IMAQ Overlay oval shown do not

Similar Questions

• IMAQ overlay Text.vi: 'police user-specified' ignored

  I try to use "IMAQ Overlay Text.vi' use draw width fixed tag on an image. In my testing so far, I can't determine how to use another font, but the default value. The choice of "fonts specified by the user" seems to ignore my requests for fonts, but use my size and parameters "BOLD".

  

  What I've tried so far:

  • Use LabVIEW to tell me the names of police via the application and then drop type one word for word in the component 'font name' of the pole "font of the specified user.
  • Use a different program Windows (like Write.exe) to give me the names of fonts and then typing a in verbatim as before.
  • Use a font of nonsense name to cause some sort of error "font not found", but none have been raised.

  This third data point makes me think that a default font is selected if the user is not. How can I learn which names of fonts will use this VI? LabVIEW can see and use the font that I want, but not IMAQ :-(

  I have 2009 LabVIEW with Vision Development Module of 2012.

  Check the built in example... This works.

• Anyway to adjust the weight of a Coverstitch IMAQ and IMAQ Overlay line?

  Is it possible to adjust the weight of a Point of recovery IMAQ?  I find it odd that this is not an option.

  If you mean you want a greater 'dot' or more online, as it takes a bit of work, because this option is not built on the.

  Instead of using the overlay point, use the the oval, then you can set the RADIUS want. or you can draw two lines (one vertical and one horizontal) crossing the coordinates of your point.

  I know... It's a bit tedious, but that's all I have in stock.

• IMAQ Overlay - more uniform than the image sensor

  Hi, I have a certain problem that could be more aesthetic than problematic.

  IMAQdx Grab runs in a loop, acquisition of the images in real time, which are then treated in this loop, and finally some calculated the points are superimposed on the image. The last thing I've done in this loop is to send the picture to overlay to an image of front control, so that the user can see the results superimposed on the image in real time.

  However, the image is mainly image appears without results superimposed so they appear only once in a while, very "flickery,". However, the results are well calculated for each image. If I use a probe to look at the purple image wire just before moving the witness in the block diagram, the probe constantly displays the lines superimposed flicker.

  I hope that I was a semi-claire, or see the attached picture. Does anyone have any idea why this might be?

  Thanks in advance

  Where did you clear collection to remove the previous measures? It is best to place before new overlay to labview more time to show.

  Maybe I'm wrong, but indicator can be only one command to display image and design occurs in the separate thread later.

  And probe creates the copy of the image data when it is called and did not progress until she's copying finishes. I prefer to do it manually with image: have a separate image display buffer (Create image.vi) and copy after all treatments and overlay is made (copy image.vi).

• Save to PNG using IMAQ file write file does not save good Gray Scale

  Hi - I have a simple VI which reads a raw U16 file and then try to save the option IMAQ write PNG file (because I want the 16-bit format).

  I defined a custom color table which is just opposite of gray, and this is applied to the image.

  The Image displays properly, but saves the PNG file with non-inverted grayscale.

  U16 RAW file is titled "Martha 1849-02-001-6 - view0000_raw_grey_16bit.raw' and sent to ftp://ftp.ni.com/incoming. "

  How is it and how do we get this working correctly?

  Thank you

  Don

  DonRoth wrote:

  I defined a custom color table which is just opposite of gray, and this is applied to the image.

  No! your custom color table to display the images, not apply to the image.

  In additional, it cannot save the palette as well as the 16-bit image. The pallet can be stored with 8-bit 'indexed' image.

  What you can do - if you need just reverse gray, use IMAQ opposite to calculate the negative value of an image.

  Andrey.

• Overlay adjustment brush works not

  Probably miss me something so fundamental that it'll be awkward... but...

  I recently reinstalled LR 5 to see if that would do anything about the performance of the unbearable. It seemed to work normally for a while, but now when I use the adjustment brush and press O to see the adjustment brush so I can see what was painted red (and therefore subject to changes of setting), it does not display the overlay. It seems to make the changes, but without seeing the areas that I'm trying to 'paint', I can't be sure.

  I do not have the overlay has red color, and I tried to hit H to turn on with out masking. It's maddening. It's something simple I did break LR?

  (Using the most recent version on a Mac).

  The area at the Middle/top of the child's background hand is painted in the attached screenshot. And as you can see, the superposition of the display is selected. But nothing appears. I don't have to reset all the instruments and presets to default settings. (Or at least I tried definitely).

  

  Thanks for your help!

  John

  You have your FLOW set to 50 and DENSITY fixed about 10 so your overlay will be barely visible.  With the color of RED coating, it will be a light pink with these settings, which is about the color on the hands.

• IMAQ Vision: The image is not big enough for the operation (Imaq WriteToPNG.vi)

  Hi all

  I was stuck for a few days trying to get my work VI and get this error. It is as simple as to save a graph of intensity as an IMG, he works with JPEG formats but my graph is U16 grayscale and it is not supported by the jpeg format so I didn't get the expected results. Then I went to the PNG format and the error "the image is not big enough for that operation" appeared. I tried to resize as aid error NOR suggest, and got the same error, anyone has an idea on what could be the problem?

  Hello Bob,

  Thanks for the tips, I'll post my code in future issues (since I already solved this one). As you say, there was something wrong with my code, the code in the image actually worked well, but doesn't have the part where I wrote to the variable (the variable was not being written if its value is an array of 0x0, not big enough actually). Thank you!

• Keyboard virtual blackBerry 10 to enter the password of the device on Z30 sometimes shown, sometimes not

  I implemented a simple device on my Z30 password. When I unlock it after 10 minutes of waiting, it prompts you to enter the password for the device. However, sometimes it shows the keyboard on the digital screen, sometimes it displays no keyboard at all. I'm not able to determine a specific scenario. It's like randomly with distribution of 70-30%.

  In the latter case, I click in the password field to get the point and the keyboard will be displayed. Or double shot from below to display the keyboard.

  It is in any case, no biggie. However, when this happens it requires completely unnecessary move start.

  Since the upgrade to 10.3.2.2474 this clearly resolved. Virtual keyboard opens each time.

• CS6 InDesign overlay Panel options are not available

  I am an experienced Adobe DPS designer and use "Classic" DPS because it was in beta.

  Just upgraded my Mac Pro to El Capitan (10.11.5) and now the Panel inlays in InDesign CS6 offers all the options when a setting is selected.

  

  This is true for all types of coating.

  I uninstalled CS6 and reinstalled, updated, remove the preferences. Nothing helps so far.

  Fortunately the Panel works great on a second computer (Macbook Pro), which also has been recently updated to El Capitan.

  A previous post suggests reinstalling the toolset of DPS. But my impression is that these are updated through Creative Cloud now and am not sure that install them separately now are a good idea.

  Anyone have any ideas? Thanks in advance...

  Transferred to DPS forum.

  CS6 is unsupported under El Capitan. It was reported several inconveniences to crashes.

  If not help not trashing prefs, restore your previous operating system.

• Overlay track CS4 does not

  Hello

  I'm under Premiere Pro CS4 (v 4.0.0) on Vista, but the overlay cache track doesn't seem to work.

  I tried to use an image for the mast, tried all kinds of files like jpg, transparent png and tif formats but never effect will eventually be applied to the video I want to hide, both before or after playback of the sequence.

  I'd love any help that you can give, I've been madly searching for a solution to the problem for the last two hours and I'm close to tears.

  Thank you!

  4.2.1 update a lot of bugs have been fixed.

• Plugins VST and VSTi all shown as not supported

  Hello

  I recently bought Adobe Audition 3.0 for my PC at home.

  Everything works fine, but for some reason, all the VST or VSTi plugins I add end in ' effects/not supported. "

  The same thing happens with the 3 plugins VSTi provided with the installation of the hearing.  (Soundfont Polysynth drive, low dropper Syn)

  I made sure that everything was good in plugin Manager / directories.

  I am running Windows 7 64 bit home, would be part of the problem?

  I do a Internet search for answers and could not find, so I decided to just ask.

  Any help would be greatly appreciated

  Thank you

  Maybe a silly question, but...

  .. .with VSTi plugins, you ARE looking in with a MIDI track open multitrack view, aren't you?  I rarely if ever use VSTi, but happened yesterday to notice that plugins VSTi you mention are displayed in form not supported for me too - when I look at the menu effects in edit view.

  However, when I open a MIDI in MT track see (and scan plug ins for the first time it) they appear and work fine.

  Bob

• My iphone fell into my hands, then wifi signals don't are not showning and not connected is also devices displaying and performing not also what should I do please answer quickly

  Please answer soon

  Hello

  An appointment on apple store or contact support.apple.com

  See you soon

  Brian

• Photos shown do not

  Last week, I bought a Apple Watch. It is under 2.1. My iPhone 6 is running iOS 9.2.1.

  Apple Watch has been configured to display the last 100 photos in my favorite album. He showed stains about 30 70 or so, with the last appearing as grey areas. Equivalent of Apple Watch of the speed rotation or rotation range balls also appears.

  To try to solve the problem, I increased from 100 to 250 photos. Yet, the last 30 or more appear as gray boxes and the icon keeps spinning.

  Any idea how I can get the last 30 pictures appear on my Apple Watch? Thank you!

  HI - try the following steps:

  Make sure that Bluetooth and Wi - Fi are enabled on your iPhone: settings > Bluetooth settings > Wi - Fi.

  Make sure that your watch is connected to your iPhone:

  -By the time display, slide up on the dial of the watch, then swipe left/right to the gaze of parameters.

  -Check that your watch shows connected and shows a picture of a green phone as a status icon.

  -Turn off the airplane Mode if active (press airplane Mode to enable / disable).

  -Slide down again once to exit the looks.

  Restart your iPhone and your Apple Watch. Turn both devices off first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.

  -To reactivate: press and hold the side button until you see the Apple logo.

  Let your photo album to synchronize before checking again.

• My nokia c7 when connect you to the laptop using bluetooth shown driver not found. what the devil?

  Help me...

  Hi Shahrul Nizam,

  In general, there is a demand that phone provider needs to have installed to connect the phone to work.

  Have you got the latest software and drivers for Nokia?

  I would recommend that you contact Nokia on this to see what they have to say.

  In addition, consider the following bluetooth resources:

  Add a Bluetooth device to your computer:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

• IMAQ Rectangle overlay problem

  Hello

  I'm trying to superimpose Roteted rectangle and fill inside.

  I can't do it by IMAQ Overlay Rectangle - it does not accept the rotations

  So I have PV Restangle of KING and I use IMAQ Overlay KING but now I have no fill option

  You know the way to get around this?

  Dear Pawhan!

  As far as I know, you can have overlays of Rectangle rotated in Vision Assistant, you can create a to GO and create a LabVIEW VI from there. If you want to stick with the Vision of LV, try this code:

  

  Please tell me if it works for you.

  Best regards:

  Andrew Valko

  NOR Hungary