Import the Audio?

Similar Questions

• Cannot import the audio of any type in Flash CS6 Pro

  Hi all

  I have recorded voice over using hearing and try to import the audio files in Flash CS6 - the problem is that I get the error "one or more files were not imported because there was a problem to read the.

  I tried a multitude of various parameters during the recording of the hearing, including the types of alternative files, all with the same result.  To test yet, I tried to past audio recordings used in other flash videos and I get the same message.  Could someone post ideal settings so I can test that vs have to try each setting at random from there?  I'm running out of options (and sanity!) at this point.  Thank you

  RESOLVED - this issue has something to do with Windows 7.  I came across a thread where someone had a similar problem.

  Turns out that 64 - bit Windows 7 users MUST have Quicktime and iTunes installed for audio works correctly with hearing and Flash.  Flash gives constant problems without it.  Now if only Adobe would update their mistake so users understood what was happening and the resolution is as simple 20-minute download/installation of the e-mail software, life would be much easier for some of its user base.

  Hoping that it happens sooner rather than later.  Hope this post proves useful in the future

• Import the audio... What are the advantages and disadvantages for the import drag vs click on the box?

  It is perhaps an obvious question for most, but I was wondering is there a preference there for importing audio to slide vs click box? I am audio importer at each of my slides, but before I get to deep into it, I was hoping that someone could clarify this point?

  Basically there is the audio option in the menu tab or the audio add on the property box. They seem to do the same thing, but is there a difference? I feel like I may be missing something obvious and don't want to have to go back and correct if I chose the wrong option.

  Thank you in advance.

  Michele

  Objects have any defined transition?  If so, try to set without transition and see if it appears.

  In addition, check what invisible objects layers are on.  They can appear in another object.  I have found that sometimes Cp will show the object as being on a top layer, even if it is not.  If you select the object and use the toolbar option to place at the front, which can sometimes be displayed not correctly, even if his diaper doesn't seem to change.

• Import the audio files I have are not all sounds...

  so I imported the music, but when I try the previewed image, I don't hear anything. How can I fix it?

  Your warning traced the beam shows that you don't have a card Nvidia installed or configured correctly. Standard comps will make very well.

  For other questions please start with Basic Workflow, a series of 3 videos that shows how AE, or visit this link from the homepage of this forum: AE Basics

• Import audio data - window of Audio sync not opening during the audio broadcast on multiple slides

  Hello

  I am importing PowerPoint files in Captivate 4 with the view with audio recorded separately on top of these PPT Slides.

  The PowerPoint file and associated slides to import with no problems. When I import the audio in the timeline view, it treats the MP3 file without any problem and adds the audio file to the library and the first slide. I can get the window asking me how I want to import the audio, to shich, I select the audio acorss to distribute several slides option.

  In previous versions of Captivate, the Audio sync popup then appears to allow me to choose at which points to divide the audio between slides. Unfortunately the Audio Synchronization window does not appear.

  My system Details are as follows:

  -PowerPoint 2007 slides

  -Captivate 4

  -Windows 7

  No reason as to why this problem occurs?

  M.

  Hello

  Please try to open the Captivate as an administrator-

  Solution 1:

  1. go to the Captivate installation location. Generally, it is present here-

  C:\Program Files\Adobe\Adobe Captivate 4

  2. right click the "AdobeCaptivate.exe' and select 'run as administrator '.

  3. now try to run the same steps. It should work

  If this does not work, try the following set of steps mentioned below.

  Solution 2:

  Close the Captivate and try the following.

  1. Identify the location of cmd.exe. Usually found in C:\Windows\System32\
  2. Click right-click on cmd.exe > select run as administrator
  3. Launches the command prompt
  4. Now, go to the Adobe Captivate 4 installation location. In your case, it may be C:\Program Files\Adobe\Adobe Captivate 4
  5. Now, run the command regsvr32 NSAudio.dll
  6. Once you get a confirmation dialog box, run the next command regsvr32 WaveEditCtrl.ocx
  7. Again, you should get a confirmation dialog box.
  8. Now launch Captivate and try the same steps. It should work.
  Kind regards
  Mukul

  Post edited by: mvlele

• In some sections of the audio out of sync

  Hi guys

  Ive been reading other messages audio, synchronize the questions but can't seem to find a solution...

  My question is the first two minutes of my video is good, but after that it seems that audio goes out of sync by round a second or two.

  Ive tried re-import the audio, change the file type. MOV and recreate a new project with different parameters. Nothing works.

  First Pro CS6

  
  Any input would be greatly appreciated

  Alec

  Hi Wade,.

  Please convert / transcode your videos to a different file format.

  You can use this hand brakeapplication.

  Let me know if this helps.

  Thank you

  Ilyes Singh

• How can I synchronize a new track to the audio spectrum, effects and audio amplitude logo

  Hello!

  How do I paid recently a graphic designer to create a sound model for my music on youtube channel, but the problem is that I do not know how to synchronize a new track to the audio spectrum, the effects and the logo of the audio amplitude (pumps logo to the sound of the track that he gave me in the layout) but I would like to synchronize it instead of a new track at all. [Please help:]

  Click on the tab "LOGO of MOUNTAIN" or double-click the color icon in the Panel layer to open the publication.

  Import the audio file in the project Panel.

  Click on the new audio file in the project Panel to highlight.

  Click on the 'old' audio file in the Panel layer to select it.  (they are both put in evidence now)

  Now, hold down the 'Alt' key and then drag the new audio file of the project on the old audio layer panel in the layer panel.

  Doing it this way will automatically do all necessary connections to the old file to the new file.

  Or... you could just drag the the new audio tracj in the Panel layer compositions 'sound '.

  Select the solid layer that has the applied Audio Spectrum effect.

  Then in the Audio Spectrum effect setting pane, find the list at the top of "Audio Layer" drop-down list, click the menu drop-down and select the new audio layer.

• Is it possible to the mouth of the audio file player and the rest of the face/body of webcam? separately?

  Hello, I'm tooling autour with character animation to cover a part of a video show teachers. (so when they watched script, or are a little stiff, I hope transition on an animated version that I'm driving).

  I have audio of the actor, which I would like the puppet to lip sync with. hoping I can layer my performance of web cam on top, for all other parts (everything EXCEPT the mouth).

  It looks like these end upward on different layers once you have saved a shooting. so. is it possible to hunt them separately?

  (just check that it is possible, before I have to spend too days banging my head against the problem). (that is to say, if it's only or live webcams, recording only, for everything, please let me know).

  Hi Warren. If you want to control the automatic pre-recorded audio lip-sync, import the audio into your scene, select your character in the timeline panel and then run Menu > object > Compute Lip Sync of Audio scene.

• What is the Audio element ID for?

  Hello. I'm in Captivate 4 and you have a Wrod translated caption file can I import to update all captions.

  In this word file theres a section near the bottom, audio IDS, one for each audio file of the project.
  Are these supposed to be used to import the audio translated once that I get it, if the audio files are named using those numbers?

  If this is not the case, what the heck are these audio identification numbers for?

  I couldn't find any reference to them using Google.

  Rik

  Innovatia

  Hello

  When you choose to export, pay attention to what the menu item says.

  

  Note the bit 'subtitles '. That's what you see in the Word Document.

  

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• I would like to import the contents of an audio book on cd for my audiobook file into iTunes.  How can I transfer content song (in iTunes) to the audiobook file lists?

  I would like to import the contents of an audio book on cd for my audiobook file into iTunes.  How can I transfer content song (in iTunes) to the audiobook file lists?

  Go read the information, click on the 'Options' tab, then change the drop-down list of "sort of media" to "Music" to "Audiobook". That worked for me, I hope that it helps you also.

• I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions

  I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions?

  danobtwo wrote:

  See the video, I hear the audio until it is imported.  any suggestions?

  Do you mean during the import process?

  There is no FCP X parameter to change the way THAT DV is imported.

  I used to hear the audio import with Sony cameras but Canon may be a different story.

  If the imported files are OK, then it can be a thing of Protocol firewire Canon.

  Al

• On windows movie maker, it's only allowing me to import some audio, but not the audio I need.

  When I select the audio I want he says "for example. MP3 could not be imported. »

  If you convert the MP3 to WMA format before
  import into Movie Maker, you can get a better
  result.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

• I can't import my calendar, only the audio video

  Help please!

  Hi, I imported the .mts files in my project on CC Adobe Premiere Pro, and I can read the file properly with video and audio.

  But I can't import the video portion of the file on my calendar... can anyone help?

  It was an urgent video and I'm really stuck.

  The audio part drags very well out there, but the video portion will not follow. Even after doing my good cuts and tried dragging or using the buttons :/

  Hi Vajanel,

  Do you still need help with that?

  Also, visit this link:

  FAQ: Why no audio or video will not at the track where I let down?

  Thank you

  Ilyes Singh

• Why the audio is not imported?

  Hello !

  When I import a file, say a mp4, only first file import the video file without audio.

  Is there something that bad?

  Thank you for your time.

  See here:

  FAQ: Why no audio or video will not at the track where I let down?

  After the clip in the timeline, there is no audio track of the clip more

  If this isn't your problem, how you import and the container and codec files?

• The imported clips audio ends before video

  When I import the video (m4v) first 12 items for Mac (or first 10 items by the way), the audio section of the clip ends abruptly, but the video continues until the end of the clip. I saw the video clip in QuickTime and audio and video are very good. What I have mentioned is also true if I tried it on my MacBook Air. I tried to cut the clip to QuickTime if just the last part of the rest clip and when I import this file into the Prime Minister, this element also has the last missing piece of audio!

  I use a 27 iMac (mid 2011) with 10 Gig of RAM and a lot of HARD disk space. I'm running Yosemite which is updated.

  Any help would be greatly appreciated!

  Mike

  I'm glad you found a solution, miker!

  Please mark this question as answered. Thank you!