impact of the backup proxy server appassure

Similar Questions

• Presentation of ID host ESX host LUN to the VCB Proxy Server

  I have a typical scenario where I have 3 ESX servers with 3 x 800 GB LUNS in a storage group separate on a CX 310 SAN box. The host LUN., of these 3 LUN Ids are 0, 1 and 2.

  I have a specific host that starts from SAN, from the same box of CX 310 SAN. At this point of time, I have no choice to use this server as a Server Proxy VCB. As far as my knowledge goes, LUNS of the ESX servers must be made visible to VCB Proxy Server, as they are presented to the ESX servers.

  My question here is, as the designated Proxy VCB server is booting from the SAN, he already has a host LUN 0 to Id the logic unit number this is the start of. The Id to host ONE of the first 800 GB LUN in the ESX Server storage group is also Host Id 0. Now, if I try to make the LUNS in storage group visible on the VCB Proxy Server ESX, is there not a shock of the VCB Proxy 0 host Id and Id host ESX Lun 0? I'm confused, I don't have a test envirinment where I could try this before I could actually go forward with any solution.

  My intention is to perform a backup outside LAN of the VMDK.

  Any help is that this respect is very much appreciated. Thanks in advance.

  (1) Yes, you can have different host for VCB then for your ESX host LUN ID

  (2) Yes, you can use the identifiers of naa, it will automatically use the identifiers of naa, no need to configure anything at all.

  Duncan

  VMware communities user moderator

  -

• New Guy Question - Disable Multi-Pathing on the VCB Proxy Server

  Hello everyone

  I had to install a Solution of the VCB Proxy. Among the issues is "Disabling Multi-Pathing on the VCB Proxy Server.

  Why would it be necessary to disable the multiple paths on th e VCB Server? What would be the steps to disable the multiple paths.

  Thank you all for any input on this issue.

  Here you go:

  http://www.Petri.co.il/how-to-deal-with-VMware-ESX-Server-VCB-multipath-issues-consolidated-backup-Windows.htm

  [i] Jerry [/ i] of the Jason

  [boche.net - VMware virtualization evangelist |] [ http://www.boche.net/blog/] [/i]

  [VMware communities user Moderator |] [ http://www.vmware.com/communities/content/community_terms/] [/i]

  [Area of Minneapolis VMware User Group Leader |] [ http://communities.vmware.com/community/vmug/us-central/minneapolis] [/i]

• Configure NLB on the NPS Proxy Server in windows 2008 R2

  Hello

  We have Proxy 2, NPS 2 NPS server and we have planned for NPS Proxy implimet NLB cluster, so RADIUS Client can use of NLB IP address for communication rather than 2 NPS Proxy address.

  We have configured the NLB on the NPS Proxy, Clients RADIUS servers, but are unable to recognize the NLB IP.

  Details of the NETWORK load balancing: -.

  The hosts are converging

  The default port rules are defined

  Filtering mode - multiple hosts

  Affinity - Single

  Load weight - equal

  Can someone help?

  Thank you

  Simo

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Library of visual c ++ runtime error message microsoft when you install the Backup Exec Server 2010 continues to protection on Windows storage server 2008

  When I try to install the Backup Exec 2010 Continuous Protection Server on Server Windows storage server 2008 I get error microsoft visual c ++ runtime library error. Runtime error! The setup.exe has put an end to this application has requested in a medium unusaul.

  Hello

  Your question is better suited in Windows server on TechNet. Please post your questions here.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Easy switch of the LAN proxy server settings?

  In order to access the internet at work, I need to go through a proxy server. But whenever I get home I have to turn off the proxy server. So, whenever I go home at night I have to click on 'Internet Options' (shortcut on the desktop), then "connection", then "network settings" and finally uncheck the box "use a proxy server for your LAN". And then every morning when I get back to work I have to do it again and re-check the box.

  Is there a way to make a shortcut directly on the screen 'network settings '?
  Better yet, could I get a click button to switch the proxy on and out, directly from my office? Does anyone know all the gadgets that offer this feature?

  Hi Taikoman,

  Please use the forum for Support of Vista,

  Please use your favorite search engine and do a search for "switch proxy on and out".  You should be able to find an editing software to do the job.

  NOTE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Modify the web proxy server to vCenter server

  Hello

  I installed the vCenter server on a virtual machine that is present at the top an ESXi host in my vSphere environment. The operating system installed on the virtual computer is Windows Server 2008. Now, I want to change the web proxy service on the vCenter server to allow the http connection. I'm following the steps in this guide:

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=%2Fcom.VMware.perlsdk.pg.doc_50%2Fviperl_proggd_preface.2.1.html

  However, the path specified in this guide: c:\Documents and Settings\AllUsers\Application Application Data VMware VirtualCenter

  is not present in Windows Server 2008.

  And the path that contains vCenter which is C:\Program Files\VMware\infrastructure\virtualcenter Server doesnot contain any proxy.xml file that needs to be changed.

  I need help with this as to how to activate the connection http on the vcenter server.

  Thanks in advance.

  Try to paste this path into the address bar in Explorer or in the command line. This is a hidden directory.

• Backup Exec and VCB proxy server configuration

  Hello

  I am installing Backup Exec to back up my virtual machine on an ESX Server, but I get the following error:

  *Backup- VMVCB::ESX01VCGuestVm(DC)ha-datacenter(DC)vmserver03* 
  
  
  V-79-57344-38220 - Backup of the virtual machine 'server03' failed. VMware VCB framework reported the following error
  
  
   
  
  
  Error: Failed to open the disk: Cannot access a SAN/iSCSI LUN backing this virtual disk. (Hint: Option "-m ndb" swtiches vcbMounter to network base disk access if this is what you want.) 
  
  

  It's my setup. I have an ESX Server connected to a San. I store my images on the SAN. I have Backup Exec installed on our file server that is also attached to the SAN and try to use this server as my VCB proxy server. I have installed on my server BE VCB framework and the enterprise Converter 3.03. I have setup a temporary staging that the server can access to place its snapshots on.

  My BE\VCB proxy server cannot access the SAN LUN that holds the images. My understanding of the process is that of BE I navigate on the ESX Server and select the virtual machine, I want to backup, and because the ESX Server can access the SAN LUNS where VM images are stored throughout the process of alignment of the image and place in the temporary storage area so that BE can then throw tape should work.

  Can someone help to solve my problem?

  See you soon

  Yes, it is the intention of the VCB.  Take the resources needed to run the backup out of the host and on the VCB proxy server.  You can define VCB to use the 'LAN' mode which backs the service console of the virtual computer on the network, but it is slower and puts more pressure on the host.

  Make sure you carefully follow the VCB document.  There are some things you need to do on the proxy before presenting the LUN as cutting diskpart automount. If you don't there is a chance that the lun might get corrupted and your VM would go bye-bye.

• I'm unable to update to the new version, "refusing to proxy server connection.

  I am running version 3.6.3 right now and I was not able to do the latest updates updated, because once that I go through the download process and to launch Firefox I get the message "proxy server refuses connections please try again later, and I'm unable to access the internet unless I redo the 3.6.3 installation.» Anyone who has the magic answer would be great, because I have to go through this process every day when I get on my laptop...

  If you were using Firefox 3.6. 4 or higher, a new preference has been added to the preferences of the proxy connection settings in tools > Options > Advanced Options > > tab network - connection = settings = use system proxy settings

  If you do not select no proxy and restart Firefox your problem should be solved.

• In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server, but in a few moments, the computer checks the box

  In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server (because it is blocking my access to Internet Explorer), but within moments, the computer checks the box. What can I do to stop the area of the check proxy server box?

  original title: LAN settings

  Have you checked for viruses?

  http://www.eset.com/us/online-scanner/

  It is very common that the virus to do.

• Satellite Pro C870-1E2 - internet connection problem Proxy Server not responding

  My old Toshiba computer connects to the internet via a numbered port,
  yet my new Toshiba Satellite Pro C870 1E2 connects to the internet through a proxy server.

  Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  When I tried the old computer connected instantly he had to wait a long period of time before that the "proxy" got it's act together.

  Advice please?

  > Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  And why you think you ve you have a problem with the Satellite laptop? I understand the original message: the Satellite acts as client.
  In my eyes there is a problem with the proxy server, and this should be checked first.
  Its almost impossible to tell which could affect the proxy, but as a first step, a reboot would be desirable.

• Proxy server in install Creative cloud

  I have users who have little proxy.

  Should what site I use to install Photoshop Creative Cloud?

  Hi Santiago,

  Please check the following Proxy Server address with Port numbers:

  https://na1mbls.licenses.Adobe.com

  https://IMS-NA1.adobelogin.com

  https://adobeid-NA1.Services.Adobe.com

  https://na1r.Services.Adobe.com

  http://activate.Adobe.com

  https://activate.Adobe.com

  http://Adobe.activate.com

  https://Adobe.activate.com

  ccmdls.Adobe.com:443

  IMS - na1.adobelogin.com:443

  na1r.Services.Adobe.com:443

  prod-rel-ffc - ccm.oobesaas.adobe.com:443

  LM.licenses.adobe.com:443

  www-DU1.adobe.com

  ccmdl.Adobe.com:80

  swupmf.Adobe.com:80

  swupdl.Adobe.com:80

  Thank you!

  Ankit

• Error message - unable to find the proxy server - how can I solve this problem

  When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.

  Set not to use any proxy.

  Firefox> Preferences > Advanced > network > setting > don't score no proxy

• We have two profiles on our DELL. A profile is now show this message - "the proxy server refuses connections" - when trying to connect to the internet.

  A user can connect internet - no problem, but other user gets - 'the Proxy Server is refusing connections. Emails are good all around. Have checked the settings, but can find no solution.

  Network proxy

  Type of topic: preferences< enter > in the address bar.

  Select Advanced > network.
  Search for configure how Firefox connects and then press the settings button.
  Check the settings.

• The proxy server refuses connections

  My Pc has a virus and trend helped me to remove, but now whenever I connect to Fire Fox set-aside notification appears
  The proxy server refuses connections
  Firefox is configured to use a proxy server refusing connections.
  Check the proxy settings to make sure they are correct.

  Contact your network administrator to make sure the proxy server is working.
  

  You can check the connection settings.

  • Tools > Options > advanced > network > settings
  • https://support.Mozilla.org/KB/Options+window+-+advanced+Panel

  If you don't need to use a proxy to connect to internet, and then try if "use the system proxy settings", select "Not of Proxy" or one of the others do not work properly.

  See "Firefox connection settings:

  • https://support.Mozilla.org/KB/Firefox+cannot+load+websites+but+other+programs+can