.
  b. right-click on cmd.exe and clickrun as administrator.
  (c) in the command prompt, type the following command and press ENTER.
  Chkdsk /f
  Note: You may be prompted by a yes / no question. TypeYes and press ENTER.
  d. restart the computer so that the disk check starts. It will take about half an hour to complete the process of error checking. Do not restart the computer when the current disk check.
  Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  
  Summary the link:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272

  Just reply with the results. I'd be happy to help you further.

• HP Deskjet 1050: HP Deskjet 1050 print, scan, copy error

  Bula sir / maam,.

  It comes from Fiji,

  We used the HP Deskjet 1050 since 2010 until yesterday (25/11/2015), now (26/11/2015) is not printing, copying or scanning.

  Yesterday, I cleaned the bottom of the prnter (printer side), then all of the ink came out almost everywhere. Cleaned, changed (new) the two cylinders and it worked well.

  This morning all the printer lights are flashing (low in ink & so the witness of the paper). Could ' t print, photocopy or scan anything. When I opened the front of the printer check ink, the slotter of ink is not to stop in the Middle than usuall.

  When you try to SNA off-line the following note appears.

  

  Kindly need your advice on what I can do to solve this problem.

  Vinaka...

  Hi @Sevanaia in Fiji! I'd love to help you with your Deskjet 1050.

  Looks like you have had to face some problems all at once. Performing printing and Scan doctor could help. HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source: try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find that the key and the box are both in a green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

• If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

• If you see a red X (), follow the onscreen instructions to fix the problem.

Thanks, I look forward to hearing back on your part.

• File copy error

  Hello

  Today, I tried to copy a video file from one hard disk to another, but a message keeps appearing telling me that there is an error code 0 x 80070057, the parameter is incorrect!

  Have no idea what to do with this error so I decided to ask someone here and get the answer on what should I do to fix this error...

  Thanks in advance...

  Hello.

  Thanks for posting. Let us help you with that.

  The error you get is often caused by parameters incorrect configured system.

  You can run sfc to check what caused the error: Guide to perform sfc/scannow.

  And perform a clean boot: How to perform the clean boot.

  Let us know if you need more assistance.

  Kind regards

  If you find this useful, feel free to mark this answer.

• Unable to backup because of the volume shadow copy error 0 x 80042302

  Hi all

  I'm trying to backup to an external hard drive and I keep getting the error 0 x 80042302. It is said that "a volume shadow copy service has met an unexpected error.check the applications for more information event log"
  I did what the other threads have said services and shall ensure that the shadow copy service and the service backup Windows are automatic and started but still nothing. I also ran a check with run with the/scannow command but nothing... I really need help everything would be appreciated.

  Hey kiran thanks a lot.

  I talked to my uncle today who knows a little about the PC and he said that it maybe the tune up utilities that could be the problem. with some services that it turns off, it may have caused a problem. I uninstalled it but still nothing... so I watched your first suggestion that was the very audience who gave a more detailed error code. I then googled that error code that led me to believe that there is another service "Microsoft Software Shadow Copy provider (SWPRV)" which I had not enabled and once I did here! its market so now my message would simply be that you should be careful with programs that take control of the pc! Thank you very much!

• Upgrading ISE file copy error

  According to the upgrade to 1.2:

  Copy the Upgrade Pack towards the local disk using the copy of the ISE Cisco's CLI command: disk of ise-upgradebundle - 1.1.x - to-1.2.0.899.i386.tar.gz copyftp-filepath: / again, after copying the package to upgrade to the local drive, check that the size of the package upgrade from your local disk is the same as it is in the repository. Use the dir command to check the size of the entire upgrade in the local drive.

  When I try to run this command, I get the error message:

  ' % long command detected at ' ^ "marker".

  using the following command:

  ' copy the repository FTPDPZ ise-patchbundle - 1.2.0.899 - 1 - 82500.x86_64.tar.gz.

  I also tried to replace the repository + name with an IP address, with just the name of the repository and 100 other things.

  I tried to look at until a 'long command' is, but I come up with nothing.

  What is the good verbage to use this command?

  Hey David,

  It seems that you have been a little too long watching it, and accidentally hurt interpreted the guide! The "copy" command uses no configuration repositories currently in the running-config, so you must type it out as follows

  copy [email protected] / * //ise-patchbundle.etc.etc.etc.tar.gz drive: \.

  When you type out, there are more arguments to the command he knows he has to manage, then it throws the error '' long command. ''

  1               2               3                                                      4                                                            5

  copy of repository disk FTPDPZ ise-patchbundle - 1.2.0.899 - 1 - 82500.x86_64.tar.gz:.

  vs

  1                                                                     2                                                                                 3

  copy [email protected] / * /\ise-patchbundle.etc.etc.etc.tar.gz drive: \.

• FirstSiteII copy - error display page content after page edition

  Hello

  I made a copy of the site of FirstSiteII using the copy of Site Launcher. The copy is completed successfully and I can browse throw the copy of the site.

  But when I change the home page or any other page (just click edit and save, no modification), webcenter sites cease to make the content of the page and begin to appear, in sites.log, the following error message:

  [2013-07-26 13:30:34, 079 WEST] [ERROR] [.kernel. [Default (self-adjusting)'] [logging.cs.xcelerate.template] com.fatwire.insite.exceptions.RenderingException: invalid value for tNom: null

  [2013-07-26 13:30:34, 082 WEST] [ERROR] [.kernel. [Default (self-adjusting)'] [logging.cs.xcelerate.template] Impossible to visit pagelet. One or more required arguments are missing: tNom on behalf of page: FirstSiteCopy/FScopyLayout

  [2013-07-26 13:30:34, 090 WEST] [ERROR] [.kernel. [Default (self-adjusting)'] [logging.cs.xcelerate.template] com.fatwire.insite.exceptions.RenderingException: invalid value for tNom: null

  [2013-07-26 13:30:34, 090 WEST] [ERROR] [.kernel. [Default (self-adjusting)'] [logging.cs.xcelerate.template] Impossible to visit pagelet. One or more required arguments are missing: tNom on behalf of page: FirstSiteCopy/FScopyLayout

  Can someone help me?

  Thank you.

  Hello

  I think it is because how the models mapping values are currently being sought.

  You will get more information on this with com.fatwire.logging.cs.xcelerate.tempate active DEBUGGING record.

  For example, if the prefix of my copied FirstSiteII has the value "CCopied" with cs.xcelerate.template active DEBUG I would see the following:

  "

  [2013-07-29 14:58:04, 826 UTC] [DEBUG] [http-8080-31] [logging.cs.xcelerate.template] recovery mapped value belonging to the pattern match [1351276333839] site [1351276330907] [CCopiedHomeSideNavView] [x] key

  [2013-07-29 14:58:04, 826 UTC] [DEBUG] [http-8080-31] [logging.cs.xcelerate.template] trying to locate the card value of the site [1351276330907], [CCopiedHomeSideNavView] - key...  No matches found.

  [2013-07-29 14:58:04, 826 UTC] [ERROR] [http-8080-31] [logging.cs.xcelerate.template] com.fatwire.insite.exceptions.RenderingException: invalid value for tNom: null

  [2013-07-29 14:58:04, 826 UTC] [ERROR] [http-8080-31] [logging.cs.xcelerate.template] Impossible to visit pagelet. One or more required arguments are missing: tNom on behalf of page: CCopiedFSII/CCopiedLayout

  ...

  [2013-07-29 14:58:04, 828 UTC] [DEBUG] [http-8080-31] [logging.cs.xcelerate.template] recovery mapped value belonging to the pattern match [1351276333823] site [1351276330907] [CCopiedHomeDetailView] [x] key

  [2013-07-29 14:58:04, 828 UTC] [DEBUG] [http-8080-31] [logging.cs.xcelerate.template] trying to locate the card value of the site [1351276330907], [CCopiedHomeDetailView] - key...  No matches found.

  [2013-07-29 14:58:04, 828 UTC] [ERROR] [http-8080-31] [logging.cs.xcelerate.template] com.fatwire.insite.exceptions.RenderingException: invalid value for tNom: null

  [2013-07-29 14:58:04, 828 UTC] [ERROR] [http-8080-31] [logging.cs.xcelerate.template] Impossible to visit pagelet. One or more required arguments are missing: tNom on behalf of page: CCopiedFSII/CCopiedLayout

  "

  Errors are happening because the names of key to mapping - CCopiedHomeSideNavView and CCopiedHomeDetailView - was not found.

  These keys have been sought in the following models:

  Model: 1351276333839 (Page/CCopiedSideNav):

  Model: 1351276333823 (Page/CCopiedDetail):

  See how he's looking for the key by adding the subtype of the model name page.

  Note that after the site of adaptation, the subtypes are also preceded by "CCopied", for example Home-> CCopiedHome.

  However, if you look at the section of mapping of the above models, the keys are not preceded by "CCopied". This is why WCS has not been able to search for the keys of the mapping.

  What you could do is-

  1 change the key value in the render tag: search to look for existing keys

  2 or change the name of the key by prefixing them with your own prefix in the Map section for models in question.

  Note that when you browse the pages of the copied site, you could get similar errors for other mapping keys and you have to fix as well.