Keyboard virtual blackBerry 10 to enter the password of the device on Z30 sometimes shown, sometimes not

Similar Questions

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• Product key: when I enter the product key, it says that its not OK. What can I do about it?

  When I enter the product key it says that its not OK. What can I do about it?

  What is c?

  It's a way to activate Windows.
  Here is an example: http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx Itknowledge24.com

• The computer seems to be configured correctly, the device or resource (DNS server) does not

  When I tried to fix this using other threads, none worked any other suggestions?

  Original title: your computer seems to be configured correctly, but the device or resource (DNS server) is not responding. I tried all of the solutions none works

  Hello

   
  
  This problem is limited to a specific Web site or with everyone?
   

  You can approach this problem in two ways: first by simply disabling the cache, but also by restarting DNS client service, which manages the cached DNS queries.

  
   
  Method 1: Clear DNS Cache

  a. click Startand type cmd in the Start search box.

  b. right click on cmd in the list programs, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. at the command prompt, type the following line and press ENTER:

  ipconfig/flushdns

  Usually, it clears up any issue that may occur.

  
   
  Method 2: Restart the Service DNS Services

  a. Click Start and run, type services.msc, and then click OK.

  b. double-click the DNS Client service. If you receive a Configuration Manager message, click OK.

  c. in the Startup Type list, click on restart and then click OK.

  d. close Services.
  
  e. restart the computer.

  
   
  Method 3: Configure the connection to obtain an IP address automatically

  a. click on 'Start', enter "NCPA. CPL' (without the quotes) in the search bar and press "Enter."

  b. right-click on the network connection, and then click on 'Properties'. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click on select 'Internet Version 6 (TCP/IPv6) Protocol' and then click 'Properties' of .
  
  d. Select "obtain an IP automatically" and "DNS server automatically get an address.

  e. click 'OK'.

  f. highlight "Protocol Version 4 (TCP/IPv4) Internet" and click on "Properties". "" "

  g. Select "obtain an IP automatically" and "DNS server automatically get an address.

  h. click on 'OK'.

  i. restart the computer.

  See also:

  Why I can't connect to the Internet? http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• the device has been disconnected or is not available

  I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.

  Help, please!

  Currently, my version of the MacBook has been OS X 1 10.11.4

  its MacBook Pro OS X 10.11.4

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Satellite P750 keyboard won't let me enter the key 1 or 6

  Hi people,
  Hope someone can help me.

  My keyboard has developed a problem and won't let me enter the key 1 or 6.
  All the others work fine. This random enjoy error at first, but now seems to be like that all the time. I did a system restore, but that did not help. I am running Windows 7.

  Any suggestions, help will be appreciated.
  See you soon
  Rob
  It's a PSAY3A - 02J001 Satellite P750

  I guess that your keyboard is faulty. That would explain the problem. Only for test purposes, connect an external USB keyboard and check how it works.
  If everything works correctly, the keyboard controller is OK and it is certainly a problem of internal keyboard.
  In this case only the replacement keyboard help.
  Where the guarantee is valid, I would recommend contacting a sine of Toshiba ASP this would be fixed for free.

  Dude good luck.

• My BlackBerry Q10 Q10 BlackBerry was stolen. The device password is safe?

  Hello world

  Today, someone stole my phone while I was on the train.

  I have locked my beloved BBQ10 with a password via BlackBerry Protect, disabled my SIM card... and oops. I can't send any new order because my sim card no longer works. I've seen on forums that my operator cannot reactivate the SIM card (I hope he can, I'll make a phone call tomorrow).

  I have ALL my files, accounts of messaging, photos and notes on this phone. I already changed the password of my email accounts, etc... But I'm worried about the stuff I have inside this phone.

  My phone is safe, even with a password?

  It is said that the next time that my BBQ10 will be connected to the network, my device will be wiped. But friends tells me that the password will not lock my phone too long. I'm a little afraid.

  Thank you.

  Your data are safe, once the thief or whoever it is, try the tenth incorrect password entry, the unit will immediately and automatically, in a wipe of security data, the personal information, contacts, etc. Map of the media is NOT wiped off, the memory of the device.

• BlackBerry 10 directly enter the operating mode

  HY all

  Knows anybode here, if I can directly enter the Mode of operation to 10.3 BB? Now, I need to pass manually each time in work mode. Wehen I unlock the phone, I find myself in personal mode. It's not really a lot of work, but not on my nerves...

  aplboy

  Hi @aplboy

  An option to automatically switch to the run mode when the device unlocking is not possible at the moment.

  Since then, it the case, I'll pass along your comments for further review.

  Thank you!

• Passport of the Blackberry link Switch of the Device VS blackBerry

  As I make my way data Iphone6 to my passport for Blackberry, I used the switch of the device and Device link (on my Mac Book Pro) to get my data on my passport for Blackberry.  I used the link for all other than the photos and the video data (I used Switch Device only because I couldn't get the video photo SNA to load).  It seems to me that the two methods is suppose to work.  The switch treats took about 6 hours to load my photos and video.

  Question:

  What is the consensus for what you feel is the most quick and effective way to transfer data from my Blackberry passport for the new edition of the money that comes to me today?  Maybe 10 BlackBerry Blackberry 10 may be easier?

  As always, thanks for your help

  I installed my Z30 to a new Z30 with link and it was easy. has taken an hour with al lmy apps on it.

  I removed the card SD before making like that would be time-consuming to carry 60 GB of data on USB

• Smartphones blackBerry how to reinstall the device att v4.5 software.

  I want to use the Korean fonts, but att did not have so I just download and installed

  but my phone had connection problems (usually, cell phone is not 'edge' and I couldn't use IM +..)

  and I think that the reason is that I use the program bad company (just I think..)

  So I want to reinstall os v4.5 of att.

  I have download and install on the computer and the vendor.xml file deleted, but still the Device Manager software reads not any update

  (the first time I connect my device it shows there are some updates, but after that I'll update the page, he says there is no update).

  How can I change my OS to os from att? (I don't want to go down and reinstall 4.5OS if possible... it takes so - time!)

  is there another solution to solve my problems?

  If you have another OS installed, you must first do it in Add/Remove programs and uninstall the "BlackBerry Handheld Software". Then you can download the software AT & T 4.5. If you are BlackBerry comes from AT & T you do not have to delete the vendor.xml file after installation. Later, you can simply go through the Application Loader to load the AT & T OS on your device.

• It is possible to say what OS blackBerry Smartphones is on the device by the serial number on the box?

  I just got a BB curve and it has OS 4.3. I want OS 4.5, but I have a mac so I can't load. I also went in several sprint stores, and they could not update my BB for me.

  So, I'm wondering if you can tell what the OS can be on the device (e.g., date of manufacture) from serial number. If you can, everyone has no idea what to look for in the number of SS or how to interpret it? I think going back to the store where I bought mine and its replacement by a new one with a serial number later and I want to make sure I get one with 4.5.

  There is no device OS 4.5 Sprint out of the box.  Sprint is not released 4.5, so that they are all 4.3 now.

  There is no way to determine the operating system of the number on the box, either.

• BlackBerry smartphones HELP! The device memory that is missing!

  After installing the Wifi File Transfer, I accidentally renamed the "store /" folder and now I cannot access the memory of the camera on my Curve 8520. Opening of the device memory in the application of files just shows a white screen. I lost all the preloaded images and tones, as well as the photos stored on the onboard memory.

  If I take a picture with the camera and tap Rename, a box will appear with the full path in the memory of the device, which is supposed to be "device memory/home/user/images". I can't access that more. I also can't access "Device memory/samples" that contains the ringtones and images.

  Wipe it and reload the operating system, but you will lose all the images on the device memory making (which SHOULD in the future be saved on press card!).

  I guess however that you renamed the "device memory/home/user / ' directory, you can go back and do it again, I don't really know. I never met anyone who does. It's looks like it's like deleting a directory, that's what you were doing.