Easy switch of the LAN proxy server settings?

Similar Questions

• LAN Proxy Server settings are not retained

  I get an error of security proxy server credentials when connecting to Office365 from the local network connected PC Split HP runnng Windows 8.1.  We use a proxy server.

  When I check the control panel configuration, internet options, Connections tab, network, under the proxy server section settings button the box IS COCHEE to «use a proxy server for your LAN...» »

  I uncheck the box, click on OK and it backs up to the Connections tab.  In this tab, the box apply is grayed out (which may seem reasonable, given that the changes I made are on a screen of a level down on the LAN configuration screen.

  Anyway, after a while and always after the system has been locked on in «standby mode", settings return to check a box to «Use a proxy server for your LAN...» »

  The changes are simply not found.  My user account is administrator.

  Any solution to this setting removed by using a proxy server?

  I solved it without defining the system to its default settings.  Thinking that maybe it's a corruption of user admin role I added other roles to my user profile form which also have the ability / permission to make changes.  Fact:

  Control accounts of user/group/tab Manage User accounts / light tone my admin account / Advanced tab/advanced/users/select my account/member/added the roles of IIS_UISRS, network and Network Configuration operators.  (not easy thinking for an average of fall through user)

  all saved and accrued

  Once this is done, the Lan Proxy settings have been stable.

  However, a prior problem with the audio still exists.  The default value of the audio device continues to change speakers on the 2nd screen rather than the laptop speakers.  I can make changes and he returns back from a seemingly random way.  HP, a system Dingo!  Maybe a bios update will fix.

• Presentation of ID host ESX host LUN to the VCB Proxy Server

  I have a typical scenario where I have 3 ESX servers with 3 x 800 GB LUNS in a storage group separate on a CX 310 SAN box. The host LUN., of these 3 LUN Ids are 0, 1 and 2.

  I have a specific host that starts from SAN, from the same box of CX 310 SAN. At this point of time, I have no choice to use this server as a Server Proxy VCB. As far as my knowledge goes, LUNS of the ESX servers must be made visible to VCB Proxy Server, as they are presented to the ESX servers.

  My question here is, as the designated Proxy VCB server is booting from the SAN, he already has a host LUN 0 to Id the logic unit number this is the start of. The Id to host ONE of the first 800 GB LUN in the ESX Server storage group is also Host Id 0. Now, if I try to make the LUNS in storage group visible on the VCB Proxy Server ESX, is there not a shock of the VCB Proxy 0 host Id and Id host ESX Lun 0? I'm confused, I don't have a test envirinment where I could try this before I could actually go forward with any solution.

  My intention is to perform a backup outside LAN of the VMDK.

  Any help is that this respect is very much appreciated. Thanks in advance.

  (1) Yes, you can have different host for VCB then for your ESX host LUN ID

  (2) Yes, you can use the identifiers of naa, it will automatically use the identifiers of naa, no need to configure anything at all.

  Duncan

  VMware communities user moderator

  -

• New Guy Question - Disable Multi-Pathing on the VCB Proxy Server

  Hello everyone

  I had to install a Solution of the VCB Proxy. Among the issues is "Disabling Multi-Pathing on the VCB Proxy Server.

  Why would it be necessary to disable the multiple paths on th e VCB Server? What would be the steps to disable the multiple paths.

  Thank you all for any input on this issue.

  Here you go:

  http://www.Petri.co.il/how-to-deal-with-VMware-ESX-Server-VCB-multipath-issues-consolidated-backup-Windows.htm

  [i] Jerry [/ i] of the Jason

  [boche.net - VMware virtualization evangelist |] [ http://www.boche.net/blog/] [/i]

  [VMware communities user Moderator |] [ http://www.vmware.com/communities/content/community_terms/] [/i]

  [Area of Minneapolis VMware User Group Leader |] [ http://communities.vmware.com/community/vmug/us-central/minneapolis] [/i]

• Modify the web proxy server to vCenter server

  Hello

  I installed the vCenter server on a virtual machine that is present at the top an ESXi host in my vSphere environment. The operating system installed on the virtual computer is Windows Server 2008. Now, I want to change the web proxy service on the vCenter server to allow the http connection. I'm following the steps in this guide:

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=%2Fcom.VMware.perlsdk.pg.doc_50%2Fviperl_proggd_preface.2.1.html

  However, the path specified in this guide: c:\Documents and Settings\AllUsers\Application Application Data VMware VirtualCenter

  is not present in Windows Server 2008.

  And the path that contains vCenter which is C:\Program Files\VMware\infrastructure\virtualcenter Server doesnot contain any proxy.xml file that needs to be changed.

  I need help with this as to how to activate the connection http on the vcenter server.

  Thanks in advance.

  Try to paste this path into the address bar in Explorer or in the command line. This is a hidden directory.

• How to determine the outgoing (SMTP) server settings?

  ErrorMessage:
  The message send failed.
  The message could not be sent to the help of Outgoing server (SMTP) smtp.uniq.edu.ht for an unknown reason. Check that your outgoing (SMTP) server settings are correct and try again...

  How to do this? The parameters are defined automatically. Maybe Thunderbird should check its database of the email provider.

  It would appear that the outgoing serer must be
  Outgoing mail server: (SSL) box810.bluehost.com (server requires authentication) port 465

  THEN right-click on the account in the list and select settings
  Open the entry in the list of accounts for the outgoing (SMTP) Server
  Select your outbound service, and then click on edit.
  Update of the parameters specified by your provider.

  Now, I got my information on page 15 of this document.
  www.uniq.edu.HT/ressources/20130510201220.pdf

  Thunderbird information begins on Page 9

• Configure NLB on the NPS Proxy Server in windows 2008 R2

  Hello

  We have Proxy 2, NPS 2 NPS server and we have planned for NPS Proxy implimet NLB cluster, so RADIUS Client can use of NLB IP address for communication rather than 2 NPS Proxy address.

  We have configured the NLB on the NPS Proxy, Clients RADIUS servers, but are unable to recognize the NLB IP.

  Details of the NETWORK load balancing: -.

  The hosts are converging

  The default port rules are defined

  Filtering mode - multiple hosts

  Affinity - Single

  Load weight - equal

  Can someone help?

  Thank you

  Simo

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• impact of the backup proxy server appassure

  Hello

  I'm curious to know what kind of impact running a backup during peak hours on your servers. I was just making my feet wet with appassure, so we did turn the backup in a very traditional manner with a single backup from one day to the next.

  We started trying to leave the appassure make multiple backups throughout the day and we had mixed results. Some servers seem to completely affected by running Backup and other bog down severely without any obvious reason for me (on the same workload, card etc.)

  I'm nervous to run backups every few hours on busy servers, but those are the ones who benefit the most of frequent backups.

  I'm curious to know what is the impact for others especially on busy servers exchange or sql.

  Thank you

  Hello ajna

  Thanks for your question.  AppAssure have experience with a large number of customers who protect Exchange environments and SQL on an hourly basis and impact should not be noticeable while backups are running but there are a few caveats.  The agent itself must meet the minimum specifications required for AppAssure - http://documents.software.dell.com/appassure/5.4.3/release-notes/system-requirements/appassure-agent-software-requirements.   Memory and network requirements are of particular importance.

  A Microsoft requirement for the underlying copy Service VSS (Volume Shadow) smoothly is also generally all protected disks should have at least 10% to 15% of free space and that the VSS writers on the system are healthy (this is particularly relevant for Exchange and SQL).

  I hope it's to reassure however support would be happy to help you with specific questions, you can experience.

  .

• In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server, but in a few moments, the computer checks the box

  In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server (because it is blocking my access to Internet Explorer), but within moments, the computer checks the box. What can I do to stop the area of the check proxy server box?

  original title: LAN settings

  Have you checked for viruses?

  http://www.eset.com/us/online-scanner/

  It is very common that the virus to do.

• All traffic Vlan to the Interface of the Proxy Server

  Hello!

  I need little help to route all the traffic on VLAN to the proxy server.

  I have different VLANS on switches L2 200-26 and by 300-28-L3 for routing.

  I have already created VLANs and able to rout them, but facing problem for routing traffic to the interface proxy for internet access.

  I have different VLAN for example Vlan 10, 10.10.10.0/24 sales, Vlan20 10.10.20.0/24 Marketing. I have trunk between switches interfaces and default 1U is the same on all switches.

  My proxy server has two NICs, one is connected to a dsl modem and other one to the switch port that uses the IP 192.168.0.2 to default vlan1.

  I am able to surf the internet using vlan1 but not on ther VLAN.

  I put the route defaults to the switch of 192.168.0.2, but don't not routing for internet to another VLAN.

  Thank you

  Hello

  To answer your questions:

  1. I have to update the following files?

  https://software.Cisco.com/download/release.html?mdfid=283019617&release...

  Yes, please let me know what firmware and boot code, that you have right now and I'll tell you what is the best way for you to upgrade because you shouldn't go straight to the latest firmware unless you run already 1.3.5.58 or later version.

  2. it supports to 8 dhcp pools. I have swimming pools, but I have more than 8 VLAN. I put all the settings, works very well.

  You are right and I forgot to mention the limitation of only 8 DHCP pools, I'm sorry. That being said, make sure that your current DHCP server uses IP addresses assigned to each VLAN on the switch as the gateway by default for the VLAN respective.

  3 for the Proxy Server, I need to find a way to point back roads of VLAN to vlan mapping static address on the switch. I'm confused in this little piece.

  I understand that this can be confusing, let me see if I can explain it a little better.

  Assuming that everything on the switch is configured according to my recommendations can

  1. you need a single, a route by default on the switch, so that when a PC is connected to one of VLAN on she tries to go online, an unknown IP address to the switch, it will send it to the Ip address of the router, because the proxy server will be able to reach this IP public, unknown to any Web site.

  2 - when the traffic is back to this Web site, it will be intended for another subnet that the proxy server is on. Suppose the answer is looking for 10.10.10.100 (subnet unknown to the proxy server), without a static route on the proxy server it say where to send this traffic, packets are simply deleted.

  3. you need to create as many static routes on the proxy server as the amount of VIRTUAL LANs, you have on your network.

  For now I know that the proxy server is 192.168.0.2 on VLAN 1 but I don't know what the IP address of the switch is on the same VLAN, it should be something on the 192.168.0.x range.

  All journeys should look like this:

  10.10.10.1 255.255.255.0 send 192.168.0.x (IP address of the switch on the VLAN 1)

  10.10.20.1 255.255.255.0 send 192.168.0.x (IP address of the switch on the VLAN 1)

  Alternatively, if all your internal VIRTUAL local networks are on the beach of 10.10.x.x then you should be able to create a single rule to summarize all the VLAN as this:

  10.10.1.1 255.255.0.0 send 192.168.0.x (IP address of the switch on the VLAN 1)

  Please let me know if it was a little clearer.

  Feel free to ask any questions.

• Software exists for the creation of a 'virtual' network card and going to all the traffic on the local network through a proxy server, then by this adapter?

  I can access net through LAN and my college requires a proxy for all access to the internet. If you want to use the internet, it is impossible to do not use a proxy. This is a problem for many programs that do not seem to allow you to enter the proxy settings.

  any software is to create a 'virtual' network adapter that will pass all traffic network (or any protocol x traffic) through the proxy?

  So I have do not need to enter the proxy anywhere... and I have normal internet access.
  What I saw is possible with OpenVPN, but it is a vpn service that I need .i just want to use the feature. In OpenVPN I just enter my proxy server in its framework and OpenVPN to connect to a VPN service and routes all traffic to the FAUCET adapter after which I don't need to set the proxy address anywhere... so my idea is how can I use only the last part that is routing all my LAN traffic to a virtual card.

  Support the LAN---> proxy---> virtual adapter--->, then software I access the net

  That's what I like to do...

  Although I am facing this problem on Windows 7, solutions for all operating systems are welcome.

  P.S: Proxifier is not my solution to not offer something like this.

  Hi Sapan,
  Thanks for posting in the Microsoft community!
  You can use your favorite search engine and look for the software that meets your requirements.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• The proxy server is not responding

  I have Windows 7 and IE 10.  I get this message every time I try to connect to the Internet: the proxy server is not responding.  It is not the modem because I can connect with other wireless devices.  When I try to fix it, I get the message: windows could not automatically detect the network settings of the proxy.

  Hi Sam,

  Were there any changes made on the computer before the show?

  You can get this error if there is no proxy server is configured on the computer or due to a third-party program. Follow these methods to solve the problem:

  Method 1:

  I suggest you to follow these steps and check if that helps:

  a. open Internet Explorer.

  b. click on Tools and then click options Internet.

  c. click on the connections tab, and then click LAN settings.

  d. deselect use a proxy server for your LAN.

  e. place a check on automatically detect connection settings.

  f. click OK twice.

  You can also see the article for more information:

  Change the proxy server settings in Internet Explorer

  http://Windows.Microsoft.com/en-in/Windows7/change-proxy-server-settings-in-Internet-Explorer

  Method 2:

  Refer to the article to verify if a violin is the cause of the problem:

  [Violinist] Difficulty "the proxy server is not responding" problem caused by a violin

  http://blogs.msdn.com/b/tfang/archive/2012/07/18/Fiddler-fix-quot-the-proxy-server-isn-t-responding-quot-problem-caused-by-Fiddler.aspx

  Let us know if it helps.

• The proxy server does not-Windows Internet Explorer

  After completing the windows updates, I started getting the following message every time I tried to enter in IE10: the proxy server does not-Windows Internet Explorer.

  1. try changing the proxy server settings in Internet Options > connections > LAN settings.  All the options are greyed out, cannot be changed.

  2. I checked that I am an administrator on the computer user.

  3. get the same error message, both wired and wireless configurations in.

  4. do you have a restore point at an earlier date - the same error.

  5A attempted to use Firefox 15.0.1 and I get the error message: the proxy server refuses connections

  My system:

  Acer

  AOD255

  Intel (r) CPU Atom N550 1.50 GHz 1.50 GHz

  1.00 GB OF RAM

  32-bit operating system

  Windows 7 Starter

  Service Pack 1

  Hello.. Please try following method to solve your problem.

  Tools-> Internet options and click the Advanced tab, and then tap on restore avancΘs to restore the default settings of Microsoft internet explore.

  If you still have problem

  go to tools-> internet Options-> Advanced-> Reset internet explore settings click on the Reset button.

• Laptop does not start... says windows 'the Proxy Server is not responding.

  Laptop has just received an automatic update of windows and after that, I get the message on the remote control unit does not accept the connection... I only put in place that I use a router w/data cable to connect two computers remotely

  Whasssup, "Jay"?

  Were there any changes made on the computer before the show?

  You can get this error if there is no proxy server is configured on the computer or due to a third-party program. Follow these methods to solve the problem:

  Method 1:

  I suggest you to follow these steps and check if that helps:

  1. open Internet Explorer.

  2. click on Tools and then click options Internet.

  3. click on the tab connections , and then click LAN settings.

  4. uncheck the option use a proxy server for your LAN.

  5 place a check on automatically detect connection settings.

  6. click OK twice.

  You can also see the article for more information:

  Change the proxy server settings in Internet Explorer

  http://Windows.Microsoft.com/en-in/Windows7/change-proxy-server-settings-in-Internet-Explorer

  Method 2:

  Refer to the article to verify if a violin is the cause of the problem:

  [Violinist] Difficulty "the proxy server is not responding" problem caused by a violin

  http://blogs.msdn.com/b/tfang/archive/2012/07/18/Fiddler-fix-quot-the-proxy-server-isn-t-responding-quot-problem-caused-by-Fiddler.aspx

  Let us know if it helps.

  Good luck, mate!

• I'm unable to update to the new version, "refusing to proxy server connection.

  I am running version 3.6.3 right now and I was not able to do the latest updates updated, because once that I go through the download process and to launch Firefox I get the message "proxy server refuses connections please try again later, and I'm unable to access the internet unless I redo the 3.6.3 installation.» Anyone who has the magic answer would be great, because I have to go through this process every day when I get on my laptop...

  If you were using Firefox 3.6. 4 or higher, a new preference has been added to the preferences of the proxy connection settings in tools > Options > Advanced Options > > tab network - connection = settings = use system proxy settings

  If you do not select no proxy and restart Firefox your problem should be solved.