In some sections of the audio out of sync

Similar Questions

• Audio out of sync and missing

  I have several clips of my Panasonic LX-5 (720 p). I created a new project (CS 5.5) and import the clips. When I play the file directly from Windows Explorer, all right. However, in the timeline, the audio is ahead of the video, then partially through an element, the audio disappears altogether. In addition, the line in the upper part of the sequence is yellow (above the transitions, it is green). I thought that perhaps the final exported file would be nice, but he had the audio out of sync and missing in the same places, too.

  Any ideas what's happening here?

  Thank you

  Jay

  Thanks for the offer, Jim. It turns out that, delete the files from the cache of forced media audio again in line (as when a fall new video clips in the bin in a project). That fixed it.

• 9.2 Organization repeat audio to fill after empty sections of the audio in the timeline panel. No work around? I'm on a MacPro to 2014.

  Just noticed this problem with empty sections of the audio in the timeline panel. 9.2 organization wants to fill then with audio of the previous element rather than let their silence when it is rendered. No work around for this bug?

  Hello

  On Mac, you can export via SOUL with sequences of import in native mode. Alternatively, you can export directly from Premiere Pro. It should be resolved. You can also export with a "Virgin" audio section where you have gaps.

  This is a known issue that we should have fixed in our next update. Sorry for the problem.

  Thank you

  Kevin

• Video quality has dropped and Audio Out of sync (EPA 12)

  Edited a video of 30 minutes and took a few clips of him. After the project and saving it, I noticed a severe drop in video quality and despite to realign the tracks audio/video, audio installs always out of sync. Original video clip plays fine and I would just download those, but there are too many dead zones and some splicing that needs to be addressed. At first I cut sections of video caused the problem, but the video before editing it produced out of sync titles as well. on a 30 minute video, audio Animes before nearly 10 seconds.

  EPA 12 Windows 8.1.

  Video camera: Replay 720XD (manual specifies EPA or Quicktime [Pro] Edition)

  Video information by gspot: 29.412 FPS; Resolution 1280 x 720; Audio codec: MP4a:Mpeg - 4 AAC LC video: avc1 H.264/MPEG-4 AVC

  QuickTime is also updated.

  I was see several other discussions on this topic with different answers, which makes me think that every problem is something different. Also, there are not too many threads with solutions. Also concerned by the fact that this problem seems to go as far as 10 EPA.

  BadWolfRacing

  I see no mention of rate constant or variable in the documents of the camera (only 30/60 NTSC or PAL 25/50).

  The only clue that I don't have that cadence is variable, it is as 29.412 frames per second that you give to your video.

  I had advanced for the camera users section and can't find anything that goes with this question. If your camera records with a constant speed then you will see 29.97 or 30 and not 29.412.

  We support the idea of constant compared to variable rate for your video by running the video via the properties of MediaInfo program playback. If your video has a variable rate, reading on will give a minimum, 'general' and maximum playback for cadence.

  http://sourceforge.NET/projects/MediaInfo/

  Just be careful for carryons unwanted in the download of this program.

  You seem to have 1280 x 720 @ 29,412 progressive frames per second (variable frequency), presenting as AVCHD.mov. And apparently you transfer the recording to the camera as the video compression AVCHD (MPEG4 AVC/H.264).mov, not a "MPEG" such as MPEG2 video compression...

  Variable rate in first Elements = always no problem. I have the iPod video and iPhone 5 (with variable rate) and any import problems (audio out of sync or other), edition, exported from Premiere Elements set the correct project presets and work with content timeline made. There are some who have problems. For them, the answer is borrow the video in software to change the variable in a constant rate.

  Whether you use the original or the original converted to the hand brake

  The project preset

  NTSC

  AVCHD

  AVCHD LITE 720p30

  Export of QuickTime H.264.mov (720 p 30)

  Publish + share

  Computer

  QuickTIme

  with Presets = NTSC DV 16:9

  and, under the Advanced button/video settings tab, make sure that settings are as shown in the screenshot

  

  The transmission speed is cut in the screenshot. Leave it disabled for now. We can talk about Bitrate and file size later.

  Export for AVCHD AVCHD.mp4 (720 p 30)

  

  Please read the above and let us know if any information improved the situation.

  Any questions or need clarification, please ask.

  Thank you.

  RTA

  Add on... Just in the notes on the case... the publication + share/computer has more choices than Adobe Flash Video, MPEG and AVCHD. The need for rest to scroll to with the tiny scroll right bar. Or, you can click on Adobe Flash Video, so that the Panel will turn blue. Then use the down arrow key to move to the bottom of the list or the up arrow to move to the top of the list.

• Audio Out of Sync and Insert Clip out of a framework

  I record my audio and video separately. I use the merge Clips feature to merge together, now made dozens of times, never a problem. He did it with this new project, everything looks and sounds very good.

  But when you change the pieces of an element in a sequence, each inserted bit is the "audio is out of sych" red text. It is out-of - 0:72 to a clip or - 0:87 for another.

  However, it is not enough for me to see when I play it back, so I did fi from it as I change. Sometimes I slip in sync to remove the red text, I can't make a difference.

  But also sometimes when I insert an element in the current sequence, the marker/cursor script (don't know what it's called, the line blue large marking this place in the sequence where everything I insert will be inserted) is disabled by a frame. Sometimes it's off in one direction, which means that I get random empty images in playback, or it is off in the other direction and I am slowly accumulated unique axe off executives.

  Someone has an idea of what's going on? How the audio is out of sync in the first place? Why the function Insert Clip move the cursor in a strange place?

  Nevermind, I figured it. I chose the wrong preset when I made a new sequence. 60 frames per second instead of 59.whatever. >.

  Thanks to reddit for the answer: Audio Out of Sync and Insert Clip Off By A Frame: first

• Audio out of sync with the video

  Hi I am new to animate... so far, I'm having a lot of fun with it. I ran into the first question that I have not been able to overcome.

  I recorded a voice over my my movie in another standard (Studio One) .wav file, the program and imported it into my library. Spent some time the vocal track and animation edition so everything aligns properly Animate. When I test the movie using the game control to animate everything syncs perfectly. When I test using ctrl + enter or publish the movie and play in my browser the audio and video is no longer online. The audio plays at the correct speed, but the video is about 10% faster, then it should be. Is equivalent to 5 seconds in a second animation 45. No idea what I am doing wrong?

  What rate and few sample depth was the WAV? Animate it is 44.1 KHz, 16-bit. If you use 48 kHz or 24-bit, you can run into trouble.

  If you use 44.1 KHz, 15 bits, you make a SWF file or is it HTML5 Canvas? With SWF, you can set the sound synchronization on the Stream, and the graphics and the sound will keep in sync. If it's HTML5 Canvas he uses the event sync, and if your animation is demanding, it will go out of sync.

  There are ways to use Javascript to stay in sync. Something like that in frame 1 of the animation:

  var starttime is createjs. Ticker.getTicks ();

  createjs. Ticker.setfps(25) (24); the 24 would be different if your pace is something else

  this.addEventListener ("tick", movealong);

  var self = this;

  This.Stop ();

  function movealong() {}

  var = now createjs. Ticker.getTicks ();

  self.gotoAndStop (Math.floor (now-starttime));

  }

• some parts of the audio of the video do not play on all devices

  I recently exported a video in first pro through media encoder.  It played fine on my computer.  The video begins with a bumper with audio and then goes to a speaking spokesperson.  I then downloaded on youtube and yet once again, everything was going well for me.  But then I heard from a colleague that he could hear the audio during the bumper, but once the person got on the screen he had no audio data.  I've never run into something like this before.  I went to check and found that if I watched the video on firefox, it worked but not through google chrome (though chrome worked for me).  I thought it was a weird extension or something that she had installed that might have been originally it and don't worry.  Hey well last night our posted the video on facebook and youtube social media person arrived again reports the same behavior but this time it was on several aircraft types.

  I used the 1080 p vimeo export preset in media encoding.  Everyone has faced something like this before?  This is the first time for me and just baffles me.  I think that if we could hear the intro music you should hear all audio - it's all an audio track.  But I guess I'm wrong?

  I found the problem.  It turns out that it was a problem of phase cancellation.  When the audio has been converted to a stereo left mono signal and tracks right were to cancel each other.

• SX700 Audio Out of sync

  I just bought a new SX700 and have had several videos in the last 24 hours.  In each of these videos, a few short and other long, the audio is out of sync.  Am I missing some setting or I would return the camera for a replacement?  This cannot be normal.

  I sent the SX700 because I need third importation of video software and the software of Canon has not been updated of the Mavericks.  To use the camera without the software means I have to import the images in Final Cut Pro and iMovie and various editing and image Adobe programs.  It's just too.  I need all images placed in a usable format in a folder on my desktop, so I can choose.

  Nice camera.  If you are going to release a nice camera you must also update your own software or lose sales.

• With audio out of sync PNG sequence

  I'm having a problem with frame rates when you import my PNG sequence into AE.

  There is always a lag, I can't say exactly what it is but my project file is 24 frames per second and so is my exported sequence.

  The audio is always out of sync for some reason any and I must reduce my PNG sequence to match the audio, there always look weird but.

  

  You import files > Scripts > new host character model Recording.jsx?

• Audio out of sync after importation. MOV

  Audio issues out-of-sync after you import a clip .mov in Premiere Pro.

  The .mov video the problem doesn't have a problem when played with quicktime or vlc: audio fits perfectly with the video.

  Adobe Premiere Pro 7.2.1 CC (4) on OSX 10.9.1

  Open the first new project... > OK > import the single video clip (either by dragging in the app, or by using the media browser). Start to play the clip in the Source monitor, rub with impatience. Result: audio and video are way out of sync.

  Clip .mov, the origin of the problem has been exported to the Silverback app.  http://silverbackapp.com/

  Details on the clip .mov, via Media Inspector app:

  ============================================================

  General

  Full name: /Users/jukeboxhero/20140203.mov

  Format: MPEG-4

  Profile format: QuickTime

  Codec ID: qt

  File size: 638 MiB

  Duration: 34 min 46 s

  Overall bitrate: 2 566 Kbps

  Encoding date: UTC 2014-02-04 06:52:45

  Marking date: UTC 2014-06-02 15:55:40

  Library: Apple QuickTime

  Video

  ID                               : 2

  Format: AVC

  Format/Info: Advanced Video Codec

  Format profile: [email protected]

  Parameters of the format, CABAC: No.

  Parameters of the format, Reframes: 2 images

  Parameters of the format, GOP: M = 2, N = 30

  Codec ID: avc1

  Identifier of the codec/Info: Advanced Video Coding

  Duration: 34 min 46 s

  Bit rate mode: Variable

  Bitrate: 2 449 Kbps

  Width: 1 920 pixels

  Height: 1 080 pixels

  View picture format: 16:9

  Frame rate mode: Variable

  Rate: 18,969 fps

  Minimum frame rate: 6,522 fps

  Maximum frame rate: 19,355 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  /(pixel*Frame) bits: 0.062

  Stream size: 609 m (95%)

  Language: English

  Encoding date: UTC 2014-02-04 06:52:46

  Marking date: UTC 2014-02-04 15:27:35

  Primaries: BT.709 - 5, BT.1361, IEC 61966-2-4, SMPTE RP177

  Transfer characteristics: BT.709 - 5, BT.1361

  The matrix coefficients: BT.709 - 5, BT.1361, IEC 61966-2-4 709, SMPTE RP177

  Audio

  ID                               : 1

  Format: AAC

  Format/Info: Advanced Audio Codec

  Format profile: LC

  Codec ID: 40

  Duration: 34 min 45s

  Bit rate mode: Constant

  Bit rate: 104 Kbps

  Nominal flow rate: 128 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling frequency: 44.1 KHz

  Compression mode: lossy

  Stream size: 25.9 m (4%)

  Language: English

  Encoding date: UTC 2014-02-04 06:52:45

  Marking date: UTC 2014-02-04 15:27:35

  ============================================================

  The video matter perfectly in Final Cut Pro 10.1.1

  I have Premiere Pro of the trial and the Final Cut Pro trial. If there is no fix or get around easily, I have to give up the first.

  > Frame rate mode: Variable

  No version of first does 'good' with Variable rate

  Below is on iphone, but can help

  Some people find that the Iphone will not edit easily because it uses a variable rate

  -A possible solution in the message #22 http://forums.adobe.com/thread/934466

• Audio out of sync AFTER importation

  Hello how are you?

  I've been looking for a solution for a while, but I can't seen to find.

  The thing is... I captured some footage of gameplay, with the files that last an hour or even more.

  When I look at the files in any player (Windows Media Player, VLC, Media Player Classic), they play very well, the audio and the video seems to be on the synchronization, and click OK.

  But after I import into Adobe Premiere, it is just out of sync. Even when I look in the Source monitor before dragging to the timeline.

  It seems that there is a problem when the sponsor of audio.

  But even the length of time is different from the original, there are some frameworks or even seconds of difference inside the first.

  What is happening with different codecs AVI (from FRAPS), H.264 (with audio AAC and MP3)...

  I tried to clean the cache, remove the software and reinstall it again, conversion - all.

  Some say it is a recurring bug on Adobe Premiere. Is there a patch or something that I could do?

  It is really strange that the problems occur AFTER the import. Apart from the first is fine, so there is no problem with the catch, right?

  I would appreciate if someone can help me. Thank you very much!

  PS: I have Adobe Premiere Pro CS6.

  Intel Core i7

  12 GB OF RAM

  GeForce GTX 580

  HD 2 TO 7200 RPM

  Hey I don't know if you have found an answer to your problem to someone else, but I had the same problem before, and I've finally found a solution I would like to share.

  For my problem, it's the Visual of my webcam which became the desynchronization of audio from my webcam on top of my gameplay videos. Now, I'm not a computer genius, but I discovered that the recording devices can record in "variable framerate" or "constant framerate. If a vid becomes out of sync with itself in Adobe Premiere but not out of sync when we look outside Adobe Premiere, it's because it was recorded in "variable framerate. What variable framerate means that it cycles/changes managers at different rates throughout the video, making the video a different in Adobe Premiere as the original video outside length of Adobe Premiere.

  I downloaded a video converter called Handbrake. In Handbrake, I imported just the video I wanted to convert and edit a variable "framerate" option to "constant framerate. After that my webcam images has been transformed into "constant framerate", I imported the new webcam images in Adobe Premiere and everything was in harmony at last!

  I hope this help anyone who had the same problem.

• Visuals and Audio Out of sync

  Hello

  We try to change some sequences HD, in which case the audio and video are out of sync.

  Plays ok as a MPEG4 file on the hard disk of the computer - problem only occurs when images are imported in the first Pro CS4.  We import via the media browser.

  The problem worsens as he plays for example at the end of a 49 minutes 9 seconds audio offset.

  I read this thread, but it didn't really explain what is the cause...

  http://forums.Adobe.com/thread/436751?TSTART=30

  Here are the specifications of the sequence...

  Path: C:\Users\Administrator\My Videos\Coast10_videomaster\Nora 2 day day 1 Vp1
  Type: MPEG Movie
  File size: 10.8 GB
  Image size: 1440 x 1080
  Sampling: 32
  Frame rate: 25.00
  Audio Format: 48000 Hz - compressed - stereo
  Project Audio Format: 48000 Hz - 32 bit floating point - stereo
  Total time: 00:59:01:08
  Average: 3.1 MB/second
  Format of the pixels: 1.3333

  One wonders about the Audio Source being Format and Format Audio different project for example compressed / comma floating 32 bits?

  Someone suggested to syncronise?  but from what I can tell, it is only useful for multiple clips?

  One of the local film tutors suggests that this is a problem with not having hdv cameras is not a video sync - time and it was the fault of cameras. Apparently the only way to move which was to capture in short clips instead of a jackpot.  Used camera is a Sony V1P.

  Comments are welcome... would be very appreciated!

  Use HDVSplit to capture HDV equipment. It of free, has the scene detection, and avoids the OOS errors.

• Camileo S10 - HD (1080) video and Audio Out of sync

  HI -.

  I'm new here so please, be gentle.

  Curious to know if anyone knows a similar problem for me. I am very happy in general with the quality of the images, photographs and tapes, however, I'm having a major problem. Videos taken with the HD 1080 p resolution are horribly synchronized with the audio (and I mean horribly - about 3-4 seconds to sync) when played on PC.

  It is very good when seen and listened to on the camera LCD screen, but as soon as I watch on PC the sound is ahead of the video.
  Have you tried several methods of game back - that is to say, quicktime, realplayer, Arcsoft and VLC.
  It is of course all the other resolutions, but the entire reason for this was the promise of HD 1080 p.

  I'm doing something wrong?
  Have scoured this site to search and the user manual to see if there are a few essential settings I have missed, but to get anything done.

  Ideas or answers would be much appreciated.

  Hello

  I had the same problem with a film that I created in full HD.
  The problem was that the software didn't supports full HD video audio codec.
  I put the audio in stereo in my reading software (I use the plugin Nero).

  This helped.
  I m not sure if this will also help you but it s worth a try to change some audio settings.
  Also I recommend that you install the codec.

  I use the K-Lite Mega Codec pack
  It contains all the possible and important codecs.

• Yoga 8 Audio out of sync on YouTube

  Just wonder if anyone else has this problem.

  I have a Lenovo Yoga 8 and it is running on 4.4.2

  Whenever I have use YouTube, the video will run for a few seconds and then he is interrupted before proceeding to the back. But after it resume, audio will be out of sync. It happens to all of the video on YouTube application and regardless if I'm usign WiFi or mobile data connection.

  Update:

  There is a system update, I've seen today with the build number. 140811... applied the update and after reboot it seems that the problem has disappeared.

• Audio out of sync in TV recorded video only.

  
  I have a problem.  I have a Gateway FX7020, tuner Pinnacle PCTV 800i, Nvidia Gforce GTS 250 and, only the recorded tv is out of sync, tv live is fine!  but records are often out of sync... rarely synchronization, as 90% of the cases they are not "."  I save on a second hard drive, but it is faster than the original, I bought with the computer... Yes, all drivers are later, even the audio realtek said that vista was the latest driver but I found a newer version on the site of realtek... :(

  Hello, Tintellaar

  If this started recently, you can try a system restore to when the problem does not occur: System Restore: frequently asked questions

  You can also try installing the latest audio and video drivers directly from the manufacturers Web site, rather than through Windows Update. If you go to your manufacturers support Web site, you should be able to find the drivers for your computer. You install them just as you should install a program.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.