Import the graphic image of waveform

Similar Questions

• The graphic evolution of waveform details updated?

  Hi all, hope everyone is having a wonderful July 4.

  -Very well, so I'm new to labview and find my things around simple things well enough, but not having never taken an interest programming, Im a little behind in the logic of the machine, so I thought I would ask here.

  EDIT: using labview 2009.  Vision package

  The research that I do is to analyze the electron Speckle Pattern Interferometry (ESPI) images and their fringes to observe weaknesses points/potential fracture in different materials and others.  I made a simple VI which allows me to draw a line on the image the ESPI and exit of the intensity of the light to a waveform chart to make it easier to objectively determine the size of the area (area where the fracture is more likely to occur) plastic.

  What I would like is to be able to draw or first set the coordinates of the line, then somehow, be able to move vertically - using just my mouse or a digital controller - and have the graphic waveform updated in real time, as I do.

  Any suggestions?  Ive attatched my programs, one called "line.vi" uses digital input to determine the coordinates of the line.

  Also, since I did not sem to be able to set the bitmap images, Ive uploaded a sample of image here http://img594.imageshack.us/img594/3566/espiimage.png I don't know why imageshack converted into a PNG image if

  Thank you all

  Hi itschad,

  have you read the context-sensitive help for the chart? Here we show what kind of data you connect to draw more than one line on the graph of some...

  "Does a weird issue where once I select the line, the intensity profile keeps itself adding time and time again on the end of the table, so a table that could have initially 100 datapoints, stop of is longer and longer."

  That's how cards work. They keep a story (that you disable constantly). You can set the size of the history buffer. If the default value of 1024 points, it's too much for you, you can cut it to 100 - it is just a right click away... Otherwise, you must use a graph as a graph plots only the points that are currently wired to him (it does not keep a history of previous values).

• I've imported the new images from my camera and somehow deleted photos of my mother who were on the computer, how can I get them back?

  I need help, I imported the new photos and the next day my mother told me that she doesn't have a picture of him while he was probably because of me import new photos, I really need to get these old photographs, it is three years of images! It is a relief!

  1. download the free program Recuva by http://www.filehippo.com/download_recuva/ select a drive from the drop-down and click Scan to list everything > check Filename > Recover to recover all deleted files.

  2. in the alternative, the free food program here http://www.snapfiles.com/get/restoration.html

• Import failed halfway, how to synchronize the folder to import the remaining images?

  I have about 60 000 remaining images in different subfolders to add. When I right click on the folder and choose Synchronize folder, it detects these images. However, after a few minutes of activity (with Dees bar reading "Synchronizing folder"My Photography"of State), LR reads"there are no images to add.

  These other subfolders do not appear in the main folder of my photography, so synchronization is not past as it should.

  I don't know what I have to do here to complete the process.

  Hi bend17177429,

  It is a known issue as now, I would ask you please to manually import the images into Lightroom.

  Please read the article: https://helpx.adobe.com/lightroom/kb/synchronize-folder-failure.html

  Kind regards

  Tanuj

• CS5.5 AE can't import the RAW image sequence

  Hi all

  I'm running a complete specification of imac late 2011, with a commercial version CS5.5.

  If I try to import a sequence of images RAW (CR2) I get the following error: error After Effects: format of file Photoshop (-30504) error

  I've updated AE and all other relevant software. It works when I tried it in AE CS6 (trial), it works when I convert the CR2 files to DNG files, but I just want to be able to import RAW CR2 image sequence.

  Search on Google and forums for research has not helped a bit.

  If anyone has any advice that would be much appreciated!

  Kind regards

  Matthew
  

  You did not mention the source of your RAW files, but I'm guessing it's

  a camera that was released after shipping CS5.5, then you need to update

  ACR.

  Adobe Camera Raw for Mac updates:

  http://www.Adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

  Adobe Camera Raw for Windows updates:

  http://www.Adobe.com/support/downloads/product.jsp?product=106&platform=Windows

• MacBook keeps asking me to import the same images?

  I own a macbook pro on the latest version of el capital, and I am the owner of an iPhone on iOS 9.3 6.

  For the record I had those problems before you try our this 9.3 beta.

  I recently imported a ton of pictures that I found on my old laptop and now whenever I plug the iPhone into my macbook it will ask me to import the same pictures that I already imported previously. Not a big deal, but it's extremely annoying to have the same pictures to import again and again.

  Relevant parameter:

  I'm installing library iCloud photos and photo stream.

  I'm installing library iCloud photos and photo stream.

  ICloud library is enabled on the iPhone? With the option "Optimize storage" active?

  Then you will see again and again the same pictures in the import Panel when you connect the iPhone. The problem is, you cannot view pictures on the iPhone, without having to download the full versions of iCloud, and these downloads to iCloud will show as new photos when you connect iPhone to a USB port on your Mac.

• I can't import the .tiff images, jpeg, png

  Since my last update of the Keynotes, I can't import an image, I do not understand why, can anyone help me?

  Keynote 6.6.1 on Yosemite MacPro

  Try to reset the Keynote:

  Perform all the steps in the order listed

  For work of this procedure, you must use a removal request tool Appcleaner is free and works well for this procedure, it can be download here: Appcleaner

  • uninstall the Keynote
  • empty the trash
  • Shut Down the Mac (Apple menu > turn off)
  • Wait 10 seconds, then press the power button
  • as soon as you hear the startup tone, hold down the SHIFT key
  • release the SHIFT key when you see the gray Apple screen, start-up will take a few minutes longer than usual as the Mac performs a software repair
  • After the repair and the Mac is completely started, restart the Mac normally (Apple > restart)
  • install Keynote from the Mac App Store

• Replacement of the graphics/images/text with something else?

  Is there an easy way to replace a graphic, video, or text that is already in the timeline panel so that all effects and framing key can be applied by a new element in the same way that it was previously applied?

  This is AE base that everyone should know. If you type footage to replace in the field of research help at the top of the AE will get a step by step. Simply because it's the fourth of July, I will give you here. Select the layer in the timeline panel, you want to replace. In the project Panel, select the new replacement images. Hold down the alt/option key and drag images of replacement in the project Panel to the timeline.

  Because the text layers do not appear in the project Panel, you cannot replace the images with text. You can however put a text layer in the new model and then alt/option drag this new model in the timeline.

• difference between the graphic image and blank image

  HI Forum,

  How can I get the difference between the framework that has graphics or links placed in it.

  and

  a framework without graphics or links placed in it.

  If I say this, it is applied to two things.

  so I need to get separate alert for the framework that has put in links and frame rectangle without links...

  REC = app.documents [0].pageItems.everyItem ();

  . constructor.name if (Rec.getElements () [0] == 'Rectangle') {}

  Alert ('the image contains image');

  };

  and the other, I like to do Forum...

  Thank you very much...

  Hello

  Iterate over doc.splineItems

  and check whether doc.splineItem [i].allGraphics.length == 0

  (no graphics placed)

  Jarek

• Lightroom do not import the right image

  When I import my new EOS 5 d Mark iii Lightrome files are on some files.

  If I re - import is not the same pictures that do. If I try to import some of the files that make fail here in photoshop, it is not a problem.

  Can help?

  / Tommas

  This type of problem usually indicates a hardware problem. It could be a bad card, a hard disk of aging, a bad cable if you connect the camera directly to the computer. It is a challenge to troubleshooting, but you will have to identify which is the problem.

• "An error occurred during the import of the source image"

  I used the Tech Preview of Workstation 7.0 and tried to import a virtual appliance (OVF), but it failed in the middle.  Whenever I would try to run again, I would get the error "an error occurred when importing the source image" without even trying.  As soon as I clicked "Import or Export" I get this message.

  Thinking something was just crazy with the Tech Preview, I went back to the Workstation 6.5.3 and tried.  I get exactly the same behavior - as soon as I click on import / export I get this error message.  I tried to uninstall and reinstall Workstation 6.5.3 several times and each time I still get the error.  I guess she feels that something is waiting somewhere, but I can't.  I deleted the keys to register HKCU and HKLM associated Workstation and reinstalled without success.  I also note that it keeps the virtual machines, that I created in my favorites after uninstall/reinstall, so I guess there is another location of this info I'm not delete.

  Can someone point me in the right direction?  At this time I'm looking for a new installation of the Workstation 6.5.3.

  While performing workstation 653 on Win7PE, I noticed the same behavior. Just by clicking on import/export will give the error. The papers say; "Win32 exception: unknown exception. He followed with procmon shows nothing interesting.

  Seems to be a bug.

  Joakim

• How to print the specific image size?

  Hi Gang - How can I print an image 11 x 15 "on paper 13 x 19"?  Initially, it seems easy, but things are not how to navigate. Here's what I did:

  I exported the photo and used the dialog box LR image resize to 11 x 15 "- easy."

  I imported the exported image (assuming that the image was 11 x 15 ") and then in the LR print area - it is where the confusion begins.

  The print tab displays the dimensions of the image as 8 x10.19 in.  Help, how can I do the 11 x 15 "I need it to be?

  I understand that I will need to adjust the image to get the part I want in the space of 11 x 15, but for the moment, I can't even 11 x 15 "size.

  I tried package customized options, but no luck there.

  I would like to Print Studio Pro Canon plugin that works very well. Except, again, I don't know how to ask the image size 11 x 15 "for printing on paper 13 x 19".

  Fiddling with settings, I printed a dozen attempts and still no luck to reach 11 x 15 "size of the image on paper 13 x 19".  For now, I'm OK with the image to cut or to another plane - no baby - I need to know how to make the print image 11 x 15 "size of the image. A

  Thank you to offer suggestions.

  Screenshot shows that my image 11 x 15 "is 8x10.19; I don't know how 11 x 15 ".

  

  LR v5.7

  Mac OS X Yosemite v10.10.2

  Brain: generally intuitive, but need some help on this issue!

  The first step in the Lightroom print module is to click on the Page Setup button, select your printer, and then select the paper size. It looks like your screen to paper size correct has not been selected yet, because you said you wanted to print on paper 13 x 19 inches, but the paper on the screen is only 8.5 inches wide. My guess is that Page Setup is always programmed for letter-size paper, and you should come back on layout and change it. After you do this, if your layout Style is unique, you should be able to affect the size of the cell 11 x 15 inches.

• Import copies of images

  Hello

  I'm new to LR.  So what I want to do is to take one of my folders and import photos into LR just for fun a little with all sorts of settings, namely LR.

  But I still want to have access to the original images, without these non-significant changes.

  I imported the original images in LR database with the function 'Add' and then copied again to another location with the function 'copy', with a personalized name change.

  But even in this case, I see that when I changed an image in the folder of the copy, the original photo is edited as well, even when they have different names.

  So I don't know what to do.  I know I can 'reset' a picture of his situation, but the reset of a group of images doesn't seem to be possible?

  Are there other alternatives?

  If the goal is to experiment, why even do this way? Why try to have two "versions" of the photo in different folders, then the fight with the installation? The much easier way to do this in Lightroom is to import a photo (or use one that has already been imported), and then create a virtual copy to experiment on. When you have finished, delete the virtual copy. This is the way that you would have to do this and are so simple, and your method of using several files is so complex that I don't really like spending my brain power to figure out what you have done with several folders and not clear. Made it through virtual copies.

• How to import the logo into the clip and display it during the full clip

  Hi all

  I use Adobe Premiere Pro CS4.

  I am now a different DVD project that I've done since the time.

  Now, I'll use these them in a commercial of things if I want to add a logo on the clips to keep my rights... etc.

  Here is the situation:-

  (1) the import of the item in Adobe Premiere Pro CS4.

  (2) import the logo image I want to use.

  (3) right click on the video file and click Insert.

  Now, I want to know how to import the image file into the video so it's being there during the full clip?

  I tried several times to import it, but found that it displays seperatey after or before the clip or in the environment I want to be displayed during the entire film.

  Also, it is great when I posted I want to resize it to be in the upper right of the clamp.

  Thank you very much

  Sorry for the bad English.

  has taken more time than I thought... and it's just basic examples... may be refined more...

  with more time and reflection... .but gives you the basic ideas of... read the caches of combat and transparency... etc...

  -----------

  samples
  white background... .with hide by approach
  becomes transparent... letters, Black opaque, translucent gray

  

  transparent background
  black and white letters are shown as is with no cache by approach

  

  transparent background with matte...
  now white letters serve as mask and allow the image through only the white letters

  

• Change the bitmap image, remove background in Flash CS4?

  HI people, I tried to slide in Photoshop, a layer with a transparent background, and image but it becomes white in Flash, so I imported the psd image. However, the black background interfere with the placement of the image. In OLD flash, there was formerly a magic wand and the ability to select areas of the bitmap and delete, but it seems that the feature is now missing or hidden in the new flash.  I transformed the image bitmap and I don't want to follow, because it's a picture. So, without tracking, how you change the image as I am doing?

  Thank you

  Jeff

  The magic wand is in the same place in CS4 (select Lasso, and then it is in the area of the toolbar options).